1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * hfcsusb.h, HFC-S USB mISDN driver 4 */ 5 6 #ifndef __HFCSUSB_H__ 7 #define __HFCSUSB_H__ 8 9 10 #define DRIVER_NAME "HFC-S_USB" 11 12 #define DBG_HFC_CALL_TRACE 0x00010000 13 #define DBG_HFC_FIFO_VERBOSE 0x00020000 14 #define DBG_HFC_USB_VERBOSE 0x00100000 15 #define DBG_HFC_URB_INFO 0x00200000 16 #define DBG_HFC_URB_ERROR 0x00400000 17 18 #define DEFAULT_TRANSP_BURST_SZ 128 19 20 #define HFC_CTRL_TIMEOUT 20 /* 5ms timeout writing/reading regs */ 21 #define CLKDEL_TE 0x0f /* CLKDEL in TE mode */ 22 #define CLKDEL_NT 0x6c /* CLKDEL in NT mode */ 23 24 /* hfcsusb Layer1 commands */ 25 #define HFC_L1_ACTIVATE_TE 1 26 #define HFC_L1_ACTIVATE_NT 2 27 #define HFC_L1_DEACTIVATE_NT 3 28 #define HFC_L1_FORCE_DEACTIVATE_TE 4 29 30 /* cmd FLAGS in HFCUSB_STATES register */ 31 #define HFCUSB_LOAD_STATE 0x10 32 #define HFCUSB_ACTIVATE 0x20 33 #define HFCUSB_DO_ACTION 0x40 34 #define HFCUSB_NT_G2_G3 0x80 35 36 /* timers */ 37 #define NT_ACTIVATION_TIMER 0x01 /* enables NT mode activation Timer */ 38 #define NT_T1_COUNT 10 39 40 #define MAX_BCH_SIZE 2048 /* allowed B-channel packet size */ 41 42 #define HFCUSB_RX_THRESHOLD 64 /* threshold for fifo report bit rx */ 43 #define HFCUSB_TX_THRESHOLD 96 /* threshold for fifo report bit tx */ 44 45 #define HFCUSB_CHIP_ID 0x16 /* Chip ID register index */ 46 #define HFCUSB_CIRM 0x00 /* cirm register index */ 47 #define HFCUSB_USB_SIZE 0x07 /* int length register */ 48 #define HFCUSB_USB_SIZE_I 0x06 /* iso length register */ 49 #define HFCUSB_F_CROSS 0x0b /* bit order register */ 50 #define HFCUSB_CLKDEL 0x37 /* bit delay register */ 51 #define HFCUSB_CON_HDLC 0xfa /* channel connect register */ 52 #define HFCUSB_HDLC_PAR 0xfb 53 #define HFCUSB_SCTRL 0x31 /* S-bus control register (tx) */ 54 #define HFCUSB_SCTRL_E 0x32 /* same for E and special funcs */ 55 #define HFCUSB_SCTRL_R 0x33 /* S-bus control register (rx) */ 56 #define HFCUSB_F_THRES 0x0c /* threshold register */ 57 #define HFCUSB_FIFO 0x0f /* fifo select register */ 58 #define HFCUSB_F_USAGE 0x1a /* fifo usage register */ 59 #define HFCUSB_MST_MODE0 0x14 60 #define HFCUSB_MST_MODE1 0x15 61 #define HFCUSB_P_DATA 0x1f 62 #define HFCUSB_INC_RES_F 0x0e 63 #define HFCUSB_B1_SSL 0x20 64 #define HFCUSB_B2_SSL 0x21 65 #define HFCUSB_B1_RSL 0x24 66 #define HFCUSB_B2_RSL 0x25 67 #define HFCUSB_STATES 0x30 68 69 70 #define HFCUSB_CHIPID 0x40 /* ID value of HFC-S USB */ 71 72 /* fifo registers */ 73 #define HFCUSB_NUM_FIFOS 8 /* maximum number of fifos */ 74 #define HFCUSB_B1_TX 0 /* index for B1 transmit bulk/int */ 75 #define HFCUSB_B1_RX 1 /* index for B1 receive bulk/int */ 76 #define HFCUSB_B2_TX 2 77 #define HFCUSB_B2_RX 3 78 #define HFCUSB_D_TX 4 79 #define HFCUSB_D_RX 5 80 #define