1 /* 2 * Author Andreas Eversberg (jolly@eversberg.eu) 3 * Based on source code structure by 4 * Karsten Keil (keil@isdn4linux.de) 5 * 6 * This file is (c) under GNU PUBLIC LICENSE 7 * For changes and modifications please read 8 * ../../../Documentation/isdn/mISDN.cert 9 * 10 * Thanks to Karsten Keil (great drivers) 11 * Cologne Chip (great chips) 12 * 13 * This module does: 14 * Real-time tone generation 15 * DTMF detection 16 * Real-time cross-connection and conferrence 17 * Compensate jitter due to system load and hardware fault. 18 * All features are done in kernel space and will be realized 19 * using hardware, if available and supported by chip set. 20 * Blowfish encryption/decryption 21 */ 22 23 /* STRUCTURE: 24 * 25 * The dsp module provides layer 2 for b-channels (64kbit). It provides 26 * transparent audio forwarding with special digital signal processing: 27 * 28 * - (1) generation of tones 29 * - (2) detection of dtmf tones 30 * - (3) crossconnecting and conferences (clocking) 31 * - (4) echo generation for delay test 32 * - (5) volume control 33 * - (6) disable receive data 34 * - (7) pipeline 35 * - (8) encryption/decryption 36 * 37 * Look: 38 * TX RX 39 * ------upper layer------ 40 * | ^ 41 * | |(6) 42 * v | 43 * +-----+-------------+-----+ 44 * |(3)(4) | 45 * | CMX | 46 * | | 47 * | +-------------+ 48 * | | ^ 49 * | | | 50 * |+---------+| +----+----+ 51 * ||(1) || |(2) | 52 * || || | | 53 * || Tones || | DTMF | 54 * || || | | 55 * || || | | 56 * |+----+----+| +----+----+ 57 * +-----+-----+ ^ 58 * | | 59 * v | 60 * +----+----+ +----+----+ 61 * |(5) | |(5) | 62 * | | | | 63 * |TX Volume| |RX Volume| 64 * | | | | 65 * | | | | 66 * +----+----+ +----+----+ 67 * | ^ 68 * | | 69 * v | 70 * +----+-------------+----+ 71 * |(7) | 72 * | | 73 * | Pipeline Processing | 74 * | | 75 * | | 76 * +----+-------------+----+ 77 * | ^ 78 * | | 79 * v | 80 * +----+----+ +----+----+ 81 * |(8) | |(8) | 82 * | | | | 83 * | Encrypt | | Decrypt | 84 * | | | | 85 * | | | | 86 * +----+----+ +----+----+ 87 * | ^ 88 * | | 89 * v | 90 * ------card layer------ 91 * TX RX 92 * 93 * Above you can see the logical data flow. If software is used to do the 94 * process, it is actually the real data flow. If hardware is used, data 95 * may not flow, but hardware commands to the card, to provide the data flow 96 * as shown. 97 * 98 * NOTE: The channel must be activated in order to make dsp work, even if 99 * no data flow to the upper layer is intended. Activation can be done 100 * after and before controlling the setting using PH_CONTROL requests. 101 * 102 * DTMF: Will be detected by hardware if possible. It is done before CMX 103 * processing. 104 * 105 * Tones: Will be generated via software if endless looped audio fifos are 106 * not supported by hardware. Tones will override all data from CMX. 107 * It is not required to join a conference to use tones at any time. 108 * 109 * CMX: Is transparent when not used. When it is used, it will do 110 * crossconnections and conferences via software if not possible through 111 * hardware. If hardware capability is available, hardware is used. 112 * 113 * Echo: Is generated by CMX and is used to check performance of hard and 114 * software CMX. 115 * 116 * The CMX has special functions for conferences with one, two and more 117 * members. It will allow different types of data flow. Receive and transmit 118 * data to/form upper layer may be switched on/off individually without losing 119 * features of CMX, Tones and DTMF. 120 * 121 * Echo Cancellation: Sometimes we like to cancel echo from the interface. 122 * Note that a VoIP call may not have echo caused by the IP phone. The echo 123 * is generated by the telephone line connected to it. Because the delay 124 * is high, it becomes an echo. RESULT: Echo Cachelation is required if 125 * both echo AND delay is applied to an interface. 126 * Remember that software CMX always generates a more or less delay. 127 * 128 * If all used features can be realized in hardware, and if transmit and/or 129 * receive data ist disabled, the card may not send/receive any data at all. 130 * Not receiving is useful if only announcements are played. Not sending is 131 * useful if an answering machine records audio. Not sending and receiving is 132 * useful during most states of the call. If supported by hardware, tones 133 * will be played without cpu load. Small PBXs and NT-Mode applications will 134 * not need expensive hardware when processing calls. 