xref: /openbmc/linux/drivers/macintosh/Kconfig (revision b074cf80)
1
2menuconfig MACINTOSH_DRIVERS
3	bool "Macintosh device drivers"
4	depends on PPC || MAC || X86
5	default y if (PPC_PMAC || MAC)
6	---help---
7	  Say Y here to get to see options for devices used with Macintosh
8	  computers. This option alone does not add any kernel code.
9
10	  If you say N, all options in this submenu will be skipped and disabled.
11
12if MACINTOSH_DRIVERS
13
14config ADB
15	bool "Apple Desktop Bus (ADB) support"
16	depends on MAC || (PPC_PMAC && PPC32)
17	help
18	  Apple Desktop Bus (ADB) support is for support of devices which
19	  are connected to an ADB port.  ADB devices tend to have 4 pins.
20	  If you have an Apple Macintosh prior to the iMac, an iBook or
21	  PowerBook, or a "Blue and White G3", you probably want to say Y
22	  here.  Otherwise say N.
23
24config ADB_MACII
25	bool "Include Mac II ADB driver"
26	depends on ADB && MAC
27	help
28	  Say Y here if want your kernel to support Macintosh systems that use
29	  the Mac II style ADB.  This includes the II, IIx, IIcx, SE/30, IIci,
30	  Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and
31	  Centris 650.
32
33config ADB_MACIISI
34	bool "Include Mac IIsi ADB driver"
35	depends on ADB && MAC && BROKEN
36	help
37	  Say Y here if want your kernel to support Macintosh systems that use
38	  the Mac IIsi style ADB.  This includes the IIsi, IIvi, IIvx, Classic
39	  II, LC, LC II, LC III, Performa 460, and the Performa 600.
40
41config ADB_IOP
42	bool "Include IOP (IIfx/Quadra 9x0) ADB driver"
43	depends on ADB && MAC
44	help
45	  The I/O Processor (IOP) is an Apple custom IC designed to provide
46	  intelligent support for I/O controllers.  It is described at
47	  <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct
48	  support for it, say 'Y' here.
49
50config ADB_PMU68K
51	bool "Include PMU (Powerbook) ADB driver"
52	depends on ADB && MAC
53	help
54	  Say Y here if want your kernel to support the m68k based Powerbooks.
55	  This includes the PowerBook 140, PowerBook 145, PowerBook 150,
56	  PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170,
57	  PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520,
58	  PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250,
59	  PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c.
60
61# we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU
62config ADB_CUDA
63	bool "Support for CUDA based Macs and PowerMacs"
64	depends on (ADB || PPC_PMAC) && !PPC_PMAC64
65	help
66	  This provides support for CUDA based Macintosh and Power Macintosh
67	  systems.  This includes many m68k based Macs (Color Classic, Mac TV,
68	  Performa 475, Performa 520, Performa 550, Performa 575,
69	  Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and
70	  Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs,
71	  the Blue&White G3 and the "Yikes" G4 (PCI Graphics).  All later
72	  models should use CONFIG_ADB_PMU instead.  It is safe to say Y here
73	  even if your machine doesn't have a CUDA.
74
75	  If unsure say Y.
76
77config ADB_PMU
78	bool "Support for PMU  based PowerMacs"
79	depends on PPC_PMAC
80	help
81	  On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the
82	  PMU is an embedded microprocessor whose primary function is to
83	  control system power, and battery charging on the portable models.
84	  The PMU also controls the ADB (Apple Desktop Bus) which connects to
85	  the keyboard and mouse on some machines, as well as the non-volatile
86	  RAM and the RTC (real time clock) chip.  Say Y to enable support for
87	  this device; you should do so if your machine is one of those
88	  mentioned above.
89
90config ADB_PMU_LED
91	bool "Support for the Power/iBook front LED"
92	depends on ADB_PMU
93	select NEW_LEDS
94	select LEDS_CLASS
95	help
96	  Support the front LED on Power/iBooks as a generic LED that can
97	  be triggered by any of the supported triggers. To get the
98	  behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this
99	  and the ide-disk LED trigger and configure appropriately through
100	  sysfs.
101
102config ADB_PMU_LED_IDE
103	bool "Use front LED as IDE LED by default"
104	depends on ADB_PMU_LED
105	depends on LEDS_CLASS
106	depends on IDE_GD_ATA
107	select LEDS_TRIGGERS
108	select LEDS_TRIGGER_IDE_DISK
109	help
110	  This option makes the front LED default to the IDE trigger
111	  so that it blinks on IDE activity.
112
113config PMAC_SMU
114	bool "Support for SMU  based PowerMacs"
115	depends on PPC_PMAC64
116	help
117	  This option adds support for the newer G5 iMacs and PowerMacs based
118	  on the "SMU" system control chip which replaces the old PMU.
119	  If you don't know, say Y.
120
121config PMAC_APM_EMU
122	tristate "APM emulation"
123	select APM_EMULATION
124	depends on ADB_PMU && PM && PPC32
125
126config PMAC_MEDIABAY
127	bool "Support PowerBook hotswap media bay"
128	depends on PPC_PMAC && PPC32 && BLOCK
129	help
130	  This option adds support for older PowerBook's hotswap media bay
131	  that can contains batteries, floppy drives, or IDE devices. PCI
132	  devices are not fully supported in the bay as I never had one to
133	  try with
134
135config PMAC_BACKLIGHT
136	bool "Backlight control for LCD screens"
137	depends on ADB_PMU && FB = y && (BROKEN || !PPC64)
138	select FB_BACKLIGHT
139	help
140	  Say Y here to enable Macintosh specific extensions of the generic
141	  backlight code. With this enabled, the brightness keys on older
142	  PowerBooks will be enabled so you can change the screen brightness.
143	  Newer models should use a userspace daemon like pbbuttonsd.
144
145config PMAC_BACKLIGHT_LEGACY
146	bool "Provide legacy ioctl's on /dev/pmu for the backlight"
147	depends on PMAC_BACKLIGHT && (BROKEN || !PPC64)
148	help
149	  Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for
150	  programs which use this old interface. New and updated programs
151	  should use the backlight classes in sysfs.
