xref: /openbmc/linux/drivers/leds/leds-lp50xx.c (revision f7af616c)
1 // SPDX-License-Identifier: GPL-2.0
2 // TI LP50XX LED chip family driver
3 // Copyright (C) 2018-20 Texas Instruments Incorporated - https://www.ti.com/
4 
5 #include <linux/gpio/consumer.h>
6 #include <linux/i2c.h>
7 #include <linux/init.h>
8 #include <linux/leds.h>
9 #include <linux/mod_devicetable.h>
10 #include <linux/module.h>
11 #include <linux/mutex.h>
12 #include <linux/regmap.h>
13 #include <linux/regulator/consumer.h>
14 #include <linux/slab.h>
15 #include <uapi/linux/uleds.h>
16 
17 #include <linux/led-class-multicolor.h>
18 
19 #include "leds.h"
20 
21 #define LP50XX_DEV_CFG0		0x00
22 #define LP50XX_DEV_CFG1		0x01
23 #define LP50XX_LED_CFG0		0x02
24 
25 /* LP5009 and LP5012 registers */
26 #define LP5012_BNK_BRT		0x03
27 #define LP5012_BNKA_CLR		0x04
28 #define LP5012_BNKB_CLR		0x05
29 #define LP5012_BNKC_CLR		0x06
30 #define LP5012_LED0_BRT		0x07
31 #define LP5012_OUT0_CLR		0x0b
32 #define LP5012_RESET		0x17
33 
34 /* LP5018 and LP5024 registers */
35 #define LP5024_BNK_BRT		0x03
36 #define LP5024_BNKA_CLR		0x04
37 #define LP5024_BNKB_CLR		0x05
38 #define LP5024_BNKC_CLR		0x06
39 #define LP5024_LED0_BRT		0x07
40 #define LP5024_OUT0_CLR		0x0f
41 #define LP5024_RESET		0x27
42 
43 /* LP5030 and LP5036 registers */
44 #define LP5036_LED_CFG1		0x03
45 #define LP5036_BNK_BRT		0x04
46 #define LP5036_BNKA_CLR		0x05
47 #define LP5036_BNKB_CLR		0x06
48 #define LP5036_BNKC_CLR		0x07
49 #define LP5036_LED0_BRT		0x08
50 #define LP5036_OUT0_CLR		0x14
51 #define LP5036_RESET		0x38
52 
53 #define LP50XX_SW_RESET		0xff
54 #define LP50XX_CHIP_EN		BIT(6)
55 
56 /* There are 3 LED outputs per bank */
57 #define LP50XX_LEDS_PER_MODULE	3
58 
59 #define LP5009_MAX_LED_MODULES	2
60 #define LP5012_MAX_LED_MODULES	4
61 #define LP5018_MAX_LED_MODULES	6
62 #define LP5024_MAX_LED_MODULES	8
63 #define LP5030_MAX_LED_MODULES	10
64 #define LP5036_MAX_LED_MODULES	12
65 
66 static const struct reg_default lp5012_reg_defs[] = {
67 	{LP50XX_DEV_CFG0, 0x0},
68 	{LP50XX_DEV_CFG1, 0x3c},
69 	{LP50XX_LED_CFG0, 0x0},
70 	{LP5012_BNK_BRT, 0xff},
71 	{LP5012_BNKA_CLR, 0x0f},
72 	{LP5012_BNKB_CLR, 0x0f},
73 	{LP5012_BNKC_CLR, 0x0f},
74 	{LP5012_LED0_BRT, 0x0f},
75 	/* LEDX_BRT registers are all 0xff for defaults */
76 	{0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff},
77 	{LP5012_OUT0_CLR, 0x0f},
78 	/* OUTX_CLR registers are all 0x0 for defaults */
79 	{0x0c, 0x00}, {0x0d, 0x00}, {0x0e, 0x00}, {0x0f, 0x00}, {0x10, 0x00},
80 	{0x11, 0x00}, {0x12, 0x00}, {0x13, 0x00}, {0x14, 0x00},	{0x15, 0x00},
81 	{0x16, 0x00},
82 	{LP5012_RESET, 0x00}
83 };
84 
85 static const struct reg_default lp5024_reg_defs[] = {
86 	{LP50XX_DEV_CFG0, 0x0},
87 	{LP50XX_DEV_CFG1, 0x3c},
88 	{LP50XX_LED_CFG0, 0x0},
89 	{LP5024_BNK_BRT, 0xff},
