xref: /openbmc/linux/drivers/macintosh/Kconfig (revision 0e865a80)
1
2menuconfig MACINTOSH_DRIVERS
3	bool "Macintosh device drivers"
4	depends on PPC || MAC || X86
5	default y if (PPC_PMAC || MAC)
6	---help---
7	  Say Y here to get to see options for devices used with Macintosh
8	  computers. This option alone does not add any kernel code.
9
10	  If you say N, all options in this submenu will be skipped and disabled.
11
12if MACINTOSH_DRIVERS
13
14config ADB
15	bool "Apple Desktop Bus (ADB) support"
16	depends on MAC || (PPC_PMAC && PPC32)
17	help
18	  Apple Desktop Bus (ADB) support is for support of devices which
19	  are connected to an ADB port.  ADB devices tend to have 4 pins.
20	  If you have an Apple Macintosh prior to the iMac, an iBook or
21	  PowerBook, or a "Blue and White G3", you probably want to say Y
22	  here.  Otherwise say N.
23
24config ADB_MACII
25	bool "Include Mac II ADB driver"
26	depends on ADB && MAC
27	help
28	  Say Y here if want your kernel to support Macintosh systems that use
29	  the Mac II style ADB.  This includes the II, IIx, IIcx, SE/30, IIci,
30	  Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and
31	  Centris 650.
32
33config ADB_MACIISI
34	bool "Include Mac IIsi ADB driver"
35	depends on ADB && MAC && BROKEN
36	help
37	  Say Y here if want your kernel to support Macintosh systems that use
38	  the Mac IIsi style ADB.  This includes the IIsi, IIvi, IIvx, Classic
39	  II, LC, LC II, LC III, Performa 460, and the Performa 600.
40
41config ADB_IOP
42	bool "Include IOP (IIfx/Quadra 9x0) ADB driver"
43	depends on ADB && MAC
44	help
45	  The I/O Processor (IOP) is an Apple custom IC designed to provide
46	  intelligent support for I/O controllers.  It is described at
47	  <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct
48	  support for it, say 'Y' here.
49
50config ADB_PMU68K
51	bool "Include PMU (Powerbook) ADB driver"
52	depends on ADB && MAC
53	help
54	  Say Y here if want your kernel to support the m68k based Powerbooks.
55	  This includes the PowerBook 140, PowerBook 145, PowerBook 150,
56	  PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170,
57	  PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520,
58	  PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250,
59	  PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c.
60
61# we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU
62config ADB_CUDA
63	bool "Support for CUDA based Macs and PowerMacs"
64	depends on (ADB || PPC_PMAC) && !PPC_PMAC64
65	help
66	  This provides support for CUDA based Macintosh and Power Macintosh
67	  systems.  This includes many m68k based Macs (Color Classic, Mac TV,
68	  Performa 475, Performa 520, Performa 550, Performa 575,
69	  Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and
70	  Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs,
71	  the Blue&White G3 and the "Yikes" G4 (PCI Graphics).  All later
72	  models should use CONFIG_ADB_PMU instead.  It is safe to say Y here
73	  even if your machine doesn't have a CUDA.
74
75	  If unsure say Y.
76
77config ADB_PMU
78	bool "Support for PMU  based PowerMacs"
79	depends on PPC_PMAC
80	help
81	  On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the
82	  PMU is an embedded microprocessor whose primary function is to
83	  control system power, and battery charging on the portable models.
84	  The PMU also controls the ADB (Apple Desktop Bus) which connects to
85	  the keyboard and mouse on some machines, as well as the non-volatile
86	  RAM and the RTC (real time clock) chip.  Say Y to enable support for
87	  this device; you should do so if your machine is one of those
88	  mentioned above.
89
90config ADB_PMU_LED
91	bool "Support for the Power/iBook front LED"
92	depends on ADB_PMU
93	select NEW_LEDS
94	select LEDS_CLASS
95	help
96	  Support the front LED on Power/iBooks as a generic LED that can
97	  be triggered by any of the supported triggers. To get the
98	  behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this
99	  and the disk LED trigger and configure appropriately through sysfs.
100
101config ADB_PMU_LED_DISK
102	bool "Use front LED as DISK LED by default"
103	depends on ADB_PMU_LED
104	depends on LEDS_CLASS
105	select LEDS_TRIGGERS
106	select LEDS_TRIGGER_DISK
107	help
108	  This option makes the front LED default to the disk trigger
109	  so that it blinks on disk activity.
110
111config PMAC_SMU
112	bool "Support for SMU  based PowerMacs"
113	depends on PPC_PMAC64
114	help
115	  This option adds support for the newer G5 iMacs and PowerMacs based
116	  on the "SMU" system control chip which replaces the old PMU.
117	  If you don't know, say Y.
118
119config PMAC_APM_EMU
120	tristate "APM emulation"
121	select APM_EMULATION
122	depends on ADB_PMU && PM && PPC32
123
124config PMAC_MEDIABAY
125	bool "Support PowerBook hotswap media bay"
126	depends on PPC_PMAC && PPC32 && BLOCK
127	help
128	  This option adds support for older PowerBook's hotswap media bay
129	  that can contains batteries, floppy drives, or IDE devices. PCI
130	  devices are not fully supported in the bay as I never had one to
131	  try with
132
133config PMAC_BACKLIGHT
134	bool "Backlight control for LCD screens"
135	depends on ADB_PMU && FB = y && (BROKEN || !PPC64)
136	select FB_BACKLIGHT
137	help
138	  Say Y here to enable Macintosh specific extensions of the generic
139	  backlight code. With this enabled, the brightness keys on older
140	  PowerBooks will be enabled so you can change the screen brightness.
141	  Newer models should use a userspace daemon like pbbuttonsd.
142
143config PMAC_BACKLIGHT_LEGACY
144	bool "Provide legacy ioctl's on /dev/pmu for the backlight"
145	depends on PMAC_BACKLIGHT && (BROKEN || !PPC64)
146	help
147	  Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for
148	  programs which use this old interface. New and updated programs
149	  should use the backlight classes in sysfs.