135 * 136 * 137 * LOCKING: 138 * 139 * When data is received from upper or lower layer (card), the complete dsp 140 * module is locked by a global lock. This lock MUST lock irq, because it 141 * must lock timer events by DSP poll timer. 142 * When data is ready to be transmitted down, the data is queued and sent 143 * outside lock and timer event. 144 * PH_CONTROL must not change any settings, join or split conference members 145 * during process of data. 146 * 147 * HDLC: 148 * 149 * It works quite the same as transparent, except that HDLC data is forwarded 150 * to all other conference members if no hardware bridging is possible. 151 * Send data will be writte to sendq. Sendq will be sent if confirm is received. 152 * Conference cannot join, if one member is not hdlc. 153 * 154 */ 155 156 #include <linux/delay.h> 157 #include <linux/gfp.h> 158 #include <linux/mISDNif.h> 159 #include <linux/mISDNdsp.h> 160 #include <linux/module.h> 161 #include <linux/vmalloc.h> 162 #include "core.h" 163 #include "dsp.h" 164 165 static const char *mISDN_dsp_revision = "2.0"; 166 167 static int debug; 168 static int options; 169 static int poll; 170 static int dtmfthreshold = 100; 171 172 MODULE_AUTHOR("Andreas Eversberg"); 173 module_param(debug, uint, S_IRUGO | S_IWUSR); 174 module_param(options, uint, S_IRUGO | S_IWUSR); 175 module_param(poll, uint, S_IRUGO | S_IWUSR); 176 module_param(dtmfthreshold, uint, S_IRUGO | S_IWUSR); 177 MODULE_LICENSE("GPL"); 178 179 /*int spinnest = 0;*/ 180 181 spinlock_t dsp_lock; /* global dsp lock */ 182 struct list_head dsp_ilist; 183 struct list_head conf_ilist; 184 int dsp_debug; 185 int dsp_options; 186 int dsp_poll, dsp_tics; 187 188 /* check if rx may be turned off or must be turned on */ 189 static void 190 dsp_rx_off_member(struct dsp *dsp) 191 { 192 struct mISDN_ctrl_req cq; 193 int rx_off = 1; 194 195 memset(&cq, 0, sizeof(cq)); 196 197 if (!dsp->features_rx_off) 198 return; 199 200 /* not disabled */ 201 if (!dsp->rx_disabled) 202 rx_off = 0; 203 /* software dtmf */ 204 else if (dsp->dtmf.software) 205 rx_off = 0; 206 /* echo in software */ 207 else if (dsp->echo.software) 208 rx_off = 0; 209 /* bridge in software */ 210 else if (dsp->conf && dsp->conf->software) 211 rx_off = 0; 212 /* data is not required by user space and not required 213 * for echo dtmf detection, soft-echo, soft-bridging */ 214 215 if (rx_off == dsp->rx_is_off) 216 return; 217 218 if (!dsp->ch.peer) { 219 if (dsp_debug & DEBUG_DSP_CORE) 220 printk(KERN_DEBUG "%s: no peer, no rx_off\n", 221 __func__); 222 return; 223 } 224 cq.op = MISDN_CTRL_RX_OFF; 225 cq.p1 = rx_off; 226 if (dsp->ch.peer->ctrl(dsp->ch.peer, CONTROL_CHANNEL, &cq)) { 227 printk(KERN_DEBUG "%s: 2nd CONTROL_CHANNEL failed\n", 228 __func__); 229 return; 230 } 231 dsp->rx_is_off = rx_off; 232 if (dsp_debug & DEBUG_DSP_CORE) 233 printk(KERN_DEBUG "%s: %s set rx_off = %d\n", 234 __func__, dsp->name, rx_off); 235 } 236 static void 237 dsp_rx_off(struct dsp *dsp) 238 { 239 struct dsp_conf_member *member; 240 241 if (dsp_options & DSP_OPT_NOHARDWARE) 242 return; 243 244 /* no conf */ 245 if (!dsp->conf) { 246 dsp_rx_off_member(dsp); 247 return; 248 } 249 /* check all members in conf */ 250 list_for_each_entry(member, &dsp->conf->mlist, list) { 251 dsp_rx_off_member(member->dsp); 252 } 253 } 254 255 /* enable "fill empty" feature */ 256 static void 257 dsp_fill_empty(struct dsp *dsp) 258 { 259 struct mISDN_ctrl_req cq; 260 261 memset(&cq, 0, sizeof(cq)); 262 263 if (!dsp->ch.peer) { 264 if (dsp_debug & DEBUG_DSP_CORE) 265 printk(KERN_DEBUG "%s: no peer, no fill_empty\n", 266 __func__); 267 return; 268 } 269 cq.op = MISDN_CTRL_FILL_EMPTY; 270 cq.p1 = 1; 271 cq.p2 = dsp_silence; 272 if (dsp->ch.peer->ctrl(dsp->ch.peer, CONTROL_CHANNEL, &cq)) { 273 printk(KERN_DEBUG "%s: CONTROL_CHANNEL failed\n", 274 __func__); 275 return; 276 } 277 if (dsp_debug & DEBUG_DSP_CORE) 278 printk(KERN_DEBUG "%s: %s set fill_empty = 1\n", 279 __func__, dsp->name); 280 } 281 282 static int 283 dsp_control_req(struct dsp *dsp, struct mISDNhead *hh, struct sk_buff *skb) 284 { 285 struct sk_buff *nskb; 286 int ret = 0; 287 int cont; 288 u8 *data; 289 int len; 290 291 if (skb->len < sizeof(int)) { 292 printk(KERN_ERR "%s: PH_CONTROL message too short\n", __func__); 293 