1 /* 2 * leds-netxbig.c - Driver for the 2Big and 5Big Network series LEDs 3 * 4 * Copyright (C) 2010 LaCie 5 * 6 * Author: Simon Guinot <sguinot@lacie.com> 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; either version 2 of the License, or 11 * (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 21 */ 22 23 #include <linux/module.h> 24 #include <linux/irq.h> 25 #include <linux/slab.h> 26 #include <linux/spinlock.h> 27 #include <linux/platform_device.h> 28 #include <linux/gpio.h> 29 #include <linux/of_gpio.h> 30 #include <linux/leds.h> 31 #include <linux/platform_data/leds-kirkwood-netxbig.h> 32 33 /* 34 * GPIO extension bus. 35 */ 36 37 static DEFINE_SPINLOCK(gpio_ext_lock); 38 39 static void gpio_ext_set_addr(struct netxbig_gpio_ext *gpio_ext, int addr) 40 { 41 int pin; 42 43 for (pin = 0; pin < gpio_ext->num_addr; pin++) 44 gpio_set_value(gpio_ext->addr[pin], (addr >> pin) & 1); 45 } 46 47 static void gpio_ext_set_data(struct netxbig_gpio_ext *gpio_ext, int data) 48 { 49 int pin; 50 51 for (pin = 0; pin < gpio_ext->num_data; pin++) 52 gpio_set_value(gpio_ext->data[pin], (data >> pin) & 1); 53 } 54 55 static void gpio_ext_enable_select(struct netxbig_gpio_ext *gpio_ext) 56 { 57 /* Enable select is done on the raising edge. */ 58 gpio_set_value(gpio_ext->enable, 0); 59 gpio_set_value(gpio_ext->enable, 1); 60 } 61 62 static void gpio_ext_set_value(struct netxbig_gpio_ext *gpio_ext, 63 int addr, int value) 64 { 65 unsigned long flags; 66 67 spin_lock_irqsave(&gpio_ext_lock, flags); 68 gpio_ext_set_addr(gpio_ext, addr); 69 gpio_ext_set_data(gpio_ext, value); 70 gpio_ext_enable_select(gpio_ext); 71 spin_unlock_irqrestore(&gpio_ext_lock, flags); 72 } 73 74 static int gpio_ext_init(struct platform_device *pdev, 75 struct netxbig_gpio_ext *gpio_ext) 76 { 77 int err; 78 int i; 79 80 if (unlikely(!gpio_ext)) 81 return -EINVAL; 82 83 /* Configure address GPIOs. */ 84 for (i = 0; i < gpio_ext->num_addr; i++) { 85 err = devm_gpio_request_one(&pdev->dev, gpio_ext->addr[i], 86 GPIOF_OUT_INIT_LOW, 87 "GPIO extension addr"); 88 if (err) 89 return err; 90 } 91 /* Configure data GPIOs. */ 92 for (i = 0; i < gpio_ext->num_data; i++) { 93 err = devm_gpio_request_one(&pdev->dev, gpio_ext->data[i], 94 GPIOF_OUT_INIT_LOW, 95 "GPIO extension data"); 96 if (err) 97 return err; 98 } 99 /* Configure "enable select" GPIO. */ 100 err = devm_gpio_request_one(&pdev->dev, gpio_ext->enable, 101 GPIOF_OUT_INIT_LOW, 102 "GPIO extension enable"); 103 if (err) 104 return err; 105 106 return 0; 107 } 108 109 /* 110 * Class LED driver. 111 */ 112 113 struct netxbig_led_data { 114 struct netxbig_gpio_ext *gpio_ext; 115 struct led_classdev cdev; 116 int mode_addr; 117 int *mode_val; 118 int bright_addr; 119 struct netxbig_led_timer *timer; 120 int num_timer; 121 enum netxbig_led_mode mode; 122 int sata; 123 spinlock_t lock; 124 }; 125 126 static int netxbig_led_get_timer_mode(enum netxbig_led_mode *mode, 127 unsigned long delay_on, 128 unsigned long delay_off, 129 struct netxbig_led_timer *timer, 130 int num_timer) 131 { 132 int i; 133 