90 	{LP5024_BNKA_CLR, 0x0f},
91 	{LP5024_BNKB_CLR, 0x0f},
92 	{LP5024_BNKC_CLR, 0x0f},
93 	{LP5024_LED0_BRT, 0x0f},
94 	/* LEDX_BRT registers are all 0xff for defaults */
95 	{0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff}, {0x0b, 0xff}, {0x0c, 0xff},
96 	{0x0d, 0xff}, {0x0e, 0xff},
97 	{LP5024_OUT0_CLR, 0x0f},
98 	/* OUTX_CLR registers are all 0x0 for defaults */
99 	{0x10, 0x00}, {0x11, 0x00}, {0x12, 0x00}, {0x13, 0x00}, {0x14, 0x00},
100 	{0x15, 0x00}, {0x16, 0x00}, {0x17, 0x00}, {0x18, 0x00}, {0x19, 0x00},
101 	{0x1a, 0x00}, {0x1b, 0x00}, {0x1c, 0x00}, {0x1d, 0x00}, {0x1e, 0x00},
102 	{0x1f, 0x00}, {0x20, 0x00}, {0x21, 0x00}, {0x22, 0x00}, {0x23, 0x00},
103 	{0x24, 0x00}, {0x25, 0x00}, {0x26, 0x00},
104 	{LP5024_RESET, 0x00}
105 };
106 
107 static const struct reg_default lp5036_reg_defs[] = {
108 	{LP50XX_DEV_CFG0, 0x0},
109 	{LP50XX_DEV_CFG1, 0x3c},
110 	{LP50XX_LED_CFG0, 0x0},
111 	{LP5036_LED_CFG1, 0x0},
112 	{LP5036_BNK_BRT, 0xff},
113 	{LP5036_BNKA_CLR, 0x0f},
114 	{LP5036_BNKB_CLR, 0x0f},
115 	{LP5036_BNKC_CLR, 0x0f},
116 	{LP5036_LED0_BRT, 0x0f},
117 	/* LEDX_BRT registers are all 0xff for defaults */
118 	{0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff}, {0x0b, 0xff}, {0x0c, 0xff},
119 	{0x0d, 0xff}, {0x0e, 0xff}, {0x0f, 0xff}, {0x10, 0xff}, {0x11, 0xff},
120 	{0x12, 0xff}, {0x13, 0xff},
121 	{LP5036_OUT0_CLR, 0x0f},
122 	/* OUTX_CLR registers are all 0x0 for defaults */
123 	{0x15, 0x00}, {0x16, 0x00}, {0x17, 0x00}, {0x18, 0x00}, {0x19, 0x00},
124 	{0x1a, 0x00}, {0x1b, 0x00}, {0x1c, 0x00}, {0x1d, 0x00}, {0x1e, 0x00},
125 	{0x1f, 0x00}, {0x20, 0x00}, {0x21, 0x00}, {0x22, 0x00}, {0x23, 0x00},
126 	{0x24, 0x00}, {0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00},
127 	{0x29, 0x00}, {0x2a, 0x00}, {0x2b, 0x00}, {0x2c, 0x00}, {0x2d, 0x00},
128 	{0x2e, 0x00}, {0x2f, 0x00}, {0x30, 0x00}, {0x31, 0x00}, {0x32, 0x00},
129 	{0x33, 0x00}, {0x34, 0x00}, {0x35, 0x00}, {0x36, 0x00}, {0x37, 0x00},
130 	{LP5036_RESET, 0x00}
131 };
132 
133 static const struct regmap_config lp5012_regmap_config = {
134 	.reg_bits = 8,
135 	.val_bits = 8,
136 
137 	.max_register = LP5012_RESET,
138 	.reg_defaults = lp5012_reg_defs,
139 	.num_reg_defaults = ARRAY_SIZE(lp5012_reg_defs),
140 	.cache_type = REGCACHE_FLAT,
141 };
142 
143 static const struct regmap_config lp5024_regmap_config = {
144 	.reg_bits = 8,
145 	.val_bits = 8,
146 
147 	.max_register = LP5024_RESET,
148 	.reg_defaults = lp5024_reg_defs,
149 	.num_reg_defaults = ARRAY_SIZE(lp5024_reg_defs),
150 	.cache_type = REGCACHE_FLAT,
151 };
152 
153 static const struct regmap_config lp5036_regmap_config = {
154 	.reg_bits = 8,
155 	.val_bits = 8,
156 
157 	.max_register = LP5036_RESET,
158 	.reg_defaults = lp5036_reg_defs,
159 	.num_reg_defaults = ARRAY_SIZE(lp5036_reg_defs),
160 	.cache_type = REGCACHE_FLAT,
161 };
162 
