1# SPDX-License-Identifier: GPL-2.0-only 2menu "IRQ chip support" 3 4config IRQCHIP 5 def_bool y 6 depends on OF_IRQ 7 8config ARM_GIC 9 bool 10 select IRQ_DOMAIN_HIERARCHY 11 select GENERIC_IRQ_EFFECTIVE_AFF_MASK 12 13config ARM_GIC_PM 14 bool 15 depends on PM 16 select ARM_GIC 17 18config ARM_GIC_MAX_NR 19 int 20 depends on ARM_GIC 21 default 2 if ARCH_REALVIEW 22 default 1 23 24config ARM_GIC_V2M 25 bool 26 depends on PCI 27 select ARM_GIC 28 select PCI_MSI 29 30config GIC_NON_BANKED 31 bool 32 33config ARM_GIC_V3 34 bool 35 select IRQ_DOMAIN_HIERARCHY 36 select PARTITION_PERCPU 37 select GENERIC_IRQ_EFFECTIVE_AFF_MASK 38 39config ARM_GIC_V3_ITS 40 bool 41 select GENERIC_MSI_IRQ_DOMAIN 42 default ARM_GIC_V3 43 44config ARM_GIC_V3_ITS_PCI 45 bool 46 depends on ARM_GIC_V3_ITS 47 depends on PCI 48 depends on PCI_MSI 49 default ARM_GIC_V3_ITS 50 51config ARM_GIC_V3_ITS_FSL_MC 52 bool 53 depends on ARM_GIC_V3_ITS 54 depends on FSL_MC_BUS 55 default ARM_GIC_V3_ITS 56 57config ARM_NVIC 58 bool 59 select IRQ_DOMAIN_HIERARCHY 60 select GENERIC_IRQ_CHIP 61 62config ARM_VIC 63 bool 64 select IRQ_DOMAIN 65 66config ARM_VIC_NR 67 int 68 default 4 if ARCH_S5PV210 69 default 2 70 depends on ARM_VIC 71 help 72 The maximum number of VICs available in the system, for 73 power management. 74 75config ARMADA_370_XP_IRQ 76 bool 77 select GENERIC_IRQ_CHIP 78 select PCI_MSI if PCI 79 select GENERIC_IRQ_EFFECTIVE_AFF_MASK 80 81config ALPINE_MSI 82 bool 83 depends on PCI 84 select PCI_MSI 85 select GENERIC_IRQ_CHIP 86 87config AL_FIC 88 bool "Amazon's Annapurna Labs Fabric Interrupt Controller" 89 depends on OF || COMPILE_TEST 90 select GENERIC_IRQ_CHIP 91 select IRQ_DOMAIN 92 help 93 Support Amazon's Annapurna Labs Fabric Interrupt Controller. 94 95config ATMEL_AIC_IRQ 96 bool 97 select GENERIC_IRQ_CHIP 98 select IRQ_DOMAIN 99 select SPARSE_IRQ 100 101config ATMEL_AIC5_IRQ 102 bool 103 select GENERIC_IRQ_CHIP 104 select IRQ_DOMAIN 105 select SPARSE_IRQ 106 107config I8259 108 bool 109 select IRQ_DOMAIN 110 111config BCM6345_L1_IRQ 112 bool 113 select GENERIC_IRQ_CHIP 114 select IRQ_DOMAIN 115 select GENERIC_IRQ_EFFECTIVE_AFF_MASK 116 117config BCM7038_L1_IRQ 118 bool 119 select GENERIC_IRQ_CHIP 120 select IRQ_DOMAIN 121 select GENERIC_IRQ_EFFECTIVE_AFF_MASK 122 123config BCM7120_L2_IRQ 124 bool 125 select GENERIC_IRQ_CHIP 126 select IRQ_DOMAIN 127 128config BRCMSTB_L2_IRQ 129 bool 130 select GENERIC_IRQ_CHIP 131 select IRQ_DOMAIN 132 133config DAVINCI_AINTC 134 bool 135 select GENERIC_IRQ_CHIP 136 select IRQ_DOMAIN 137 138config DAVINCI_CP_INTC 139 bool 140 select GENERIC_IRQ_CHIP 141 select IRQ_DOMAIN 142 143config DW_APB_ICTL 144 bool 145 select GENERIC_IRQ_CHIP 146 select IRQ_DOMAIN_HIERARCHY 147 148config FARADAY_FTINTC010 149 bool 150 select IRQ_DOMAIN 151 select SPARSE_IRQ 152 153config HISILICON_IRQ_MBIGEN 154 bool 155 select ARM_GIC_V3 156 select