1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * TI LP8860 4-Channel LED Driver 4 * 5 * Copyright (C) 2014 Texas Instruments 6 * 7 * Author: Dan Murphy <dmurphy@ti.com> 8 */ 9 10 #include <linux/i2c.h> 11 #include <linux/init.h> 12 #include <linux/leds.h> 13 #include <linux/regmap.h> 14 #include <linux/regulator/consumer.h> 15 #include <linux/module.h> 16 #include <linux/mutex.h> 17 #include <linux/of.h> 18 #include <linux/gpio/consumer.h> 19 #include <linux/slab.h> 20 21 #define LP8860_DISP_CL1_BRT_MSB 0x00 22 #define LP8860_DISP_CL1_BRT_LSB 0x01 23 #define LP8860_DISP_CL1_CURR_MSB 0x02 24 #define LP8860_DISP_CL1_CURR_LSB 0x03 25 #define LP8860_CL2_BRT_MSB 0x04 26 #define LP8860_CL2_BRT_LSB 0x05 27 #define LP8860_CL2_CURRENT 0x06 28 #define LP8860_CL3_BRT_MSB 0x07 29 #define LP8860_CL3_BRT_LSB 0x08 30 #define LP8860_CL3_CURRENT 0x09 31 #define LP8860_CL4_BRT_MSB 0x0a 32 #define LP8860_CL4_BRT_LSB 0x0b 33 #define LP8860_CL4_CURRENT 0x0c 34 #define LP8860_CONFIG 0x0d 35 #define LP8860_STATUS 0x0e 36 #define LP8860_FAULT 0x0f 37 #define LP8860_LED_FAULT 0x10 38 #define LP8860_FAULT_CLEAR 0x11 39 #define LP8860_ID 0x12 40 #define LP8860_TEMP_MSB 0x13 41 #define LP8860_TEMP_LSB 0x14 42 #define LP8860_DISP_LED_CURR_MSB 0x15 43 #define LP8860_DISP_LED_CURR_LSB 0x16 44 #define LP8860_DISP_LED_PWM_MSB 0x17 45 #define LP8860_DISP_LED_PWM_LSB 0x18 46 #define LP8860_EEPROM_CNTRL 0x19 47 #define LP8860_EEPROM_UNLOCK 0x1a 48 49 #define LP8860_EEPROM_REG_0 0x60 50 #define LP8860_EEPROM_REG_1 0x61 51 #define LP8860_EEPROM_REG_2 0x62 52 #define LP8860_EEPROM_REG_3 0x63 53 #define LP8860_EEPROM_REG_4 0x64 54 #define LP8860_EEPROM_REG_5 0x65 55 #define LP8860_EEPROM_REG_6 0x66 56 #define LP8860_EEPROM_REG_7 0x67 57 #define LP8860_EEPROM_REG_8 0x68 58 #define LP8860_EEPROM_REG_9 0x69 59 #define LP8860_EEPROM_REG_10 0x6a 60 #define LP8860_EEPROM_REG_11 0x6b 61 #define LP8860_EEPROM_REG_12 0x6c 62 #define LP8860_EEPROM_REG_13 0x6d 63 #define LP8860_EEPROM_REG_14 0x6e 64 #define LP8860_EEPROM_REG_15 0x6f 65 #define LP8860_EEPROM_REG_16 0x70 66 #define LP8860_EEPROM_REG_17 0x71 67 #define LP8860_EEPROM_REG_18 0x72 68 #define LP8860_EEPROM_REG_19 0x73 69 #define LP8860_EEPROM_REG_20 0x74 70 #define LP8860_EEPROM_REG_21 0x75 71 #define LP8860_EEPROM_REG_22 0x76 72 #define LP8860_EEPROM_REG_23 0x77 73 #define LP8860_EEPROM_REG_24 0x78 74 75 #define LP8860_LOCK_EEPROM 0x00 76 #define LP8860_UNLOCK_EEPROM 0x01 77 #define LP8860_PROGRAM_EEPROM 0x02 78 #define LP8860_EEPROM_CODE_1 0x08 79 #define LP8860_EEPROM_CODE_2 0xba 80 #define LP8860_EEPROM_CODE_3 0xef 81 82 #define LP8860_CLEAR_FAULTS 0x01 83 84 #define LP8860_NAME "lp8860" 85 86 /** 87 * struct