163 enum lp50xx_model {
164 	LP5009,
165 	LP5012,
166 	LP5018,
167 	LP5024,
168 	LP5030,
169 	LP5036,
170 };
171 
172 /**
173  * struct lp50xx_chip_info -
174  * @lp50xx_regmap_config: regmap register configuration
175  * @model_id: LED device model
176  * @max_modules: total number of supported LED modules
177  * @num_leds: number of LED outputs available on the device
178  * @led_brightness0_reg: first brightness register of the device
179  * @mix_out0_reg: first color mix register of the device
180  * @bank_brt_reg: bank brightness register
181  * @bank_mix_reg: color mix register
182  * @reset_reg: device reset register
183  */
184 struct lp50xx_chip_info {
185 	const struct regmap_config *lp50xx_regmap_config;
186 	int model_id;
187 	u8 max_modules;
188 	u8 num_leds;
189 	u8 led_brightness0_reg;
190 	u8 mix_out0_reg;
191 	u8 bank_brt_reg;
192 	u8 bank_mix_reg;
193 	u8 reset_reg;
194 };
195 
196 static const struct lp50xx_chip_info lp50xx_chip_info_tbl[] = {
197 	[LP5009] = {
198 		.model_id = LP5009,
199 		.max_modules = LP5009_MAX_LED_MODULES,
200 		.num_leds = LP5009_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
201 		.led_brightness0_reg = LP5012_LED0_BRT,
202 		.mix_out0_reg = LP5012_OUT0_CLR,
203 		.bank_brt_reg = LP5012_BNK_BRT,
204 		.bank_mix_reg = LP5012_BNKA_CLR,
205 		.reset_reg = LP5012_RESET,
206 		.lp50xx_regmap_config = &lp5012_regmap_config,
207 	},
208 	[LP5012] = {
209 		.model_id = LP5012,
210 		.max_modules = LP5012_MAX_LED_MODULES,
211 		.num_leds = LP5012_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
212 		.led_brightness0_reg = LP5012_LED0_BRT,
213 		.mix_out0_reg = LP5012_OUT0_CLR,
214 		.bank_brt_reg = LP5012_BNK_BRT,
215 		.bank_mix_reg = LP5012_BNKA_CLR,
216 		.reset_reg = LP5012_RESET,
217 		.lp50xx_regmap_config = &lp5012_regmap_config,
218 	},
219 	[LP5018] = {
220 		.model_id = LP5018,
221 		.max_modules = LP5018_MAX_LED_MODULES,
222 		.num_leds = LP5018_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
223 		.led_brightness0_reg = LP5024_LED0_BRT,
224 		.mix_out0_reg = LP5024_OUT0_CLR,
225 		.bank_brt_reg = LP5024_BNK_BRT,
226 		.bank_mix_reg = LP5024_BNKA_CLR,
227 		.reset_reg = LP5024_RESET,
228 		.lp50xx_regmap_config = &lp5024_regmap_config,
229 	},
230 	[LP5024] = {
231 		.model_id = LP5024,
232 		.max_modules = LP5024_MAX_LED_MODULES,
233 		.num_leds = LP5024_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
234 		.led_brightness0_reg = LP5024_LED0_BRT,
235 		.mix_out0_reg = LP5024_OUT0_CLR,
236 		.bank_brt_reg = LP5024_BNK_BRT,
237 		.bank_mix_reg = LP5024_BNKA_CLR,
238 		.reset_reg = LP5024_RESET,
239 		.lp50xx_regmap_config = &lp5024_regmap_config,
240 	},
241 	[LP5030] = {
242 		.model_id = LP5030,
243 		.max_modules = LP5030_MAX_LED_MODULES,
244 		.num_leds = LP5030_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
