1 /* 2 * linux/arch/arm/common/vic.c 3 * 4 * Copyright (C) 1999 - 2003 ARM Limited 5 * Copyright (C) 2000 Deep Blue Solutions Ltd 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 20 */ 21 22 #include <linux/export.h> 23 #include <linux/init.h> 24 #include <linux/list.h> 25 #include <linux/io.h> 26 #include <linux/irq.h> 27 #include <linux/irqchip/chained_irq.h> 28 #include <linux/irqdomain.h> 29 #include <linux/of.h> 30 #include <linux/of_address.h> 31 #include <linux/of_irq.h> 32 #include <linux/syscore_ops.h> 33 #include <linux/device.h> 34 #include <linux/amba/bus.h> 35 #include <linux/irqchip/arm-vic.h> 36 37 #include <asm/exception.h> 38 #include <asm/irq.h> 39 40 #include "irqchip.h" 41 42 #define VIC_IRQ_STATUS 0x00 43 #define VIC_FIQ_STATUS 0x04 44 #define VIC_INT_SELECT 0x0c /* 1 = FIQ, 0 = IRQ */ 45 #define VIC_INT_SOFT 0x18 46 #define VIC_INT_SOFT_CLEAR 0x1c 47 #define VIC_PROTECT 0x20 48 #define VIC_PL190_VECT_ADDR 0x30 /* PL190 only */ 49 #define VIC_PL190_DEF_VECT_ADDR 0x34 /* PL190 only */ 50 51 #define VIC_VECT_ADDR0 0x100 /* 0 to 15 (0..31 PL192) */ 52 #define VIC_VECT_CNTL0 0x200 /* 0 to 15 (0..31 PL192) */ 53 #define VIC_ITCR 0x300 /* VIC test control register */ 54 55 #define VIC_VECT_CNTL_ENABLE (1 << 5) 56 57 #define VIC_PL192_VECT_ADDR 0xF00 58 59 /** 60 * struct vic_device - VIC PM device 61 * @parent_irq: The parent IRQ number of the VIC if cascaded, or 0. 62 * @irq: The IRQ number for the base of the VIC. 63 * @base: The register base for the VIC. 64 * @valid_sources: A bitmask of valid interrupts 65 * @resume_sources: A bitmask of interrupts for resume. 66 * @resume_irqs: The IRQs enabled for resume. 67 * @int_select: Save for VIC_INT_SELECT. 68 * @int_enable: Save for VIC_INT_ENABLE. 69 * @soft_int: Save for VIC_INT_SOFT. 70 * @protect: Save for VIC_PROTECT. 71 * @domain: The IRQ domain for the VIC. 72 */ 73 struct vic_device { 74 void __iomem *base; 75 int irq; 76 u32 valid_sources; 77 u32 resume_sources; 78 u32 resume_irqs; 79 u32 int_select; 80 u32 int_enable; 81 u32 soft_int; 82 u32 protect; 83 struct irq_domain *domain; 84 }; 85 86 /* we cannot allocate memory when VICs are initially registered */ 87 static struct vic_device vic_devices[CONFIG_ARM_VIC_NR]; 88 89 static int vic_id; 90 91 static void vic_handle_irq(struct pt_regs *regs); 92 93 /** 94 * vic_init2 - common initialisation code 95 * @base: Base of the VIC. 96 * 97 * Common initialisation code for registration 98 * and resume. 99 */ 100 static void vic_init2(void __iomem *base) 101 { 102 int i; 103 104 for (i = 0; i < 16; i++) { 105 void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4); 106 writel(VIC_VECT_CNTL_ENABLE | i, reg); 107 } 108 109 writel(32, base + VIC_PL190_DEF_VECT_ADDR); 110 } 111 112 #ifdef CONFIG_PM 113 static void resume_one_vic(struct vic_device *vic) 114 { 115 void __iomem *base = vic->base; 116 117 printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base); 118 119 /* re-initialise static settings */ 120 vic_init2(base); 121 122 writel(vic->int_select, base + VIC_INT_SELECT); 123 writel(vic->protect, base + VIC_PROTECT); 124 125 /* set the enabled ints and then clear the non-enabled */ 126 writel(vic->int_enable, base + VIC_INT_ENABLE); 127 writel(~vic->int_enable, base + VIC_INT_ENABLE_CLEAR); 128 129 /* and the same for the soft-int register */ 130 131 writel(vic->soft_int, base + VIC_INT_SOFT); 132 writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR); 133 } 134 135 static void vic_resume(void) 136 { 137 int id; 138 139 for (id = vic_id - 1; id >= 0; id--) 140 resume_one_vic(vic_devices + id); 141 } 142 143 static void suspend_one_vic(struct vic_device *vic) 144 { 145 void __iomem *base = vic->base; 146 147 printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base); 148 149 vic->int_select = readl(base + VIC_INT_SELECT); 150 vic->int_enable = readl(base + VIC_INT_ENABLE); 151 vic->soft_int = readl(base + VIC_INT_SOFT); 152 vic->protect = readl(base + VIC_PROTECT); 153 154 /* set the interrupts (if any) that are used for 155 * resuming the system */ 156 157 writel(vic->resume_irqs, base + VIC_INT_ENABLE); 158 writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR); 159 } 160 161 static int vic_suspend(void) 162 { 163 int id; 164 165 for (id = 0; id < vic_id; id++) 166 suspend_one_vic(vic_devices + id); 167 168 return 0; 169 } 170 171 struct syscore_ops vic_syscore_ops = { 172 .suspend = vic_suspend, 173 .resume = vic_resume, 174 }; 175 176 /** 177 * vic_pm_init - initicall to register VIC pm 178 * 179 * This is called via late_initcall() to register 180 * the resources for the VICs due to the early 181 * nature of the VIC's registration. 182 */ 183 static int __init vic_pm_init(void) 184 { 185 if (vic_id > 0) 186 register_syscore_ops(&vic_syscore_ops); 187 188 return 0; 189 } 190 late_initcall(vic_pm_init); 191 #endif /* CONFIG_PM */ 192 193 static struct irq_chip vic_chip; 194 195 static int vic_irqdomain_map(struct irq_domain *d, unsigned int irq, 196 irq_hw_number_t hwirq) 197 { 198 struct vic_device *v = d->host_data; 199 200 /* Skip invalid IRQs, only register handlers for the real ones */ 201 if (!(v->valid_sources & (1 << hwirq))) 202 return -EPERM; 203 irq_set_chip_and_handler(irq, &vic_chip, handle_level_irq); 204 irq_set_chip_data(irq, v->base); 205 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); 206 return 0; 207 } 208 209 /* 210 * Handle each interrupt in a single VIC. Returns non-zero if we've 211 * handled at least one interrupt. This reads the status register 212 * before handling each interrupt, which is necessary given that 213 * handle_IRQ may briefly re-enable interrupts for soft IRQ handling. 214 */ 215 static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs) 216 { 217 u32 stat, irq; 218 int handled = 0; 219 220 while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) { 221 irq = ffs(stat) - 1; 222 handle_domain_irq(vic->domain, irq, regs); 223 handled = 1; 224 } 225 226 return handled; 227 } 228 229 static void vic_handle_irq_cascaded(unsigned int irq, struct irq_desc *desc) 230 { 231 u32 stat, hwirq; 232 struct irq_chip *host_chip = irq_desc_get_chip(desc); 233 struct vic_device *vic = irq_desc_get_handler_data(desc); 234 235 chained_irq_enter(host_chip, desc); 236 237 while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) { 238 hwirq = ffs(stat) - 1; 239 generic_handle_irq(irq_find_mapping(vic->domain, hwirq)); 240 } 241 242 chained_irq_exit(host_chip, desc); 243 } 244 245 /* 246 * Keep iterating over all registered VIC's until there are no pending 247 * interrupts. 248 */ 249 static void __exception_irq_entry vic_handle_irq(struct pt_regs *regs) 250 { 251 int i, handled; 252 253 do { 254 for (i = 0, handled = 0; i < vic_id; ++i) 255 handled |= handle_one_vic(&vic_devices[i], regs); 256 } while (handled); 257 } 258 259 static struct irq_domain_ops vic_irqdomain_ops = { 260 .map = vic_irqdomain_map, 261 .xlate = irq_domain_xlate_onetwocell, 262 }; 263 264 /** 265 * vic_register() - Register a VIC. 266 * @base: The base address of the VIC. 267 * @parent_irq: The parent IRQ if cascaded, else 0. 268 * @irq: The base IRQ for the VIC. 269 * @valid_sources: bitmask of valid interrupts 270 * @resume_sources: bitmask of interrupts allowed for resume sources. 271 * @node: The device tree node associated with the VIC. 272 * 273 * Register the VIC with the system device tree so that it can be notified 274 * of suspend and resume requests and ensure that the correct actions are 275 * taken to re-instate the settings on resume. 