lp8860_led 88 * @lock: Lock for reading/writing the device 89 * @client: Pointer to the I2C client 90 * @led_dev: led class device pointer 91 * @regmap: Devices register map 92 * @eeprom_regmap: EEPROM register map 93 * @enable_gpio: VDDIO/EN gpio to enable communication interface 94 * @regulator: LED supply regulator pointer 95 */ 96 struct lp8860_led { 97 struct mutex lock; 98 struct i2c_client *client; 99 struct led_classdev led_dev; 100 struct regmap *regmap; 101 struct regmap *eeprom_regmap; 102 struct gpio_desc *enable_gpio; 103 struct regulator *regulator; 104 }; 105 106 struct lp8860_eeprom_reg { 107 uint8_t reg; 108 uint8_t value; 109 }; 110 111 static struct lp8860_eeprom_reg lp8860_eeprom_disp_regs[] = { 112 { LP8860_EEPROM_REG_0, 0xed }, 113 { LP8860_EEPROM_REG_1, 0xdf }, 114 { LP8860_EEPROM_REG_2, 0xdc }, 115 { LP8860_EEPROM_REG_3, 0xf0 }, 116 { LP8860_EEPROM_REG_4, 0xdf }, 117 { LP8860_EEPROM_REG_5, 0xe5 }, 118 { LP8860_EEPROM_REG_6, 0xf2 }, 119 { LP8860_EEPROM_REG_7, 0x77 }, 120 { LP8860_EEPROM_REG_8, 0x77 }, 121 { LP8860_EEPROM_REG_9, 0x71 }, 122 { LP8860_EEPROM_REG_10, 0x3f }, 123 { LP8860_EEPROM_REG_11, 0xb7 }, 124 { LP8860_EEPROM_REG_12, 0x17 }, 125 { LP8860_EEPROM_REG_13, 0xef }, 126 { LP8860_EEPROM_REG_14, 0xb0 }, 127 { LP8860_EEPROM_REG_15, 0x87 }, 128 { LP8860_EEPROM_REG_16, 0xce }, 129 { LP8860_EEPROM_REG_17, 0x72 }, 130 { LP8860_EEPROM_REG_18, 0xe5 }, 131 { LP8860_EEPROM_REG_19, 0xdf }, 132 { LP8860_EEPROM_REG_20, 0x35 }, 133 { LP8860_EEPROM_REG_21, 0x06 }, 134 { LP8860_EEPROM_REG_22, 0xdc }, 135 { LP8860_EEPROM_REG_23, 0x88 }, 136 { LP8860_EEPROM_REG_24, 0x3E }, 137 }; 138 139 static int lp8860_unlock_eeprom(struct lp8860_led *led, int lock) 140 { 141 int ret; 142 143 mutex_lock(&led->lock); 144 145 if (lock == LP8860_UNLOCK_EEPROM) { 146 ret = regmap_write(led->regmap, 147 LP8860_EEPROM_UNLOCK, 148 LP8860_EEPROM_CODE_1); 149 if (ret) { 150 dev_err(&led->client->dev, "EEPROM Unlock failed\n"); 151 goto out; 152 } 153 154 ret = regmap_write(led->regmap, 155 LP8860_EEPROM_UNLOCK, 156 LP8860_EEPROM_CODE_2); 157 if (ret) { 158 dev_err(&led->client->dev, "EEPROM Unlock failed\n"); 159 goto out; 160 } 161 ret = regmap_write(led->regmap, 162 LP8860_EEPROM_UNLOCK, 163 LP8860_EEPROM_CODE_3); 164 if (ret) { 165 dev_err(&led->client->dev, "EEPROM Unlock failed\n"); 166 goto out; 167 } 168 } else { 169 ret = regmap_write(led->regmap, 170 LP8860_EEPROM_UNLOCK, 171 LP8860_LOCK_EEPROM); 172 } 173 174 out: 175 mutex_unlock(&led->lock); 176 return ret; 177 } 178 179 static int lp8860_fault_check(struct lp8860_led *led) 180 { 181 int ret, fault; 182 unsigned int read_buf; 183 184 ret = regmap_read(led->regmap, LP8860_LED_FAULT, &read_buf); 