HFCUSB_PCM_TX 6 81 #define HFCUSB_PCM_RX 7 82 83 84 #define USB_INT 0 85 #define USB_BULK 1 86 #define USB_ISOC 2 87 88 #define ISOC_PACKETS_D 8 89 #define ISOC_PACKETS_B 8 90 #define ISO_BUFFER_SIZE 128 91 92 /* defines how much ISO packets are handled in one URB */ 93 static int iso_packets[8] = 94 { ISOC_PACKETS_B, ISOC_PACKETS_B, ISOC_PACKETS_B, ISOC_PACKETS_B, 95 ISOC_PACKETS_D, ISOC_PACKETS_D, ISOC_PACKETS_D, ISOC_PACKETS_D 96 }; 97 98 99 /* Fifo flow Control for TX ISO */ 100 #define SINK_MAX 68 101 #define SINK_MIN 48 102 #define SINK_DMIN 12 103 #define SINK_DMAX 18 104 #define BITLINE_INF (-96 * 8) 105 106 /* HFC-S USB register access by Control-URSs */ 107 #define write_reg_atomic(a, b, c) \ 108 usb_control_msg((a)->dev, (a)->ctrl_out_pipe, 0, 0x40, (c), (b), \ 109 0, 0, HFC_CTRL_TIMEOUT) 110 #define read_reg_atomic(a, b, c) \ 111 usb_control_msg((a)->dev, (a)->ctrl_in_pipe, 1, 0xC0, 0, (b), (c), \ 112 1, HFC_CTRL_TIMEOUT) 113 #define HFC_CTRL_BUFSIZE 64 114 115 struct ctrl_buf { 116 __u8 hfcs_reg; /* register number */ 117 __u8 reg_val; /* value to be written (or read) */ 118 }; 119 120 /* 121 * URB error codes 122 * Used to represent a list of values and their respective symbolic names 123 */ 124 struct hfcusb_symbolic_list { 125 const int num; 126 const char *name; 127 }; 128 129 static struct hfcusb_symbolic_list urb_errlist[] = { 130 {-ENOMEM, "No memory for allocation of internal structures"}, 131 {-ENOSPC, "The host controller's bandwidth is already consumed"}, 132 {-ENOENT, "URB was canceled by unlink_urb"}, 133 {-EXDEV, "ISO transfer only partially completed"}, 134 {-EAGAIN, "Too match scheduled for the future"}, 135 {-ENXIO, "URB already queued"}, 136 {-EFBIG, "Too much ISO frames requested"}, 137 {-ENOSR, "Buffer error (overrun)"}, 138 {-EPIPE, "Specified endpoint is stalled (device not responding)"}, 139 {-EOVERFLOW, "Babble (bad cable?)"}, 140 {-EPROTO, "Bit-stuff error (bad cable?)"}, 141 {-EILSEQ, "CRC/Timeout"}, 142 {-ETIMEDOUT, "NAK (device does not respond)"}, 143 {-ESHUTDOWN, "Device unplugged"}, 144 {-1, NULL} 145 }; 146 147 static inline const char * 148 symbolic(struct hfcusb_symbolic_list list[], const int num) 149 { 150 int i; 151 for (i = 0; list[i].name != NULL; i++) 152 if (list[i].num == num) 153 return list[i].name; 154 return "<unknown USB Error>"; 155 } 156 157 /* USB descriptor need to contain one of the following EndPoint combination: */ 158 #define CNF_4INT3ISO 1 /* 4 INT IN, 3 ISO OUT */ 159 #define CNF_3INT3ISO 2 /* 3 INT IN, 3 ISO OUT */ 160 #define CNF_4ISO3ISO 3 /* 4 ISO IN, 3 ISO OUT */ 161 #define CNF_3ISO3ISO 4 /* 3 ISO IN, 3 ISO OUT */ 162 163 #define EP_NUL 1 /* Endpoint at this position not allowed */ 164 #define EP_NOP 2 /* all type of endpoints allowed at this position */ 