1 // SPDX-License-Identifier: GPL-2.0 2 // TI LP50XX LED chip family driver 3 // Copyright (C) 2018-20 Texas Instruments Incorporated - https://www.ti.com/ 4 5 #include <linux/gpio/consumer.h> 6 #include <linux/i2c.h> 7 #include <linux/init.h> 8 #include <linux/leds.h> 9 #include <linux/mod_devicetable.h> 10 #include <linux/module.h> 11 #include <linux/mutex.h> 12 #include <linux/regmap.h> 13 #include <linux/regulator/consumer.h> 14 #include <linux/slab.h> 15 #include <uapi/linux/uleds.h> 16 17 #include <linux/led-class-multicolor.h> 18 19 #include "leds.h" 20 21 #define LP50XX_DEV_CFG0 0x00 22 #define LP50XX_DEV_CFG1 0x01 23 #define LP50XX_LED_CFG0 0x02 24 25 /* LP5009 and LP5012 registers */ 26 #define LP5012_BNK_BRT 0x03 27 #define LP5012_BNKA_CLR 0x04 28 #define LP5012_BNKB_CLR 0x05 29 #define LP5012_BNKC_CLR 0x06 30 #define LP5012_LED0_BRT 0x07 31 #define LP5012_OUT0_CLR 0x0b 32 #define LP5012_RESET 0x17 33 34 /* LP5018 and LP5024 registers */ 35 #define LP5024_BNK_BRT 0x03 36 #define LP5024_BNKA_CLR 0x04 37 #define LP5024_BNKB_CLR 0x05 38 #define LP5024_BNKC_CLR 0x06 39 #define LP5024_LED0_BRT 0x07 40 #define LP5024_OUT0_CLR 0x0f 41 #define LP5024_RESET 0x27 42 43 /* LP5030 and LP5036 registers */ 44 #define LP5036_LED_CFG1 0x03 45 #define LP5036_BNK_BRT 0x04 46 #define LP5036_BNKA_CLR 0x05 47 #define LP5036_BNKB_CLR 0x06 48 #define LP5036_BNKC_CLR 0x07 49 #define LP5036_LED0_BRT 0x08 50 #define LP5036_OUT0_CLR 0x14 51 #define LP5036_RESET 0x38 52 53 #define LP50XX_SW_RESET 0xff 54 #define LP50XX_CHIP_EN BIT(6) 55 56 /* There are 3 LED outputs per bank */ 57 #define LP50XX_LEDS_PER_MODULE 3 58 59 #define LP5009_MAX_LED_MODULES 2 60 #define LP5012_MAX_LED_MODULES 4 61 #define LP5018_MAX_LED_MODULES 6 62 #define LP5024_MAX_LED_MODULES 8 63 #define LP5030_MAX_LED_MODULES 10 64 #define LP5036_MAX_LED_MODULES 12 65 66 static const struct reg_default lp5012_reg_defs[] = { 67 {LP50XX_DEV_CFG0, 0x0}, 68 {LP50XX_DEV_CFG1, 0x3c}, 69 {LP50XX_LED_CFG0, 0x0}, 70 {LP5012_BNK_BRT, 0xff}, 71 {LP5012_BNKA_CLR, 0x0f}, 72 {LP5012_BNKB_CLR, 0x0f}, 73 {LP5012_BNKC_CLR, 0x0f}, 74 {LP5012_LED0_BRT, 0x0f}, 75 /* LEDX_BRT registers are all 0xff for defaults */ 76 {0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff}, 77 {LP5012_OUT0_CLR, 0x0f}, 78 /* OUTX_CLR registers are all 0x0 for defaults */ 79 {0x0c, 0x00}, {0x0d, 0x00}, {0x0e, 0x00}, {0x0f, 0x00}, {0x10, 0x00}, 80 {0x11, 0x00}, {0x12, 0x00}, {0x13, 0x00}, {0x14, 0x00}, {0x15, 0x00}, 81 {0x16, 0x00}, 82 {LP5012_RESET, 0x00} 83 }; 84 85 static const struct reg_default lp5024_reg_defs[] = { 86 {LP50XX_DEV_CFG0, 0x0}, 87 {LP50XX_DEV_CFG1, 0x3c}, 88 {LP50XX_LED_CFG0, 0x0}, 89 {LP5024_BNK_BRT, 0xff}, 90 {LP5024_BNKA_CLR, 0x0f}, 91 {LP5024_BNKB_CLR, 0x0f}, 92 {LP5024_BNKC_CLR, 0x0f}, 93 {LP5024_LED0_BRT, 0x0f}, 94 /* LEDX_BRT registers are all 0xff for defaults */ 95 {0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff}, {0x0b, 0xff}, {0x0c, 0xff}, 96 {0x0d, 0xff}, {0x0e, 0xff}, 97 {LP5024_OUT0_CLR, 0x0f}, 98 /* OUTX_CLR registers are all 0x0 for defaults */ 99 {0x10, 0x00}, {0x11, 0x00}, {0x12, 0x00}, {0x13, 0x00}, {0x14, 0x00}, 100 {0x15, 0x00}, {0x16, 0x00}, {0x17, 0x00}, {0x18, 0x00}, {0x19, 0x00}, 101 {0x1a, 0x00}, {0x1b, 0x00}, {0x1c, 0x00}, {0x1d, 0x00}, {0x1e, 0x00}, 102 {0x1f, 0x00}, {0x20, 0x00}, {0x21, 0x00}, {0x22, 0x00}, {0x23, 0x00}, 103 {0x24, 0x00}, {0x25, 0x00}, {0x26, 0x00}, 104 {LP5024_RESET, 0x00} 105 }; 106 107 static const struct reg_default lp5036_reg_defs[] = { 108 {LP50XX_DEV_CFG0, 0x0}, 109 {LP50XX_DEV_CFG1, 0x3c}, 110 {LP50XX_LED_CFG0, 0x0}, 111 {LP5036_LED_CFG1, 0x0}, 112 {LP5036_BNK_BRT, 0xff}, 113 {LP5036_BNKA_CLR, 0x0f}, 114 {LP5036_BNKB_CLR, 0x0f}, 115 {LP5036_BNKC_CLR, 0x0f}, 116 {LP5036_LED0_BRT, 0x0f}, 117 /* LEDX_BRT registers are all 0xff for defaults */ 118 {0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff}, {0x0b, 0xff}, {0x0c, 0xff}, 119 {0x0d, 0xff}, {0x0e, 0xff}, {0x0f, 0xff}, {0x10, 0xff}, {0x11, 0xff}, 120 {0x12, 0xff}, {0x13, 0xff}, 121 {LP5036_OUT0_CLR, 0x0f}, 122 /* OUTX_CLR registers are all 0x0 for defaults */ 123 {0x15, 0x00}, {0x16, 0x00}, {0x17, 0x00}, {0x18, 0x00}, {0x19, 0x00}, 124 {0x1a, 0x00}, {0x1b, 0x00}, {0x1c, 0x00}, {0x1d, 0x00}, {0x1e, 0x00}, 125 {0x1f, 0x00}, {0x20, 0x00}, {0x21, 0x00}, {0x22, 0x00}, {0x23, 0x00}, 126 {0x24, 0x00}, {0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00}, 127 {0x29, 0x00}, {0x2a, 0x00}, {0x2b, 0x00}, {0x2c, 0x00}, {0x2d, 0x00}, 128 {0x2e, 0x00}, {0x2f, 0x00}, {0x30, 0x00}, {0x31, 0x00}, {0x32, 0x00}, 129 {0x33, 0x00}, {0x34, 0x00}, {0x35, 0x00}, {0x36, 0x00}, {0x37, 0x00}, 130 {LP5036_RESET, 0x00} 131 }; 132 133 static const struct regmap_config lp5012_regmap_config = { 134 .reg_bits = 8, 135 .val_bits = 8, 136 137 .max_register = LP5012_RESET, 138 .reg_defaults = lp5012_reg_defs, 139 .num_reg_defaults = ARRAY_SIZE(lp5012_reg_defs), 140 .cache_type = REGCACHE_FLAT, 141 }; 142 143 static const struct regmap_config lp5024_regmap_config = { 144 .reg_bits = 8, 145 .val_bits = 8, 146 147 .max_register = LP5024_RESET, 148 .reg_defaults = lp5024_reg_defs, 149 .num_reg_defaults = ARRAY_SIZE(lp5024_reg_defs), 150 .cache_type = REGCACHE_FLAT, 151 }; 152 153 static const struct regmap_config lp5036_regmap_config = { 154 .reg_bits = 8, 155 .val_bits = 8, 156 157 .max_register = LP5036_RESET, 158 .reg_defaults = lp5036_reg_defs, 159 .num_reg_defaults = ARRAY_SIZE(lp5036_reg_defs), 160 .cache_type = REGCACHE_FLAT, 161 }; 162 163 enum lp50xx_model { 164 LP5009, 165 LP5012, 166 LP5018, 167 LP5024, 168 LP5030, 169 LP5036, 170 }; 171 172 /** 173 * struct lp50xx_chip_info - 174 * @lp50xx_regmap_config: regmap register configuration 175 * @model_id: LED device model 176 * @max_modules: total number of supported LED modules 177 * @num_leds: number of LED outputs available on the device 178 * @led_brightness0_reg: first brightness register of the device 179 * @mix_out0_reg: first color mix register of the device 180 * @bank_brt_reg: bank brightness register 181 * @bank_mix_reg: color mix register 182 * @reset_reg: device reset register 183 */ 184 struct lp50xx_chip_info { 185 const struct regmap_config *lp50xx_regmap_config; 186 int model_id; 187 u8 max_modules; 188 u8 num_leds; 189 u8 led_brightness0_reg; 190 u8 mix_out0_reg; 