xref: /openbmc/linux/drivers/leds/leds-aw2013.c (revision 078b39c9)
1 // SPDX-License-Identifier: GPL-2.0+
2 // Driver for Awinic AW2013 3-channel LED driver
3 
4 #include <linux/i2c.h>
5 #include <linux/leds.h>
6 #include <linux/module.h>
7 #include <linux/regulator/consumer.h>
8 #include <linux/mutex.h>
9 #include <linux/of.h>
10 #include <linux/regmap.h>
11 
12 #define AW2013_MAX_LEDS 3
13 
14 /* Reset and ID register */
15 #define AW2013_RSTR 0x00
16 #define AW2013_RSTR_RESET 0x55
17 #define AW2013_RSTR_CHIP_ID 0x33
18 
19 /* Global control register */
20 #define AW2013_GCR 0x01
21 #define AW2013_GCR_ENABLE BIT(0)
22 
23 /* LED channel enable register */
24 #define AW2013_LCTR 0x30
25 #define AW2013_LCTR_LE(x) BIT((x))
26 
27 /* LED channel control registers */
28 #define AW2013_LCFG(x) (0x31 + (x))
29 #define AW2013_LCFG_IMAX_MASK (BIT(0) | BIT(1)) // Should be 0-3
30 #define AW2013_LCFG_MD BIT(4)
31 #define AW2013_LCFG_FI BIT(5)
32 #define AW2013_LCFG_FO BIT(6)
33 
34 /* LED channel PWM registers */
35 #define AW2013_REG_PWM(x) (0x34 + (x))
36 
37 /* LED channel timing registers */
38 #define AW2013_LEDT0(x) (0x37 + (x) * 3)
39 #define AW2013_LEDT0_T1(x) ((x) << 4) // Should be 0-7
40 #define AW2013_LEDT0_T2(x) (x) // Should be 0-5
41 
42 #define AW2013_LEDT1(x) (0x38 + (x) * 3)
43 #define AW2013_LEDT1_T3(x) ((x) << 4) // Should be 0-7
44 #define AW2013_LEDT1_T4(x) (x) // Should be 0-7
45 
46 #define AW2013_LEDT2(x) (0x39 + (x) * 3)
47 #define AW2013_LEDT2_T0(x) ((x) << 4) // Should be 0-8
48 #define AW2013_LEDT2_REPEAT(x) (x) // Should be 0-15
49 
50 #define AW2013_REG_MAX 0x77
51 
52 #define AW2013_TIME_STEP 130 /* ms */
53 
54 struct aw2013;
55 
56 struct aw2013_led {
57 	struct aw2013 *chip;
58 	struct led_classdev cdev;
59 	u32 num;
60 	unsigned int imax;
61 };
62 
63 struct aw2013 {
64 	struct mutex mutex; /* held when writing to registers */
65 	struct regulator *vcc_regulator;
66 	struct i2c_client *client;
67 	struct aw2013_led leds[AW2013_MAX_LEDS];
68 	struct regmap *regmap;
69 	int num_leds;
70 	bool enabled;
71 };
72 
73 static int aw2013_chip_init(struct aw2013 *chip)
74 {
75 	int i, ret;
76 
77 	ret = regmap_write(chip->regmap, AW2013_GCR, AW2013_GCR_ENABLE);
78 	if (ret) {
79 		dev_err(&chip->client->dev, "Failed to enable the chip: %d\n",
80 			ret);
81 		return ret;
82 	}
83 
84 	for (i = 0; i < chip->num_leds; i++) {
85 		ret = regmap_update_bits(chip->regmap,
86 					 AW2013_LCFG(chip->leds[i].num),
87 					 AW2013_LCFG_IMAX_MASK,
88 					 chip->leds[i].imax);
89 		if (ret) {
90 			dev_err(&chip->client->dev,
91 				"Failed to set maximum current for led %d: %d\n",
92 				chip->leds[i].num, ret);
93 			return ret;
94 		}
95 	}
96 
97 	return ret;
98 }
99 
100 static void aw2013_chip_disable(struct aw2013 *chip)
101 {
102 	int ret;
103 
104 	if (!chip->enabled)
105 		return;
106 
107 	regmap_write(chip->regmap, AW2013_GCR, 0);
108 
109 	ret = regulator_disable(chip->vcc_regulator);
110 	if (ret) {
111 		dev_err(&chip->client->dev,
112 			"Failed to disable regulator: %d\n", ret);
113 		return;
114 	}
115 
116 	chip->enabled = false;
117 }
118 
119 static int aw2013_chip_enable(struct aw2013 *chip)
120 {
121 	int ret;
122 
123 	if (chip->enabled)
124 		return 0;
125 
126 	ret = regulator_enable(chip->vcc_regulator);
127 	if (ret) {
128 		dev_err(&chip->client->dev,
129 			"Failed to enable regulator: %d\n", ret);
130 		return ret;
131 	}
132 	chip->enabled = true;
133 
134 	ret = aw2013_chip_init(chip);
135 	if (ret)
136 		aw2013_chip_disable(chip);
137 
138 	return ret;
139 }
140 
141 static bool aw2013_chip_in_use(struct aw2013 *chip)
142 {
143 	int i;
144 
145 	for (i = 0; i < chip->num_leds; i++)
146 		if (chip->leds[i].cdev.brightness)
147 			return true;