165 #define EP_ISO 3 /* Isochron endpoint mandatory at this position */ 166 #define EP_BLK 4 /* Bulk endpoint mandatory at this position */ 167 #define EP_INT 5 /* Interrupt endpoint mandatory at this position */ 168 169 #define HFC_CHAN_B1 0 170 #define HFC_CHAN_B2 1 171 #define HFC_CHAN_D 2 172 #define HFC_CHAN_E 3 173 174 175 /* 176 * List of all supported enpoints configiration sets, used to find the 177 * best matching endpoint configuration within a devices' USB descriptor. 178 * We need at least 3 RX endpoints, and 3 TX endpoints, either 179 * INT-in and ISO-out, or ISO-in and ISO-out) 180 * with 4 RX endpoints even E-Channel logging is possible 181 */ 182 static int 183 validconf[][19] = { 184 /* INT in, ISO out config */ 185 {EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NOP, EP_INT, 186 EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_NUL, EP_NUL, 187 CNF_4INT3ISO, 2, 1}, 188 {EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_NUL, 189 EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_NUL, EP_NUL, 190 CNF_3INT3ISO, 2, 0}, 191 /* ISO in, ISO out config */ 192 {EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, 193 EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_NOP, EP_ISO, 194 CNF_4ISO3ISO, 2, 1}, 195 {EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, 196 EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_NUL, EP_NUL, 197 CNF_3ISO3ISO, 2, 0}, 198 {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} /* EOL element */ 199 }; 200 201 /* string description of chosen config */ 202 static char *conf_str[] = { 203 "4 Interrupt IN + 3 Isochron OUT", 204 "3 Interrupt IN + 3 Isochron OUT", 205 "4 Isochron IN + 3 Isochron OUT", 206 "3 Isochron IN + 3 Isochron OUT" 207 }; 208 209 210 #define LED_OFF 0 /* no LED support */ 211 #define LED_SCHEME1 1 /* LED standard scheme */ 212 #define LED_SCHEME2 2 /* not used yet... */ 213 214 #define LED_POWER_ON 1 215 #define LED_POWER_OFF 2 216 #define LED_S0_ON 3 217 #define LED_S0_OFF 4 218 #define LED_B1_ON 5 219 #define LED_B1_OFF 6 220 #define LED_B1_DATA 7 221 #define LED_B2_ON 8 222 #define LED_B2_OFF 9 223 #define LED_B2_DATA 10 224 225 #define LED_NORMAL 0 /* LEDs are normal */ 226 #define LED_INVERTED 1 /* LEDs are inverted */ 227 228 /* time in ms to perform a Flashing LED when B-Channel has traffic */ 229 #define LED_TIME 250 230 231 232 233 struct hfcsusb; 234 struct usb_fifo; 235 236 /* structure defining input+output fifos (interrupt/bulk mode) */ 237 struct iso_urb { 238 struct urb *urb; 239 __u8 buffer[ISO_BUFFER_SIZE]; /* buffer rx/tx USB URB data */ 240 struct usb_fifo *owner_fifo; /* pointer to owner fifo */ 241 __u8 indx; /* Fifos's ISO double buffer 0 or 1 ? */ 242 #ifdef ISO_FRAME_START_DEBUG 243 int