ARM_GIC_V3_ITS 157 158config IMGPDC_IRQ 159 bool 160 select GENERIC_IRQ_CHIP 161 select IRQ_DOMAIN 162 163config IXP4XX_IRQ 164 bool 165 select IRQ_DOMAIN 166 select SPARSE_IRQ 167 168config MADERA_IRQ 169 tristate 170 171config IRQ_MIPS_CPU 172 bool 173 select GENERIC_IRQ_CHIP 174 select GENERIC_IRQ_IPI if SYS_SUPPORTS_MULTITHREADING 175 select IRQ_DOMAIN 176 select GENERIC_IRQ_EFFECTIVE_AFF_MASK 177 178config CLPS711X_IRQCHIP 179 bool 180 depends on ARCH_CLPS711X 181 select IRQ_DOMAIN 182 select SPARSE_IRQ 183 default y 184 185config OMPIC 186 bool 187 188config OR1K_PIC 189 bool 190 select IRQ_DOMAIN 191 192config OMAP_IRQCHIP 193 bool 194 select GENERIC_IRQ_CHIP 195 select IRQ_DOMAIN 196 197config ORION_IRQCHIP 198 bool 199 select IRQ_DOMAIN 200 201config PIC32_EVIC 202 bool 203 select GENERIC_IRQ_CHIP 204 select IRQ_DOMAIN 205 206config JCORE_AIC 207 bool "J-Core integrated AIC" if COMPILE_TEST 208 depends on OF 209 select IRQ_DOMAIN 210 help 211 Support for the J-Core integrated AIC. 212 213config RDA_INTC 214 bool 215 select IRQ_DOMAIN 216 217config RENESAS_INTC_IRQPIN 218 bool "Renesas INTC External IRQ Pin Support" if COMPILE_TEST 219 select IRQ_DOMAIN 220 help 221 Enable support for the Renesas Interrupt Controller for external 222 interrupt pins, as found on SH/R-Mobile and R-Car Gen1 SoCs. 223 224config RENESAS_IRQC 225 bool "Renesas R-Mobile APE6, R-Car Gen{2,3} and RZ/G{1,2} IRQC support" if COMPILE_TEST 226 select GENERIC_IRQ_CHIP 227 select IRQ_DOMAIN 228 help 229 Enable support for the Renesas Interrupt Controller for external 230 devices, as found on R-Mobile APE6, R-Car Gen{2,3} and RZ/G{1,2} SoCs. 231 232config RENESAS_RZA1_IRQC 233 bool "Renesas RZ/A1 IRQC support" if COMPILE_TEST 234 select IRQ_DOMAIN_HIERARCHY 235 help 236 Enable support for the Renesas RZ/A1 Interrupt Controller, to use up 237 to 8 external interrupts with configurable sense select. 238 239config SL28CPLD_INTC 240 bool "Kontron sl28cpld IRQ controller" 241 depends on MFD_SL28CPLD=y || COMPILE_TEST 242 select REGMAP_IRQ 243 help 244 Interrupt controller driver for the board management controller 245 found on the Kontron sl28 CPLD. 246 247config ST_IRQCHIP 248 bool 249 select REGMAP 250 select MFD_SYSCON 251 help 252 Enables SysCfg Controlled IRQs on STi based platforms. 253 254config TB10X_IRQC 255 bool 256 select IRQ_DOMAIN 257 select GENERIC_IRQ_CHIP 258 259config TS4800_IRQ 260 tristate "TS-4800 IRQ controller" 261 select IRQ_DOMAIN 262 depends on HAS_IOMEM 263 depends on SOC_IMX51 || COMPILE_TEST 264 help 265 Support for the TS-4800 FPGA IRQ controller 266 267config VERSATILE_FPGA_IRQ 268 bool 269 select IRQ_DOMAIN 270 271config VERSATILE_FPGA_IRQ_NR 272 int 273 default 4 274 depends on VERSATILE_FPGA_IRQ 275 276config XTENSA_MX 277 bool 278 select IRQ_DOMAIN 279 select GENERIC_IRQ_EFFECTIVE_AFF_MASK 280 281config XILINX_INTC 282 bool "Xilinx Interrupt Controller IP" 283 depends on MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP 284 select IRQ_DOMAIN 285 help 286 Support for the Xilinx Interrupt Controller IP core. 287 This is used as a primary controller with MicroBlaze and can also 288 be used as a secondary chained controller on other platforms. 