xref: /openbmc/linux/drivers/macintosh/Kconfig (revision ba61bb17)
1
2menuconfig MACINTOSH_DRIVERS
3	bool "Macintosh device drivers"
4	depends on PPC || MAC || X86
5	default y if (PPC_PMAC || MAC)
6	---help---
7	  Say Y here to get to see options for devices used with Macintosh
8	  computers. This option alone does not add any kernel code.
9
10	  If you say N, all options in this submenu will be skipped and disabled.
11
12if MACINTOSH_DRIVERS
13
14config ADB
15	bool "Apple Desktop Bus (ADB) support"
16	depends on MAC || (PPC_PMAC && PPC32)
17	help
18	  Apple Desktop Bus (ADB) support is for support of devices which
19	  are connected to an ADB port.  ADB devices tend to have 4 pins.
20	  If you have an Apple Macintosh prior to the iMac, an iBook or
21	  PowerBook, or a "Blue and White G3", you probably want to say Y
22	  here.  Otherwise say N.
23
24config ADB_MACII
25	bool "Include Mac II ADB driver"
26	depends on ADB && MAC
27	help
28	  Say Y here if want your kernel to support Macintosh systems that use
29	  the Mac II style ADB.  This includes the II, IIx, IIcx, SE/30, IIci,
30	  Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and
31	  Centris 650.
32
33config ADB_IOP
34	bool "Include IOP (IIfx/Quadra 9x0) ADB driver"
35	depends on ADB && MAC
36	help
37	  The I/O Processor (IOP) is an Apple custom IC designed to provide
38	  intelligent support for I/O controllers.  It is described at
39	  <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct
40	  support for it, say 'Y' here.
41
42config ADB_PMU68K
43	bool "Include PMU (Powerbook) ADB driver"
44	depends on ADB && MAC
45	help
46	  Say Y here if want your kernel to support the m68k based Powerbooks.
47	  This includes the PowerBook 140, PowerBook 145, PowerBook 150,
48	  PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170,
49	  PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520,
50	  PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250,
51	  PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c.
52
53# we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU
54config ADB_CUDA
55	bool "Support for Cuda/Egret based Macs and PowerMacs"
56	depends on (ADB || PPC_PMAC) && !PPC_PMAC64
57	help
58	  This provides support for Cuda/Egret based Macintosh and
59	  Power Macintosh systems. This includes most m68k based Macs,
60	  most Old World PowerMacs, the first generation iMacs, the
61	  Blue & White G3 and the "Yikes" G4 (PCI Graphics). All later
62	  models should use CONFIG_ADB_PMU instead. It is safe to say Y
63	  here even if your machine doesn't have a Cuda or Egret device.
64
65	  If unsure say Y.
66
67config ADB_PMU
68	bool "Support for PMU  based PowerMacs"
69	depends on PPC_PMAC
70	help
71	  On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the
72	  PMU is an embedded microprocessor whose primary function is to
73	  control system power, and battery charging on the portable models.
74	  The PMU also controls the ADB (Apple Desktop Bus) which connects to
75	  the keyboard and mouse on some machines, as well as the non-volatile
76	  RAM and the RTC (real time clock) chip.  Say Y to enable support for
77	  this device; you should do so if your machine is one of those
78	  mentioned above.
79
80config ADB_PMU_LED
81	bool "Support for the Power/iBook front LED"
82	depends on ADB_PMU
83	select NEW_LEDS
84	select LEDS_CLASS
85	help
86	  Support the front LED on Power/iBooks as a generic LED that can
87	  be triggered by any of the supported triggers. To get the
88	  behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this
89	  and the disk LED trigger and configure appropriately through sysfs.
90
91config ADB_PMU_LED_DISK
92	bool "Use front LED as DISK LED by default"
93	depends on ADB_PMU_LED
94	depends on LEDS_CLASS
95	select LEDS_TRIGGERS
96	select LEDS_TRIGGER_DISK
97	help
98	  This option makes the front LED default to the disk trigger
99	  so that it blinks on disk activity.
100
101config PMAC_SMU
102	bool "Support for SMU  based PowerMacs"
103	depends on PPC_PMAC64
104	help
105	  This option adds support for the newer G5 iMacs and PowerMacs based
106	  on the "SMU" system control chip which replaces the old PMU.
107	  If you don't know, say Y.
108
109config PMAC_APM_EMU
110	tristate "APM emulation"
111	select APM_EMULATION
112	depends on ADB_PMU && PM && PPC32
113
114config PMAC_MEDIABAY
115	bool "Support PowerBook hotswap media bay"
116	depends on PPC_PMAC && PPC32 && BLOCK
117	help
118	  This option adds support for older PowerBook's hotswap media bay
119	  that can contains batteries, floppy drives, or IDE devices. PCI
120	  devices are not fully supported in the bay as I never had one to
121	  try with
122
123config PMAC_BACKLIGHT
124	bool "Backlight control for LCD screens"
125	depends on ADB_PMU && FB = y && (BROKEN || !PPC64)
126	select FB_BACKLIGHT
127	help
128	  Say Y here to enable Macintosh specific extensions of the generic
129	  backlight code. With this enabled, the brightness keys on older
130	  PowerBooks will be enabled so you can change the screen brightness.
131	  Newer models should use a userspace daemon like pbbuttonsd.
132
133config PMAC_BACKLIGHT_LEGACY
134	bool "Provide legacy ioctl's on /dev/pmu for the backlight"
135	depends on PMAC_BACKLIGHT && (BROKEN || !PPC64)
136	help
137	  Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for
138	  programs which use this old interface. New and updated programs
139	  should use the backlight classes in sysfs.
