1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * TI LP8860 4-Channel LED Driver 4 * 5 * Copyright (C) 2014 Texas Instruments 6 * 7 * Author: Dan Murphy <dmurphy@ti.com> 8 */ 9 10 #include <linux/i2c.h> 11 #include <linux/init.h> 12 #include <linux/leds.h> 13 #include <linux/regmap.h> 14 #include <linux/regulator/consumer.h> 15 #include <linux/module.h> 16 #include <linux/mutex.h> 17 #include <linux/of.h> 18 #include <linux/of_gpio.h> 19 #include <linux/gpio/consumer.h> 20 #include <linux/slab.h> 21 22 #define LP8860_DISP_CL1_BRT_MSB 0x00 23 #define LP8860_DISP_CL1_BRT_LSB 0x01 24 #define LP8860_DISP_CL1_CURR_MSB 0x02 25 #define LP8860_DISP_CL1_CURR_LSB 0x03 26 #define LP8860_CL2_BRT_MSB 0x04 27 #define LP8860_CL2_BRT_LSB 0x05 28 #define LP8860_CL2_CURRENT 0x06 29 #define LP8860_CL3_BRT_MSB 0x07 30 #define LP8860_CL3_BRT_LSB 0x08 31 #define LP8860_CL3_CURRENT 0x09 32 #define LP8860_CL4_BRT_MSB 0x0a 33 #define LP8860_CL4_BRT_LSB 0x0b 34 #define LP8860_CL4_CURRENT 0x0c 35 #define LP8860_CONFIG 0x0d 36 #define LP8860_STATUS 0x0e 37 #define LP8860_FAULT 0x0f 38 #define LP8860_LED_FAULT 0x10 39 #define LP8860_FAULT_CLEAR 0x11 40 #define LP8860_ID 0x12 41 #define LP8860_TEMP_MSB 0x13 42 #define LP8860_TEMP_LSB 0x14 43 #define LP8860_DISP_LED_CURR_MSB 0x15 44 #define LP8860_DISP_LED_CURR_LSB 0x16 45 #define LP8860_DISP_LED_PWM_MSB 0x17 46 #define LP8860_DISP_LED_PWM_LSB 0x18 47 #define LP8860_EEPROM_CNTRL 0x19 48 #define LP8860_EEPROM_UNLOCK 0x1a 49 50 #define LP8860_EEPROM_REG_0 0x60 51 #define LP8860_EEPROM_REG_1 0x61 52 #define LP8860_EEPROM_REG_2 0x62 53 #define LP8860_EEPROM_REG_3 0x63 54 #define LP8860_EEPROM_REG_4 0x64 55 #define LP8860_EEPROM_REG_5 0x65 56 #define LP8860_EEPROM_REG_6 0x66 57 #define LP8860_EEPROM_REG_7 0x67 58 #define LP8860_EEPROM_REG_8 0x68 59 #define LP8860_EEPROM_REG_9 0x69 60 #define LP8860_EEPROM_REG_10 0x6a 61 #define LP8860_EEPROM_REG_11 0x6b 62 #define LP8860_EEPROM_REG_12 0x6c 63 #define LP8860_EEPROM_REG_13 0x6d 64 #define LP8860_EEPROM_REG_14 0x6e 65 #define LP8860_EEPROM_REG_15 0x6f 66 #define LP8860_EEPROM_REG_16 0x70 67 #define LP8860_EEPROM_REG_17 0x71 68 #define LP8860_EEPROM_REG_18 0x72 69 #define LP8860_EEPROM_REG_19 0x73 70 #define LP8860_EEPROM_REG_20 0x74 71 #define LP8860_EEPROM_REG_21 0x75 72 #define LP8860_EEPROM_REG_22 0x76 73 #define LP8860_EEPROM_REG_23 0x77 74 #define LP8860_EEPROM_REG_24 0x78 75 76 #define LP8860_LOCK_EEPROM 0x00 77 #define LP8860_UNLOCK_EEPROM 0x01 78 #define LP8860_PROGRAM_EEPROM 0x02 79 #define LP8860_EEPROM_CODE_1 0x08 80 #define LP8860_EEPROM_CODE_2 0xba 81 #define LP8860_EEPROM_CODE_3 0xef 82 83 #define LP8860_CLEAR_FAULTS 0x01 84 85 #define LP8860_NAME "lp8860" 86 87 /** 88 * struct lp8860_led - 89 * @lock - Lock for reading/writing the device 90 * @client - Pointer to the I2C client 91 * @led_dev - led class device pointer 92 * @regmap - Devices register map 93 * @eeprom_regmap - EEPROM register map 94 * @enable_gpio - VDDIO/EN gpio to enable communication interface 95 * @regulator - LED supply regulator pointer 96 */ 97 struct lp8860_led { 98 struct mutex lock; 99 struct i2c_client *client; 100 struct led_classdev led_dev; 101 struct regmap *regmap; 102 struct regmap *eeprom_regmap; 103 struct gpio_desc *enable_gpio; 104 struct regulator *regulator; 105 }; 106 107 struct lp8860_eeprom_reg { 108 uint8_t reg; 109 uint8_t value; 110 }; 111 112 static struct lp8860_eeprom_reg lp8860_eeprom_disp_regs[] = { 113 { LP8860_EEPROM_REG_0, 0xed }, 114 { LP8860_EEPROM_REG_1, 0xdf }, 115 { LP8860_EEPROM_REG_2, 0xdc }, 116 { LP8860_EEPROM_REG_3, 0xf0 }, 117 { LP8860_EEPROM_REG_4, 0xdf }, 118 { LP8860_EEPROM_REG_5, 0xe5 }, 119 { LP8860_EEPROM_REG_6, 0xf2 }, 120 { LP8860_EEPROM_REG_7, 0x77 }, 121 { LP8860_EEPROM_REG_8, 0x77 }, 122 { LP8860_EEPROM_REG_9, 0x71 }, 123 { LP8860_EEPROM_REG_10, 0x3f }, 124 { LP8860_EEPROM_REG_11, 0xb7 }, 125 { LP8860_EEPROM_REG_12, 0x17 }, 126 { LP8860_EEPROM_REG_13, 0xef }, 127 { LP8860_EEPROM_REG_14, 0xb0 }, 128 { LP8860_EEPROM_REG_15, 0x87 }, 129 { LP8860_EEPROM_REG_16, 0xce }, 130 { LP8860_EEPROM_REG_17, 0x72 }, 131 { LP8860_EEPROM_REG_18, 0xe5 }, 132 { LP8860_EEPROM_REG_19, 0xdf }, 133 { LP8860_EEPROM_REG_20, 0x35 }, 134 { LP8860_EEPROM_REG_21, 0x06 }, 135 { LP8860_EEPROM_REG_22, 0xdc }, 136 { LP8860_EEPROM_REG_23, 0x88 }, 137 { LP8860_EEPROM_REG_24, 0x3E }, 138 }; 139 140 static int lp8860_unlock_eeprom(struct lp8860_led *led, int lock) 141 { 142 int ret; 143 144 mutex_lock(&led->lock); 145 146 if (lock == LP8860_UNLOCK_EEPROM) { 147 ret = regmap_write(led->regmap, 148 LP8860_EEPROM_UNLOCK, 149 LP8860_EEPROM_CODE_1); 150 if (ret) { 151 dev_err(&led->client->dev, "EEPROM Unlock failed\n"); 152 goto out; 153 } 154 155 ret = regmap_write(led->regmap, 156 LP8860_EEPROM_UNLOCK, 157 LP8860_EEPROM_CODE_2); 158 if (ret) { 159 dev_err(&led->client->dev, "EEPROM Unlock failed\n"); 160 goto out; 161 } 162 ret = regmap_write(led->regmap, 163 LP8860_EEPROM_UNLOCK, 164 LP8860_EEPROM_CODE_3); 165 if (ret) { 166 dev_err(&led->client->dev, "EEPROM Unlock failed\n"); 167 goto out; 168 } 169 } else { 170 ret = regmap_write(led->regmap, 171 LP8860_EEPROM_UNLOCK, 172 LP8860_LOCK_EEPROM); 173 } 174 175 out: 176 mutex_unlock(&led->lock); 177 return ret; 178 } 179 180 static int lp8860_fault_check(struct lp8860_led *led) 181 { 182 int ret, fault; 183 unsigned int read_buf; 184 185 ret = regmap_read(led->regmap, LP8860_LED_FAULT, &read_buf); 186 if (ret) 187 goto out; 188 189 fault = read_buf; 