xref: /openbmc/linux/drivers/leds/leds-lm3697.c (revision be122522)
1 // SPDX-License-Identifier: GPL-2.0
2 // TI LM3697 LED chip family driver
3 // Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
4 
5 #include <linux/gpio/consumer.h>
6 #include <linux/i2c.h>
7 #include <linux/of.h>
8 #include <linux/of_gpio.h>
9 #include <linux/regulator/consumer.h>
10 #include <linux/leds-ti-lmu-common.h>
11 
12 #define LM3697_REV			0x0
13 #define LM3697_RESET			0x1
14 #define LM3697_OUTPUT_CONFIG		0x10
15 #define LM3697_CTRL_A_RAMP		0x11
16 #define LM3697_CTRL_B_RAMP		0x12
17 #define LM3697_CTRL_A_B_RT_RAMP		0x13
18 #define LM3697_CTRL_A_B_RAMP_CFG	0x14
19 #define LM3697_CTRL_A_B_BRT_CFG		0x16
20 #define LM3697_CTRL_A_FS_CURR_CFG	0x17
21 #define LM3697_CTRL_B_FS_CURR_CFG	0x18
22 #define LM3697_PWM_CFG			0x1c
23 #define LM3697_CTRL_A_BRT_LSB		0x20
24 #define LM3697_CTRL_A_BRT_MSB		0x21
25 #define LM3697_CTRL_B_BRT_LSB		0x22
26 #define LM3697_CTRL_B_BRT_MSB		0x23
27 #define LM3697_CTRL_ENABLE		0x24
28 
29 #define LM3697_SW_RESET		BIT(0)
30 
31 #define LM3697_CTRL_A_EN	BIT(0)
32 #define LM3697_CTRL_B_EN	BIT(1)
33 #define LM3697_CTRL_A_B_EN	(LM3697_CTRL_A_EN | LM3697_CTRL_B_EN)
34 
35 #define LM3697_MAX_LED_STRINGS	3
36 
37 #define LM3697_CONTROL_A	0
38 #define LM3697_CONTROL_B	1
39 #define LM3697_MAX_CONTROL_BANKS 2
40 
41 /**
42  * struct lm3697_led -
43  * @hvled_strings: Array of LED strings associated with a control bank
44  * @label: LED label
45  * @led_dev: LED class device
46  * @priv: Pointer to the device struct
47  * @lmu_data: Register and setting values for common code
48  * @control_bank: Control bank the LED is associated to. 0 is control bank A
49  *		   1 is control bank B
50  */
51 struct lm3697_led {
52 	u32 hvled_strings[LM3697_MAX_LED_STRINGS];
53 	char label[LED_MAX_NAME_SIZE];
54 	struct led_classdev led_dev;
55 	struct lm3697 *priv;
56 	struct ti_lmu_bank lmu_data;
57 	int control_bank;
58 	int enabled;
59 	int num_leds;
60 };
61 
62 /**
63  * struct lm3697 -
64  * @enable_gpio: Hardware enable gpio
65  * @regulator: LED supply regulator pointer
66  * @client: Pointer to the I2C client
67  * @regmap: Devices register map
68  * @dev: Pointer to the devices device struct
69  * @lock: Lock for reading/writing the device
70  * @leds: Array of LED strings
71  */
72 struct lm3697 {
73 	struct gpio_desc *enable_gpio;
74 	struct regulator *regulator;
75 	struct i2c_client *client;
76 	struct regmap *regmap;
77 	struct device *dev;
78 	struct mutex lock;
79 
80 	int bank_cfg;
81 
82 	struct lm3697_led leds[];
83 };
84 
85 static const struct reg_default lm3697_reg_defs[] = {
86 	{LM3697_OUTPUT_CONFIG, 0x6},
87 	{LM3697_CTRL_A_RAMP, 0x0},
88 	{LM3697_CTRL_B_RAMP, 0x0},
89 	{LM3697_CTRL_A_B_RT_RAMP, 0x0},
90 	{LM3697_CTRL_A_B_RAMP_CFG, 0x0},
91 	{LM3697_CTRL_A_B_BRT_CFG, 0x0},
92 	{LM3697_CTRL_A_FS_CURR_CFG, 0x13},