191 u8 bank_brt_reg; 192 u8 bank_mix_reg; 193 u8 reset_reg; 194 }; 195 196 static const struct lp50xx_chip_info lp50xx_chip_info_tbl[] = { 197 [LP5009] = { 198 .model_id = LP5009, 199 .max_modules = LP5009_MAX_LED_MODULES, 200 .num_leds = LP5009_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE, 201 .led_brightness0_reg = LP5012_LED0_BRT, 202 .mix_out0_reg = LP5012_OUT0_CLR, 203 .bank_brt_reg = LP5012_BNK_BRT, 204 .bank_mix_reg = LP5012_BNKA_CLR, 205 .reset_reg = LP5012_RESET, 206 .lp50xx_regmap_config = &lp5012_regmap_config, 207 }, 208 [LP5012] = { 209 .model_id = LP5012, 210 .max_modules = LP5012_MAX_LED_MODULES, 211 .num_leds = LP5012_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE, 212 .led_brightness0_reg = LP5012_LED0_BRT, 213 .mix_out0_reg = LP5012_OUT0_CLR, 214 .bank_brt_reg = LP5012_BNK_BRT, 215 .bank_mix_reg = LP5012_BNKA_CLR, 216 .reset_reg = LP5012_RESET, 217 .lp50xx_regmap_config = &lp5012_regmap_config, 218 }, 219 [LP5018] = { 220 .model_id = LP5018, 221 .max_modules = LP5018_MAX_LED_MODULES, 222 .num_leds = LP5018_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE, 223 .led_brightness0_reg = LP5024_LED0_BRT, 224 .mix_out0_reg = LP5024_OUT0_CLR, 225 .bank_brt_reg = LP5024_BNK_BRT, 226 .bank_mix_reg = LP5024_BNKA_CLR, 227 .reset_reg = LP5024_RESET, 228 .lp50xx_regmap_config = &lp5024_regmap_config, 229 }, 230 [LP5024] = { 231 .model_id = LP5024, 232 .max_modules = LP5024_MAX_LED_MODULES, 233 .num_leds = LP5024_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE, 234 .led_brightness0_reg = LP5024_LED0_BRT, 235 .mix_out0_reg = LP5024_OUT0_CLR, 236 .bank_brt_reg = LP5024_BNK_BRT, 237 .bank_mix_reg = LP5024_BNKA_CLR, 238 .reset_reg = LP5024_RESET, 239 .lp50xx_regmap_config = &lp5024_regmap_config, 240 }, 241 [LP5030] = { 242 .model_id = LP5030, 243 .max_modules = LP5030_MAX_LED_MODULES, 244 .num_leds = LP5030_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE, 245 .led_brightness0_reg = LP5036_LED0_BRT, 246 .mix_out0_reg = LP5036_OUT0_CLR, 247 .bank_brt_reg = LP5036_BNK_BRT, 248 .bank_mix_reg = LP5036_BNKA_CLR, 249 .reset_reg = LP5036_RESET, 250 .lp50xx_regmap_config = &lp5036_regmap_config, 251 }, 252 [LP5036] = { 253 .model_id = LP5036, 254 .max_modules = LP5036_MAX_LED_MODULES, 255 .num_leds = LP5036_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE, 256 .led_brightness0_reg = LP5036_LED0_BRT, 257 .mix_out0_reg = LP5036_OUT0_CLR, 258 .bank_brt_reg = LP5036_BNK_BRT, 259 .bank_mix_reg = LP5036_BNKA_CLR, 260 .reset_reg = LP5036_RESET, 261 .lp50xx_regmap_config = &lp5036_regmap_config, 262 }, 263 }; 264 265 struct lp50xx_led { 266 struct led_classdev_mc mc_cdev; 267 struct lp50xx *priv; 268 unsigned long bank_modules; 269 u8 ctrl_bank_enabled; 270 int led_number; 271 }; 272 273 /** 274 * struct lp50xx - 275 * @enable_gpio: hardware enable gpio 276 * @regulator: LED supply regulator pointer 277 * @client: pointer to the I2C client 278 * @regmap: device register map 279 * @dev: pointer to the devices device struct 280 * @lock: lock for reading/writing the device 281 * @chip_info: chip specific information (ie num_leds) 282 * @num_of_banked_leds: holds the number of banked LEDs 283 * @leds: array of LED strings 284 */ 285 struct lp50xx { 286 struct gpio_desc *enable_gpio; 287 struct regulator *regulator; 288 struct i2c_client *client; 289 struct regmap *regmap; 290 struct device *dev; 291 struct mutex lock; 292 const struct lp50xx_chip_info *chip_info; 293 int num_of_banked_leds; 294 295 /* This needs to be at the end of the struct */ 296 struct lp50xx_led leds[]; 297 }; 298 299 static struct lp50xx_led *mcled_cdev_to_led(struct led_classdev_mc *mc_cdev) 300 { 301 return container_of(mc_cdev, struct lp50xx_led, mc_cdev); 302 } 303 304 static int lp50xx_brightness_set(struct led_classdev *cdev, 305 enum led_brightness brightness) 306 { 307 struct led_classdev_mc *mc_dev = lcdev_to_mccdev(cdev); 308 struct lp50xx_led *led = mcled_cdev_to_led(mc_dev); 309 const struct lp50xx_chip_info *led_chip = led->priv->chip_info; 310 u8 led_offset, reg_val; 311 int ret = 0; 312 int i; 313 314 mutex_lock(&led->priv->lock); 315 if (led->ctrl_bank_enabled) 316 reg_val = led_chip->bank_brt_reg; 317 else 318 reg_val = led_chip->led_brightness0_reg + 319 led->led_number; 320 321 ret = regmap_write(led->priv->regmap, reg_val, brightness); 322 if (ret) { 323 dev_err(led->priv->dev, 324 "Cannot write brightness value %d\n", ret); 325 goto out; 326 } 327 328 for (i = 0; i < led->mc_cdev.num_colors; i++) { 329 if (led->ctrl_bank_enabled) { 330 reg_val = led_chip->bank_mix_reg + i; 331 } else { 332 led_offset = (led->led_number * 3) + i; 333 reg_val = led_chip->mix_out0_reg + led_offset; 334 } 335 336 ret = regmap_write(led->priv->regmap, reg_val, 337 mc_dev->subled_info[i].intensity); 338 if (ret) { 339 dev_err(led->priv->dev, 340 "Cannot write intensity value %d\n", ret); 341 goto out; 342 } 343 } 344 out: 345 mutex_unlock(&led->priv->lock); 346 return ret; 347 } 348 349 static int lp50xx_set_banks(struct lp50xx *priv, u32 led_banks[]) 350 { 351 u8 led_config_lo, led_config_hi; 352 u32 bank_enable_mask = 0; 353 int ret; 354 int i; 355 356 for (i = 0; i < priv->chip_info->max_modules; i++) { 357 if (led_banks[i]) 358 bank_enable_mask |= (1 << led_banks[i]); 359 } 360 361 led_config_lo = bank_enable_mask; 362 led_config_hi = bank_enable_mask >> 8; 363 364 ret = regmap_write(priv->regmap, LP50XX_LED_CFG0, led_config_lo); 365 if (ret) 366 return ret; 367 368 if (priv->chip_info->model_id >= LP5030) 369 ret = regmap_write(priv->regmap, LP5036_LED_CFG1, led_config_hi); 370 371 return ret; 372 } 373 374 static int lp50xx_reset(struct lp50xx *priv) 375 { 376 return regmap_write(priv->regmap, priv->chip_info->reset_reg, LP50XX_SW_RESET); 377 } 378 379 static int lp50xx_enable_disable(struct lp50xx *priv, int enable_disable) 380 { 381 int ret; 382 383 ret = gpiod_direction_output(priv->enable_gpio, enable_disable); 384 if (ret) 385 return ret; 386 387 if (enable_disable) 388 return regmap_write(priv->regmap, LP50XX_DEV_CFG0, LP50XX_CHIP_EN); 389 else 390 return regmap_write(priv->regmap, LP50XX_DEV_CFG0, 0); 391 392 } 393 394 static int lp50xx_probe_leds(struct fwnode_handle *child, struct lp50xx *priv, 395 struct lp50xx_led *led, int num_leds) 396 { 