1 2menuconfig MACINTOSH_DRIVERS 3 bool "Macintosh device drivers" 4 depends on PPC || MAC || X86 5 default y if (PPC_PMAC || MAC) 6 ---help--- 7 Say Y here to get to see options for devices used with Macintosh 8 computers. This option alone does not add any kernel code. 9 10 If you say N, all options in this submenu will be skipped and disabled. 11 12if MACINTOSH_DRIVERS 13 14config ADB 15 bool "Apple Desktop Bus (ADB) support" 16 depends on MAC || (PPC_PMAC && PPC32) 17 help 18 Apple Desktop Bus (ADB) support is for support of devices which 19 are connected to an ADB port. ADB devices tend to have 4 pins. 20 If you have an Apple Macintosh prior to the iMac, an iBook or 21 PowerBook, or a "Blue and White G3", you probably want to say Y 22 here. Otherwise say N. 23 24config ADB_MACII 25 bool "Include Mac II ADB driver" 26 depends on ADB && MAC 27 help 28 Say Y here if want your kernel to support Macintosh systems that use 29 the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci, 30 Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and 31 Centris 650. 32 33config ADB_MACIISI 34 bool "Include Mac IIsi ADB driver" 35 depends on ADB && MAC && BROKEN 36 help 37 Say Y here if want your kernel to support Macintosh systems that use 38 the Mac IIsi style ADB. This includes the IIsi, IIvi, IIvx, Classic 39 II, LC, LC II, LC III, Performa 460, and the Performa 600. 40 41config ADB_IOP 42 bool "Include IOP (IIfx/Quadra 9x0) ADB driver" 43 depends on ADB && MAC 44 help 45 The I/O Processor (IOP) is an Apple custom IC designed to provide 46 intelligent support for I/O controllers. It is described at 47 <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct 48 support for it, say 'Y' here. 49 50config ADB_PMU68K 51 bool "Include PMU (Powerbook) ADB driver" 52 depends on ADB && MAC 53 help 54 Say Y here if want your kernel to support the m68k based Powerbooks. 55 This includes the PowerBook 140, PowerBook 145, PowerBook 150, 56 PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170, 57 PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520, 58 PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250, 59 PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c. 60 61# we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU 62config ADB_CUDA 63 bool "Support for CUDA based Macs and PowerMacs" 64 depends on (ADB || PPC_PMAC) && !PPC_PMAC64 65 help 66 This provides support for CUDA based Macintosh and Power Macintosh 67 systems. This includes many m68k based Macs (Color Classic, Mac TV, 68 Performa 475, Performa 520, Performa 550, Performa 575, 69 Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and 70 Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs, 71 the Blue&White G3 and the "Yikes" G4 (PCI Graphics). All later 72 models should use CONFIG_ADB_PMU instead. It is safe to say Y here 73 even if your machine doesn't have a CUDA. 74 75 If unsure say Y. 76 77config ADB_PMU 78 bool "Support for PMU based PowerMacs" 79 depends on PPC_PMAC 80 help 81 On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the 82 PMU is an embedded microprocessor whose primary function is to 83 control system power, and battery charging on the portable models. 84 The PMU also controls the ADB (Apple Desktop Bus) which connects to 85 the keyboard and mouse on some machines, as well as the non-volatile 86 RAM and the RTC (real time clock) chip. Say Y to enable support for 87 this device; you should do so if your machine is one of those 88 mentioned above. 89 90config ADB_PMU_LED 91 bool "Support for the Power/iBook front LED" 92 depends on ADB_PMU 93 select NEW_LEDS 94 select LEDS_CLASS 95 help 96 Support the front LED on Power/iBooks as a generic LED that can 97 be triggered by any of the supported triggers. To get the 98 behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this 99 and the disk LED trigger and configure appropriately through sysfs. 100 101config ADB_PMU_LED_DISK 102 bool "Use front LED as DISK LED by default" 103 depends on ADB_PMU_LED 104 depends on LEDS_CLASS 105 depends on IDE_GD_ATA 106 select LEDS_TRIGGERS 107 select LEDS_TRIGGER_DISK 108 help 109 This option makes the front LED default to the disk trigger 110 so that it blinks on disk activity. 111 112config PMAC_SMU 113 bool "Support for SMU based PowerMacs" 114 depends on PPC_PMAC64 115 help 116 This option adds support for the newer G5 iMacs and PowerMacs based 117 on the "SMU" system control chip which replaces the old PMU. 118 If you don't know, say Y. 119 120config PMAC_APM_EMU 121 tristate "APM emulation" 122 select APM_EMULATION 123 depends on ADB_PMU && PM && PPC32 124 125config PMAC_MEDIABAY 126 bool "Support PowerBook hotswap media bay" 127 depends on PPC_PMAC && PPC32 && BLOCK 128 help 129 This option adds support for older PowerBook's hotswap media bay 130 that can contains batteries, floppy drives, or IDE devices. PCI 131 devices are not fully supported in the bay as I never had one to 132 try with 133 134config PMAC_BACKLIGHT 135 bool "Backlight control for LCD screens" 136 depends on ADB_PMU && FB = y && (BROKEN || !PPC64) 137 select FB_BACKLIGHT 138 help 139 Say Y here to enable Macintosh specific extensions of the generic 140 backlight code. With this enabled, the brightness keys on older 141 PowerBooks will be enabled so you can change the screen brightness. 142 Newer models should use a userspace daemon like pbbuttonsd. 