93 	{LM3697_CTRL_B_FS_CURR_CFG, 0x13},
94 	{LM3697_PWM_CFG, 0xc},
95 	{LM3697_CTRL_A_BRT_LSB, 0x0},
96 	{LM3697_CTRL_A_BRT_MSB, 0x0},
97 	{LM3697_CTRL_B_BRT_LSB, 0x0},
98 	{LM3697_CTRL_B_BRT_MSB, 0x0},
99 	{LM3697_CTRL_ENABLE, 0x0},
100 };
101 
102 static const struct regmap_config lm3697_regmap_config = {
103 	.reg_bits = 8,
104 	.val_bits = 8,
105 
106 	.max_register = LM3697_CTRL_ENABLE,
107 	.reg_defaults = lm3697_reg_defs,
108 	.num_reg_defaults = ARRAY_SIZE(lm3697_reg_defs),
109 	.cache_type = REGCACHE_FLAT,
110 };
111 
112 static int lm3697_brightness_set(struct led_classdev *led_cdev,
113 				enum led_brightness brt_val)
114 {
115 	struct lm3697_led *led = container_of(led_cdev, struct lm3697_led,
116 					      led_dev);
117 	int ctrl_en_val = (1 << led->control_bank);
118 	int ret;
119 
120 	mutex_lock(&led->priv->lock);
121 
122 	if (brt_val == LED_OFF) {
123 		ret = regmap_update_bits(led->priv->regmap, LM3697_CTRL_ENABLE,
124 					 ctrl_en_val, ~ctrl_en_val);
125 		if (ret) {
126 			dev_err(&led->priv->client->dev, "Cannot write ctrl register\n");
127 			goto brightness_out;
128 		}
129 
130 		led->enabled = LED_OFF;
131 	} else {
132 		ret = ti_lmu_common_set_brightness(&led->lmu_data, brt_val);
133 		if (ret) {
134 			dev_err(&led->priv->client->dev,
135 				"Cannot write brightness\n");
136 			goto brightness_out;
137 		}
138 
139 		if (!led->enabled) {
140 			ret = regmap_update_bits(led->priv->regmap,
141 						 LM3697_CTRL_ENABLE,
142 						 ctrl_en_val, ctrl_en_val);
143 			if (ret) {
144 				dev_err(&led->priv->client->dev,
145 					"Cannot enable the device\n");
146 				goto brightness_out;
147 			}
148 
149 			led->enabled = brt_val;
150 		}
151 	}
152 
153 brightness_out:
154 	mutex_unlock(&led->priv->lock);
155 	return ret;
156 }
157 
158 static int lm3697_init(struct lm3697 *priv)
159 {
160 	struct lm3697_led *led;
161 	int i, ret;
162 
163 	if (priv->enable_gpio) {
164 		gpiod_direction_output(priv->enable_gpio, 1);
165 	} else {
166 		ret = regmap_write(priv->regmap, LM3697_RESET, LM3697_SW_RESET);
167 		if (ret) {
168 			dev_err(&priv->client->dev, "Cannot reset the device\n");
169 			goto out;
170 		}
171 	}
172 
173 	ret = regmap_write(priv->regmap, LM3697_CTRL_ENABLE, 0x0);
174 	if (ret) {
175 		dev_err(&priv->client->dev, "Cannot write ctrl enable\n");
176 		goto out;
177 	}
178 
179 	ret = regmap_write(priv->regmap, LM3697_OUTPUT_CONFIG, priv->bank_cfg);
180 	if (ret)
181 		dev_err(&priv->client->dev, "Cannot write OUTPUT config\n");
182 
183 	for (i = 0; i < LM3697_MAX_CONTROL_BANKS; i++) {
184 		led = &priv->leds[i];
185 		ret = ti_lmu_common_set_ramp(&led->lmu_data);
186 		if (ret)
187 			dev_err(&priv->client->dev, "Setting the ramp rate failed\n");
188 	}
189 out:
190 	return ret;
191 }
192 
193 static int lm3697_probe_dt(struct lm3697 *priv)
194 {
195 	struct fwnode_handle *child = NULL;