245 		.led_brightness0_reg = LP5036_LED0_BRT,
246 		.mix_out0_reg = LP5036_OUT0_CLR,
247 		.bank_brt_reg = LP5036_BNK_BRT,
248 		.bank_mix_reg = LP5036_BNKA_CLR,
249 		.reset_reg = LP5036_RESET,
250 		.lp50xx_regmap_config = &lp5036_regmap_config,
251 	},
252 	[LP5036] = {
253 		.model_id = LP5036,
254 		.max_modules = LP5036_MAX_LED_MODULES,
255 		.num_leds = LP5036_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
256 		.led_brightness0_reg = LP5036_LED0_BRT,
257 		.mix_out0_reg = LP5036_OUT0_CLR,
258 		.bank_brt_reg = LP5036_BNK_BRT,
259 		.bank_mix_reg = LP5036_BNKA_CLR,
260 		.reset_reg = LP5036_RESET,
261 		.lp50xx_regmap_config = &lp5036_regmap_config,
262 	},
263 };
264 
265 struct lp50xx_led {
266 	struct led_classdev_mc mc_cdev;
267 	struct lp50xx *priv;
268 	unsigned long bank_modules;
269 	int led_intensity[LP50XX_LEDS_PER_MODULE];
270 	u8 ctrl_bank_enabled;
271 	int led_number;
272 };
273 
274 /**
275  * struct lp50xx -
276  * @enable_gpio: hardware enable gpio
277  * @regulator: LED supply regulator pointer
278  * @client: pointer to the I2C client
279  * @regmap: device register map
280  * @dev: pointer to the devices device struct
281  * @lock: lock for reading/writing the device
282  * @chip_info: chip specific information (ie num_leds)
283  * @num_of_banked_leds: holds the number of banked LEDs
284  * @leds: array of LED strings
285  */
286 struct lp50xx {
287 	struct gpio_desc *enable_gpio;
288 	struct regulator *regulator;
289 	struct i2c_client *client;
290 	struct regmap *regmap;
291 	struct device *dev;
292 	struct mutex lock;
293 	const struct lp50xx_chip_info *chip_info;
294 	int num_of_banked_leds;
295 
296 	/* This needs to be at the end of the struct */
297 	struct lp50xx_led leds[];
298 };
299 
300 static struct lp50xx_led *mcled_cdev_to_led(struct led_classdev_mc *mc_cdev)
301 {
302 	return container_of(mc_cdev, struct lp50xx_led, mc_cdev);
303 }
304 
305 static int lp50xx_brightness_set(struct led_classdev *cdev,
306 			     enum led_brightness brightness)
307 {
308 	struct led_classdev_mc *mc_dev = lcdev_to_mccdev(cdev);
309 	struct lp50xx_led *led = mcled_cdev_to_led(mc_dev);
310 	const struct lp50xx_chip_info *led_chip = led->priv->chip_info;
311 	u8 led_offset, reg_val;
312 	int ret = 0;
313 	int i;
314 
315 	mutex_lock(&led->priv->lock);
316 	if (led->ctrl_bank_enabled)
317 		reg_val = led_chip->bank_brt_reg;
318 	else
319 		reg_val = led_chip->led_brightness0_reg +
320 			  led->led_number;
321 
322 	ret = regmap_write(led->priv->regmap, reg_val, brightness);
323 	if (ret) {
324 		dev_err(led->priv->dev,
325 			"Cannot write brightness value %d\n", ret);
326 		goto out;
327 	}
328 
329 	for (i = 0; i < led->mc_cdev.num_colors; i++) {
330 		if (led->ctrl_bank_enabled) {
331 			reg_val = led_chip->bank_mix_reg + i;
