1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * LED driver for TI lp3952 controller 4 * 5 * Copyright (C) 2016, DAQRI, LLC. 6 * Author: Tony Makkiel <tony.makkiel@daqri.com> 7 */ 8 9 #include <linux/delay.h> 10 #include <linux/gpio/consumer.h> 11 #include <linux/i2c.h> 12 #include <linux/io.h> 13 #include <linux/kernel.h> 14 #include <linux/leds.h> 15 #include <linux/leds-lp3952.h> 16 #include <linux/module.h> 17 #include <linux/notifier.h> 18 #include <linux/platform_device.h> 19 #include <linux/pm.h> 20 #include <linux/reboot.h> 21 #include <linux/regmap.h> 22 23 static int lp3952_register_write(struct i2c_client *client, u8 reg, u8 val) 24 { 25 int ret; 26 struct lp3952_led_array *priv = i2c_get_clientdata(client); 27 28 ret = regmap_write(priv->regmap, reg, val); 29 30 if (ret) 31 dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n", 32 __func__, reg, val, ret); 33 return ret; 34 } 35 36 static void lp3952_on_off(struct lp3952_led_array *priv, 37 enum lp3952_leds led_id, bool on) 38 { 39 int ret, val; 40 41 dev_dbg(&priv->client->dev, "%s LED %d to %d\n", __func__, led_id, on); 42 43 val = 1 << led_id; 44 if (led_id == LP3952_LED_ALL) 45 val = LP3952_LED_MASK_ALL; 46 47 ret = regmap_update_bits(priv->regmap, LP3952_REG_LED_CTRL, val, 48 on ? val : 0); 49 if (ret) 50 dev_err(&priv->client->dev, "%s, Error %d\n", __func__, ret); 51 } 52 53 /* 54 * Using Imax to control brightness. There are 4 possible 55 * setting 25, 50, 75 and 100 % of Imax. Possible values are 56 * values 0-4. 0 meaning turn off. 57 */ 58 static int lp3952_set_brightness(struct led_classdev *cdev, 59 enum led_brightness value) 60 { 61 unsigned int reg, shift_val; 62 struct lp3952_ctrl_hdl *led = container_of(cdev, 63 struct lp3952_ctrl_hdl, 64 cdev); 65 struct lp3952_led_array *priv = (struct lp3952_led_array *)led->priv; 66 67 dev_dbg(cdev->dev, "Brightness request: %d on %d\n", value, 68 led->channel); 69 70 if (value == LED_OFF) { 71 lp3952_on_off(priv, led->channel, false); 72 return 0; 73 } 74 75 if (led->channel > LP3952_RED_1) { 76 dev_err(cdev->dev, " %s Invalid LED requested", __func__); 77 return -EINVAL; 78 } 79 80 if (led->channel >= LP3952_BLUE_1) { 81 reg = LP3952_REG_RGB1_MAX_I_CTRL; 82 shift_val = (led->channel - LP3952_BLUE_1) * 2; 83 } else { 84 reg = LP3952_REG_RGB2_MAX_I_CTRL; 85 shift_val = led->channel * 2; 86 } 87 88 /* Enable the LED in case it is not enabled already */ 89 lp3952_on_off(priv, led->channel, true); 90 91 return regmap_update_bits(priv->regmap, reg, 3 << shift_val, 92 --value << shift_val); 93 } 94 95 static int lp3952_get_label(struct device *dev, const char *label, char *dest) 96 { 97 int ret; 98 const char *str; 99 100 ret = device_property_read_string(dev, label, &str); 101 if (ret) 102 return ret; 103 104 strncpy(dest, str, LP3952_LABEL_MAX_LEN); 105 return 0; 106 } 107 108 static int lp3952_register_led_classdev(struct lp3952_led_array *priv) 109 { 110 int i, acpi_ret, ret = -ENODEV; 111 static const char *led_name_hdl[LP3952_LED_ALL] = { 112 "blue2", 113 "green2", 114 "red2", 115 "blue1", 116 "green1", 117 "red1" 118 }; 119 120 for (i = 0; i < LP3952_LED_ALL; i++) { 121 acpi_ret = lp3952_get_label(&priv->client->dev, led_name_hdl[i], 122 priv->leds[i].name); 123 if (acpi_ret) 124 continue; 125 126 priv->leds[i].cdev.name = priv->leds[i].name; 127 priv->leds[i].cdev.brightness = LED_OFF; 128 priv->leds[i].cdev.max_brightness = LP3952_BRIGHT_MAX; 129 priv->leds[i].cdev.brightness_set_blocking = 130 lp3952_set_brightness; 131 priv->leds[i].channel = i; 132 priv->leds[i].priv = priv; 133 134 ret = devm_led_classdev_register(&priv->client->dev, 135 &priv->leds[i].cdev); 136 if (ret < 0) { 137 