190 191 ret = regmap_read(led->regmap, LP8860_FAULT, &read_buf); 192 if (ret) 193 goto out; 194 195 fault |= read_buf; 196 197 /* Attempt to clear any faults */ 198 if (fault) 199 ret = regmap_write(led->regmap, LP8860_FAULT_CLEAR, 200 LP8860_CLEAR_FAULTS); 201 out: 202 return ret; 203 } 204 205 static int lp8860_brightness_set(struct led_classdev *led_cdev, 206 enum led_brightness brt_val) 207 { 208 struct lp8860_led *led = 209 container_of(led_cdev, struct lp8860_led, led_dev); 210 int disp_brightness = brt_val * 255; 211 int ret; 212 213 mutex_lock(&led->lock); 214 215 ret = lp8860_fault_check(led); 216 if (ret) { 217 dev_err(&led->client->dev, "Cannot read/clear faults\n"); 218 goto out; 219 } 220 221 ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_MSB, 222 (disp_brightness & 0xff00) >> 8); 223 if (ret) { 224 dev_err(&led->client->dev, "Cannot write CL1 MSB\n"); 225 goto out; 226 } 227 228 ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_LSB, 229 disp_brightness & 0xff); 230 if (ret) { 231 dev_err(&led->client->dev, "Cannot write CL1 LSB\n"); 232 goto out; 233 } 234 out: 235 mutex_unlock(&led->lock); 236 return ret; 237 } 238 239 static int lp8860_init(struct lp8860_led *led) 240 { 241 unsigned int read_buf; 242 int ret, i, reg_count; 243 244 if (led->regulator) { 245 ret = regulator_enable(led->regulator); 246 if (ret) { 247 dev_err(&led->client->dev, 248 "Failed to enable regulator\n"); 249 return ret; 250 } 251 } 252 253 if (led->enable_gpio) 254 gpiod_direction_output(led->enable_gpio, 1); 255 256 ret = lp8860_fault_check(led); 257 if (ret) 258 goto out; 259 260 ret = regmap_read(led->regmap, LP8860_STATUS, &read_buf); 261 if (ret) 262 goto out; 263 264 ret = lp8860_unlock_eeprom(led, LP8860_UNLOCK_EEPROM); 265 if (ret) { 266 dev_err(&led->client->dev, "Failed unlocking EEPROM\n"); 267 goto out; 268 } 269 270 reg_count = ARRAY_SIZE(lp8860_eeprom_disp_regs) / sizeof(lp8860_eeprom_disp_regs[0]); 271 for (i = 0; i < reg_count; i++) { 272 ret = regmap_write(led->eeprom_regmap, 273 lp8860_eeprom_disp_regs[i].reg, 274 lp8860_eeprom_disp_regs[i].value); 275 if (ret) { 276 dev_err(&led->client->dev, "Failed writing EEPROM\n"); 277 goto out; 278 } 279 } 280 281 ret = lp8860_unlock_eeprom(led, LP8860_LOCK_EEPROM); 282 if (ret) 283 goto out; 284 285 ret = regmap_write(led->regmap, 286 LP8860_EEPROM_CNTRL, 287 LP8860_PROGRAM_EEPROM); 288 if (ret) { 289 dev_err(&led->client->dev, "Failed programming EEPROM\n"); 290 goto out; 291 } 292 293 return ret; 294 295 out: 296 if (ret) 297 if (led->enable_gpio) 298 gpiod_direction_output(led->enable_gpio, 0); 299 300 if (led->regulator) { 301 ret = regulator_disable(led->regulator); 302 if (ret) 303 dev_err(&led->client->dev, 304 "Failed