332 		} else {
333 			led_offset = (led->led_number * 3) + i;
334 			reg_val = led_chip->mix_out0_reg + led_offset;
335 		}
336 
337 		ret = regmap_write(led->priv->regmap, reg_val,
338 				   mc_dev->subled_info[i].intensity);
339 		if (ret) {
340 			dev_err(led->priv->dev,
341 				"Cannot write intensity value %d\n", ret);
342 			goto out;
343 		}
344 	}
345 out:
346 	mutex_unlock(&led->priv->lock);
347 	return ret;
348 }
349 
350 static int lp50xx_set_banks(struct lp50xx *priv, u32 led_banks[])
351 {
352 	u8 led_config_lo, led_config_hi;
353 	u32 bank_enable_mask = 0;
354 	int ret;
355 	int i;
356 
357 	for (i = 0; i < priv->chip_info->max_modules; i++) {
358 		if (led_banks[i])
359 			bank_enable_mask |= (1 << led_banks[i]);
360 	}
361 
362 	led_config_lo = bank_enable_mask;
363 	led_config_hi = bank_enable_mask >> 8;
364 
365 	ret = regmap_write(priv->regmap, LP50XX_LED_CFG0, led_config_lo);
366 	if (ret)
367 		return ret;
368 
369 	if (priv->chip_info->model_id >= LP5030)
370 		ret = regmap_write(priv->regmap, LP5036_LED_CFG1, led_config_hi);
371 
372 	return ret;
373 }
374 
375 static int lp50xx_reset(struct lp50xx *priv)
376 {
377 	return regmap_write(priv->regmap, priv->chip_info->reset_reg, LP50XX_SW_RESET);
378 }
379 
380 static int lp50xx_enable_disable(struct lp50xx *priv, int enable_disable)
381 {
382 	int ret;
383 
384 	ret = gpiod_direction_output(priv->enable_gpio, enable_disable);
385 	if (ret)
386 		return ret;
387 
388 	if (enable_disable)
389 		return regmap_write(priv->regmap, LP50XX_DEV_CFG0, LP50XX_CHIP_EN);
390 	else
391 		return regmap_write(priv->regmap, LP50XX_DEV_CFG0, 0);
392 
393 }
394 
395 static int lp50xx_probe_leds(struct fwnode_handle *child, struct lp50xx *priv,
396 			     struct lp50xx_led *led, int num_leds)
397 {
398 	u32 led_banks[LP5036_MAX_LED_MODULES] = {0};
399 	int led_number;
400 	int ret;
401 
402 	if (num_leds > 1) {
403 		if (num_leds > priv->chip_info->max_modules) {
404 			dev_err(priv->dev, "reg property is invalid\n");
405 			return -EINVAL;
406 		}
407 
408 		priv->num_of_banked_leds = num_leds;
409 
410 		ret = fwnode_property_read_u32_array(child, "reg", led_banks, num_leds);
411 		if (ret) {
412 			dev_err(priv->dev, "reg property is missing\n");
413 			return ret;
414 		}
415 
416 		ret = lp50xx_set_banks(priv, led_banks);
417 		if (ret) {
418 			dev_err(priv->dev, "Cannot setup banked LEDs\n");
419 			return ret;
420 		}
421 
422 		led->ctrl_bank_enabled = 1;
423 	} else {
424 		ret = fwnode_property_read_u32(child, "reg", &led_number);
425 		if (ret) {
426 			dev_err(priv->dev, "led reg property missing\n");
427 			return ret;
428 		}
429 
430 		if (led_number > priv->chip_info->num_leds) {
431 			dev_err(priv->dev, "led-sources property is invalid\n");
432 			return -EINVAL;
433 		}
434 
435 		led->led_number = led_number;