196 	struct lm3697_led *led;
197 	const char *name;
198 	int control_bank;
199 	size_t i = 0;
200 	int ret = -EINVAL;
201 	int j;
202 
203 	priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev,
204 						   "enable", GPIOD_OUT_LOW);
205 	if (IS_ERR(priv->enable_gpio)) {
206 		ret = PTR_ERR(priv->enable_gpio);
207 		dev_err(&priv->client->dev, "Failed to get enable gpio: %d\n",
208 			ret);
209 		return ret;
210 	}
211 
212 	priv->regulator = devm_regulator_get(&priv->client->dev, "vled");
213 	if (IS_ERR(priv->regulator))
214 		priv->regulator = NULL;
215 
216 	device_for_each_child_node(priv->dev, child) {
217 		ret = fwnode_property_read_u32(child, "reg", &control_bank);
218 		if (ret) {
219 			dev_err(&priv->client->dev, "reg property missing\n");
220 			fwnode_handle_put(child);
221 			goto child_out;
222 		}
223 
224 		if (control_bank > LM3697_CONTROL_B) {
225 			dev_err(&priv->client->dev, "reg property is invalid\n");
226 			ret = -EINVAL;
227 			fwnode_handle_put(child);
228 			goto child_out;
229 		}
230 
231 		led = &priv->leds[i];
232 
233 		ret = ti_lmu_common_get_brt_res(&priv->client->dev,
234 						child, &led->lmu_data);
235 		if (ret)
236 			dev_warn(&priv->client->dev, "brightness resolution property missing\n");
237 
238 		led->control_bank = control_bank;
239 		led->lmu_data.regmap = priv->regmap;
240 		led->lmu_data.runtime_ramp_reg = LM3697_CTRL_A_RAMP +
241 						 control_bank;
242 		led->lmu_data.msb_brightness_reg = LM3697_CTRL_A_BRT_MSB +
243 						   led->control_bank * 2;
244 		led->lmu_data.lsb_brightness_reg = LM3697_CTRL_A_BRT_LSB +
245 						   led->control_bank * 2;
246 
247 		led->num_leds = fwnode_property_count_u32(child, "led-sources");
248 		if (led->num_leds > LM3697_MAX_LED_STRINGS) {
249 			dev_err(&priv->client->dev, "To many LED strings defined\n");
250 			continue;
251 		}
252 
253 		ret = fwnode_property_read_u32_array(child, "led-sources",
254 						    led->hvled_strings,
255 						    led->num_leds);
256 		if (ret) {
257 			dev_err(&priv->client->dev, "led-sources property missing\n");
258 			fwnode_handle_put(child);
259 			goto child_out;
260 		}
261 
262 		for (j = 0; j < led->num_leds; j++)
263 			priv->bank_cfg |=
264 				(led->control_bank << led->hvled_strings[j]);
265 
266 		ret = ti_lmu_common_get_ramp_params(&priv->client->dev,
267 						    child, &led->lmu_data);
268 		if (ret)
269 			dev_warn(&priv->client->dev, "runtime-ramp properties missing\n");
270 
271 		fwnode_property_read_string(child, "linux,default-trigger",
272 					    &led->led_dev.default_trigger);
273 
274 		ret = fwnode_property_read_string(child, "label", &name);
275 		if (ret)
276 			snprintf(led->label, sizeof(led->label),
277 				"%s::", priv->client->name);
278 		else
279 			snprintf(led->label, sizeof(led->label),
280 				 "%s:%s", priv->client->name, name);
281 