152
153config ADB_MACIO
154	bool "Include MacIO (CHRP) ADB driver"
155	depends on ADB && PPC_CHRP && !PPC_PMAC64
156	help
157	  Say Y here to include direct support for the ADB controller in the
158	  Hydra chip used on PowerPC Macintoshes of the CHRP type.  (The Hydra
159	  also includes a MESH II SCSI controller, DBDMA controller, VIA chip,
160	  OpenPIC controller and two RS422/Geoports.)
161
162config INPUT_ADBHID
163	bool "Support for ADB input devices (keyboard, mice, ...)"
164	depends on ADB && INPUT=y
165	help
166	  Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
167	  such as keyboards, mice, joysticks, trackpads  or graphic tablets
168	  handled by the input layer.  If you say Y here, make sure to say Y to
169	  the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV),
170	  "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface
171	  support" (CONFIG_INPUT_EVDEV) as well.
172
173	  If unsure, say Y.
174
175config MAC_EMUMOUSEBTN
176	tristate "Support for mouse button 2+3 emulation"
177	depends on SYSCTL && INPUT
178	help
179	  This provides generic support for emulating the 2nd and 3rd mouse
180	  button with keypresses.  If you say Y here, the emulation is still
181	  disabled by default.  The emulation is controlled by these sysctl
182	  entries:
183	  /proc/sys/dev/mac_hid/mouse_button_emulation
184	  /proc/sys/dev/mac_hid/mouse_button2_keycode
185	  /proc/sys/dev/mac_hid/mouse_button3_keycode
186
187	  If you have an Apple machine with a 1-button mouse, say Y here.
188
189	  To compile this driver as a module, choose M here: the
190	  module will be called mac_hid.
191
192config THERM_WINDTUNNEL
193	tristate "Support for thermal management on Windtunnel G4s"
194	depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
195	help
196	  This driver provides some thermostat and fan control for the desktop
197	  G4 "Windtunnel"
198
199config THERM_ADT746X
200	tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
201	depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
202	help
203	  This driver provides some thermostat and fan control for the
204          iBook G4, and the ATI based aluminium PowerBooks, allowing slightly
205	  better fan behaviour by default, and some manual control.
206
207config WINDFARM
208	tristate "New PowerMac thermal control infrastructure"
209	depends on PPC
210
211config WINDFARM_PM81
212	tristate "Support for thermal management on iMac G5"
213	depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
214	select I2C_POWERMAC
215	help
216	  This driver provides thermal control for the iMacG5
217
218config WINDFARM_PM72
219	tristate "Support for thermal management on PowerMac G5 (AGP)"
220	depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU
221	select I2C_POWERMAC
222	help
223	  This driver provides thermal control for the PowerMac G5
224	  "AGP" variants (PowerMac 7,2 and 7,3)
225
226config WINDFARM_RM31
227	tristate "Support for thermal management on Xserve G5"
228	depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU
229	select I2C_POWERMAC
230	help
231	  This driver provides thermal control for the Xserve G5
232	  (RackMac3,1)
233
234config WINDFARM_PM91
235	tristate "Support for thermal management on PowerMac9,1"
236	depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
237	select I2C_POWERMAC
238	help
239	  This driver provides thermal control for the PowerMac9,1
240          which is the recent (SMU based) single CPU desktop G5
241
242config WINDFARM_PM112
243	tristate "Support for thermal management on PowerMac11,2"
244	depends on WINDFARM && I2C && PMAC_SMU
245	select I2C_POWERMAC
246	help
247	  This driver provides thermal control for the PowerMac11,2
248	  which are the recent dual and quad G5 machines using the
249	  970MP dual-core processor.
250
251config WINDFARM_PM121
252	tristate "Support for thermal management on PowerMac12,1"
253	depends on WINDFARM && I2C && PMAC_SMU
254	select I2C_POWERMAC
255	help
256	  This driver provides thermal control for the PowerMac12,1
257	  which is the iMac G5 (iSight).
258
259config ANSLCD
260	tristate "Support for ANS LCD display"
261	depends on ADB_CUDA && PPC_PMAC
262
263config PMAC_RACKMETER
264	tristate "Support for Apple XServe front panel LEDs"
265	depends on PPC_PMAC
266	help
267	  This driver provides some support to control the front panel
268          blue LEDs "vu-meter" of the XServer macs.
269
270config SENSORS_AMS
271	tristate "Apple Motion Sensor driver"
272	depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C)
273	select INPUT_POLLDEV
274	help
275	  Support for the motion sensor included in PowerBooks. Includes
276	  implementations for PMU and I2C.
277
278	  This driver can also be built as a module. If so, the module
279	  will be called ams.
280
281config SENSORS_AMS_PMU
282	bool "PMU variant"
283	depends on SENSORS_AMS && ADB_PMU
284	default y
285	help
286	  PMU variant of motion sensor, found in late 2005 PowerBooks.
287
288config SENSORS_AMS_I2C
289	bool "I2C variant"
290	depends on SENSORS_AMS && I2C
291	default y
292	help
293	  I2C variant of motion sensor, found in early 2005 PowerBooks and
294	  iBooks.
295
296endif # MACINTOSH_DRIVERS
297