185 if (ret) 186 goto out; 187 188 fault = read_buf; 189 190 ret = regmap_read(led->regmap, LP8860_FAULT, &read_buf); 191 if (ret) 192 goto out; 193 194 fault |= read_buf; 195 196 /* Attempt to clear any faults */ 197 if (fault) 198 ret = regmap_write(led->regmap, LP8860_FAULT_CLEAR, 199 LP8860_CLEAR_FAULTS); 200 out: 201 return ret; 202 } 203 204 static int lp8860_brightness_set(struct led_classdev *led_cdev, 205 enum led_brightness brt_val) 206 { 207 struct lp8860_led *led = 208 container_of(led_cdev, struct lp8860_led, led_dev); 209 int disp_brightness = brt_val * 255; 210 int ret; 211 212 mutex_lock(&led->lock); 213 214 ret = lp8860_fault_check(led); 215 if (ret) { 216 dev_err(&led->client->dev, "Cannot read/clear faults\n"); 217 goto out; 218 } 219 220 ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_MSB, 221 (disp_brightness & 0xff00) >> 8); 222 if (ret) { 223 dev_err(&led->client->dev, "Cannot write CL1 MSB\n"); 224 goto out; 225 } 226 227 ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_LSB, 228 disp_brightness & 0xff); 229 if (ret) { 230 dev_err(&led->client->dev, "Cannot write CL1 LSB\n"); 231 goto out; 232 } 233 out: 234 mutex_unlock(&led->lock); 235 return ret; 236 } 237 238 static int lp8860_init(struct lp8860_led *led) 239 { 240 unsigned int read_buf; 241 int ret, i, reg_count; 242 243 if (led->regulator) { 244 ret = regulator_enable(led->regulator); 245 if (ret) { 246 dev_err(&led->client->dev, 247 "Failed to enable regulator\n"); 248 return ret; 249 } 250 } 251 252 gpiod_direction_output(led->enable_gpio, 1); 253 254 ret = lp8860_fault_check(led); 255 if (ret) 256 goto out; 257 258 ret = regmap_read(led->regmap, LP8860_STATUS, &read_buf); 259 if (ret) 260 goto out; 261 262 ret = lp8860_unlock_eeprom(led, LP8860_UNLOCK_EEPROM); 263 if (ret) { 264 dev_err(&led->client->dev, "Failed unlocking EEPROM\n"); 265 goto out; 266 } 267 268 reg_count = ARRAY_SIZE(lp8860_eeprom_disp_regs) / sizeof(lp8860_eeprom_disp_regs[0]); 269 for (i = 0; i < reg_count; i++) { 270 ret = regmap_write(led->eeprom_regmap, 271 lp8860_eeprom_disp_regs[i].reg, 272 lp8860_eeprom_disp_regs[i].value); 273 if (ret) { 274 dev_err(&led->client->dev, "Failed writing EEPROM\n"); 275 goto out; 276 } 277 } 278 279 ret = lp8860_unlock_eeprom(led, LP8860_LOCK_EEPROM); 280 if (ret) 281 goto out; 282 283 ret = regmap_write(led->regmap, 284 LP8860_EEPROM_CNTRL, 285 LP8860_PROGRAM_EEPROM); 286 if (ret) { 287 dev_err(&led->client->dev, "Failed programming EEPROM\n"); 288 goto out; 289 } 290 291 return ret; 292 293 out: 294 if (ret) 295 gpiod_direction_output(led->enable_gpio, 0); 296 297 if (led->regulator) { 298 ret = regulator_disable(led->regulator); 