397 u32 led_banks[LP5036_MAX_LED_MODULES] = {0}; 398 int led_number; 399 int ret; 400 401 if (num_leds > 1) { 402 if (num_leds > priv->chip_info->max_modules) { 403 dev_err(priv->dev, "reg property is invalid\n"); 404 return -EINVAL; 405 } 406 407 priv->num_of_banked_leds = num_leds; 408 409 ret = fwnode_property_read_u32_array(child, "reg", led_banks, num_leds); 410 if (ret) { 411 dev_err(priv->dev, "reg property is missing\n"); 412 return ret; 413 } 414 415 ret = lp50xx_set_banks(priv, led_banks); 416 if (ret) { 417 dev_err(priv->dev, "Cannot setup banked LEDs\n"); 418 return ret; 419 } 420 421 led->ctrl_bank_enabled = 1; 422 } else { 423 ret = fwnode_property_read_u32(child, "reg", &led_number); 424 if (ret) { 425 dev_err(priv->dev, "led reg property missing\n"); 426 return ret; 427 } 428 429 if (led_number > priv->chip_info->num_leds) { 430 dev_err(priv->dev, "led-sources property is invalid\n"); 431 return -EINVAL; 432 } 433 434 led->led_number = led_number; 435 } 436 437 return 0; 438 } 439 440 static int lp50xx_probe_dt(struct lp50xx *priv) 441 { 442 struct fwnode_handle *child = NULL; 443 struct fwnode_handle *led_node = NULL; 444 struct led_init_data init_data = {}; 445 struct led_classdev *led_cdev; 446 struct mc_subled *mc_led_info; 447 struct lp50xx_led *led; 448 int ret = -EINVAL; 449 int num_colors; 450 u32 color_id; 451 int i = 0; 452 453 priv->enable_gpio = devm_gpiod_get_optional(priv->dev, "enable", GPIOD_OUT_LOW); 454 if (IS_ERR(priv->enable_gpio)) 455 return dev_err_probe(priv->dev, PTR_ERR(priv->enable_gpio), 456 "Failed to get enable GPIO\n"); 457 458 priv->regulator = devm_regulator_get(priv->dev, "vled"); 459 if (IS_ERR(priv->regulator)) 460 priv->regulator = NULL; 461 462 device_for_each_child_node(priv->dev, child) { 463 led = &priv->leds[i]; 464 ret = fwnode_property_count_u32(child, "reg"); 465 if (ret < 0) { 466 dev_err(priv->dev, "reg property is invalid\n"); 467 goto child_out; 468 } 469 470 ret = lp50xx_probe_leds(child, priv, led, ret); 471 if (ret) 472 goto child_out; 473 474 init_data.fwnode = child; 475 num_colors = 0; 476 477 /* 478 * There are only 3 LEDs per module otherwise they should be 479 * banked which also is presented as 3 LEDs. 480 */ 481 mc_led_info = devm_kcalloc(priv->dev, LP50XX_LEDS_PER_MODULE, 482 sizeof(*mc_led_info), GFP_KERNEL); 483 if (!mc_led_info) { 484 ret = -ENOMEM; 485 goto child_out; 486 } 487 488 fwnode_for_each_child_node(child, led_node) { 489 ret = fwnode_property_read_u32(led_node, "color", 490 &color_id); 491 if (ret) { 492 fwnode_handle_put(led_node); 493 dev_err(priv->dev, "Cannot read color\n"); 494 goto child_out; 495 } 496 497 mc_led_info[num_colors].color_index = color_id; 498 num_colors++; 499 } 500 501 led->priv = priv; 502 led->mc_cdev.num_colors = num_colors; 503 led->mc_cdev.subled_info = mc_led_info; 504 led_cdev = &led->mc_cdev.led_cdev; 505 led_cdev->brightness_set_blocking = lp50xx_brightness_set; 506 507 ret = devm_led_classdev_multicolor_register_ext(priv->dev, 508 &led->mc_cdev, 509 &init_data); 510 if (ret) { 511 dev_err(priv->dev, "led register err: %d\n", ret); 512 goto child_out; 513 } 