148 
149 	return false;
150 }
151 
152 static int aw2013_brightness_set(struct led_classdev *cdev,
153 				 enum led_brightness brightness)
154 {
155 	struct aw2013_led *led = container_of(cdev, struct aw2013_led, cdev);
156 	int ret, num;
157 
158 	mutex_lock(&led->chip->mutex);
159 
160 	if (aw2013_chip_in_use(led->chip)) {
161 		ret = aw2013_chip_enable(led->chip);
162 		if (ret)
163 			goto error;
164 	}
165 
166 	num = led->num;
167 
168 	ret = regmap_write(led->chip->regmap, AW2013_REG_PWM(num), brightness);
169 	if (ret)
170 		goto error;
171 
172 	if (brightness) {
173 		ret = regmap_update_bits(led->chip->regmap, AW2013_LCTR,
174 					 AW2013_LCTR_LE(num), 0xFF);
175 	} else {
176 		ret = regmap_update_bits(led->chip->regmap, AW2013_LCTR,
177 					 AW2013_LCTR_LE(num), 0);
178 		if (ret)
179 			goto error;
180 		ret = regmap_update_bits(led->chip->regmap, AW2013_LCFG(num),
181 					 AW2013_LCFG_MD, 0);
182 	}
183 	if (ret)
184 		goto error;
185 
186 	if (!aw2013_chip_in_use(led->chip))
187 		aw2013_chip_disable(led->chip);
188 
189 error:
190 	mutex_unlock(&led->chip->mutex);
191 
192 	return ret;
193 }
194 
195 static int aw2013_blink_set(struct led_classdev *cdev,
196 			    unsigned long *delay_on, unsigned long *delay_off)
197 {
198 	struct aw2013_led *led = container_of(cdev, struct aw2013_led, cdev);
199 	int ret, num = led->num;
200 	unsigned long off = 0, on = 0;
201 
202 	/* If no blink specified, default to 1 Hz. */
203 	if (!*delay_off && !*delay_on) {
204 		*delay_off = 500;
205 		*delay_on = 500;
206 	}
207 
208 	if (!led->cdev.brightness) {
209 		led->cdev.brightness = LED_FULL;
210 		ret = aw2013_brightness_set(&led->cdev, led->cdev.brightness);
211 		if (ret)
212 			return ret;
213 	}
214 
215 	/* Never on - just set to off */
216 	if (!*delay_on) {
217 		led->cdev.brightness = LED_OFF;
218 		return aw2013_brightness_set(&led->cdev, LED_OFF);
219 	}
220 
221 	mutex_lock(&led->chip->mutex);
222 
223 	/* Never off - brightness is already set, disable blinking */
224 	if (!*delay_off) {
225 		ret = regmap_update_bits(led->chip->regmap, AW2013_LCFG(num),
226 					 AW2013_LCFG_MD, 0);
227 		goto out;
228 	}
229 
230 	/* Convert into values the HW will understand. */
231 	off = min(5, ilog2((*delay_off - 1) / AW2013_TIME_STEP) + 1);
232 	on = min(7, ilog2((*delay_on - 1) / AW2013_TIME_STEP) + 1);
233 
234 	*delay_off = BIT(off) * AW2013_TIME_STEP;
235 	*delay_on = BIT(on) * AW2013_TIME_STEP;
236 
237 	/* Set timings */
238 	ret = regmap_write(led->chip->regmap,
239 			   AW2013_LEDT0(num), AW2013_LEDT0_T2(on));
240 	if (ret)
241 		goto out;
242 	ret = regmap_write(led->chip->regmap,
243 			   AW2013_LEDT1(num), AW2013_LEDT1_T4(off));
244 	if (ret)
245 		goto out;
246 
247 	/* Finally, enable the LED */
248 	ret = regmap_update_bits(led->chip->regmap, AW2013_LCFG(num),
249 				 AW2013_LCFG_MD, 0xFF);
250 	if (ret)
251 		goto out;
252 
253 	ret = regmap_update_bits(led->chip->regmap, AW2013_LCTR,
254 				 AW2013_LCTR_LE(num), 0xFF);
255 
256 out:
257 	mutex_unlock(&led->chip->mutex);
258 
259 	return ret;
260 }
261 
262 static int aw2013_probe_dt(struct aw2013 *chip)
263 {
264 	struct device_node *np = dev_of_node(&chip->client->dev), *child;
265 	int count, ret = 0, i = 0;
266 	struct aw2013_led *led;
267 
268 	count = of_get_available_child_count(np);
269 	if (!count || count > AW2013_MAX_LEDS)
270 		return -EINVAL;
271 
272 	regmap_write(chip->regmap, AW2013_RSTR, AW2013_RSTR_RESET);
273 
274 	for_each_available_child_of_node(np, child) {
275 		struct led_init_data init_data = {};
276 		u32 source;
277 		u32 imax;
278 
279 		ret = of_property_read_u32(child, "reg", &source);
280 		if (ret != 0 || source >= AW2013_MAX_LEDS) {
281 			dev_err(&chip->client->dev,