start_frames[ISO_FRAME_START_RING_COUNT]; 244 __u8 iso_frm_strt_pos; /* index in start_frame[] */ 245 #endif 246 }; 247 248 struct usb_fifo { 249 int fifonum; /* fifo index attached to this structure */ 250 int active; /* fifo is currently active */ 251 struct hfcsusb *hw; /* pointer to main structure */ 252 int pipe; /* address of endpoint */ 253 __u8 usb_packet_maxlen; /* maximum length for usb transfer */ 254 unsigned int max_size; /* maximum size of receive/send packet */ 255 __u8 intervall; /* interrupt interval */ 256 struct urb *urb; /* transfer structure for usb routines */ 257 __u8 buffer[128]; /* buffer USB INT OUT URB data */ 258 int bit_line; /* how much bits are in the fifo? */ 259 260 __u8 usb_transfer_mode; /* switched between ISO and INT */ 261 struct iso_urb iso[2]; /* two urbs to have one always 262 one pending */ 263 264 struct dchannel *dch; /* link to hfcsusb_t->dch */ 265 struct bchannel *bch; /* link to hfcsusb_t->bch */ 266 struct dchannel *ech; /* link to hfcsusb_t->ech, TODO: E-CHANNEL */ 267 int last_urblen; /* remember length of last packet */ 268 __u8 stop_gracefull; /* stops URB retransmission */ 269 }; 270 271 struct hfcsusb { 272 struct list_head list; 273 struct dchannel dch; 274 struct bchannel bch[2]; 275 struct dchannel ech; /* TODO : wait for struct echannel ;) */ 276 277 struct usb_device *dev; /* our device */ 278 struct usb_interface *intf; /* used interface */ 279 int if_used; /* used interface number */ 280 int alt_used; /* used alternate config */ 281 int cfg_used; /* configuration index used */ 282 int vend_idx; /* index in hfcsusb_idtab */ 283 int packet_size; 284 int iso_packet_size; 285 struct usb_fifo fifos[HFCUSB_NUM_FIFOS]; 286 287 /* control pipe background handling */ 288 struct ctrl_buf ctrl_buff[HFC_CTRL_BUFSIZE]; 289 int ctrl_in_idx, ctrl_out_idx, ctrl_cnt; 290 struct urb *ctrl_urb; 291 struct usb_ctrlrequest ctrl_write; 292 struct usb_ctrlrequest ctrl_read; 293 int ctrl_paksize; 294 int ctrl_in_pipe, ctrl_out_pipe; 295 spinlock_t ctrl_lock; /* lock for ctrl */ 296 spinlock_t lock; 297 298 __u8 threshold_mask; 299 __u8 led_state; 300 301 __u8 protocol; 302 int nt_timer; 303 int open; 304 __u8 timers; 305 __u8 initdone; 306 char name[MISDN_MAX_IDLEN]; 307 }; 308 309 /* private vendor specific data */ 310 struct hfcsusb_vdata { 311 __u8 led_scheme; /* led display scheme */ 312 signed short led_bits[8]; /* array of 8 possible LED bitmask */ 313 char *vend_name; /* device name */ 314 }; 315 316 317 #define HFC_MAX_TE_LAYER1_STATE 8 318 #define HFC_MAX_NT_LAYER1_STATE 4 319 320 static const char *HFC_TE_LAYER1_STATES[HFC_MAX_TE_LAYER1_STATE + 1] = { 321 "TE F0 - Reset", 322 "TE F1 - Reset", 323 "TE F2 - Sensing", 324 "TE F3 - Deactivated", 325 "TE F4 - Awaiting signal", 326 "TE F5 - Identifying