1 /* 2 * arch/arm/mach-vt8500/irq.c 3 * 4 * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> 5 * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 20 */ 21 22 /* 23 * This file is copied and modified from the original irq.c provided by 24 * Alexey Charkov. Minor changes have been made for Device Tree Support. 25 */ 26 27 #include <linux/slab.h> 28 #include <linux/io.h> 29 #include <linux/irq.h> 30 #include <linux/irqdomain.h> 31 #include <linux/interrupt.h> 32 #include <linux/bitops.h> 33 34 #include <linux/of.h> 35 #include <linux/of_irq.h> 36 #include <linux/of_address.h> 37 38 #include <asm/irq.h> 39 #include <asm/exception.h> 40 #include <asm/mach/irq.h> 41 42 #include "irqchip.h" 43 44 #define VT8500_ICPC_IRQ 0x20 45 #define VT8500_ICPC_FIQ 0x24 46 #define VT8500_ICDC 0x40 /* Destination Control 64*u32 */ 47 #define VT8500_ICIS 0x80 /* Interrupt status, 16*u32 */ 48 49 /* ICPC */ 50 #define ICPC_MASK 0x3F 51 #define ICPC_ROTATE BIT(6) 52 53 /* IC_DCTR */ 54 #define ICDC_IRQ 0x00 55 #define ICDC_FIQ 0x01 56 #define ICDC_DSS0 0x02 57 #define ICDC_DSS1 0x03 58 #define ICDC_DSS2 0x04 59 #define ICDC_DSS3 0x05 60 #define ICDC_DSS4 0x06 61 #define ICDC_DSS5 0x07 62 63 #define VT8500_INT_DISABLE 0 64 #define VT8500_INT_ENABLE BIT(3) 65 66 #define VT8500_TRIGGER_HIGH 0 67 #define VT8500_TRIGGER_RISING BIT(5) 68 #define VT8500_TRIGGER_FALLING BIT(6) 69 #define VT8500_EDGE ( VT8500_TRIGGER_RISING \ 70 | VT8500_TRIGGER_FALLING) 71 72 /* vt8500 has 1 intc, wm8505 and wm8650 have 2 */ 73 #define VT8500_INTC_MAX 2 74 75 struct vt8500_irq_data { 76 void __iomem *base; /* IO Memory base address */ 77 struct irq_domain *domain; /* Domain for this controller */ 78 }; 79 80 /* Global variable for accessing io-mem addresses */ 81 static struct vt8500_irq_data intc[VT8500_INTC_MAX]; 82 static u32 active_cnt = 0; 83 84 static void vt8500_irq_mask(struct irq_data *d) 85 { 86 struct vt8500_irq_data *priv = d->domain->host_data; 87 void __iomem *base = priv->base; 88 void __iomem *stat_reg = base + VT8500_ICIS + (d->hwirq < 32 ? 0 : 4); 89 u8 edge, dctr; 90 u32 status; 91 92 edge = readb(base + VT8500_ICDC + d->hwirq) & VT8500_EDGE; 93 if (edge) { 94 status = readl(stat_reg); 95 96 status |= (1 << (d->hwirq & 0x1f)); 97 writel(status, stat_reg); 98 } else { 99 dctr = readb(base + VT8500_ICDC + d->hwirq); 100 dctr &= ~VT8500_INT_ENABLE; 101 writeb(dctr, base + VT8500_ICDC + d->hwirq); 102 } 103 } 104 105 static void vt8500_irq_unmask(struct irq_data *d) 106 { 107 struct vt8500_irq_data *priv = d->domain->host_data; 108 void __iomem *base = priv->base; 109 u8 dctr; 110 111 dctr = readb(base + VT8500_ICDC + d->hwirq); 112 dctr |= VT8500_INT_ENABLE; 113 writeb(dctr, base + VT8500_ICDC + d->hwirq); 114 } 115 116 static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type) 117 { 118 struct vt8500_irq_data *priv = d->domain->host_data; 119 void __iomem *base = priv->base; 120 u8 dctr; 121 122 dctr = readb(base + VT8500_ICDC + d->hwirq); 123 dctr &= ~VT8500_EDGE; 124 125 switch (flow_type) { 126 case IRQF_TRIGGER_LOW: 127 return -EINVAL; 128 case IRQF_TRIGGER_HIGH: 129 dctr |= VT8500_TRIGGER_HIGH; 130 __irq_set_handler_locked(d->irq, handle_level_irq); 131 break; 132 case IRQF_TRIGGER_FALLING: 133 dctr |= VT8500_TRIGGER_FALLING; 134 __irq_set_handler_locked(d->irq, handle_edge_irq); 135 break; 136 case IRQF_TRIGGER_RISING: 137 dctr |= VT8500_TRIGGER_RISING; 138 __irq_set_handler_locked(d->irq, handle_edge_irq); 139 break; 140 } 141 writeb(dctr, base + VT8500_ICDC + d->hwirq); 142 143 return 0; 144 } 145 146 static struct irq_chip vt8500_irq_chip = { 147 .name = "vt8500", 148 .irq_ack = vt8500_irq_mask, 149 .irq_mask = vt8500_irq_mask, 150 .irq_unmask = vt8500_irq_unmask, 151 .irq_set_type = vt8500_irq_set_type, 152 }; 153 154 static void __init vt8500_init_irq_hw(void __iomem *base) 155 { 156 u32 i; 157 158 /* Enable rotating priority for IRQ */ 159 writel(ICPC_ROTATE, base + VT8500_ICPC_IRQ); 160 writel(0x00, base + VT8500_ICPC_FIQ); 161 162 /* Disable all interrupts and route them to IRQ */ 163 for (i = 0; i < 64; i++) 164 writeb(VT8500_INT_DISABLE | ICDC_IRQ, base + VT8500_ICDC + i); 165 } 166 167 static int vt8500_irq_map(struct irq_domain *h, unsigned int virq, 168 irq_hw_number_t hw) 169 { 170 irq_set_chip_and_handler(virq, &vt8500_irq_chip, handle_level_irq); 171 set_irq_flags(virq, IRQF_VALID); 172 173 return 0; 174 } 175 176 static struct irq_domain_ops vt8500_irq_domain_ops = { 177 .map = vt8500_irq_map, 178 .xlate = irq_domain_xlate_onecell, 179 }; 180 181 static void __exception_irq_entry vt8500_handle_irq(struct pt_regs *regs) 182 { 183 u32 stat, i; 184 int irqnr; 185 void __iomem *base; 186 187 /* Loop through each active controller */ 188 for (i=0; i<active_cnt; i++) { 189 base = intc[i].base; 190 irqnr = readl_relaxed(base) & 0x3F; 191 /* 192 Highest Priority register default = 63, so check that this 193 is a real interrupt by checking the status register 194 */ 195 if (irqnr == 63) { 196 stat = readl_relaxed(base + VT8500_ICIS + 4); 197 if (!(stat & BIT(31))) 198 continue; 199 } 200 201 handle_domain_irq(intc[i].domain, irqnr, regs); 202 } 203 } 204 205 static int __init vt8500_irq_init(struct device_node *node, 206 struct device_node *parent) 207 { 208 int irq, i; 209 struct device_node *np = node; 210 211 if (active_cnt == VT8500_INTC_MAX) { 212 pr_err("%s: Interrupt controllers > VT8500_INTC_MAX\n", 213 __func__); 214 goto out; 215 } 216 217 intc[active_cnt].base = of_iomap(np, 0); 218 intc[active_cnt].domain = irq_domain_add_linear(node, 64, 219 &vt8500_irq_domain_ops, &intc[active_cnt]); 220 221 if (!intc[active_cnt].base) { 222 pr_err("%s: Unable to map IO memory\n", __func__); 223 goto out; 224 } 225 226 if (!intc[active_cnt].domain) { 227 pr_err("%s: Unable to add irq domain!\n", __func__); 228 goto out; 229 } 230 231 set_handle_irq(vt8500_handle_irq); 232 233 vt8500_init_irq_hw(intc[active_cnt].base); 234 235 pr_info("vt8500-irq: Added interrupt controller\n"); 236 237 active_cnt++; 238 239 /* check if this is a slaved controller */ 240 if (of_irq_count(np) != 0) { 241 /* check that we have the correct number of interrupts */ 242 if (of_irq_count(np) != 8) { 243 pr_err("%s: Incorrect IRQ map for slaved controller\n", 244 __func__); 245 return -EINVAL; 246 } 247 248 for (i = 0; i < 8; i++) { 249 irq = irq_of_parse_and_map(np, i); 250 enable_irq(irq); 251 } 252 253 pr_info("vt8500-irq: Enabled slave->parent interrupts\n"); 254 } 255 out: 256 return 0; 257 } 258 259 IRQCHIP_DECLARE(vt8500_irq, "via,vt8500-intc", vt8500_irq_init); 260