1 2menuconfig MACINTOSH_DRIVERS 3 bool "Macintosh device drivers" 4 depends on PPC || MAC || X86 5 default y if (PPC_PMAC || MAC) 6 ---help--- 7 Say Y here to get to see options for devices used with Macintosh 8 computers. This option alone does not add any kernel code. 9 10 If you say N, all options in this submenu will be skipped and disabled. 11 12if MACINTOSH_DRIVERS 13 14config ADB 15 bool "Apple Desktop Bus (ADB) support" 16 depends on MAC || (PPC_PMAC && PPC32) 17 help 18 Apple Desktop Bus (ADB) support is for support of devices which 19 are connected to an ADB port. ADB devices tend to have 4 pins. 20 If you have an Apple Macintosh prior to the iMac, an iBook or 21 PowerBook, or a "Blue and White G3", you probably want to say Y 22 here. Otherwise say N. 23 24config ADB_MACII 25 bool "Include Mac II ADB driver" 26 depends on ADB && MAC 27 help 28 Say Y here if want your kernel to support Macintosh systems that use 29 the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci, 30 Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and 31 Centris 650. 32 33config ADB_MACIISI 34 bool "Include Mac IIsi ADB driver" 35 depends on ADB && MAC 36 help 37 Say Y here if want your kernel to support Macintosh systems that use 38 the Mac IIsi style ADB. This includes the IIsi, IIvi, IIvx, Classic 39 II, LC, LC II, LC III, Performa 460, and the Performa 600. 40 41config ADB_IOP 42 bool "Include IOP (IIfx/Quadra 9x0) ADB driver" 43 depends on ADB && MAC 44 help 45 The I/O Processor (IOP) is an Apple custom IC designed to provide 46 intelligent support for I/O controllers. It is described at 47 <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct 48 support for it, say 'Y' here. 49 50config ADB_PMU68K 51 bool "Include PMU (Powerbook) ADB driver" 52 depends on ADB && MAC 53 help 54 Say Y here if want your kernel to support the m68k based Powerbooks. 55 This includes the PowerBook 140, PowerBook 145, PowerBook 150, 56 PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170, 57 PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520, 58 PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250, 59 PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c. 60 61# we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU 62config ADB_CUDA 63 bool "Support for CUDA based Macs and PowerMacs" 64 depends on (ADB || PPC_PMAC) && !PPC_PMAC64 65 help 66 This provides support for CUDA based Macintosh and Power Macintosh 67 systems. This includes many m68k based Macs (Color Classic, Mac TV, 68 Performa 475, Performa 520, Performa 550, Performa 575, 69 Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and 70 Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs, 71 the Blue&White G3 and the "Yikes" G4 (PCI Graphics). All later 72 models should use CONFIG_ADB_PMU instead. It is safe to say Y here 73 even if your machine doesn't have a CUDA. 74 75 If unsure say Y. 76 77config ADB_PMU 78 bool "Support for PMU based PowerMacs" 79 depends on PPC_PMAC 80 help 81 On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the 82 PMU is an embedded microprocessor whose primary function is to 83 control system power, and battery charging on the portable models. 84 The PMU also controls the ADB (Apple Desktop Bus) which connects to 85 the keyboard and mouse on some machines, as well as the non-volatile 86 RAM and the RTC (real time clock) chip. Say Y to enable support for 87 this device; you should do so if your machine is one of those 88 mentioned above. 89 90config ADB_PMU_LED 91 bool "Support for the Power/iBook front LED" 92 depends on ADB_PMU 93 select NEW_LEDS 94 select LEDS_CLASS 95 help 96 Support the front LED on Power/iBooks as a generic LED that can 97 be triggered by any of the supported triggers. To get the 98 behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this 99 and the ide-disk LED trigger and configure appropriately through 100 sysfs. 101 102config ADB_PMU_LED_IDE 103 bool "Use front LED as IDE LED by default" 104 depends on ADB_PMU_LED 105 depends on LEDS_CLASS 106 select LEDS_TRIGGERS 107 select LEDS_TRIGGER_IDE_DISK 108 help 109 This option makes the front LED default to the IDE trigger 110 so that it blinks on IDE activity. 111 112config PMAC_SMU 113 bool "Support for SMU based PowerMacs" 114 depends on PPC_PMAC64 115 help 116 This option adds support for the newer G5 iMacs and PowerMacs based 117 on the "SMU" system control chip which replaces the old PMU. 118 If you don't know, say Y. 119 120config PMAC_APM_EMU 121 tristate "APM emulation" 122 select APM_EMULATION 123 depends on ADB_PMU && PM && PPC32 124 125config PMAC_MEDIABAY 126 bool "Support PowerBook hotswap media bay" 127 depends on PPC_PMAC && PPC32 && BLOCK 128 help 129 This option adds support for older PowerBook's hotswap media bay 130 that can contains batteries, floppy drives, or IDE devices. PCI 131 devices are not fully supported in the bay as I never had one to 132 try with 133 134config PMAC_BACKLIGHT 135 bool "Backlight control for LCD screens" 136 depends on ADB_PMU && FB = y && (BROKEN || !PPC64) 137 select FB_BACKLIGHT 138 help 139 Say Y here to enable Macintosh specific extensions of the generic 140 backlight code. With this enabled, the brightness keys on older 141 PowerBooks will be enabled so you can change the screen brightness. 