514 i++; 515 } 516 517 return 0; 518 519 child_out: 520 fwnode_handle_put(child); 521 return ret; 522 } 523 524 static int lp50xx_probe(struct i2c_client *client) 525 { 526 struct lp50xx *led; 527 int count; 528 int ret; 529 530 count = device_get_child_node_count(&client->dev); 531 if (!count) { 532 dev_err(&client->dev, "LEDs are not defined in device tree!"); 533 return -ENODEV; 534 } 535 536 led = devm_kzalloc(&client->dev, struct_size(led, leds, count), 537 GFP_KERNEL); 538 if (!led) 539 return -ENOMEM; 540 541 mutex_init(&led->lock); 542 led->client = client; 543 led->dev = &client->dev; 544 led->chip_info = device_get_match_data(&client->dev); 545 i2c_set_clientdata(client, led); 546 led->regmap = devm_regmap_init_i2c(client, 547 led->chip_info->lp50xx_regmap_config); 548 if (IS_ERR(led->regmap)) { 549 ret = PTR_ERR(led->regmap); 550 dev_err(&client->dev, "Failed to allocate register map: %d\n", 551 ret); 552 return ret; 553 } 554 555 ret = lp50xx_reset(led); 556 if (ret) 557 return ret; 558 559 ret = lp50xx_enable_disable(led, 1); 560 if (ret) 561 return ret; 562 563 return lp50xx_probe_dt(led); 564 } 565 566 static void lp50xx_remove(struct i2c_client *client) 567 { 568 struct lp50xx *led = i2c_get_clientdata(client); 569 int ret; 570 571 ret = lp50xx_enable_disable(led, 0); 572 if (ret) 573 dev_err(led->dev, "Failed to disable chip\n"); 574 575 if (led->regulator) { 576 ret = regulator_disable(led->regulator); 577 if (ret) 578 dev_err(led->dev, "Failed to disable regulator\n"); 579 } 580 581 mutex_destroy(&led->lock); 582 } 583 584 static const struct i2c_device_id lp50xx_id[] = { 585 { "lp5009", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5009] }, 586 { "lp5012", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5012] }, 587 { "lp5018", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5018] }, 588 { "lp5024", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5024] }, 589 { "lp5030", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5030] }, 590 { "lp5036", (kernel_ulong_t)&lp50xx_chip_info_tbl[LP5036] }, 591 { } 592 }; 593 MODULE_DEVICE_TABLE(i2c, lp50xx_id); 594 595 static const struct of_device_id of_lp50xx_leds_match[] = { 596 { .compatible = "ti,lp5009", .data = &lp50xx_chip_info_tbl[LP5009] }, 597 { .compatible = "ti,lp5012", .data = &lp50xx_chip_info_tbl[LP5012] }, 598 { .compatible = "ti,lp5018", .data = &lp50xx_chip_info_tbl[LP5018] }, 599 { .compatible = "ti,lp5024", .data = &lp50xx_chip_info_tbl[LP5024] }, 600 { .compatible = "ti,lp5030", .data = &lp50xx_chip_info_tbl[LP5030] }, 601 { .compatible = "ti,lp5036", .data = &lp50xx_chip_info_tbl[LP5036] }, 602 {} 603 }; 604 MODULE_DEVICE_TABLE(of, of_lp50xx_leds_match); 605 606 static struct i2c_driver lp50xx_driver = { 607 .driver = { 608 .name = "lp50xx", 609 .of_match_table = of_lp50xx_leds_match, 610 }, 611 .probe_new = lp50xx_probe, 612 .remove = lp50xx_remove, 613 .id_table = lp50xx_id, 614 }; 615 module_i2c_driver(lp50xx_driver); 616 617 MODULE_DESCRIPTION("Texas Instruments LP50XX LED driver"); 618 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>"); 619 MODULE_LICENSE("GPL v2"); 620