return -EINVAL; 294 } 295 cont = *((int *)skb->data); 296 len = skb->len - sizeof(int); 297 data = skb->data + sizeof(int); 298 299 switch (cont) { 300 case DTMF_TONE_START: /* turn on DTMF */ 301 if (dsp->hdlc) { 302 ret = -EINVAL; 303 break; 304 } 305 if (dsp_debug & DEBUG_DSP_CORE) 306 printk(KERN_DEBUG "%s: start dtmf\n", __func__); 307 if (len == sizeof(int)) { 308 if (dsp_debug & DEBUG_DSP_CORE) 309 printk(KERN_NOTICE "changing DTMF Threshold " 310 "to %d\n", *((int *)data)); 311 dsp->dtmf.treshold = (*(int *)data) * 10000; 312 } 313 dsp->dtmf.enable = 1; 314 /* init goertzel */ 315 dsp_dtmf_goertzel_init(dsp); 316 317 /* check dtmf hardware */ 318 dsp_dtmf_hardware(dsp); 319 dsp_rx_off(dsp); 320 break; 321 case DTMF_TONE_STOP: /* turn off DTMF */ 322 if (dsp_debug & DEBUG_DSP_CORE) 323 printk(KERN_DEBUG "%s: stop dtmf\n", __func__); 324 dsp->dtmf.enable = 0; 325 dsp->dtmf.hardware = 0; 326 dsp->dtmf.software = 0; 327 break; 328 case DSP_CONF_JOIN: /* join / update conference */ 329 if (len < sizeof(int)) { 330 ret = -EINVAL; 331 break; 332 } 333 if (*((u32 *)data) == 0) 334 goto conf_split; 335 if (dsp_debug & DEBUG_DSP_CORE) 336 printk(KERN_DEBUG "%s: join conference %d\n", 337 __func__, *((u32 *)data)); 338 ret = dsp_cmx_conf(dsp, *((u32 *)data)); 339 /* dsp_cmx_hardware will also be called here */ 340 dsp_rx_off(dsp); 341 if (dsp_debug & DEBUG_DSP_CMX) 342 dsp_cmx_debug(dsp); 343 break; 344 case DSP_CONF_SPLIT: /* remove from conference */ 345 conf_split: 346 if (dsp_debug & DEBUG_DSP_CORE) 347 printk(KERN_DEBUG "%s: release conference\n", __func__); 348 ret = dsp_cmx_conf(dsp, 0); 349 /* dsp_cmx_hardware will also be called here */ 350 if (dsp_debug & DEBUG_DSP_CMX) 351 dsp_cmx_debug(dsp); 352 dsp_rx_off(dsp); 353 break; 354 case DSP_TONE_PATT_ON: /* play tone */ 355 if (dsp->hdlc) { 356 ret = -EINVAL; 357 break; 358 } 359 if (len < sizeof(int)) { 360 ret = -EINVAL; 361 break; 362 } 363 if (dsp_debug & DEBUG_DSP_CORE) 364 printk(KERN_DEBUG "%s: turn tone 0x%x on\n", 365 __func__, *((int *)skb->data)); 366 ret = dsp_tone(dsp, *((int *)data)); 367 if (!ret) { 368 dsp_cmx_hardware(dsp->conf, dsp); 369 dsp_rx_off(dsp); 370 } 371 if (!dsp->tone.tone) 372 goto tone_off; 373 break; 374 case DSP_TONE_PATT_OFF: /* stop tone */ 375 if (dsp->hdlc) { 376 ret = -EINVAL; 377 break; 378 } 379 if (dsp_debug & DEBUG_DSP_CORE) 380 printk(KERN_DEBUG "%s: turn tone off\n", __func__); 381 dsp_tone(dsp, 0); 382 dsp_cmx_hardware(dsp->conf, dsp); 383 dsp_rx_off(dsp); 384 /* reset tx buffers (user space data) */ 385 tone_off: 386 dsp->rx_W = 0; 387 dsp->rx_R = 0; 388 break; 389 case DSP_VOL_CHANGE_TX: /* change volume */ 390 if (dsp->hdlc) { 391 ret = -EINVAL; 392 break; 393 } 394 if (len < sizeof(int)) { 395 ret = -EINVAL; 396 break; 397 } 398 dsp->tx_volume = *((int *)data); 399 if (dsp_debug & DEBUG_DSP_CORE) 400 printk(KERN_DEBUG "%s: change tx vol to %d\n", 401 __func__, dsp->tx_volume); 402 dsp_cmx_hardware(dsp->conf, dsp); 403 dsp_dtmf_hardware(dsp); 404 dsp_rx_off(dsp); 405 break; 406 case DSP_VOL_CHANGE_RX: /* change volume */ 407 if (dsp->hdlc) { 408 ret = -EINVAL; 409 break; 410 } 411 if (len < sizeof(int)) { 412 ret = -EINVAL; 413 break; 414 } 415 dsp->rx_volume = *((int *)data); 416 if (dsp_debug & DEBUG_DSP_CORE) 417 printk(KERN_DEBUG "%s: change rx vol to %d\n", 418 __func__, dsp->tx_volume); 419 dsp_cmx_hardware(dsp->conf, dsp); 420 dsp_dtmf_hardware(dsp); 421 dsp_rx_off(dsp); 422 break; 423 case DSP_ECHO_ON: /* enable echo */ 424 dsp->echo.software = 1; /* soft echo */ 425 if (dsp_debug & DEBUG_DSP_CORE) 426 printk(KERN_DEBUG "%s: enable cmx-echo\n", __func__); 427 dsp_cmx_hardware(dsp->conf, dsp); 428 dsp_rx_off(dsp); 429 if (dsp_debug & DEBUG_DSP_CMX) 430 dsp_cmx_debug(dsp); 431 break; 432 case DSP_ECHO_OFF: /* disable echo */ 433 dsp->echo.software = 0; 434 dsp->echo.hardware = 0; 435 if (dsp_debug & DEBUG_DSP_CORE) 436 printk(KERN_DEBUG "%s: disable cmx-echo\n", __func__); 437 dsp_cmx_hardware(dsp->conf, dsp); 438 dsp_rx_off(dsp); 439 if (dsp_debug & DEBUG_DSP_CMX) 440 dsp_cmx_debug(dsp); 441 break; 442 case DSP_RECEIVE_ON: /* enable receive to user space */ 443 if (dsp_debug & DEBUG_DSP_CORE) 444 printk(KERN_DEBUG "%s: enable receive to user " 445 "space\n", __func__); 446 dsp->rx_disabled = 0; 447 dsp_rx_off(dsp); 448 break; 449 case DSP_RECEIVE_OFF: /* disable receive to user space */ 