140
141config ADB_MACIO
142	bool "Include MacIO (CHRP) ADB driver"
143	depends on ADB && PPC_CHRP && !PPC_PMAC64
144	help
145	  Say Y here to include direct support for the ADB controller in the
146	  Hydra chip used on PowerPC Macintoshes of the CHRP type.  (The Hydra
147	  also includes a MESH II SCSI controller, DBDMA controller, VIA chip,
148	  OpenPIC controller and two RS422/Geoports.)
149
150config INPUT_ADBHID
151	bool "Support for ADB input devices (keyboard, mice, ...)"
152	depends on ADB && INPUT=y
153	help
154	  Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
155	  such as keyboards, mice, joysticks, trackpads  or graphic tablets
156	  handled by the input layer.  If you say Y here, make sure to say Y to
157	  the corresponding drivers "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and
158	  "Event interface support" (CONFIG_INPUT_EVDEV) as well.
159
160	  If unsure, say Y.
161
162config MAC_EMUMOUSEBTN
163	tristate "Support for mouse button 2+3 emulation"
164	depends on SYSCTL && INPUT
165	help
166	  This provides generic support for emulating the 2nd and 3rd mouse
167	  button with keypresses.  If you say Y here, the emulation is still
168	  disabled by default.  The emulation is controlled by these sysctl
169	  entries:
170	  /proc/sys/dev/mac_hid/mouse_button_emulation
171	  /proc/sys/dev/mac_hid/mouse_button2_keycode
172	  /proc/sys/dev/mac_hid/mouse_button3_keycode
173
174	  If you have an Apple machine with a 1-button mouse, say Y here.
175
176	  To compile this driver as a module, choose M here: the
177	  module will be called mac_hid.
178
179config THERM_WINDTUNNEL
180	tristate "Support for thermal management on Windtunnel G4s"
181	depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
182	help
183	  This driver provides some thermostat and fan control for the desktop
184	  G4 "Windtunnel"
185
186config THERM_ADT746X
187	tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
188	depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
189	help
190	  This driver provides some thermostat and fan control for the
191          iBook G4, and the ATI based aluminium PowerBooks, allowing slightly
192	  better fan behaviour by default, and some manual control.
193
194config WINDFARM
195	tristate "New PowerMac thermal control infrastructure"
196	depends on PPC
197
198config WINDFARM_PM81
199	tristate "Support for thermal management on iMac G5"
200	depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
201	select I2C_POWERMAC
202	help
203	  This driver provides thermal control for the iMacG5
204
205config WINDFARM_PM72
206	tristate "Support for thermal management on PowerMac G5 (AGP)"
207	depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU
208	select I2C_POWERMAC
209	help
210	  This driver provides thermal control for the PowerMac G5
211	  "AGP" variants (PowerMac 7,2 and 7,3)
212
213config WINDFARM_RM31
214	tristate "Support for thermal management on Xserve G5"
215	depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU
216	select I2C_POWERMAC
217	help
218	  This driver provides thermal control for the Xserve G5
219	  (RackMac3,1)
220
221config WINDFARM_PM91
222	tristate "Support for thermal management on PowerMac9,1"
223	depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
224	select I2C_POWERMAC
225	help
226	  This driver provides thermal control for the PowerMac9,1
227          which is the recent (SMU based) single CPU desktop G5
228
229config WINDFARM_PM112
230	tristate "Support for thermal management on PowerMac11,2"
231	depends on WINDFARM && I2C && PMAC_SMU
232	select I2C_POWERMAC
233	help
234	  This driver provides thermal control for the PowerMac11,2
235	  which are the recent dual and quad G5 machines using the
236	  970MP dual-core processor.
237
238config WINDFARM_PM121
239	tristate "Support for thermal management on PowerMac12,1"
240	depends on WINDFARM && I2C && PMAC_SMU
241	select I2C_POWERMAC
242	help
243	  This driver provides thermal control for the PowerMac12,1
244	  which is the iMac G5 (iSight).
245
246config ANSLCD
247	tristate "Support for ANS LCD display"
248	depends on ADB_CUDA && PPC_PMAC
249
250config PMAC_RACKMETER
251	tristate "Support for Apple XServe front panel LEDs"
252	depends on PPC_PMAC
253	help
254	  This driver provides some support to control the front panel
255          blue LEDs "vu-meter" of the XServer macs.
256
257config SENSORS_AMS
258	tristate "Apple Motion Sensor driver"
259	depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C)
260	select INPUT_POLLDEV
261	help
262	  Support for the motion sensor included in PowerBooks. Includes
263	  implementations for PMU and I2C.
264
265	  This driver can also be built as a module. If so, the module
266	  will be called ams.
267
268config SENSORS_AMS_PMU
269	bool "PMU variant"
270	depends on SENSORS_AMS && ADB_PMU
271	default y
272	help
273	  PMU variant of motion sensor, found in late 2005 PowerBooks.
274
275config SENSORS_AMS_I2C
276	bool "I2C variant"
277	depends on SENSORS_AMS && I2C
278	default y
279	help
280	  I2C variant of motion sensor, found in early 2005 PowerBooks and
281	  iBooks.
282
283endif # MACINTOSH_DRIVERS
284