299 if (ret) 300 dev_err(&led->client->dev, 301 "Failed to disable regulator\n"); 302 } 303 304 return ret; 305 } 306 307 static const struct reg_default lp8860_reg_defs[] = { 308 { LP8860_DISP_CL1_BRT_MSB, 0x00}, 309 { LP8860_DISP_CL1_BRT_LSB, 0x00}, 310 { LP8860_DISP_CL1_CURR_MSB, 0x00}, 311 { LP8860_DISP_CL1_CURR_LSB, 0x00}, 312 { LP8860_CL2_BRT_MSB, 0x00}, 313 { LP8860_CL2_BRT_LSB, 0x00}, 314 { LP8860_CL2_CURRENT, 0x00}, 315 { LP8860_CL3_BRT_MSB, 0x00}, 316 { LP8860_CL3_BRT_LSB, 0x00}, 317 { LP8860_CL3_CURRENT, 0x00}, 318 { LP8860_CL4_BRT_MSB, 0x00}, 319 { LP8860_CL4_BRT_LSB, 0x00}, 320 { LP8860_CL4_CURRENT, 0x00}, 321 { LP8860_CONFIG, 0x00}, 322 { LP8860_FAULT_CLEAR, 0x00}, 323 { LP8860_EEPROM_CNTRL, 0x80}, 324 { LP8860_EEPROM_UNLOCK, 0x00}, 325 }; 326 327 static const struct regmap_config lp8860_regmap_config = { 328 .reg_bits = 8, 329 .val_bits = 8, 330 331 .max_register = LP8860_EEPROM_UNLOCK, 332 .reg_defaults = lp8860_reg_defs, 333 .num_reg_defaults = ARRAY_SIZE(lp8860_reg_defs), 334 .cache_type = REGCACHE_NONE, 335 }; 336 337 static const struct reg_default lp8860_eeprom_defs[] = { 338 { LP8860_EEPROM_REG_0, 0x00 }, 339 { LP8860_EEPROM_REG_1, 0x00 }, 340 { LP8860_EEPROM_REG_2, 0x00 }, 341 { LP8860_EEPROM_REG_3, 0x00 }, 342 { LP8860_EEPROM_REG_4, 0x00 }, 343 { LP8860_EEPROM_REG_5, 0x00 }, 344 { LP8860_EEPROM_REG_6, 0x00 }, 345 { LP8860_EEPROM_REG_7, 0x00 }, 346 { LP8860_EEPROM_REG_8, 0x00 }, 347 { LP8860_EEPROM_REG_9, 0x00 }, 348 { LP8860_EEPROM_REG_10, 0x00 }, 349 { LP8860_EEPROM_REG_11, 0x00 }, 350 { LP8860_EEPROM_REG_12, 0x00 }, 351 { LP8860_EEPROM_REG_13, 0x00 }, 352 { LP8860_EEPROM_REG_14, 0x00 }, 353 { LP8860_EEPROM_REG_15, 0x00 }, 354 { LP8860_EEPROM_REG_16, 0x00 }, 355 { LP8860_EEPROM_REG_17, 0x00 }, 356 { LP8860_EEPROM_REG_18, 0x00 }, 357 { LP8860_EEPROM_REG_19, 0x00 }, 358 { LP8860_EEPROM_REG_20, 0x00 }, 359 { LP8860_EEPROM_REG_21, 0x00 }, 360 { LP8860_EEPROM_REG_22, 0x00 }, 361 { LP8860_EEPROM_REG_23, 0x00 }, 362 { LP8860_EEPROM_REG_24, 0x00 }, 363 }; 364 365 static const struct regmap_config lp8860_eeprom_regmap_config = { 366 .reg_bits = 8, 367 .val_bits = 8, 368 369 .max_register = LP8860_EEPROM_REG_24, 370 .reg_defaults = lp8860_eeprom_defs, 371 .num_reg_defaults = ARRAY_SIZE(lp8860_eeprom_defs), 372 .cache_type = REGCACHE_NONE, 373 }; 374 375 static int lp8860_probe(struct i2c_client *client) 376 { 377 int ret; 378 struct lp8860_led *led; 379 struct device_node *np = dev_of_node(&client->dev); 380 struct device_node *child_node; 381 struct led_init_data init_data = {}; 382 383 led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL); 384 if (!led) 385 return -ENOMEM; 386 387 child_node = of_get_next_available_child(np, NULL); 388 if (!child_node) 389 return -EINVAL; 390 391 led->enable_gpio = devm_gpiod_get_optional(&client->dev, 392 "enable", GPIOD_OUT_LOW); 393 if (IS_ERR(led->enable_gpio)) { 394 ret = PTR_ERR(led->enable_gpio); 395 dev_err(&client->dev, "Failed to get enable gpio: %d\n", ret); 396 return ret; 397 } 398 399 led->regulator = devm_regulator_get(&client->dev, "vled"); 400 if (IS_ERR(led->regulator)) 401 led->regulator = NULL; 402 403 led->client = client; 404 led->led_dev.brightness_set_blocking = lp8860_brightness_set; 405 406 mutex_init(&led->lock); 407 408 i2c_set_clientdata(client, led); 409 410 led->regmap = devm_regmap_init_i2c(client, &lp8860_regmap_config); 411 if (IS_ERR(led->regmap)) { 412 ret = PTR_ERR(led->regmap); 413 dev_err(&client->dev, "Failed to allocate register map: %d\n", 414 ret); 415 return ret; 416 } 417 418 led->eeprom_regmap = devm_regmap_init_i2c(client, &lp8860_eeprom_regmap_config); 419 if (IS_ERR(led->eeprom_regmap)) { 420 ret = PTR_ERR(led->eeprom_regmap); 421 dev_err(&client->dev, "Failed to allocate register map: %d\n", 422 ret); 423 return ret; 424 } 425 426 ret = lp8860_init(led); 427 if (ret) 428 return ret; 429 430 init_data.fwnode = of_fwnode_handle(child_node); 431 init_data.devicename = LP8860_NAME; 432 init_data.default_label = ":display_cluster"; 433 434 ret = devm_led_classdev_register_ext(&client->dev, &led->led_dev, 435 &init_data); 436 if (ret) { 437 dev_err(&client->dev, "led register err: %d\n", ret); 438 return ret; 439 } 440 441 return 0; 442 } 443 444 static void lp8860_remove(struct i2c_client *client) 445 { 446 struct lp8860_led *led = i2c_get_clientdata(client); 447 int ret; 448 449 gpiod_direction_output(led->enable_gpio, 0); 450 451 if (led->regulator) { 452 ret = regulator_disable(led->regulator); 453 if (ret) 454 dev_err(&led->client->dev, 455 "Failed to disable regulator\n"); 456 } 457 458 mutex_destroy(&led->lock); 459 } 460 461 static const struct i2c_device_id lp8860_id[] = { 462 { "lp8860", 0 }, 463 { } 464 }; 465 MODULE_DEVICE_TABLE(i2c, lp8860_id); 466 467 static const struct of_device_id of_lp8860_leds_match[] = { 468 { .compatible = "ti,lp8860", }, 469 {}, 470 }; 471 MODULE_DEVICE_TABLE(of, of_lp8860_leds_match); 472 473 static struct i2c_driver lp8860_driver = { 474 .driver = { 475 .name = "lp8860", 476 .of_match_table = of_lp8860_leds_match, 477 }, 478 .probe = lp8860_probe, 479 .remove = lp8860_remove, 480 .id_table = lp8860_id, 481 }; 482 module_i2c_driver(lp8860_driver); 483 484 MODULE_DESCRIPTION("Texas Instruments LP8860 LED driver"); 485 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>"); 486 MODULE_LICENSE("GPL v2"); 487