450 if (dsp_debug & DEBUG_DSP_CORE) 451 printk(KERN_DEBUG "%s: disable receive to " 452 "user space\n", __func__); 453 dsp->rx_disabled = 1; 454 dsp_rx_off(dsp); 455 break; 456 case DSP_MIX_ON: /* enable mixing of tx data */ 457 if (dsp->hdlc) { 458 ret = -EINVAL; 459 break; 460 } 461 if (dsp_debug & DEBUG_DSP_CORE) 462 printk(KERN_DEBUG "%s: enable mixing of " 463 "tx-data with conf members\n", __func__); 464 dsp->tx_mix = 1; 465 dsp_cmx_hardware(dsp->conf, dsp); 466 dsp_rx_off(dsp); 467 if (dsp_debug & DEBUG_DSP_CMX) 468 dsp_cmx_debug(dsp); 469 break; 470 case DSP_MIX_OFF: /* disable mixing of tx data */ 471 if (dsp->hdlc) { 472 ret = -EINVAL; 473 break; 474 } 475 if (dsp_debug & DEBUG_DSP_CORE) 476 printk(KERN_DEBUG "%s: disable mixing of " 477 "tx-data with conf members\n", __func__); 478 dsp->tx_mix = 0; 479 dsp_cmx_hardware(dsp->conf, dsp); 480 dsp_rx_off(dsp); 481 if (dsp_debug & DEBUG_DSP_CMX) 482 dsp_cmx_debug(dsp); 483 break; 484 case DSP_TXDATA_ON: /* enable txdata */ 485 dsp->tx_data = 1; 486 if (dsp_debug & DEBUG_DSP_CORE) 487 printk(KERN_DEBUG "%s: enable tx-data\n", __func__); 488 dsp_cmx_hardware(dsp->conf, dsp); 489 dsp_rx_off(dsp); 490 if (dsp_debug & DEBUG_DSP_CMX) 491 dsp_cmx_debug(dsp); 492 break; 493 case DSP_TXDATA_OFF: /* disable txdata */ 494 dsp->tx_data = 0; 495 if (dsp_debug & DEBUG_DSP_CORE) 496 printk(KERN_DEBUG "%s: disable tx-data\n", __func__); 497 dsp_cmx_hardware(dsp->conf, dsp); 498 dsp_rx_off(dsp); 499 if (dsp_debug & DEBUG_DSP_CMX) 500 dsp_cmx_debug(dsp); 501 break; 502 case DSP_DELAY: /* use delay algorithm instead of dynamic 503 jitter algorithm */ 504 if (dsp->hdlc) { 505 ret = -EINVAL; 506 break; 507 } 508 if (len < sizeof(int)) { 509 ret = -EINVAL; 510 break; 511 } 512 dsp->cmx_delay = (*((int *)data)) << 3; 513 /* milliseconds to samples */ 514 if (dsp->cmx_delay >= (CMX_BUFF_HALF >> 1)) 515 /* clip to half of maximum usable buffer 516 (half of half buffer) */ 517 dsp->cmx_delay = (CMX_BUFF_HALF >> 1) - 1; 518 if (dsp_debug & DEBUG_DSP_CORE) 519 printk(KERN_DEBUG "%s: use delay algorithm to " 520 "compensate jitter (%d samples)\n", 521 __func__, dsp->cmx_delay); 522 break; 523 case DSP_JITTER: /* use dynamic jitter algorithm instead of 524 delay algorithm */ 525 if (dsp->hdlc) { 526 ret = -EINVAL; 527 break; 528 } 529 dsp->cmx_delay = 0; 530 if (dsp_debug & DEBUG_DSP_CORE) 531 printk(KERN_DEBUG "%s: use jitter algorithm to " 532 "compensate jitter\n", __func__); 533 break; 534 case DSP_TX_DEJITTER: /* use dynamic jitter algorithm for tx-buffer */ 535 if (dsp->hdlc) { 536 ret = -EINVAL; 537 break; 538 } 539 dsp->tx_dejitter = 1; 540 if (dsp_debug & DEBUG_DSP_CORE) 541 printk(KERN_DEBUG "%s: use dejitter on TX " 542 "buffer\n", __func__); 543 break; 544 case DSP_TX_DEJ_OFF: /* use tx-buffer without dejittering*/ 545 if (dsp->hdlc) { 546 ret = -EINVAL; 547 break; 548 } 549 dsp->tx_dejitter = 0; 550 if (dsp_debug & DEBUG_DSP_CORE) 551 printk(KERN_DEBUG "%s: use TX buffer without " 552 "dejittering\n", __func__); 553 break; 554 case DSP_PIPELINE_CFG: 555 if (dsp->hdlc) { 556 ret = -EINVAL; 557 break; 558 } 559 if (len > 0 && ((char *)data)[len - 1]) { 560 printk(KERN_DEBUG "%s: pipeline config string " 561 "is not NULL terminated!\n", __func__); 562 ret = -EINVAL; 563 } else { 564 dsp->pipeline.inuse = 1; 565 dsp_cmx_hardware(dsp->conf, dsp); 566 ret = dsp_pipeline_build(&dsp->pipeline, 567 len > 0 ? data : NULL); 568 dsp_cmx_hardware(dsp->conf, dsp); 569 dsp_rx_off(dsp); 570 } 571 break; 572 case DSP_BF_ENABLE_KEY: /* turn blowfish on */ 573 if (dsp->hdlc) { 574 ret = -EINVAL; 575 break; 576 } 577 if (len < 4 || len > 56) { 578 ret = -EINVAL; 579 break; 580 } 581 if (dsp_debug & DEBUG_DSP_CORE) 582 printk(KERN_DEBUG "%s: turn blowfish on (key " 583 "not shown)\n", __func__); 584 ret = dsp_bf_init(dsp, (u8 *)data, len); 585 /* set new cont */ 586 if (!ret) 587 cont = DSP_BF_ACCEPT; 588 else 589 cont = DSP_BF_REJECT; 590 /* send indication if it worked to set it */ 591 nskb = _alloc_mISDN_skb(PH_CONTROL_IND, MISDN_ID_ANY, 592 sizeof(int), &cont, GFP_ATOMIC); 593 if (nskb) { 594 if (dsp->up) { 595 if (dsp->up->send(dsp->up, nskb)) 596 dev_kfree_skb(nskb); 597 } else 598 dev_kfree_skb(nskb); 599 } 600 if (!ret) { 601 dsp_cmx_hardware(dsp->conf, dsp); 602 dsp_dtmf_hardware(dsp); 603 dsp_rx_off(dsp); 604 } 605 break; 606 case DSP_BF_DISABLE: /* turn blowfish off */ 607 if (dsp->hdlc) { 608 ret = -EINVAL; 609 break; 610 } 611 if (dsp_debug & DEBUG_DSP_CORE) 612 printk(KERN_DEBUG "%s: turn blowfish off\n", __func__); 613 dsp_bf_cleanup(dsp); 614 dsp_cmx_hardware(dsp->conf, dsp); 615 dsp_dtmf_hardware(dsp); 616 dsp_rx_off(dsp); 617 break; 618 default: 619 if (dsp_debug & DEBUG_DSP_CORE) 620 printk(KERN_DEBUG "%s: ctrl req %x unhandled\n", 621 __func__, cont); 622 ret = -EINVAL; 623 } 624 return ret; 625 } 626 627 static void 628 get_features(struct mISDNchannel *ch) 629 { 630 struct dsp *dsp = container_of(ch, struct dsp, ch); 631 struct mISDN_ctrl_req cq; 632 633 if (!ch->peer) { 634 if (dsp_debug & DEBUG_DSP_CORE) 635 printk(KERN_DEBUG "%s: no peer, no features\n", 636 __func__); 637 return; 638 } 639 memset(&cq, 0, sizeof(cq)); 640 cq.op = MISDN_CTRL_GETOP; 641 if (ch->peer->ctrl(ch->peer, CONTROL_CHANNEL, &cq) < 0) { 642 printk(KERN_DEBUG "%s: CONTROL_CHANNEL failed\n", 643 __func__); 644 return; 645 } 646 if (cq.op & MISDN_CTRL_RX_OFF) 647 dsp->features_rx_off = 1; 648 if (cq.op & MISDN_CTRL_FILL_EMPTY) 649 dsp->features_fill_empty = 1; 650 if (dsp_options & DSP_OPT_NOHARDWARE) 651 return; 652 if ((cq.op & MISDN_CTRL_HW_FEATURES_OP)) { 653 cq.op = MISDN_CTRL_HW_FEATURES; 654 *((u_long *)&cq.p1) = (u_long)&dsp->features; 655 if (ch->peer->ctrl(ch->peer, CONTROL_CHANNEL, &cq)) { 656 printk(KERN_DEBUG "%s: 2nd CONTROL_CHANNEL failed\n", 657 __func__); 658 } 659 } else 660 if (dsp_debug & DEBUG_DSP_CORE) 661 printk(KERN_DEBUG "%s: features not supported for %s\n", 662 __func__, dsp->name); 663 } 664 665 static int 666 dsp_function(struct mISDNchannel *ch, struct sk_buff *skb) 667 { 668 struct dsp *dsp = container_of(ch, struct dsp, ch); 669 struct mISDNhead *hh; 670 int ret = 0; 671 u8 *digits = NULL; 672 u_long flags; 673 674 hh = mISDN_HEAD_P(skb); 675 switch (hh->prim) { 676 /* FROM DOWN */ 677 case (PH_DATA_CNF): 678 dsp->data_pending = 0; 679 /* trigger next hdlc frame, if any */ 680 if (dsp->hdlc) { 681 spin_lock_irqsave(&dsp_lock, flags); 682 if (dsp->b_active) 683 schedule_work(&dsp->workq); 684 spin_unlock_irqrestore(&dsp_lock, flags); 685 } 686 break; 687 case (PH_DATA_IND): 688 case (DL_DATA_IND): 689 if (skb->len < 1) { 690 ret = -EINVAL; 691 break; 692 } 693 if (dsp->rx_is_off) { 694 if (dsp_debug & DEBUG_DSP_CORE) 695 printk(KERN_DEBUG "%s: rx-data during rx_off" 696 " for %s\n", 697 __func__, dsp->name); 698 } 699 if (dsp->hdlc) { 700 /* hdlc */ 701 spin_lock_irqsave(&dsp_lock, flags); 702 dsp_cmx_hdlc(dsp, skb); 703 spin_unlock_irqrestore(&dsp_lock, flags); 704 if (dsp->rx_disabled) { 705 /* if receive is not allowed */ 706 break; 707 } 708 hh->prim = DL_DATA_IND; 709 if (dsp->up) 710 return dsp->up->send(dsp->up, skb); 711 break; 712 } 713 714 spin_lock_irqsave(&dsp_lock, flags); 715 716 /* decrypt if enabled */ 717 if (dsp->bf_enable) 718 dsp_bf_decrypt(dsp, skb->data, skb->len); 719 /* pipeline */ 720 if (dsp->pipeline.inuse) 721 dsp_pipeline_process_rx(&dsp->pipeline, skb->data, 722 skb->len, hh->id); 723 /* change volume if requested */ 724 if (dsp->rx_volume) 725 dsp_change_volume(skb, dsp->rx_volume); 726 /* check if dtmf soft decoding is turned on */ 727 if (dsp->dtmf.software) { 728 digits = dsp_dtmf_goertzel_decode(dsp, skb->data, 729 skb->len, (dsp_options & DSP_OPT_ULAW) ? 1 : 0); 730 } 731 /* we need to process receive data if software */ 732 if (dsp->conf && dsp->conf->software) { 733 /* process data from card at cmx */ 734 dsp_cmx_receive(dsp, skb); 735 } 736 737 spin_unlock_irqrestore(&dsp_lock, flags); 738 739 /* send dtmf result, if any */ 740 if (digits) { 741 while (*digits) { 742 int k; 743 struct sk_buff *nskb; 744 if (dsp_debug & DEBUG_DSP_DTMF) 745 printk(KERN_DEBUG "%s: digit" 746 "(%c) to layer %s\n", 747 __func__, *digits, dsp->name); 748 k = *digits | DTMF_TONE_VAL; 749 nskb = _alloc_mISDN_skb(PH_CONTROL_IND, 750 MISDN_ID_ANY, sizeof(int), &k, 751 GFP_ATOMIC); 752 if (nskb) { 753 if (dsp->up) { 754 if (dsp->up->send( 755 dsp->up, nskb)) 756 dev_kfree_skb(nskb); 757 } else 758 dev_kfree_skb(nskb); 759 } 760 digits++; 761 } 762 } 763 if (dsp->rx_disabled) { 764 /* if receive is not allowed */ 765 break; 766 } 767 hh->prim = DL_DATA_IND; 768 if (dsp->up) 769 return dsp->up->send(dsp->up, skb); 770 break; 771 case (PH_CONTROL_IND): 772 if (dsp_debug & DEBUG_DSP_DTMFCOEFF) 773 printk(KERN_DEBUG "%s: PH_CONTROL INDICATION " 774 "received: %x (len %d) %s\n", __func__, 775 hh->id, skb->len, dsp->name); 776 switch (hh->id) { 777 case (DTMF_HFC_COEF): /* getting coefficients */ 778 if (!dsp->dtmf.hardware) { 779 if (dsp_debug & DEBUG_DSP_DTMFCOEFF) 780 printk(KERN_DEBUG "%s: ignoring DTMF " 781 "coefficients from HFC\n", 782 __func__); 783 break; 784 } 785 digits = dsp_dtmf_goertzel_decode(dsp, skb->data, 786 skb->len, 2); 787 while (*digits) { 788 int k; 789 struct sk_buff *nskb; 790 if (dsp_debug & DEBUG_DSP_DTMF) 791 printk(KERN_DEBUG "%s: digit" 792 "(%c) to layer %s\n", 793 __func__, *digits, dsp->name); 794 k = *digits | DTMF_TONE_VAL; 795 nskb = _alloc_mISDN_skb(PH_CONTROL_IND, 796 MISDN_ID_ANY, sizeof(int), &k, 797 GFP_ATOMIC); 798 if (nskb) { 799 if (dsp->up) { 800 if (dsp->up->send( 801 dsp->up, nskb)) 802 dev_kfree_skb(nskb); 803 } else 804 dev_kfree_skb(nskb); 805 } 806 digits++; 807 } 808 break; 809 case (HFC_VOL_CHANGE_TX): /* change volume */ 810 if (skb->len != sizeof(int)) { 811 ret = -EINVAL; 812 break; 813 } 814 spin_lock_irqsave(&dsp_lock, flags); 815 dsp->tx_volume = *((int *)skb->data); 816 if (dsp_debug & DEBUG_DSP_CORE) 817 printk(KERN_DEBUG "%s: change tx volume to " 818 "%d\n", __func__, dsp->tx_volume); 819 dsp_cmx_hardware(dsp->conf, dsp); 820 dsp_dtmf_hardware(dsp); 821 dsp_rx_off(dsp); 822 spin_unlock_irqrestore(&dsp_lock, flags); 823 break; 824 default: 825 if (dsp_debug & DEBUG_DSP_CORE) 826 printk(KERN_DEBUG "%s: ctrl ind %x unhandled " 827 "%s\n", __func__, hh->id, dsp->name); 828 ret = -EINVAL; 829 } 830 break; 831 case (PH_ACTIVATE_IND): 832 case (PH_ACTIVATE_CNF): 833 if (dsp_debug & DEBUG_DSP_CORE) 834 printk(KERN_DEBUG "%s: b_channel is now active %s\n", 835 __func__, dsp->name); 836 /* bchannel now active */ 837 spin_lock_irqsave(&dsp_lock, flags); 838 dsp->b_active = 1; 839 dsp->data_pending = 0; 840 dsp->rx_init = 1; 841 /* rx_W and rx_R will be adjusted on first frame */ 842 dsp->rx_W = 0; 843 dsp->rx_R = 0; 844 memset(dsp->rx_buff, 0, sizeof(dsp->rx_buff)); 845 dsp_cmx_hardware(dsp->conf, dsp); 846 dsp_dtmf_hardware(dsp); 847 dsp_rx_off(dsp); 848 spin_unlock_irqrestore(&dsp_lock, flags); 849 if (dsp_debug & DEBUG_DSP_CORE) 850 printk(KERN_DEBUG "%s: done with activation, sending " 851 "confirm to user space. %s\n", __func__, 852 dsp->name); 853 /* send activation to upper layer */ 854 hh->prim = DL_ESTABLISH_CNF; 855 if (dsp->up) 856 return dsp->up->send(dsp->up, skb); 857 break; 858 case (PH_DEACTIVATE_IND): 859 case (PH_DEACTIVATE_CNF): 860 if (dsp_debug & DEBUG_DSP_CORE) 861 printk(KERN_DEBUG "%s: b_channel is now inactive %s\n", 862 __func__, dsp->name); 863 /* bchannel now inactive */ 864 spin_lock_irqsave(&dsp_lock, flags); 865 dsp->b_active = 0; 866 dsp->data_pending = 0; 867 dsp_cmx_hardware(dsp->conf, dsp); 868 dsp_rx_off(dsp); 869 spin_unlock_irqrestore(&dsp_lock, flags); 870 hh->prim = DL_RELEASE_CNF; 871 if (dsp->up) 872 return dsp->up->send(dsp->up, skb); 873 break; 874 /* FROM UP */ 875 case (DL_DATA_REQ): 876 case (PH_DATA_REQ): 877 if (skb->len < 1) { 878 ret = -EINVAL; 879 break; 880 } 881 if (dsp->hdlc) { 882 /* hdlc */ 883 if (!dsp->b_active) { 884 ret = -EIO; 885 break; 886 } 887 hh->prim = PH_DATA_REQ; 888 spin_lock_irqsave(&dsp_lock, flags); 889 skb_queue_tail(&dsp->sendq, skb); 890 schedule_work(&dsp->workq); 891 spin_unlock_irqrestore(&dsp_lock, flags); 892 return 0; 893 } 894 /* send data to tx-buffer (if no tone is played) */ 895 if (!dsp->tone.tone) { 896 spin_lock_irqsave(&dsp_lock, flags); 897 dsp_cmx_transmit(dsp, skb); 898 spin_unlock_irqrestore(&dsp_lock, flags); 899 } 900 break; 901 case (PH_CONTROL_REQ): 902 spin_lock_irqsave(&dsp_lock, flags); 903 ret = dsp_control_req(dsp, hh, skb); 904 spin_unlock_irqrestore(&dsp_lock, flags); 905 break; 906 case (DL_ESTABLISH_REQ): 907 case (PH_ACTIVATE_REQ): 908 if (dsp_debug & DEBUG_DSP_CORE) 909 printk(KERN_DEBUG "%s: activating b_channel %s\n", 910 __func__, dsp->name); 911 if (dsp->dtmf.hardware || dsp->dtmf.software) 912 dsp_dtmf_goertzel_init(dsp); 913 get_features(ch); 914 /* enable fill_empty feature */ 915 if (dsp->features_fill_empty) 916 dsp_fill_empty(dsp); 917 /* send ph_activate */ 918 hh->prim = PH_ACTIVATE_REQ; 919 if (ch->peer) 920 return ch->recv(ch->peer, skb); 921 break; 922 case (DL_RELEASE_REQ): 923 case (PH_DEACTIVATE_REQ): 924 if (dsp_debug & DEBUG_DSP_CORE) 925 printk(KERN_DEBUG "%s: releasing b_channel %s\n", 926 __func__, dsp->name); 927 spin_lock_irqsave(&dsp_lock, flags); 928 dsp->tone.tone = 0; 929 dsp->tone.hardware = 0; 930 dsp->tone.software = 0; 931 if (timer_pending(&dsp->tone.tl)) 932 del_timer(&dsp->tone.tl); 933 if (dsp->conf) 934 dsp_cmx_conf(dsp, 0); /* dsp_cmx_hardware will also be 935 called here */ 936 skb_queue_purge(&dsp->sendq); 937 spin_unlock_irqrestore(&dsp_lock, flags); 938 hh->prim = PH_DEACTIVATE_REQ; 939 if (ch->peer) 940 return ch->recv(ch->peer, skb); 941 break; 942 default: 943 if (dsp_debug & DEBUG_DSP_CORE) 944 printk(KERN_DEBUG "%s: msg %x unhandled %s\n", 945 __func__, hh->prim, dsp->name); 946 ret = -EINVAL; 947 } 948 if (!ret) 949 dev_kfree_skb(skb); 950 return ret; 951 } 952 953 static int 954 dsp_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg) 955 { 956 struct dsp *dsp = container_of(ch, struct dsp, ch); 957 u_long flags; 958 int err = 0; 959 960 if (debug & DEBUG_DSP_CTRL) 961 printk(KERN_DEBUG "%s:(%x)\n", __func__, cmd); 962 963 switch (cmd) { 964 case OPEN_CHANNEL: 965 break; 966 case CLOSE_CHANNEL: 967 if (dsp->ch.peer) 968 dsp->ch.peer->ctrl(dsp->ch.peer, CLOSE_CHANNEL, NULL); 969 970 /* wait until workqueue has finished, 971 * must lock here, or we may hit send-process currently 972 * queueing. */ 973 spin_lock_irqsave(&dsp_lock, flags); 974 dsp->b_active = 0; 975 spin_unlock_irqrestore(&dsp_lock, flags); 976 /* MUST not be locked, because it waits until queue is done. */ 977 cancel_work_sync(&dsp->workq); 978 spin_lock_irqsave(&dsp_lock, flags); 979 if (timer_pending(&dsp->tone.tl)) 980 del_timer(&dsp->tone.tl); 981 skb_queue_purge(&dsp->sendq); 982 if (dsp_debug & DEBUG_DSP_CTRL) 983 printk(KERN_DEBUG "%s: releasing member %s\n", 984 __func__, dsp->name); 985 dsp->b_active = 0; 986 dsp_cmx_conf(dsp, 0); /* dsp_cmx_hardware will also be called 987 here */ 988 dsp_pipeline_destroy(&dsp->pipeline); 989 990 if (dsp_debug & DEBUG_DSP_CTRL) 991 printk(KERN_DEBUG "%s: remove & destroy object %s\n", 992 __func__, dsp->name); 993 list_del(&dsp->list); 994 spin_unlock_irqrestore(&dsp_lock, flags); 995 996 if (dsp_debug & DEBUG_DSP_CTRL) 997 printk(KERN_DEBUG "%s: dsp instance released\n", 998 __func__); 999 vfree(dsp); 1000 module_put(THIS_MODULE); 1001 break; 1002 } 1003 return err; 1004 } 1005 1006 static void 1007 dsp_send_bh(struct work_struct *work) 1008 { 1009 struct dsp *dsp = container_of(work, struct dsp, workq); 1010 struct sk_buff *skb; 1011 struct mISDNhead *hh; 1012 1013 if (dsp->hdlc && dsp->data_pending) 1014 return; /* wait until data has been acknowledged */ 1015 1016 /* send queued data */ 1017 while ((skb = skb_dequeue(&dsp->sendq))) { 1018 /* in locked date, we must have still data in queue */ 1019 if (dsp->data_pending) { 1020 if (dsp_debug & DEBUG_DSP_CORE) 1021 printk(KERN_DEBUG "%s: fifo full %s, this is " 1022 "no bug!\n", __func__, dsp->name); 1023 /* flush transparent data, if not acked */ 1024 dev_kfree_skb(skb); 1025 continue; 1026 } 1027 hh = mISDN_HEAD_P(skb); 1028 if (hh->prim == DL_DATA_REQ) { 1029 /* send packet up */ 1030 if (dsp->up) { 1031 if (dsp->up->send(dsp->up, skb)) 1032 dev_kfree_skb(skb); 1033 } else 1034 dev_kfree_skb(skb); 1035 } else { 1036 /* send packet down */ 1037 if (dsp->ch.peer) { 1038 dsp->data_pending = 1; 1039 if (dsp->ch.recv(dsp->ch.peer, skb)) { 1040 dev_kfree_skb(skb); 1041 dsp->data_pending = 0; 1042 } 1043 } else 1044 dev_kfree_skb(skb); 1045 } 1046 } 1047 } 1048 1049 static int 1050 dspcreate(struct channel_req *crq) 1051 { 1052 struct dsp *ndsp; 1053 u_long flags; 1054 1055 if (crq->protocol != ISDN_P_B_L2DSP 1056 && crq->protocol != ISDN_P_B_L2DSPHDLC) 1057 return -EPROTONOSUPPORT; 1058 ndsp = vzalloc(sizeof(struct dsp)); 1059 if (!ndsp) { 1060 printk(KERN_ERR "%s: vmalloc struct dsp failed\n", __func__); 1061 return -ENOMEM; 1062 } 1063 if (dsp_debug & DEBUG_DSP_CTRL) 1064 printk(KERN_DEBUG "%s: creating new dsp instance\n", __func__); 1065 1066 /* default enabled */ 1067 INIT_WORK(&ndsp->workq, (void *)dsp_send_bh); 1068 skb_queue_head_init(&ndsp->sendq); 1069 ndsp->ch.send = dsp_function; 1070 ndsp->ch.ctrl = dsp_ctrl; 1071 ndsp->up = crq->ch; 1072 crq->ch = &ndsp->ch; 1073 if (crq->protocol == ISDN_P_B_L2DSP) { 1074 crq->protocol = ISDN_P_B_RAW; 1075 ndsp->hdlc = 0; 1076 } else { 1077 crq->protocol = ISDN_P_B_HDLC; 1078 ndsp->hdlc = 1; 1079 } 1080 if (!try_module_get(THIS_MODULE)) 1081 printk(KERN_WARNING "%s:cannot get module\n", 1082 __func__); 1083 1084 sprintf(ndsp->name, "DSP_C%x(0x%p)", 1085 ndsp->up->st->dev->id + 1, ndsp); 1086 /* set frame size to start */ 1087 ndsp->features.hfc_id = -1; /* current PCM id */ 1088 ndsp->features.pcm_id = -1; /* current PCM id */ 1089 ndsp->pcm_slot_rx = -1; /* current CPM slot */ 1090 ndsp->pcm_slot_tx = -1; 1091 ndsp->pcm_bank_rx = -1; 1092 ndsp->pcm_bank_tx = -1; 1093 ndsp->hfc_conf = -1; /* current conference number */ 1094 /* set tone timer */ 1095 timer_setup(&ndsp->tone.tl, dsp_tone_timeout, 0); 1096 1097 if (dtmfthreshold < 20 || dtmfthreshold > 500) 1098 dtmfthreshold = 200; 1099 ndsp->dtmf.treshold = dtmfthreshold * 10000; 1100 1101 /* init pipeline append to list */ 1102 spin_lock_irqsave(&dsp_lock, flags); 1103 dsp_pipeline_init(&ndsp->pipeline); 1104 list_add_tail(&ndsp->list, &dsp_ilist); 1105 spin_unlock_irqrestore(&dsp_lock, flags); 1106 1107 return 0; 1108 } 1109 1110 1111 static struct Bprotocol DSP = { 1112 .Bprotocols = (1 << (ISDN_P_B_L2DSP & ISDN_P_B_MASK)) 1113 | (1 << (ISDN_P_B_L2DSPHDLC & ISDN_P_B_MASK)), 1114 .name = "dsp", 1115 .create = dspcreate 1116 }; 1117 1118 static int __init dsp_init(void) 1119 { 1120 int err; 1121 int tics; 1122 1123 printk(KERN_INFO "DSP module %s\n", mISDN_dsp_revision); 1124 1125 dsp_options = options; 1126 dsp_debug = debug; 1127 1128 /* set packet size */ 1129 dsp_poll = poll; 1130 if (dsp_poll) { 1131 if (dsp_poll > MAX_POLL) { 1132 printk(KERN_ERR "%s: Wrong poll value (%d), use %d " 1133 "maximum.\n", __func__, poll, MAX_POLL); 1134 err = -EINVAL; 1135 return err; 1136 } 1137 if (dsp_poll < 8) { 1138 printk(KERN_ERR "%s: Wrong poll value (%d), use 8 " 1139 "minimum.\n", __func__, dsp_poll); 1140 err = -EINVAL; 1141 return err; 1142 } 1143 dsp_tics = poll * HZ / 8000; 1144 if (dsp_tics * 8000 != poll * HZ) { 1145 printk(KERN_INFO "mISDN_dsp: Cannot clock every %d " 1146 "samples (0,125 ms). It is not a multiple of " 1147 "%d HZ.\n", poll, HZ); 1148 err = -EINVAL; 1149 return err; 1150 } 1151 } else { 1152 poll = 8; 1153 while (poll <= MAX_POLL) { 1154 tics = (poll * HZ) / 8000; 1155 if (tics * 8000 == poll * HZ) { 1156 dsp_tics = tics; 1157 dsp_poll = poll; 1158 if (poll >= 64) 1159 break; 1160 } 1161 poll++; 1162 } 1163 } 1164 if (dsp_poll == 0) { 1165 printk(KERN_INFO "mISDN_dsp: There is no multiple of kernel " 1166 "clock that equals exactly the duration of 8-256 " 1167 "samples. (Choose kernel clock speed like 100, 250, " 1168 "300, 1000)\n"); 1169 err = -EINVAL; 1170 return err; 1171 } 1172 printk(KERN_INFO "mISDN_dsp: DSP clocks every %d samples. This equals " 1173 "%d jiffies.\n", dsp_poll, dsp_tics); 1174 1175 spin_lock_init(&dsp_lock); 1176 INIT_LIST_HEAD(&dsp_ilist); 1177 INIT_LIST_HEAD(&conf_ilist); 1178 1179 /* init conversion tables */ 1180 dsp_audio_generate_law_tables(); 1181 dsp_silence = (dsp_options & DSP_OPT_ULAW) ? 0xff : 0x2a; 1182 dsp_audio_law_to_s32 = (dsp_options & DSP_OPT_ULAW) ? 1183 dsp_audio_ulaw_to_s32 : dsp_audio_alaw_to_s32; 1184 dsp_audio_generate_s2law_table(); 1185 dsp_audio_generate_seven(); 1186 dsp_audio_generate_mix_table(); 1187 if (dsp_options & DSP_OPT_ULAW) 1188 dsp_audio_generate_ulaw_samples(); 1189 dsp_audio_generate_volume_changes(); 1190 1191 err = dsp_pipeline_module_init(); 1192 if (err) { 1193 printk(KERN_ERR "mISDN_dsp: Can't initialize pipeline, " 1194 "error(%d)\n", err); 1195 return err; 1196 } 1197 1198 err = mISDN_register_Bprotocol(&DSP); 1199 if (err) { 1200 printk(KERN_ERR "Can't register %s error(%d)\n", DSP.name, err); 1201 return err; 1202 } 1203 1204 /* set sample timer */ 1205 timer_setup(&dsp_spl_tl, (void *)dsp_cmx_send, 0); 1206 dsp_spl_tl.expires = jiffies + dsp_tics; 1207 dsp_spl_jiffies = dsp_spl_tl.expires; 1208 add_timer(&dsp_spl_tl); 1209 1210 return 0; 1211 } 1212 1213 1214 static void __exit dsp_cleanup(void) 1215 { 1216 mISDN_unregister_Bprotocol(&DSP); 1217 1218 del_timer_sync(&dsp_spl_tl); 1219 1220 if (!list_empty(&dsp_ilist)) { 1221 printk(KERN_ERR "mISDN_dsp: Audio DSP object inst list not " 1222 "empty.\n"); 1223 } 1224 if (!list_empty(&conf_ilist)) { 1225 printk(KERN_ERR "mISDN_dsp: Conference list not empty. Not " 1226 "all memory freed.\n"); 1227 } 1228 1229 dsp_pipeline_module_exit(); 1230 } 1231 1232 module_init(dsp_init); 1233 module_exit(dsp_cleanup); 1234