289 290config IRQ_CROSSBAR 291 bool 292 help 293 Support for a CROSSBAR ip that precedes the main interrupt controller. 294 The primary irqchip invokes the crossbar's callback which inturn allocates 295 a free irq and configures the IP. Thus the peripheral interrupts are 296 routed to one of the free irqchip interrupt lines. 297 298config KEYSTONE_IRQ 299 tristate "Keystone 2 IRQ controller IP" 300 depends on ARCH_KEYSTONE 301 help 302 Support for Texas Instruments Keystone 2 IRQ controller IP which 303 is part of the Keystone 2 IPC mechanism 304 305config MIPS_GIC 306 bool 307 select GENERIC_IRQ_IPI 308 select MIPS_CM 309 310config INGENIC_IRQ 311 bool 312 depends on MACH_INGENIC 313 default y 314 315config INGENIC_TCU_IRQ 316 bool "Ingenic JZ47xx TCU interrupt controller" 317 default MACH_INGENIC 318 depends on MIPS || COMPILE_TEST 319 select MFD_SYSCON 320 select GENERIC_IRQ_CHIP 321 help 322 Support for interrupts in the Timer/Counter Unit (TCU) of the Ingenic 323 JZ47xx SoCs. 324 325 If unsure, say N. 326 327config RENESAS_H8300H_INTC 328 bool 329 select IRQ_DOMAIN 330 331config RENESAS_H8S_INTC 332 bool "Renesas H8S Interrupt Controller Support" if COMPILE_TEST 333 select IRQ_DOMAIN 334 help 335 Enable support for the Renesas H8/300 Interrupt Controller, as found 336 on Renesas H8S SoCs. 337 338config IMX_GPCV2 339 bool 340 select IRQ_DOMAIN 341 help 342 Enables the wakeup IRQs for IMX platforms with GPCv2 block 343 344config IRQ_MXS 345 def_bool y if MACH_ASM9260 || ARCH_MXS 346 select IRQ_DOMAIN 347 select STMP_DEVICE 348 349config MSCC_OCELOT_IRQ 350 bool 351 select IRQ_DOMAIN 352 select GENERIC_IRQ_CHIP 353 354config MVEBU_GICP 355 bool 356 357config MVEBU_ICU 358 bool 359 360config MVEBU_ODMI 361 bool 362 select GENERIC_MSI_IRQ_DOMAIN 363 364config MVEBU_PIC 365 bool 366 367config MVEBU_SEI 368 bool 369 370config LS_EXTIRQ 371 def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE 372 select MFD_SYSCON 373 374config LS_SCFG_MSI 375 def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE 376 depends on PCI && PCI_MSI 377 378config PARTITION_PERCPU 379 bool 380 381config STM32_EXTI 382 bool 383 select IRQ_DOMAIN 384 select GENERIC_IRQ_CHIP 385 386config QCOM_IRQ_COMBINER 387 bool "QCOM IRQ combiner support" 388 depends on ARCH_QCOM && ACPI 389 select IRQ_DOMAIN_HIERARCHY 390 help 391 Say yes here to add support for the IRQ combiner devices embedded 392 in Qualcomm Technologies chips. 