dev_err(&priv->client->dev, 138 "couldn't register LED %s\n", 139 priv->leds[i].cdev.name); 140 break; 141 } 142 } 143 return ret; 144 } 145 146 static int lp3952_set_pattern_gen_cmd(struct lp3952_led_array *priv, 147 u8 cmd_index, u8 r, u8 g, u8 b, 148 enum lp3952_tt tt, enum lp3952_cet cet) 149 { 150 int ret; 151 struct ptrn_gen_cmd line = { 152 { 153 { 154 .r = r, 155 .g = g, 156 .b = b, 157 .cet = cet, 158 .tt = tt 159 } 160 } 161 }; 162 163 if (cmd_index >= LP3952_CMD_REG_COUNT) 164 return -EINVAL; 165 166 ret = lp3952_register_write(priv->client, 167 LP3952_REG_CMD_0 + cmd_index * 2, 168 line.bytes.msb); 169 if (ret) 170 return ret; 171 172 return lp3952_register_write(priv->client, 173 LP3952_REG_CMD_0 + cmd_index * 2 + 1, 174 line.bytes.lsb); 175 } 176 177 static int lp3952_configure(struct lp3952_led_array *priv) 178 { 179 int ret; 180 181 /* Disable any LEDs on from any previous conf. */ 182 ret = lp3952_register_write(priv->client, LP3952_REG_LED_CTRL, 0); 183 if (ret) 184 return ret; 185 186 /* enable rgb patter, loop */ 187 ret = lp3952_register_write(priv->client, LP3952_REG_PAT_GEN_CTRL, 188 LP3952_PATRN_LOOP | LP3952_PATRN_GEN_EN); 189 if (ret) 190 return ret; 191 192 /* Update Bit 6 (Active mode), Select both Led sets, Bit [1:0] */ 193 ret = lp3952_register_write(priv->client, LP3952_REG_ENABLES, 194 LP3952_ACTIVE_MODE | LP3952_INT_B00ST_LDR); 195 if (ret) 196 return ret; 197 198 /* Set Cmd1 for RGB intensity,cmd and transition time */ 199 return lp3952_set_pattern_gen_cmd(priv, 0, I46, I71, I100, TT0, 200 CET197); 201 } 202 203 static const struct regmap_config lp3952_regmap = { 204 .reg_bits = 8, 205 .val_bits = 8, 206 .max_register = REG_MAX, 207 .cache_type = REGCACHE_RBTREE, 208 }; 209 210 static int lp3952_probe(struct i2c_client *client, 211 const struct i2c_device_id *id) 212 { 213 int status; 214 struct lp3952_led_array *priv; 215 216 priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); 217 if (!priv) 218 return -ENOMEM; 219 220 priv->client = client; 221 222 priv->enable_gpio = devm_gpiod_get(&client->dev, "nrst", 223 GPIOD_OUT_HIGH); 224 if (IS_ERR(priv->enable_gpio)) { 225 status = PTR_ERR(priv->enable_gpio); 226 dev_err(&client->dev, "Failed to enable gpio: %d\n", status); 227 return status; 228 } 229 230 priv->regmap = devm_regmap_init_i2c(client, &lp3952_regmap); 231 if (IS_ERR(priv->regmap)) { 232 int err = PTR_ERR(priv->regmap); 233 234 dev_err(&client->dev, "Failed to allocate register map: %d\n", 235 err); 236 return err; 237 } 238 239 i2c_set_clientdata(client, priv); 240 241 status = lp3952_configure(priv); 242 if (status) { 243 dev_err(&client->dev, "Probe failed. Device not found (%d)\n", 244 status); 245 return status; 246 } 247 248 status = lp3952_register_led_classdev(priv); 249 if (status) { 250 dev_err(&client->dev, "Unable to register led_classdev: %d\n", 251 status); 252 return status; 253 } 254 255 return 0; 256 } 257 258 static void lp3952_remove(struct i2c_client *client) 259 { 260 struct lp3952_led_array *priv; 261 262 priv = i2c_get_clientdata(client); 263 lp3952_on_off(priv, LP3952_LED_ALL, false); 264 gpiod_set_value(priv->enable_gpio, 0); 265 } 266 267 static const struct i2c_device_id lp3952_id[] = { 268 {LP3952_NAME, 0}, 269 {} 270 }; 271 MODULE_DEVICE_TABLE(i2c, lp3952_id); 272 273 static struct i2c_driver lp3952_i2c_driver = { 274 .driver = { 275 .name = LP3952_NAME, 276 }, 277 .probe = lp3952_probe, 278 .remove = lp3952_remove, 279 .id_table = lp3952_id, 280 }; 281 282 module_i2c_driver(lp3952_i2c_driver); 283 284 MODULE_AUTHOR("Tony Makkiel <tony.makkiel@daqri.com>"); 285 MODULE_DESCRIPTION("lp3952 I2C LED controller driver"); 286 MODULE_LICENSE("GPL v2"); 287