143 144config PMAC_BACKLIGHT_LEGACY 145 bool "Provide legacy ioctl's on /dev/pmu for the backlight" 146 depends on PMAC_BACKLIGHT && (BROKEN || !PPC64) 147 help 148 Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for 149 programs which use this old interface. New and updated programs 150 should use the backlight classes in sysfs. 151 152config ADB_MACIO 153 bool "Include MacIO (CHRP) ADB driver" 154 depends on ADB && PPC_CHRP && !PPC_PMAC64 155 help 156 Say Y here to include direct support for the ADB controller in the 157 Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra 158 also includes a MESH II SCSI controller, DBDMA controller, VIA chip, 159 OpenPIC controller and two RS422/Geoports.) 160 161config INPUT_ADBHID 162 bool "Support for ADB input devices (keyboard, mice, ...)" 163 depends on ADB && INPUT=y 164 help 165 Say Y here if you want to have ADB (Apple Desktop Bus) HID devices 166 such as keyboards, mice, joysticks, trackpads or graphic tablets 167 handled by the input layer. If you say Y here, make sure to say Y to 168 the corresponding drivers "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and 169 "Event interface support" (CONFIG_INPUT_EVDEV) as well. 170 171 If unsure, say Y. 172 173config MAC_EMUMOUSEBTN 174 tristate "Support for mouse button 2+3 emulation" 175 depends on SYSCTL && INPUT 176 help 177 This provides generic support for emulating the 2nd and 3rd mouse 178 button with keypresses. If you say Y here, the emulation is still 179 disabled by default. The emulation is controlled by these sysctl 180 entries: 181 /proc/sys/dev/mac_hid/mouse_button_emulation 182 /proc/sys/dev/mac_hid/mouse_button2_keycode 183 /proc/sys/dev/mac_hid/mouse_button3_keycode 184 185 If you have an Apple machine with a 1-button mouse, say Y here. 186 187 To compile this driver as a module, choose M here: the 188 module will be called mac_hid. 189 190config THERM_WINDTUNNEL 191 tristate "Support for thermal management on Windtunnel G4s" 192 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 193 help 194 This driver provides some thermostat and fan control for the desktop 195 G4 "Windtunnel" 196 197config THERM_ADT746X 198 tristate "Support for thermal mgmnt on laptops with ADT 746x chipset" 199 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 200 help 201 This driver provides some thermostat and fan control for the 202 iBook G4, and the ATI based aluminium PowerBooks, allowing slightly 203 better fan behaviour by default, and some manual control. 204 205config WINDFARM 206 tristate "New PowerMac thermal control infrastructure" 207 depends on PPC 208 209config WINDFARM_PM81 210 tristate "Support for thermal management on iMac G5" 211 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU 212 select I2C_POWERMAC 213 help 214 This driver provides thermal control for the iMacG5 215 216config WINDFARM_PM72 217 tristate "Support for thermal management on PowerMac G5 (AGP)" 218 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU 219 select I2C_POWERMAC 220 help 221 This driver provides thermal control for the PowerMac G5 222 "AGP" variants (PowerMac 7,2 and 7,3) 223 224config WINDFARM_RM31 225 tristate "Support for thermal management on Xserve G5" 226 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU 227 select I2C_POWERMAC 228 help 229 This driver provides thermal control for the Xserve G5 230 (RackMac3,1) 231 232config WINDFARM_PM91 233 tristate "Support for thermal management on PowerMac9,1" 234 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU 235 select I2C_POWERMAC 236 help 237 This driver provides thermal control for the PowerMac9,1 238 which is the recent (SMU based) single CPU desktop G5 239 240config WINDFARM_PM112 241 tristate "Support for thermal management on PowerMac11,2" 242 depends on WINDFARM && I2C && PMAC_SMU 243 select I2C_POWERMAC 244 help 245 This driver provides thermal control for the PowerMac11,2 246 which are the recent dual and quad G5 machines using the 247 970MP dual-core processor. 248 249config WINDFARM_PM121 250 tristate "Support for thermal management on PowerMac12,1" 251 depends on WINDFARM && I2C && PMAC_SMU 252 select I2C_POWERMAC 253 help 254 This driver provides thermal control for the PowerMac12,1 255 which is the iMac G5 (iSight). 256 257config ANSLCD 258 tristate "Support for ANS LCD display" 259 depends on ADB_CUDA && PPC_PMAC 260 261config PMAC_RACKMETER 262 tristate "Support for Apple XServe front panel LEDs" 263 depends on PPC_PMAC 264 help 265 This driver provides some support to control the front panel 266 blue LEDs "vu-meter" of the XServer macs. 267 268config SENSORS_AMS 269 tristate "Apple Motion Sensor driver" 270 depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) 271 select INPUT_POLLDEV 272 help 273 Support for the motion sensor included in PowerBooks. Includes 274 implementations for PMU and I2C. 275 276 This driver can also be built as a module. If so, the module 277 will be called ams. 278 279config SENSORS_AMS_PMU 280 bool "PMU variant" 281 depends on SENSORS_AMS && ADB_PMU 282 default y 283 help 284 PMU variant of motion sensor, found in late 2005 PowerBooks. 285 286config SENSORS_AMS_I2C 287 bool "I2C variant" 288 depends on SENSORS_AMS && I2C 289 default y 290 help 291 I2C variant of motion sensor, found in early 2005 PowerBooks and 292 iBooks. 293 294endif # MACINTOSH_DRIVERS 295