282 		led->priv = priv;
283 		led->led_dev.name = led->label;
284 		led->led_dev.max_brightness = led->lmu_data.max_brightness;
285 		led->led_dev.brightness_set_blocking = lm3697_brightness_set;
286 
287 		ret = devm_led_classdev_register(priv->dev, &led->led_dev);
288 		if (ret) {
289 			dev_err(&priv->client->dev, "led register err: %d\n",
290 				ret);
291 			fwnode_handle_put(child);
292 			goto child_out;
293 		}
294 
295 		i++;
296 	}
297 
298 child_out:
299 	return ret;
300 }
301 
302 static int lm3697_probe(struct i2c_client *client,
303 			const struct i2c_device_id *id)
304 {
305 	struct lm3697 *led;
306 	int count;
307 	int ret;
308 
309 	count = device_get_child_node_count(&client->dev);
310 	if (!count) {
311 		dev_err(&client->dev, "LEDs are not defined in device tree!");
312 		return -ENODEV;
313 	}
314 
315 	led = devm_kzalloc(&client->dev, struct_size(led, leds, count),
316 			   GFP_KERNEL);
317 	if (!led)
318 		return -ENOMEM;
319 
320 	mutex_init(&led->lock);
321 	i2c_set_clientdata(client, led);
322 
323 	led->client = client;
324 	led->dev = &client->dev;
325 	led->regmap = devm_regmap_init_i2c(client, &lm3697_regmap_config);
326 	if (IS_ERR(led->regmap)) {
327 		ret = PTR_ERR(led->regmap);
328 		dev_err(&client->dev, "Failed to allocate register map: %d\n",
329 			ret);
330 		return ret;
331 	}
332 
333 	ret = lm3697_probe_dt(led);
334 	if (ret)
335 		return ret;
336 
337 	return lm3697_init(led);
338 }
339 
340 static int lm3697_remove(struct i2c_client *client)
341 {
342 	struct lm3697 *led = i2c_get_clientdata(client);
343 	int ret;
344 
345 	ret = regmap_update_bits(led->regmap, LM3697_CTRL_ENABLE,
346 				 LM3697_CTRL_A_B_EN, 0);
347 	if (ret) {
348 		dev_err(&led->client->dev, "Failed to disable the device\n");
349 		return ret;
350 	}
351 
352 	if (led->enable_gpio)
353 		gpiod_direction_output(led->enable_gpio, 0);
354 
355 	if (led->regulator) {
356 		ret = regulator_disable(led->regulator);
357 		if (ret)
358 			dev_err(&led->client->dev,
359 				"Failed to disable regulator\n");
360 	}
361 
362 	mutex_destroy(&led->lock);
363 
364 	return 0;
365 }
366 
367 static const struct i2c_device_id lm3697_id[] = {
368 	{ "lm3697", 0 },
369 	{ }
370 };
371 MODULE_DEVICE_TABLE(i2c, lm3697_id);
372 
373 static const struct of_device_id of_lm3697_leds_match[] = {
374 	{ .compatible = "ti,lm3697", },
375 	{},
376 };
377 MODULE_DEVICE_TABLE(of, of_lm3697_leds_match);
378 
379 static struct i2c_driver lm3697_driver = {
380 	.driver = {
381 		.name	= "lm3697",
382 		.of_match_table = of_lm3697_leds_match,
383 	},
384 	.probe		= lm3697_probe,
385 	.remove		= lm3697_remove,
386 	.id_table	= lm3697_id,
387 };
388 module_i2c_driver(lm3697_driver);
389 
390 MODULE_DESCRIPTION("Texas Instruments LM3697 LED driver");
391 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
392 MODULE_LICENSE("GPL v2");
393