to disable regulator\n"); 305 } 306 307 return ret; 308 } 309 310 static const struct reg_default lp8860_reg_defs[] = { 311 { LP8860_DISP_CL1_BRT_MSB, 0x00}, 312 { LP8860_DISP_CL1_BRT_LSB, 0x00}, 313 { LP8860_DISP_CL1_CURR_MSB, 0x00}, 314 { LP8860_DISP_CL1_CURR_LSB, 0x00}, 315 { LP8860_CL2_BRT_MSB, 0x00}, 316 { LP8860_CL2_BRT_LSB, 0x00}, 317 { LP8860_CL2_CURRENT, 0x00}, 318 { LP8860_CL3_BRT_MSB, 0x00}, 319 { LP8860_CL3_BRT_LSB, 0x00}, 320 { LP8860_CL3_CURRENT, 0x00}, 321 { LP8860_CL4_BRT_MSB, 0x00}, 322 { LP8860_CL4_BRT_LSB, 0x00}, 323 { LP8860_CL4_CURRENT, 0x00}, 324 { LP8860_CONFIG, 0x00}, 325 { LP8860_FAULT_CLEAR, 0x00}, 326 { LP8860_EEPROM_CNTRL, 0x80}, 327 { LP8860_EEPROM_UNLOCK, 0x00}, 328 }; 329 330 static const struct regmap_config lp8860_regmap_config = { 331 .reg_bits = 8, 332 .val_bits = 8, 333 334 .max_register = LP8860_EEPROM_UNLOCK, 335 .reg_defaults = lp8860_reg_defs, 336 .num_reg_defaults = ARRAY_SIZE(lp8860_reg_defs), 337 .cache_type = REGCACHE_NONE, 338 }; 339 340 static const struct reg_default lp8860_eeprom_defs[] = { 341 { LP8860_EEPROM_REG_0, 0x00 }, 342 { LP8860_EEPROM_REG_1, 0x00 }, 343 { LP8860_EEPROM_REG_2, 0x00 }, 344 { LP8860_EEPROM_REG_3, 0x00 }, 345 { LP8860_EEPROM_REG_4, 0x00 }, 346 { LP8860_EEPROM_REG_5, 0x00 }, 347 { LP8860_EEPROM_REG_6, 0x00 }, 348 { LP8860_EEPROM_REG_7, 0x00 }, 349 { LP8860_EEPROM_REG_8, 0x00 }, 350 { LP8860_EEPROM_REG_9, 0x00 }, 351 { LP8860_EEPROM_REG_10, 0x00 }, 352 { LP8860_EEPROM_REG_11, 0x00 }, 353 { LP8860_EEPROM_REG_12, 0x00 }, 354 { LP8860_EEPROM_REG_13, 0x00 }, 355 { LP8860_EEPROM_REG_14, 0x00 }, 356 { LP8860_EEPROM_REG_15, 0x00 }, 357 { LP8860_EEPROM_REG_16, 0x00 }, 358 { LP8860_EEPROM_REG_17, 0x00 }, 359 { LP8860_EEPROM_REG_18, 0x00 }, 360 { LP8860_EEPROM_REG_19, 0x00 }, 361 { LP8860_EEPROM_REG_20, 0x00 }, 362 { LP8860_EEPROM_REG_21, 0x00 }, 363 { LP8860_EEPROM_REG_22, 0x00 }, 364 { LP8860_EEPROM_REG_23, 0x00 }, 365 { LP8860_EEPROM_REG_24, 0x00 }, 366 }; 367 368 static const struct regmap_config lp8860_eeprom_regmap_config = { 369 .reg_bits = 8, 370 .val_bits = 8, 371 372 .max_register = LP8860_EEPROM_REG_24, 373 .reg_defaults = lp8860_eeprom_defs, 374 .num_reg_defaults = ARRAY_SIZE(lp8860_eeprom_defs), 375 .cache_type = REGCACHE_NONE, 376 }; 377 378 static int lp8860_probe(struct i2c_client *client, 379 const struct i2c_device_id *id) 380 { 381 int ret; 382 struct lp8860_led *led; 383 struct device_node *np = client->dev.of_node; 384 struct device_node *child_node; 385 struct led_init_data init_data = {}; 386 387 led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL); 388 if (!led) 389 return -ENOMEM; 390 391 child_node = of_get_next_available_child(np, NULL); 392 if (!child_node) 393 return -EINVAL; 394 395 