436 	}
437 
438 	return 0;
439 }
440 
441 static int lp50xx_probe_dt(struct lp50xx *priv)
442 {
443 	struct fwnode_handle *child = NULL;
444 	struct fwnode_handle *led_node = NULL;
445 	struct led_init_data init_data = {};
446 	struct led_classdev *led_cdev;
447 	struct mc_subled *mc_led_info;
448 	struct lp50xx_led *led;
449 	int ret = -EINVAL;
450 	int num_colors;
451 	u32 color_id;
452 	int i = 0;
453 
454 	priv->enable_gpio = devm_gpiod_get_optional(priv->dev, "enable", GPIOD_OUT_LOW);
455 	if (IS_ERR(priv->enable_gpio))
456 		return dev_err_probe(priv->dev, PTR_ERR(priv->enable_gpio),
457 				     "Failed to get enable GPIO\n");
458 
459 	priv->regulator = devm_regulator_get(priv->dev, "vled");
460 	if (IS_ERR(priv->regulator))
461 		priv->regulator = NULL;
462 
463 	device_for_each_child_node(priv->dev, child) {
464 		led = &priv->leds[i];
465 		ret = fwnode_property_count_u32(child, "reg");
466 		if (ret < 0) {
467 			dev_err(priv->dev, "reg property is invalid\n");
468 			goto child_out;
469 		}
470 
471 		ret = lp50xx_probe_leds(child, priv, led, ret);
472 		if (ret)
473 			goto child_out;
474 
475 		init_data.fwnode = child;
476 		num_colors = 0;
477 
478 		/*
479 		 * There are only 3 LEDs per module otherwise they should be
480 		 * banked which also is presented as 3 LEDs.
481 		 */
482 		mc_led_info = devm_kcalloc(priv->dev, LP50XX_LEDS_PER_MODULE,
483 					   sizeof(*mc_led_info), GFP_KERNEL);
484 		if (!mc_led_info) {
485 			ret = -ENOMEM;
486 			goto child_out;
487 		}
488 
489 		fwnode_for_each_child_node(child, led_node) {
490 			ret = fwnode_property_read_u32(led_node, "color",
491 						       &color_id);
492 			if (ret) {
493 				dev_err(priv->dev, "Cannot read color\n");
494 				goto child_out;
495 			}
496 
497 			mc_led_info[num_colors].color_index = color_id;
498 			num_colors++;
499 		}
500 
501 		led->priv = priv;
502 		led->mc_cdev.num_colors = num_colors;
503 		led->mc_cdev.subled_info = mc_led_info;
504 		led_cdev = &led->mc_cdev.led_cdev;
505 		led_cdev->brightness_set_blocking = lp50xx_brightness_set;
506 
507 		ret = devm_led_classdev_multicolor_register_ext(priv->dev,
508 						       &led->mc_cdev,
509 						       &init_data);
510 		if (ret) {
511 			dev_err(priv->dev, "led register err: %d\n", ret);
512 			goto child_out;
513 		}
514 		i++;
515 		fwnode_handle_put(child);
516 	}
517 
518 	return 0;
519 
520 child_out:
521 	fwnode_handle_put(child);
522 	return ret;
523 }
524 
525 static int lp50xx_probe(struct i2c_client *client)
526 {
527 	struct lp50xx *led;
528 	int count;
529 	int ret;
530 
531 	count = device_get_child_node_count(&client->dev);
532 	if (!count) {
533 		dev_err(&client->dev, "LEDs are not defined in device tree!");
534 		return -ENODEV;
535 	}
536 
537 	led = devm_kzalloc(&client->dev, struct_size(led, leds, count),