276 * 277 * This also configures the IRQ domain for the VIC. 278 */ 279 static void __init vic_register(void __iomem *base, unsigned int parent_irq, 280 unsigned int irq, 281 u32 valid_sources, u32 resume_sources, 282 struct device_node *node) 283 { 284 struct vic_device *v; 285 int i; 286 287 if (vic_id >= ARRAY_SIZE(vic_devices)) { 288 printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__); 289 return; 290 } 291 292 v = &vic_devices[vic_id]; 293 v->base = base; 294 v->valid_sources = valid_sources; 295 v->resume_sources = resume_sources; 296 set_handle_irq(vic_handle_irq); 297 vic_id++; 298 299 if (parent_irq) { 300 irq_set_handler_data(parent_irq, v); 301 irq_set_chained_handler(parent_irq, vic_handle_irq_cascaded); 302 } 303 304 v->domain = irq_domain_add_simple(node, fls(valid_sources), irq, 305 &vic_irqdomain_ops, v); 306 /* create an IRQ mapping for each valid IRQ */ 307 for (i = 0; i < fls(valid_sources); i++) 308 if (valid_sources & (1 << i)) 309 irq_create_mapping(v->domain, i); 310 /* If no base IRQ was passed, figure out our allocated base */ 311 if (irq) 312 v->irq = irq; 313 else 314 v->irq = irq_find_mapping(v->domain, 0); 315 } 316 317 static void vic_ack_irq(struct irq_data *d) 318 { 319 void __iomem *base = irq_data_get_irq_chip_data(d); 320 unsigned int irq = d->hwirq; 321 writel(1 << irq, base + VIC_INT_ENABLE_CLEAR); 322 /* moreover, clear the soft-triggered, in case it was the reason */ 323 writel(1 << irq, base + VIC_INT_SOFT_CLEAR); 324 } 325 326 static void vic_mask_irq(struct irq_data *d) 327 { 328 void __iomem *base = irq_data_get_irq_chip_data(d); 329 unsigned int irq = d->hwirq; 330 writel(1 << irq, base + VIC_INT_ENABLE_CLEAR); 331 } 332 333 static void vic_unmask_irq(struct irq_data *d) 334 { 335 void __iomem *base = irq_data_get_irq_chip_data(d); 336 unsigned int irq = d->hwirq; 337 writel(1 << irq, base + VIC_INT_ENABLE); 338 } 339 340 #if defined(CONFIG_PM) 341 static struct vic_device *vic_from_irq(unsigned int irq) 342 { 343 struct vic_device *v = vic_devices; 344 unsigned int base_irq = irq & ~31; 345 int id; 346 347 for (id = 0; id < vic_id; id++, v++) { 348 if (v->irq == base_irq) 349 return v; 350 } 351 352 return NULL; 353 } 354 355 static int vic_set_wake(struct irq_data *d, unsigned int on) 356 { 357 struct vic_device *v = vic_from_irq(d->irq); 358 unsigned int off = d->hwirq; 359 u32 bit = 1 << off; 360 361 if (!v) 362 return -EINVAL; 363 364 if (!(bit & v->resume_sources)) 365 return -EINVAL; 366 367 if (on) 368 v->resume_irqs |= bit; 369 else 370 v->resume_irqs &= ~bit; 371 372 return 0; 373 } 374 #else 375 #define vic_set_wake NULL 376 #endif /* CONFIG_PM */ 377 378 static struct irq_chip vic_chip = { 379 .name = "VIC", 380 .irq_ack = vic_ack_irq, 381 .irq_mask = vic_mask_irq, 382 .irq_unmask = vic_unmask_irq, 383 .irq_set_wake = vic_set_wake, 384 }; 385 386 static void __init vic_disable(void __iomem *base) 387 { 388 writel(0, base + VIC_INT_SELECT); 389 writel(0, base + VIC_INT_ENABLE); 390 writel(~0, base + VIC_INT_ENABLE_CLEAR); 391 writel(0, base + VIC_ITCR); 392 writel(~0, base + VIC_INT_SOFT_CLEAR); 393 } 394 395 static void __init vic_clear_interrupts(void __iomem *base) 396 { 397 unsigned int i; 398 399 writel(0, base + VIC_PL190_VECT_ADDR); 400 for (i = 0; i < 19; i++) { 401 unsigned int value; 402 403 value = readl(base + VIC_PL190_VECT_ADDR); 404 writel(value, base + VIC_PL190_VECT_ADDR); 405 } 406 } 407 408 /* 409 * The PL190 cell from ARM has been modified by ST to handle 64 interrupts. 410 * The original cell has 32 interrupts, while the modified one has 64, 411 * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case 412 * the probe function is called twice, with base set to offset 000 413 * and 020 within the page. We call this "second block". 