led->led_dev.default_trigger = of_get_property(child_node, 396 "linux,default-trigger", 397 NULL); 398 399 led->enable_gpio = devm_gpiod_get_optional(&client->dev, 400 "enable", GPIOD_OUT_LOW); 401 if (IS_ERR(led->enable_gpio)) { 402 ret = PTR_ERR(led->enable_gpio); 403 dev_err(&client->dev, "Failed to get enable gpio: %d\n", ret); 404 return ret; 405 } 406 407 led->regulator = devm_regulator_get(&client->dev, "vled"); 408 if (IS_ERR(led->regulator)) 409 led->regulator = NULL; 410 411 led->client = client; 412 led->led_dev.brightness_set_blocking = lp8860_brightness_set; 413 414 mutex_init(&led->lock); 415 416 i2c_set_clientdata(client, led); 417 418 led->regmap = devm_regmap_init_i2c(client, &lp8860_regmap_config); 419 if (IS_ERR(led->regmap)) { 420 ret = PTR_ERR(led->regmap); 421 dev_err(&client->dev, "Failed to allocate register map: %d\n", 422 ret); 423 return ret; 424 } 425 426 led->eeprom_regmap = devm_regmap_init_i2c(client, &lp8860_eeprom_regmap_config); 427 if (IS_ERR(led->eeprom_regmap)) { 428 ret = PTR_ERR(led->eeprom_regmap); 429 dev_err(&client->dev, "Failed to allocate register map: %d\n", 430 ret); 431 return ret; 432 } 433 434 ret = lp8860_init(led); 435 if (ret) 436 return ret; 437 438 init_data.fwnode = of_fwnode_handle(child_node); 439 init_data.devicename = LP8860_NAME; 440 init_data.default_label = ":display_cluster"; 441 442 ret = devm_led_classdev_register_ext(&client->dev, &led->led_dev, 443 &init_data); 444 if (ret) { 445 dev_err(&client->dev, "led register err: %d\n", ret); 446 return ret; 447 } 448 449 return 0; 450 } 451 452 static int lp8860_remove(struct i2c_client *client) 453 { 454 struct lp8860_led *led = i2c_get_clientdata(client); 455 int ret; 456 457 if (led->enable_gpio) 458 gpiod_direction_output(led->enable_gpio, 0); 459 460 if (led->regulator) { 461 ret = regulator_disable(led->regulator); 462 if (ret) 463 dev_err(&led->client->dev, 464 "Failed to disable regulator\n"); 465 } 466 467 mutex_destroy(&led->lock); 468 469 return 0; 470 } 471 472 static const struct i2c_device_id lp8860_id[] = { 473 { "lp8860", 0 }, 474 { } 475 }; 476 MODULE_DEVICE_TABLE(i2c, lp8860_id); 477 478 static const struct of_device_id of_lp8860_leds_match[] = { 479 { .compatible = "ti,lp8860", }, 480 {}, 481 }; 482 MODULE_DEVICE_TABLE(of, of_lp8860_leds_match); 483 484 static struct i2c_driver lp8860_driver = { 485 .driver = { 486 .name = "lp8860", 487 .of_match_table = of_lp8860_leds_match, 488 }, 489 .probe = lp8860_probe, 490 .remove = lp8860_remove, 491 .id_table = lp8860_id, 492 }; 493 module_i2c_driver(lp8860_driver); 494 495 MODULE_DESCRIPTION("Texas Instruments LP8860 LED driver"); 496 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>"); 497 MODULE_LICENSE("GPL v2"); 498