1 2menuconfig MACINTOSH_DRIVERS 3 bool "Macintosh device drivers" 4 depends on PPC || MAC || X86 5 default y if MAC 6 7if MACINTOSH_DRIVERS 8 9config ADB 10 bool "Apple Desktop Bus (ADB) support" 11 depends on MAC || (PPC_PMAC && PPC32) 12 help 13 Apple Desktop Bus (ADB) support is for support of devices which 14 are connected to an ADB port. ADB devices tend to have 4 pins. 15 If you have an Apple Macintosh prior to the iMac, an iBook or 16 PowerBook, or a "Blue and White G3", you probably want to say Y 17 here. Otherwise say N. 18 19config ADB_MACII 20 bool "Include Mac II ADB driver" 21 depends on ADB && MAC 22 help 23 Say Y here if want your kernel to support Macintosh systems that use 24 the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci, 25 Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and 26 Centris 650. 27 28config ADB_MACIISI 29 bool "Include Mac IIsi ADB driver" 30 depends on ADB && MAC 31 help 32 Say Y here if want your kernel to support Macintosh systems that use 33 the Mac IIsi style ADB. This includes the IIsi, IIvi, IIvx, Classic 34 II, LC, LC II, LC III, Performa 460, and the Performa 600. 35 36config ADB_IOP 37 bool "Include IOP (IIfx/Quadra 9x0) ADB driver" 38 depends on ADB && MAC 39 help 40 The I/O Processor (IOP) is an Apple custom IC designed to provide 41 intelligent support for I/O controllers. It is described at 42 <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct 43 support for it, say 'Y' here. 44 45config ADB_PMU68K 46 bool "Include PMU (Powerbook) ADB driver" 47 depends on ADB && MAC 48 help 49 Say Y here if want your kernel to support the m68k based Powerbooks. 50 This includes the PowerBook 140, PowerBook 145, PowerBook 150, 51 PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170, 52 PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520, 53 PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250, 54 PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c. 55 56# we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU 57config ADB_CUDA 58 bool "Support for CUDA based Macs and PowerMacs" 59 depends on (ADB || PPC_PMAC) && !PPC_PMAC64 60 help 61 This provides support for CUDA based Macintosh and Power Macintosh 62 systems. This includes many m68k based Macs (Color Classic, Mac TV, 63 Performa 475, Performa 520, Performa 550, Performa 575, 64 Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and 65 Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs, 66 the Blue&White G3 and the "Yikes" G4 (PCI Graphics). All later 67 models should use CONFIG_ADB_PMU instead. It is safe to say Y here 68 even if your machine doesn't have a CUDA. 69 70 If unsure say Y. 71 72config ADB_PMU 73 bool "Support for PMU based PowerMacs" 74 depends on PPC_PMAC 75 help 76 On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the 77 PMU is an embedded microprocessor whose primary function is to 78 control system power, and battery charging on the portable models. 79 The PMU also controls the ADB (Apple Desktop Bus) which connects to 80 the keyboard and mouse on some machines, as well as the non-volatile 81 RAM and the RTC (real time clock) chip. Say Y to enable support for 82 this device; you should do so if your machine is one of those 83 mentioned above. 84 85config ADB_PMU_LED 86 bool "Support for the Power/iBook front LED" 87 depends on ADB_PMU 88 select NEW_LEDS 89 select LEDS_CLASS 90 help 91 Support the front LED on Power/iBooks as a generic LED that can 92 be triggered by any of the supported triggers. To get the 93 behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this 94 and the ide-disk LED trigger and configure appropriately through 95 sysfs. 96 97config ADB_PMU_LED_IDE 98 bool "Use front LED as IDE LED by default" 99 depends on ADB_PMU_LED 100 select LEDS_TRIGGERS 101 select LEDS_TRIGGER_IDE_DISK 102 help 103 This option makes the front LED default to the IDE trigger 104 so that it blinks on IDE activity. 105 106config PMAC_SMU 107 bool "Support for SMU based PowerMacs" 108 depends on PPC_PMAC64 109 help 110 This option adds support for the newer G5 iMacs and PowerMacs based 111 on the "SMU" system control chip which replaces the old PMU. 112 If you don't know, say Y. 113 114config PMAC_APM_EMU 115 tristate "APM emulation" 116 select APM_EMULATION 117 depends on ADB_PMU && PM && PPC32 118 119config PMAC_MEDIABAY 120 bool "Support PowerBook hotswap media bay" 121 depends on PPC_PMAC && PPC32 122 help 123 This option adds support for older PowerBook's hotswap media bay 124 that can contains batteries, floppy drives, or IDE devices. PCI 125 devices are not fully supported in the bay as I never had one to 126 try with 127 128config PMAC_BACKLIGHT 129 bool "Backlight control for LCD screens" 130 depends on ADB_PMU && FB = y && (BROKEN || !PPC64) 131 select FB_BACKLIGHT 132 help 133 Say Y here to enable Macintosh specific extensions of the generic 134 backlight code. With this enabled, the brightness keys on older 135 PowerBooks will be enabled so you can change the screen brightness. 