134 for (i = 0; i < num_timer; i++) { 135 if (timer[i].delay_on == delay_on && 136 timer[i].delay_off == delay_off) { 137 *mode = timer[i].mode; 138 return 0; 139 } 140 } 141 return -EINVAL; 142 } 143 144 static int netxbig_led_blink_set(struct led_classdev *led_cdev, 145 unsigned long *delay_on, 146 unsigned long *delay_off) 147 { 148 struct netxbig_led_data *led_dat = 149 container_of(led_cdev, struct netxbig_led_data, cdev); 150 enum netxbig_led_mode mode; 151 int mode_val; 152 int ret; 153 154 /* Look for a LED mode with the requested timer frequency. */ 155 ret = netxbig_led_get_timer_mode(&mode, *delay_on, *delay_off, 156 led_dat->timer, led_dat->num_timer); 157 if (ret < 0) 158 return ret; 159 160 mode_val = led_dat->mode_val[mode]; 161 if (mode_val == NETXBIG_LED_INVALID_MODE) 162 return -EINVAL; 163 164 spin_lock_irq(&led_dat->lock); 165 166 gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val); 167 led_dat->mode = mode; 168 169 spin_unlock_irq(&led_dat->lock); 170 171 return 0; 172 } 173 174 static void netxbig_led_set(struct led_classdev *led_cdev, 175 enum led_brightness value) 176 { 177 struct netxbig_led_data *led_dat = 178 container_of(led_cdev, struct netxbig_led_data, cdev); 179 enum netxbig_led_mode mode; 180 int mode_val; 181 int set_brightness = 1; 182 unsigned long flags; 183 184 spin_lock_irqsave(&led_dat->lock, flags); 185 186 if (value == LED_OFF) { 187 mode = NETXBIG_LED_OFF; 188 set_brightness = 0; 189 } else { 190 if (led_dat->sata) 191 mode = NETXBIG_LED_SATA; 192 else if (led_dat->mode == NETXBIG_LED_OFF) 193 mode = NETXBIG_LED_ON; 194 else /* Keep 'timer' mode. */ 195 mode = led_dat->mode; 196 } 197 mode_val = led_dat->mode_val[mode]; 198 199 gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val); 200 led_dat->mode = mode; 201 /* 202 * Note that the brightness register is shared between all the 203 * SATA LEDs. So, change the brightness setting for a single 204 * SATA LED will affect all the others. 205 */ 206 if (set_brightness) 207 gpio_ext_set_value(led_dat->gpio_ext, 208 led_dat->bright_addr, value); 209 210 spin_unlock_irqrestore(&led_dat->lock, flags); 211 } 212 213 static ssize_t netxbig_led_sata_store(struct device *dev, 214 struct device_attribute *attr, 215 const char *buff, size_t count) 216 { 217 struct led_classdev *led_cdev = dev_get_drvdata(dev); 218 struct netxbig_led_data *led_dat = 219 container_of(led_cdev, struct netxbig_led_data, cdev); 220 unsigned long enable; 221 enum netxbig_led_mode mode; 222 int mode_val; 223 int ret; 224 225 ret = kstrtoul(buff, 10, &enable); 226 if (ret < 0) 227 return ret; 228 229 enable = !!enable; 230 231 spin_lock_irq(&led_dat->lock); 232 233 if (led_dat->sata == enable) { 234 ret = count; 235 goto exit_unlock; 236 } 237 238 if (led_dat->mode != NETXBIG_LED_ON && 239 led_dat->mode != NETXBIG_LED_SATA) 240 mode = led_dat->mode; /* Keep modes 'off' and 'timer'. */ 241 else if (enable) 242 mode = NETXBIG_LED_SATA; 243 else 244 mode = NETXBIG_LED_ON; 245 246 mode_val = led_dat->mode_val[mode]; 247 if (mode_val == NETXBIG_LED_INVALID_MODE) { 248 ret = -EINVAL; 249 goto exit_unlock; 250 } 251 252 gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val); 253 led_dat->mode = mode; 254 led_dat->sata = enable; 255 256 ret = count; 257 258 exit_unlock: 259 spin_unlock_irq(&led_dat->lock); 260 261 return ret; 262 } 263 264 static ssize_t netxbig_led_sata_show(struct device *dev, 265 struct device_attribute *attr, char *buf) 266 { 267 struct led_classdev *led_cdev = dev_get_drvdata(dev); 268 struct netxbig_led_data *led_dat = 269 container_of(led_cdev, struct netxbig_led_data, cdev); 270 271 return sprintf(buf, "%d\n", led_dat->sata); 272 } 273 274 static DEVICE_ATTR(sata, 0644, netxbig_led_sata_show, netxbig_led_sata_store); 275 276 static struct attribute *netxbig_led_attrs[] = { 277 &dev_attr_sata.attr, 278 NULL 279 }; 280 ATTRIBUTE_GROUPS(netxbig_led); 281 282 static int create_netxbig_led(struct platform_device *pdev, 283 struct netxbig_led_platform_data *pdata, 284 struct netxbig_led_data *led_dat, 285 const struct netxbig_led *template) 286 { 287 spin_lock_init(&led_dat->lock); 288 led_dat->gpio_ext = pdata->gpio_ext; 289 led_dat->cdev.name = template->name; 290 led_dat->cdev.default_trigger = template->default_trigger; 291 led_dat->cdev.blink_set = netxbig_led_blink_set; 292 led_dat->cdev.brightness_set = netxbig_led_set; 293 /* 294 * Because the GPIO extension bus don't allow to read registers 295 * value, there is no way to probe the LED initial state. 296 * So, the initial sysfs LED value for the "brightness" and "sata" 297 * attributes are inconsistent. 298 * 299 * Note that the initial LED state can't be reconfigured. 300 * The reason is that the LED behaviour must stay uniform during 301 * the whole boot process (bootloader+linux). 302 */ 303 led_dat->sata = 0; 304 led_dat->cdev.brightness = LED_OFF; 305 led_dat->cdev.max_brightness = template->bright_max; 306 led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; 307 led_dat->mode_addr = template->mode_addr; 308 led_dat->mode_val = template->mode_val; 309 led_dat->bright_addr = template->bright_addr; 310 led_dat->timer = pdata->timer; 311 led_dat->num_timer = pdata->num_timer; 312 /* 313 * If available, expose the SATA activity blink capability through 314 * a "sata" sysfs attribute. 315 */ 316 if (led_dat->mode_val[NETXBIG_LED_SATA] != NETXBIG_LED_INVALID_MODE) 317 led_dat->cdev.groups = netxbig_led_groups; 318 319 return devm_led_classdev_register(&pdev->dev, &led_dat->cdev); 320 } 321 322 #ifdef CONFIG_OF_GPIO 323 static int gpio_ext_get_of_pdata(struct device *dev, struct device_node *np, 324 struct netxbig_gpio_ext *gpio_ext) 325 { 326 int *addr, *data; 327 int num_addr, num_data; 328 int ret; 329 int i; 330 331 ret = of_gpio_named_count(np, "addr-gpios"); 332 if (ret < 0) { 333 dev_err(dev, 334 "Failed to count GPIOs in DT property addr-gpios\n"); 335 return ret; 336 } 337 num_addr = ret; 338 addr = devm_kzalloc(dev, num_addr * sizeof(*addr), GFP_KERNEL); 339 if (!addr) 340 return -ENOMEM; 341 342 for (i = 0; i < num_addr; i++) { 343 ret = of_get_named_gpio(np, "addr-gpios", i); 344 if (ret < 0) 345 return ret; 346 addr[i] = ret; 347 } 348 gpio_ext->addr = addr; 349 gpio_ext->num_addr = num_addr; 350 351 ret = of_gpio_named_count(np, "data-gpios"); 352 if (ret < 0) { 353 dev_err(dev, 354 "Failed to count GPIOs in DT property data-gpios\n"); 355 return ret; 356 } 357 num_data = ret; 358 data = devm_kzalloc(dev, num_data * sizeof(*data), GFP_KERNEL); 359 if (!data) 360 return -ENOMEM; 361 362 for (i = 0; i < num_data; i++) { 363 ret = of_get_named_gpio(np, "data-gpios", i); 364 if (ret < 0) 365 return ret; 366 data[i] = ret; 367 } 368 gpio_ext->data = data; 369 gpio_ext->num_data = num_data; 370 371 ret = of_get_named_gpio(np, "enable-gpio", 0); 372 if (ret < 0) { 373 dev_err(dev, 374 "Failed to get GPIO from DT property enable-gpio\n"); 375 return ret; 376 } 377 gpio_ext->enable = ret; 378 379 return 0; 380 } 381 382 static int netxbig_leds_get_of_pdata(struct device *dev, 383 struct netxbig_led_platform_data *pdata) 384 { 385 struct device_node *np = dev->of_node; 386 struct device_node *gpio_ext_np; 387 struct device_node *child; 388 struct netxbig_gpio_ext *gpio_ext; 389 struct netxbig_led_timer *timers; 390 struct netxbig_led *leds, *led; 391 int num_timers; 392 int num_leds = 0; 393 int ret; 394 int i; 395 396 /* GPIO extension */ 397 gpio_ext_np = of_parse_phandle(np, "gpio-ext", 0); 398 if (!gpio_ext_np) { 399 dev_err(dev, "Failed to get DT handle gpio-ext\n"); 400 return -EINVAL; 401 } 402 403 gpio_ext = devm_kzalloc(dev, sizeof(*gpio_ext), GFP_KERNEL); 404 if (!gpio_ext) 405 return -ENOMEM; 406 ret = gpio_ext_get_of_pdata(dev, gpio_ext_np, gpio_ext); 407 if (ret) 408 return ret; 409 of_node_put(gpio_ext_np); 410 pdata->gpio_ext = gpio_ext; 411 412 /* Timers (optional) */ 413 ret = of_property_count_u32_elems(np, "timers"); 414 if (ret > 0) { 415 if (ret % 3) 416 return -EINVAL; 417 num_timers = ret / 3; 418 timers = devm_kzalloc(dev, num_timers * sizeof(*timers), 419 GFP_KERNEL); 420 if (!timers) 421 return -ENOMEM; 422 for (i = 0; i < num_timers; i++) { 423 u32 tmp; 424 425 of_property_read_u32_index(np, "timers", 3 * i, 426 &timers[i].mode); 427 if (timers[i].mode >= NETXBIG_LED_MODE_NUM) 428 return -EINVAL; 429 of_property_read_u32_index(np, "timers", 430 3 * i + 1, &tmp); 431 timers[i].delay_on = tmp; 432 of_property_read_u32_index(np, "timers", 433 3 * i + 2, &tmp); 434 timers[i].delay_off = tmp; 435 } 436 pdata->timer = timers; 437 pdata->num_timer = num_timers; 438 } 439 440 /* LEDs */ 441 num_leds = of_get_child_count(np); 442 if (!num_leds) { 443 dev_err(dev, "No LED subnodes found in DT\n"); 444 return -ENODEV; 445 } 446 447 leds = devm_kzalloc(dev, num_leds * sizeof(*leds), GFP_KERNEL); 448 if (!leds) 449 return -ENOMEM; 450 451 led = leds; 452 for_each_child_of_node(np, child) { 453 const char *string; 454 int *mode_val; 455 int num_modes; 456 457 ret = of_property_read_u32(child, "mode-addr", 458 &led->mode_addr); 459 if (ret) 460 goto err_node_put; 461 462 ret = of_property_read_u32(child, "bright-addr", 463 &led->bright_addr); 464 if (ret) 465 goto err_node_put; 466 467 ret = of_property_read_u32(child, "max-brightness", 468 &led->bright_max); 469 if (ret) 470 goto err_node_put; 471 472 mode_val = 473 devm_kzalloc(dev, 474 NETXBIG_LED_MODE_NUM * sizeof(*mode_val), 475 GFP_KERNEL); 476 if (!mode_val) { 477 ret = -ENOMEM; 478 goto err_node_put; 479 } 480 481 for (i = 0; i < NETXBIG_LED_MODE_NUM; i++) 482 mode_val[i] = NETXBIG_LED_INVALID_MODE; 483 484 ret = of_property_count_u32_elems(child, "mode-val"); 485 if (ret < 0 || ret % 2) { 486 ret = -EINVAL; 487 goto err_node_put; 488 } 489 num_modes = ret / 2; 490 if (num_modes > NETXBIG_LED_MODE_NUM) { 491 ret = -EINVAL; 492 goto err_node_put; 493 } 494 495 for (i = 0; i < num_modes; i++) { 496 int mode; 497 int val; 498 499 of_property_read_u32_index(child, 500 "mode-val", 2 * i, &mode); 501 of_property_read_u32_index(child, 502 "mode-val", 2 * i + 1, &val); 503 if (mode >= NETXBIG_LED_MODE_NUM) { 504 ret = -EINVAL; 505 goto err_node_put; 506 } 507 mode_val[mode] = val; 508 } 509 led->mode_val = mode_val; 510 511 if (!of_property_read_string(child, "label", &string)) 512 led->name = string; 513 else 514 led->name = child->name; 515 516 if (!of_property_read_string(child, 517 "linux,default-trigger", &string)) 518 led->default_trigger = string; 519 520 led++; 521 } 522 523 pdata->leds = leds; 524 pdata->num_leds = num_leds; 525 526 return 0; 527 528 err_node_put: 529 of_node_put(child); 530 return ret; 531 } 532 533 static const struct of_device_id of_netxbig_leds_match[] = { 534 { .compatible = "lacie,netxbig-leds", }, 535 {}, 536 }; 537 #else 538 static inline int 539 netxbig_leds_get_of_pdata(struct device *dev, 540 struct netxbig_led_platform_data *pdata) 541 { 542 return -ENODEV; 543 } 544 #endif /* CONFIG_OF_GPIO */ 545 546 static int netxbig_led_probe(struct platform_device *pdev) 547 { 548 struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev); 549 struct netxbig_led_data *leds_data; 550 int i; 551 int ret; 552 553 if (!pdata) { 554 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); 555 if (!pdata) 556 return -ENOMEM; 557 ret = netxbig_leds_get_of_pdata(&pdev->dev, pdata); 558 if (ret) 559 return ret; 560 } 561 562 leds_data = devm_kzalloc(&pdev->dev, 563 pdata->num_leds * sizeof(*leds_data), 564 GFP_KERNEL); 565 if (!leds_data) 566 return -ENOMEM; 567 568 ret = gpio_ext_init(pdev, pdata->gpio_ext); 569 if (ret < 0) 570 return ret; 571 572 for (i = 0; i < pdata->num_leds; i++) { 573 ret = create_netxbig_led(pdev, pdata, 574 &leds_data[i], &pdata->leds[i]); 575 if (ret < 0) 576 return ret; 577 } 578 579 return 0; 580 } 581 582 static struct platform_driver netxbig_led_driver = { 583 .probe = netxbig_led_probe, 584 .driver = { 585 .name = "leds-netxbig", 586 .of_match_table = of_match_ptr(of_netxbig_leds_match), 587 }, 588 }; 589 590 module_platform_driver(netxbig_led_driver); 591 592 MODULE_AUTHOR("Simon Guinot <sguinot@lacie.com>"); 593 MODULE_DESCRIPTION("LED driver for LaCie xBig Network boards"); 594 MODULE_LICENSE("GPL"); 595 MODULE_ALIAS("platform:leds-netxbig"); 596