282 				"Couldn't read LED address: %d\n", ret);
283 			count--;
284 			continue;
285 		}
286 
287 		led = &chip->leds[i];
288 		led->num = source;
289 		led->chip = chip;
290 		init_data.fwnode = of_fwnode_handle(child);
291 
292 		if (!of_property_read_u32(child, "led-max-microamp", &imax)) {
293 			led->imax = min_t(u32, imax / 5000, 3);
294 		} else {
295 			led->imax = 1; // 5mA
296 			dev_info(&chip->client->dev,
297 				 "DT property led-max-microamp is missing\n");
298 		}
299 
300 		led->cdev.brightness_set_blocking = aw2013_brightness_set;
301 		led->cdev.blink_set = aw2013_blink_set;
302 
303 		ret = devm_led_classdev_register_ext(&chip->client->dev,
304 						     &led->cdev, &init_data);
305 		if (ret < 0) {
306 			of_node_put(child);
307 			return ret;
308 		}
309 
310 		i++;
311 	}
312 
313 	if (!count)
314 		return -EINVAL;
315 
316 	chip->num_leds = i;
317 
318 	return 0;
319 }
320 
321 static const struct regmap_config aw2013_regmap_config = {
322 	.reg_bits = 8,
323 	.val_bits = 8,
324 	.max_register = AW2013_REG_MAX,
325 };
326 
327 static int aw2013_probe(struct i2c_client *client)
328 {
329 	struct aw2013 *chip;
330 	int ret;
331 	unsigned int chipid;
332 
333 	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
334 	if (!chip)
335 		return -ENOMEM;
336 
337 	mutex_init(&chip->mutex);
338 	mutex_lock(&chip->mutex);
339 
340 	chip->client = client;
341 	i2c_set_clientdata(client, chip);
342 
343 	chip->regmap = devm_regmap_init_i2c(client, &aw2013_regmap_config);
344 	if (IS_ERR(chip->regmap)) {
345 		ret = PTR_ERR(chip->regmap);
346 		dev_err(&client->dev, "Failed to allocate register map: %d\n",
347 			ret);
348 		goto error;
349 	}
350 
351 	chip->vcc_regulator = devm_regulator_get(&client->dev, "vcc");
352 	ret = PTR_ERR_OR_ZERO(chip->vcc_regulator);
353 	if (ret) {
354 		if (ret != -EPROBE_DEFER)
355 			dev_err(&client->dev,
356 				"Failed to request regulator: %d\n", ret);
357 		goto error;
358 	}
359 
360 	ret = regulator_enable(chip->vcc_regulator);
361 	if (ret) {
362 		dev_err(&client->dev,
363 			"Failed to enable regulator: %d\n", ret);
364 		goto error;
365 	}
366 
367 	ret = regmap_read(chip->regmap, AW2013_RSTR, &chipid);
368 	if (ret) {
369 		dev_err(&client->dev, "Failed to read chip ID: %d\n",
370 			ret);
371 		goto error_reg;
372 	}
373 
374 	if (chipid != AW2013_RSTR_CHIP_ID) {
375 		dev_err(&client->dev, "Chip reported wrong ID: %x\n",
376 			chipid);
377 		ret = -ENODEV;
378 		goto error_reg;
379 	}
380 
381 	ret = aw2013_probe_dt(chip);
382 	if (ret < 0)
383 		goto error_reg;
384 
385 	ret = regulator_disable(chip->vcc_regulator);
386 	if (ret) {
387 		dev_err(&client->dev,
388 			"Failed to disable regulator: %d\n", ret);
389 		goto error;
390 	}
391 
392 	mutex_unlock(&chip->mutex);
393 
394 	return 0;
395 
396 error_reg:
397 	regulator_disable(chip->vcc_regulator);
398 
399 error:
400 	mutex_destroy(&chip->mutex);
401 	return ret;
402 }
403 
404 static void aw2013_remove(struct i2c_client *client)
405 {
406 	struct aw2013 *chip = i2c_get_clientdata(client);
407 
408 	aw2013_chip_disable(chip);
409 
410 	mutex_destroy(&chip->mutex);
411 }
412 
413 static const struct of_device_id aw2013_match_table[] = {
414 	{ .compatible = "awinic,aw2013", },
415 	{ /* sentinel */ },
416 };
417 
418 MODULE_DEVICE_TABLE(of, aw2013_match_table);
419 
420 static struct i2c_driver aw2013_driver = {
421 	.driver = {
422 		.name = "leds-aw2013",
423 		.of_match_table = of_match_ptr(aw2013_match_table),
424 	},
425 	.probe = aw2013_probe,
426 	.remove = aw2013_remove,
427 };
428 
429 module_i2c_driver(aw2013_driver);
430 
431 MODULE_AUTHOR("Nikita Travkin <nikitos.tr@gmail.com>");
432 MODULE_DESCRIPTION("AW2013 LED driver");
433 MODULE_LICENSE("GPL v2");
434