1 2menu "Macintosh device drivers" 3 depends on PPC || MAC 4 5config ADB 6 bool "Apple Desktop Bus (ADB) support" 7 depends on MAC || (PPC_PMAC && PPC32) 8 help 9 Apple Desktop Bus (ADB) support is for support of devices which 10 are connected to an ADB port. ADB devices tend to have 4 pins. 11 If you have an Apple Macintosh prior to the iMac, an iBook or 12 PowerBook, or a "Blue and White G3", you probably want to say Y 13 here. Otherwise say N. 14 15config ADB_MACII 16 bool "Include Mac II ADB driver" 17 depends on ADB && MAC 18 help 19 Say Y here if want your kernel to support Macintosh systems that use 20 the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci, 21 Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and 22 Centris 650. 23 24config ADB_MACIISI 25 bool "Include Mac IIsi ADB driver" 26 depends on ADB && MAC 27 help 28 Say Y here if want your kernel to support Macintosh systems that use 29 the Mac IIsi style ADB. This includes the IIsi, IIvi, IIvx, Classic 30 II, LC, LC II, LC III, Performa 460, and the Performa 600. 31 32config ADB_IOP 33 bool "Include IOP (IIfx/Quadra 9x0) ADB driver" 34 depends on ADB && MAC 35 help 36 The I/O Processor (IOP) is an Apple custom IC designed to provide 37 intelligent support for I/O controllers. It is described at 38 <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct 39 support for it, say 'Y' here. 40 41config ADB_PMU68K 42 bool "Include PMU (Powerbook) ADB driver" 43 depends on ADB && MAC 44 help 45 Say Y here if want your kernel to support the m68k based Powerbooks. 46 This includes the PowerBook 140, PowerBook 145, PowerBook 150, 47 PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170, 48 PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520, 49 PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250, 50 PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c. 51 52# we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU 53config ADB_CUDA 54 bool "Support for CUDA based Macs and PowerMacs" 55 depends on (ADB || PPC_PMAC) && !PPC_PMAC64 56 help 57 This provides support for CUDA based Macintosh and Power Macintosh 58 systems. This includes many m68k based Macs (Color Classic, Mac TV, 59 Performa 475, Performa 520, Performa 550, Performa 575, 60 Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and 61 Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs, 62 the Blue&White G3 and the "Yikes" G4 (PCI Graphics). All later 63 models should use CONFIG_ADB_PMU instead. It is safe to say Y here 64 even if your machine doesn't have a CUDA. 65 66 If unsure say Y. 67 68config ADB_PMU 69 bool "Support for PMU based PowerMacs" 70 depends on PPC_PMAC 71 help 72 On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the 73 PMU is an embedded microprocessor whose primary function is to 74 control system power, and battery charging on the portable models. 75 The PMU also controls the ADB (Apple Desktop Bus) which connects to 76 the keyboard and mouse on some machines, as well as the non-volatile 77 RAM and the RTC (real time clock) chip. Say Y to enable support for 78 this device; you should do so if your machine is one of those 79 mentioned above. 80 81config PMAC_SMU 82 bool "Support for SMU based PowerMacs" 83 depends on PPC_PMAC64 84 help 85 This option adds support for the newer G5 iMacs and PowerMacs based 86 on the "SMU" system control chip which replaces the old PMU. 87 If you don't know, say Y. 88 89config PMAC_APM_EMU 90 tristate "APM emulation" 91 depends on PPC_PMAC && PPC32 && PM 92 93config PMAC_MEDIABAY 94 bool "Support PowerBook hotswap media bay" 95 depends on PPC_PMAC && PPC32 96 help 97 This option adds support for older PowerBook's hotswap media bay 98 that can contains batteries, floppy drives, or IDE devices. PCI 99 devices are not fully supported in the bay as I never had one to 100 try with 101 102# made a separate option since backlight may end up beeing used 103# on non-powerbook machines (but only on PMU based ones AFAIK) 104config PMAC_BACKLIGHT 105 bool "Backlight control for LCD screens" 106 depends on ADB_PMU 107 help 108 Say Y here to build in code to manage the LCD backlight on a 109 Macintosh PowerBook. With this code, the backlight will be turned 110 on and off appropriately on power-management and lid-open/lid-closed 111 events; also, the PowerBook button device will be enabled so you can 112 change the screen brightness. 113 114config ADB_MACIO 115 bool "Include MacIO (CHRP) ADB driver" 116 depends on ADB && PPC_CHRP && !PPC_PMAC64 117 help 118 Say Y here to include direct support for the ADB controller in the 119 Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra 120 also includes a MESH II SCSI controller, DBDMA controller, VIA chip, 121 OpenPIC controller and two RS422/Geoports.) 122 123config INPUT_ADBHID 124 bool "Support for ADB input devices (keyboard, mice, ...)" 125 depends on ADB && INPUT=y 126 help 127 Say Y here if you want to have ADB (Apple Desktop Bus) HID devices 128 such as keyboards, mice, joysticks, trackpads or graphic tablets 129 handled by the input layer. If you say Y here, make sure to say Y to 130 the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV), 131 "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface 132 support" (CONFIG_INPUT_EVDEV) as well. 133 134 If unsure, say Y. 135 136config MAC_EMUMOUSEBTN 137 bool "Support for mouse button 2+3 emulation" 138 depends on INPUT_ADBHID 139 help 140 This provides generic support for emulating the 2nd and 3rd mouse 141 button with keypresses. If you say Y here, the emulation is still 142 disabled by default. The emulation is controlled by these sysctl 143 entries: 144 /proc/sys/dev/mac_hid/mouse_button_emulation 145 /proc/sys/dev/mac_hid/mouse_button2_keycode 146 /proc/sys/dev/mac_hid/mouse_button3_keycode 147 148 If you have an Apple machine with a 1-button mouse, say Y here. 149 150config THERM_WINDTUNNEL 151 tristate "Support for thermal management on Windtunnel G4s" 152 depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64 153 help 154 This driver provides some thermostat and fan control for the desktop 155 G4 "Windtunnel" 156 157config THERM_ADT746X 158 tristate "Support for thermal mgmnt on laptops with ADT 746x chipset" 159 depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64 160 help 161 This driver provides some thermostat and fan control for the 162 iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty 163 better fan behaviour by default, and some manual control. 164 165config THERM_PM72 166 tristate "Support for thermal management on PowerMac G5" 167 depends on I2C && I2C_KEYWEST && PPC_PMAC64 168 help 169 This driver provides thermostat and fan control for the desktop 170 G5 machines. 171 172config ANSLCD 173 tristate "Support for ANS LCD display" 174 depends on ADB_CUDA && PPC_PMAC 175 176endmenu 177