142 Newer models should use a userspace daemon like pbbuttonsd. 143 144config PMAC_BACKLIGHT_LEGACY 145 bool "Provide legacy ioctl's on /dev/pmu for the backlight" 146 depends on PMAC_BACKLIGHT && (BROKEN || !PPC64) 147 help 148 Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for 149 programs which use this old interface. New and updated programs 150 should use the backlight classes in sysfs. 151 152config ADB_MACIO 153 bool "Include MacIO (CHRP) ADB driver" 154 depends on ADB && PPC_CHRP && !PPC_PMAC64 155 help 156 Say Y here to include direct support for the ADB controller in the 157 Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra 158 also includes a MESH II SCSI controller, DBDMA controller, VIA chip, 159 OpenPIC controller and two RS422/Geoports.) 160 161config INPUT_ADBHID 162 bool "Support for ADB input devices (keyboard, mice, ...)" 163 depends on ADB && INPUT=y 164 help 165 Say Y here if you want to have ADB (Apple Desktop Bus) HID devices 166 such as keyboards, mice, joysticks, trackpads or graphic tablets 167 handled by the input layer. If you say Y here, make sure to say Y to 168 the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV), 169 "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface 170 support" (CONFIG_INPUT_EVDEV) as well. 171 172 If unsure, say Y. 173 174config MAC_EMUMOUSEBTN 175 tristate "Support for mouse button 2+3 emulation" 176 depends on SYSCTL && INPUT 177 help 178 This provides generic support for emulating the 2nd and 3rd mouse 179 button with keypresses. If you say Y here, the emulation is still 180 disabled by default. The emulation is controlled by these sysctl 181 entries: 182 /proc/sys/dev/mac_hid/mouse_button_emulation 183 /proc/sys/dev/mac_hid/mouse_button2_keycode 184 /proc/sys/dev/mac_hid/mouse_button3_keycode 185 186 If you have an Apple machine with a 1-button mouse, say Y here. 187 188 To compile this driver as a module, choose M here: the 189 module will be called mac_hid. 190 191config THERM_WINDTUNNEL 192 tristate "Support for thermal management on Windtunnel G4s" 193 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 194 help 195 This driver provides some thermostat and fan control for the desktop 196 G4 "Windtunnel" 197 198config THERM_ADT746X 199 tristate "Support for thermal mgmnt on laptops with ADT 746x chipset" 200 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 201 help 202 This driver provides some thermostat and fan control for the 203 iBook G4, and the ATI based aluminium PowerBooks, allowing slightly 204 better fan behaviour by default, and some manual control. 205 206config THERM_PM72 207 tristate "Support for thermal management on PowerMac G5" 208 depends on I2C && I2C_POWERMAC && PPC_PMAC64 209 help 210 This driver provides thermostat and fan control for the desktop 211 G5 machines. 212 213config WINDFARM 214 tristate "New PowerMac thermal control infrastructure" 215 depends on PPC 216 217config WINDFARM_PM81 218 tristate "Support for thermal management on iMac G5" 219 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU 220 select I2C_POWERMAC 221 help 222 This driver provides thermal control for the iMacG5 223 224config WINDFARM_PM91 225 tristate "Support for thermal management on PowerMac9,1" 226 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU 227 select I2C_POWERMAC 228 help 229 This driver provides thermal control for the PowerMac9,1 230 which is the recent (SMU based) single CPU desktop G5 231 232config WINDFARM_PM112 233 tristate "Support for thermal management on PowerMac11,2" 234 depends on WINDFARM && I2C && PMAC_SMU 235 select I2C_POWERMAC 236 help 237 This driver provides thermal control for the PowerMac11,2 238 which are the recent dual and quad G5 machines using the 239 970MP dual-core processor. 240 241config WINDFARM_PM121 242 tristate "Support for thermal management on PowerMac12,1" 243 depends on WINDFARM && I2C && PMAC_SMU 244 select I2C_POWERMAC 245 help 246 This driver provides thermal control for the PowerMac12,1 247 which is the iMac G5 (iSight). 248 249config ANSLCD 250 tristate "Support for ANS LCD display" 251 depends on ADB_CUDA && PPC_PMAC 252 253config PMAC_RACKMETER 254 tristate "Support for Apple XServe front panel LEDs" 255 depends on PPC_PMAC 256 help 257 This driver provides some support to control the front panel 258 blue LEDs "vu-meter" of the XServer macs. 259 260config SENSORS_AMS 261 tristate "Apple Motion Sensor driver" 262 depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL 263 select INPUT_POLLDEV 264 help 265 Support for the motion sensor included in PowerBooks. Includes 266 implementations for PMU and I2C. 267 268 This driver can also be built as a module. If so, the module 269 will be called ams. 270 271config SENSORS_AMS_PMU 272 bool "PMU variant" 273 depends on SENSORS_AMS && ADB_PMU 274 default y 275 help 276 PMU variant of motion sensor, found in late 2005 PowerBooks. 277 278config SENSORS_AMS_I2C 279 bool "I2C variant" 280 depends on SENSORS_AMS && I2C 281 default y 282 help 283 I2C variant of motion sensor, found in early 2005 PowerBooks and 284 iBooks. 285 286endif # MACINTOSH_DRIVERS 287