input", 327 "TE F6 - Synchronized", 328 "TE F7 - Activated", 329 "TE F8 - Lost framing", 330 }; 331 332 static const char *HFC_NT_LAYER1_STATES[HFC_MAX_NT_LAYER1_STATE + 1] = { 333 "NT G0 - Reset", 334 "NT G1 - Deactive", 335 "NT G2 - Pending activation", 336 "NT G3 - Active", 337 "NT G4 - Pending deactivation", 338 }; 339 340 /* supported devices */ 341 static const struct usb_device_id hfcsusb_idtab[] = { 342 { 343 USB_DEVICE(0x0959, 0x2bd0), 344 .driver_info = (unsigned long) &((struct hfcsusb_vdata) 345 {LED_OFF, {4, 0, 2, 1}, 346 "ISDN USB TA (Cologne Chip HFC-S USB based)"}), 347 }, 348 { 349 USB_DEVICE(0x0675, 0x1688), 350 .driver_info = (unsigned long) &((struct hfcsusb_vdata) 351 {LED_SCHEME1, {1, 2, 0, 0}, 352 "DrayTek miniVigor 128 USB ISDN TA"}), 353 }, 354 { 355 USB_DEVICE(0x07b0, 0x0007), 356 .driver_info = (unsigned long) &((struct hfcsusb_vdata) 357 {LED_SCHEME1, {0x80, -64, -32, -16}, 358 "Billion tiny USB ISDN TA 128"}), 359 }, 360 { 361 USB_DEVICE(0x0742, 0x2008), 362 .driver_info = (unsigned long) &((struct hfcsusb_vdata) 363 {LED_SCHEME1, {4, 0, 2, 1}, 364 "Stollmann USB TA"}), 365 }, 366 { 367 USB_DEVICE(0x0742, 0x2009), 368 .driver_info = (unsigned long) &((struct hfcsusb_vdata) 369 {LED_SCHEME1, {4, 0, 2, 1}, 370 "Aceex USB ISDN TA"}), 371 }, 372 { 373 USB_DEVICE(0x0742, 0x200A), 374 .driver_info = (unsigned long) &((struct hfcsusb_vdata) 375 {LED_SCHEME1, {4, 0, 2, 1}, 376 "OEM USB ISDN TA"}), 377 }, 378 { 379 USB_DEVICE(0x08e3, 0x0301), 380 .driver_info = (unsigned long) &((struct hfcsusb_vdata) 381 {LED_SCHEME1, {2, 0, 1, 4}, 382 "Olitec USB RNIS"}), 383 }, 384 { 385 USB_DEVICE(0x07fa, 0x0846), 386 .driver_info = (unsigned long) &((struct hfcsusb_vdata) 387 {LED_SCHEME1, {0x80, -64, -32, -16}, 388 "Bewan Modem RNIS USB"}), 389 }, 390 { 391 USB_DEVICE(0x07fa, 0x0847), 392 .driver_info = (unsigned long) &((struct hfcsusb_vdata) 393 {LED_SCHEME1, {0x80, -64, -32, -16}, 394 "Djinn Numeris USB"}), 395 }, 396 { 397 USB_DEVICE(0x07b0, 0x0006), 398 .driver_info = (unsigned long) &((struct hfcsusb_vdata) 399 {LED_SCHEME1, {0x80, -64, -32, -16}, 400 "Twister ISDN TA"}), 401 }, 402 { 403 USB_DEVICE(0x071d, 0x1005), 404 .driver_info = (unsigned long) &((struct hfcsusb_vdata) 405 {LED_SCHEME1, {0x02, 0, 0x01, 0x04}, 406 "Eicon DIVA USB 4.0"}), 407 }, 408 { 409 USB_DEVICE(0x0586, 0x0102), 410 .driver_info = (unsigned long) &((struct hfcsusb_vdata) 411 {LED_SCHEME1, {0x88, -64, -32, -16}, 412 "ZyXEL OMNI.NET USB II"}), 413 }, 414 { 415 USB_DEVICE(0x1ae7, 0x0525), 416 .driver_info = (unsigned long) &((struct hfcsusb_vdata) 417 {LED_SCHEME1, {0x88, -64, -32, -16}, 418 "X-Tensions USB ISDN TA XC-525"}), 419 }, 420 { } 421 }; 422 423 MODULE_DEVICE_TABLE(usb, hfcsusb_idtab); 424 425 #endif /* __HFCSUSB_H__ */ 426