538 			   GFP_KERNEL);
539 	if (!led)
540 		return -ENOMEM;
541 
542 	mutex_init(&led->lock);
543 	led->client = client;
544 	led->dev = &client->dev;
545 	led->chip_info = device_get_match_data(&client->dev);
546 	i2c_set_clientdata(client, led);
547 	led->regmap = devm_regmap_init_i2c(client,
548 					led->chip_info->lp50xx_regmap_config);
549 	if (IS_ERR(led->regmap)) {
550 		ret = PTR_ERR(led->regmap);
551 		dev_err(&client->dev, "Failed to allocate register map: %d\n",
552 			ret);
553 		return ret;
554 	}
555 
556 	ret = lp50xx_reset(led);
557 	if (ret)
558 		return ret;
559 
560 	ret = lp50xx_enable_disable(led, 1);
561 	if (ret)
562 		return ret;
563 
564 	return lp50xx_probe_dt(led);
565 }
566 
567 static int lp50xx_remove(struct i2c_client *client)
568 {
569 	struct lp50xx *led = i2c_get_clientdata(client);
570 	int ret;
571 
572 	ret = lp50xx_enable_disable(led, 0);
573 	if (ret) {
574 		dev_err(led->dev, "Failed to disable chip\n");
575 		return ret;
576 	}
577 
578 	if (led->regulator) {
579 		ret = regulator_disable(led->regulator);
580 		if (ret)
581 			dev_err(led->dev, "Failed to disable regulator\n");
582 	}
583 
584 	mutex_destroy(&led->lock);
585 
586 	return 0;
587 }
588 
589 static const struct i2c_device_id lp50xx_id[] = {
590 	{ "lp5009", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5009] },
591 	{ "lp5012", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5012] },
592 	{ "lp5018", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5018] },
593 	{ "lp5024", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5024] },
594 	{ "lp5030", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5030] },
595 	{ "lp5036", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5036] },
596 	{ }
597 };
598 MODULE_DEVICE_TABLE(i2c, lp50xx_id);
599 
600 static const struct of_device_id of_lp50xx_leds_match[] = {
601 	{ .compatible = "ti,lp5009", .data = &lp50xx_chip_info_tbl[LP5009] },
602 	{ .compatible = "ti,lp5012", .data = &lp50xx_chip_info_tbl[LP5012] },
603 	{ .compatible = "ti,lp5018", .data = &lp50xx_chip_info_tbl[LP5018] },
604 	{ .compatible = "ti,lp5024", .data = &lp50xx_chip_info_tbl[LP5024] },
605 	{ .compatible = "ti,lp5030", .data = &lp50xx_chip_info_tbl[LP5030] },
606 	{ .compatible = "ti,lp5036", .data = &lp50xx_chip_info_tbl[LP5036] },
607 	{}
608 };
609 MODULE_DEVICE_TABLE(of, of_lp50xx_leds_match);
610 
611 static struct i2c_driver lp50xx_driver = {
612 	.driver = {
613 		.name	= "lp50xx",
614 		.of_match_table = of_lp50xx_leds_match,
615 	},
616 	.probe_new	= lp50xx_probe,
617 	.remove		= lp50xx_remove,
618 	.id_table	= lp50xx_id,
619 };
620 module_i2c_driver(lp50xx_driver);
621 
622 MODULE_DESCRIPTION("Texas Instruments LP50XX LED driver");
623 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
624 MODULE_LICENSE("GPL v2");
625