150
151config ADB_MACIO
152	bool "Include MacIO (CHRP) ADB driver"
153	depends on ADB && PPC_CHRP && !PPC_PMAC64
154	help
155	  Say Y here to include direct support for the ADB controller in the
156	  Hydra chip used on PowerPC Macintoshes of the CHRP type.  (The Hydra
157	  also includes a MESH II SCSI controller, DBDMA controller, VIA chip,
158	  OpenPIC controller and two RS422/Geoports.)
159
160config INPUT_ADBHID
161	bool "Support for ADB input devices (keyboard, mice, ...)"
162	depends on ADB && INPUT=y
163	help
164	  Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
165	  such as keyboards, mice, joysticks, trackpads  or graphic tablets
166	  handled by the input layer.  If you say Y here, make sure to say Y to
167	  the corresponding drivers "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and
168	  "Event interface support" (CONFIG_INPUT_EVDEV) as well.
169
170	  If unsure, say Y.
171
172config MAC_EMUMOUSEBTN
173	tristate "Support for mouse button 2+3 emulation"
174	depends on SYSCTL && INPUT
175	help
176	  This provides generic support for emulating the 2nd and 3rd mouse
177	  button with keypresses.  If you say Y here, the emulation is still
178	  disabled by default.  The emulation is controlled by these sysctl
179	  entries:
180	  /proc/sys/dev/mac_hid/mouse_button_emulation
181	  /proc/sys/dev/mac_hid/mouse_button2_keycode
182	  /proc/sys/dev/mac_hid/mouse_button3_keycode
183
184	  If you have an Apple machine with a 1-button mouse, say Y here.
185
186	  To compile this driver as a module, choose M here: the
187	  module will be called mac_hid.
188
189config THERM_WINDTUNNEL
190	tristate "Support for thermal management on Windtunnel G4s"
191	depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
192	help
193	  This driver provides some thermostat and fan control for the desktop
194	  G4 "Windtunnel"
195
196config THERM_ADT746X
197	tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
198	depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
199	help
200	  This driver provides some thermostat and fan control for the
201          iBook G4, and the ATI based aluminium PowerBooks, allowing slightly
202	  better fan behaviour by default, and some manual control.
203
204config WINDFARM
205	tristate "New PowerMac thermal control infrastructure"
206	depends on PPC
207
208config WINDFARM_PM81
209	tristate "Support for thermal management on iMac G5"
210	depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
211	select I2C_POWERMAC
212	help
213	  This driver provides thermal control for the iMacG5
214
215config WINDFARM_PM72
216	tristate "Support for thermal management on PowerMac G5 (AGP)"
217	depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU
218	select I2C_POWERMAC
219	help
220	  This driver provides thermal control for the PowerMac G5
221	  "AGP" variants (PowerMac 7,2 and 7,3)
222
223config WINDFARM_RM31
224	tristate "Support for thermal management on Xserve G5"
225	depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU
226	select I2C_POWERMAC
227	help
228	  This driver provides thermal control for the Xserve G5
229	  (RackMac3,1)
230
231config WINDFARM_PM91
232	tristate "Support for thermal management on PowerMac9,1"
233	depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
234	select I2C_POWERMAC
235	help
236	  This driver provides thermal control for the PowerMac9,1
237          which is the recent (SMU based) single CPU desktop G5
238
239config WINDFARM_PM112
240	tristate "Support for thermal management on PowerMac11,2"
241	depends on WINDFARM && I2C && PMAC_SMU
242	select I2C_POWERMAC
243	help
244	  This driver provides thermal control for the PowerMac11,2
245	  which are the recent dual and quad G5 machines using the
246	  970MP dual-core processor.
247
248config WINDFARM_PM121
249	tristate "Support for thermal management on PowerMac12,1"
250	depends on WINDFARM && I2C && PMAC_SMU
251	select I2C_POWERMAC
252	help
253	  This driver provides thermal control for the PowerMac12,1
254	  which is the iMac G5 (iSight).
255
256config ANSLCD
257	tristate "Support for ANS LCD display"
258	depends on ADB_CUDA && PPC_PMAC
259
260config PMAC_RACKMETER
261	tristate "Support for Apple XServe front panel LEDs"
262	depends on PPC_PMAC
263	help
264	  This driver provides some support to control the front panel
265          blue LEDs "vu-meter" of the XServer macs.
266
267config SENSORS_AMS
268	tristate "Apple Motion Sensor driver"
269	depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C)
270	select INPUT_POLLDEV
271	help
272	  Support for the motion sensor included in PowerBooks. Includes
273	  implementations for PMU and I2C.
274
275	  This driver can also be built as a module. If so, the module
276	  will be called ams.
277
278config SENSORS_AMS_PMU
279	bool "PMU variant"
280	depends on SENSORS_AMS && ADB_PMU
281	default y
282	help
283	  PMU variant of motion sensor, found in late 2005 PowerBooks.
284
285config SENSORS_AMS_I2C
286	bool "I2C variant"
287	depends on SENSORS_AMS && I2C
288	default y
289	help
290	  I2C variant of motion sensor, found in early 2005 PowerBooks and
291	  iBooks.
292
293endif # MACINTOSH_DRIVERS
294