414 */ 415 static void __init vic_init_st(void __iomem *base, unsigned int irq_start, 416 u32 vic_sources, struct device_node *node) 417 { 418 unsigned int i; 419 int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0; 420 421 /* Disable all interrupts initially. */ 422 vic_disable(base); 423 424 /* 425 * Make sure we clear all existing interrupts. The vector registers 426 * in this cell are after the second block of general registers, 427 * so we can address them using standard offsets, but only from 428 * the second base address, which is 0x20 in the page 429 */ 430 if (vic_2nd_block) { 431 vic_clear_interrupts(base); 432 433 /* ST has 16 vectors as well, but we don't enable them by now */ 434 for (i = 0; i < 16; i++) { 435 void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4); 436 writel(0, reg); 437 } 438 439 writel(32, base + VIC_PL190_DEF_VECT_ADDR); 440 } 441 442 vic_register(base, 0, irq_start, vic_sources, 0, node); 443 } 444 445 void __init __vic_init(void __iomem *base, int parent_irq, int irq_start, 446 u32 vic_sources, u32 resume_sources, 447 struct device_node *node) 448 { 449 unsigned int i; 450 u32 cellid = 0; 451 enum amba_vendor vendor; 452 453 /* Identify which VIC cell this one is, by reading the ID */ 454 for (i = 0; i < 4; i++) { 455 void __iomem *addr; 456 addr = (void __iomem *)((u32)base & PAGE_MASK) + 0xfe0 + (i * 4); 457 cellid |= (readl(addr) & 0xff) << (8 * i); 458 } 459 vendor = (cellid >> 12) & 0xff; 460 printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n", 461 base, cellid, vendor); 462 463 switch(vendor) { 464 case AMBA_VENDOR_ST: 465 vic_init_st(base, irq_start, vic_sources, node); 466 return; 467 default: 468 printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n"); 469 /* fall through */ 470 case AMBA_VENDOR_ARM: 471 break; 472 } 473 474 /* Disable all interrupts initially. */ 475 vic_disable(base); 476 477 /* Make sure we clear all existing interrupts */ 478 vic_clear_interrupts(base); 479 480 vic_init2(base); 481 482 vic_register(base, parent_irq, irq_start, vic_sources, resume_sources, node); 483 } 484 485 /** 486 * vic_init() - initialise a vectored interrupt controller 487 * @base: iomem base address 488 * @irq_start: starting interrupt number, must be muliple of 32 489 * @vic_sources: bitmask of interrupt sources to allow 490 * @resume_sources: bitmask of interrupt sources to allow for resume 491 */ 492 void __init vic_init(void __iomem *base, unsigned int irq_start, 493 u32 vic_sources, u32 resume_sources) 494 { 495 __vic_init(base, 0, irq_start, vic_sources, resume_sources, NULL); 496 } 497 498 /** 499 * vic_init_cascaded() - initialise a cascaded vectored interrupt controller 500 * @base: iomem base address 501 * @parent_irq: the parent IRQ we're cascaded off 502 * @irq_start: starting interrupt number, must be muliple of 32 503 * @vic_sources: bitmask of interrupt sources to allow 504 * @resume_sources: bitmask of interrupt sources to allow for resume 505 * 506 * This returns the base for the new interrupts or negative on error. 507 */ 508 int __init vic_init_cascaded(void __iomem *base, unsigned int parent_irq, 509 u32 vic_sources, u32 resume_sources) 510 { 511 struct vic_device *v; 512 513 v = &vic_devices[vic_id]; 514 __vic_init(base, parent_irq, 0, vic_sources, resume_sources, NULL); 515 /* Return out acquired base */ 516 return v->irq; 517 } 518 EXPORT_SYMBOL_GPL(vic_init_cascaded); 519 520 #ifdef CONFIG_OF 521 int __init vic_of_init(struct device_node *node, struct device_node *parent) 522 { 523 void __iomem *regs; 524 u32 interrupt_mask = ~0; 525 u32 wakeup_mask = ~0; 526 527 if (WARN(parent, "non-root VICs are not supported")) 528 return -EINVAL; 529 530 regs = of_iomap(node, 0); 531 if (WARN_ON(!regs)) 532 return -EIO; 533 534 of_property_read_u32(node, "valid-mask", &interrupt_mask); 535 of_property_read_u32(node, "valid-wakeup-mask", &wakeup_mask); 536 537 /* 538 * Passing 0 as first IRQ makes the simple domain allocate descriptors 539 */ 540 __vic_init(regs, 0, 0, interrupt_mask, wakeup_mask, node); 541 542 return 0; 543 } 544 IRQCHIP_DECLARE(arm_pl190_vic, "arm,pl190-vic", vic_of_init); 545 IRQCHIP_DECLARE(arm_pl192_vic, "arm,pl192-vic", vic_of_init); 546 IRQCHIP_DECLARE(arm_versatile_vic, "arm,versatile-vic", vic_of_init); 547 #endif /* CONFIG OF */ 548