136 Newer models should use an userspace daemon like pbbuttonsd. 137 138config PMAC_BACKLIGHT_LEGACY 139 bool "Provide legacy ioctl's on /dev/pmu for the backlight" 140 depends on PMAC_BACKLIGHT && (BROKEN || !PPC64) 141 help 142 Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for 143 programs which use this old interface. New and updated programs 144 should use the backlight classes in sysfs. 145 146config ADB_MACIO 147 bool "Include MacIO (CHRP) ADB driver" 148 depends on ADB && PPC_CHRP && !PPC_PMAC64 149 help 150 Say Y here to include direct support for the ADB controller in the 151 Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra 152 also includes a MESH II SCSI controller, DBDMA controller, VIA chip, 153 OpenPIC controller and two RS422/Geoports.) 154 155config INPUT_ADBHID 156 bool "Support for ADB input devices (keyboard, mice, ...)" 157 depends on ADB && INPUT=y 158 help 159 Say Y here if you want to have ADB (Apple Desktop Bus) HID devices 160 such as keyboards, mice, joysticks, trackpads or graphic tablets 161 handled by the input layer. If you say Y here, make sure to say Y to 162 the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV), 163 "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface 164 support" (CONFIG_INPUT_EVDEV) as well. 165 166 If unsure, say Y. 167 168config MAC_EMUMOUSEBTN 169 bool "Support for mouse button 2+3 emulation" 170 help 171 This provides generic support for emulating the 2nd and 3rd mouse 172 button with keypresses. If you say Y here, the emulation is still 173 disabled by default. The emulation is controlled by these sysctl 174 entries: 175 /proc/sys/dev/mac_hid/mouse_button_emulation 176 /proc/sys/dev/mac_hid/mouse_button2_keycode 177 /proc/sys/dev/mac_hid/mouse_button3_keycode 178 179 If you have an Apple machine with a 1-button mouse, say Y here. 180 181config THERM_WINDTUNNEL 182 tristate "Support for thermal management on Windtunnel G4s" 183 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 184 help 185 This driver provides some thermostat and fan control for the desktop 186 G4 "Windtunnel" 187 188config THERM_ADT746X 189 tristate "Support for thermal mgmnt on laptops with ADT 746x chipset" 190 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 191 help 192 This driver provides some thermostat and fan control for the 193 iBook G4, and the ATI based aluminium PowerBooks, allowing slightly 194 better fan behaviour by default, and some manual control. 195 196config THERM_PM72 197 tristate "Support for thermal management on PowerMac G5" 198 depends on I2C && I2C_POWERMAC && PPC_PMAC64 199 help 200 This driver provides thermostat and fan control for the desktop 201 G5 machines. 202 203config WINDFARM 204 tristate "New PowerMac thermal control infrastructure" 205 depends on PPC 206 207config WINDFARM_PM81 208 tristate "Support for thermal management on iMac G5" 209 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU 210 select I2C_POWERMAC 211 help 212 This driver provides thermal control for the iMacG5 213 214config WINDFARM_PM91 215 tristate "Support for thermal management on PowerMac9,1" 216 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU 217 select I2C_POWERMAC 218 help 219 This driver provides thermal control for the PowerMac9,1 220 which is the recent (SMU based) single CPU desktop G5 221 222config WINDFARM_PM112 223 tristate "Support for thermal management on PowerMac11,2" 224 depends on WINDFARM && I2C && PMAC_SMU 225 select I2C_POWERMAC 226 help 227 This driver provides thermal control for the PowerMac11,2 228 which are the recent dual and quad G5 machines using the 229 970MP dual-core processor. 230 231config ANSLCD 232 tristate "Support for ANS LCD display" 233 depends on ADB_CUDA && PPC_PMAC 234 235config PMAC_RACKMETER 236 tristate "Support for Apple XServe front panel LEDs" 237 depends on PPC_PMAC 238 help 239 This driver provides some support to control the front panel 240 blue LEDs "vu-meter" of the XServer macs. 241 242endif # MACINTOSH_DRIVERS 243