393 394config IRQ_UNIPHIER_AIDET 395 bool "UniPhier AIDET support" if COMPILE_TEST 396 depends on ARCH_UNIPHIER || COMPILE_TEST 397 default ARCH_UNIPHIER 398 select IRQ_DOMAIN_HIERARCHY 399 help 400 Support for the UniPhier AIDET (ARM Interrupt Detector). 401 402config MESON_IRQ_GPIO 403 bool "Meson GPIO Interrupt Multiplexer" 404 depends on ARCH_MESON 405 select IRQ_DOMAIN_HIERARCHY 406 help 407 Support Meson SoC Family GPIO Interrupt Multiplexer 408 409config GOLDFISH_PIC 410 bool "Goldfish programmable interrupt controller" 411 depends on MIPS && (GOLDFISH || COMPILE_TEST) 412 select IRQ_DOMAIN 413 help 414 Say yes here to enable Goldfish interrupt controller driver used 415 for Goldfish based virtual platforms. 416 417config QCOM_PDC 418 bool "QCOM PDC" 419 depends on ARCH_QCOM 420 select IRQ_DOMAIN_HIERARCHY 421 help 422 Power Domain Controller driver to manage and configure wakeup 423 IRQs for Qualcomm Technologies Inc (QTI) mobile chips. 424 425config CSKY_MPINTC 426 bool 427 depends on CSKY 428 help 429 Say yes here to enable C-SKY SMP interrupt controller driver used 430 for C-SKY SMP system. 431 In fact it's not mmio map in hardware and it uses ld/st to visit the 432 controller's register inside CPU. 433 434config CSKY_APB_INTC 435 bool "C-SKY APB Interrupt Controller" 436 depends on CSKY 437 help 438 Say yes here to enable C-SKY APB interrupt controller driver used 439 by C-SKY single core SOC system. It uses mmio map apb-bus to visit 440 the controller's register. 441 442config IMX_IRQSTEER 443 bool "i.MX IRQSTEER support" 444 depends on ARCH_MXC || COMPILE_TEST 445 default ARCH_MXC 446 select IRQ_DOMAIN 447 help 448 Support for the i.MX IRQSTEER interrupt multiplexer/remapper. 449 450config IMX_INTMUX 451 bool "i.MX INTMUX support" if COMPILE_TEST 452 default y if ARCH_MXC 453 select IRQ_DOMAIN 454 help 455 Support for the i.MX INTMUX interrupt multiplexer. 456 457config LS1X_IRQ 458 bool "Loongson-1 Interrupt Controller" 459 depends on MACH_LOONGSON32 460 default y 461 select IRQ_DOMAIN 462 select GENERIC_IRQ_CHIP 463 help 464 Support for the Loongson-1 platform Interrupt Controller. 465 466config TI_SCI_INTR_IRQCHIP 467 bool 468 depends on TI_SCI_PROTOCOL 469 select IRQ_DOMAIN_HIERARCHY 470 help 471 This enables the irqchip driver support for K3 Interrupt router 472 over TI System Control Interface available on some new TI's SoCs. 473 If you wish to use interrupt router irq resources managed by the 474 TI System Controller, say Y here. Otherwise, say N. 475 476config TI_SCI_INTA_IRQCHIP 477 bool 478 depends on TI_SCI_PROTOCOL 479 select IRQ_DOMAIN_HIERARCHY 480 select TI_SCI_INTA_MSI_DOMAIN 481 help 482 This enables the irqchip driver support for K3 Interrupt aggregator 483 over TI System Control Interface available on some new TI's SoCs. 484 If you wish to use interrupt aggregator irq resources managed by the 485 TI System Controller, say Y here. Otherwise, say N. 486 487config TI_PRUSS_INTC 488 tristate 489 depends on TI_PRUSS 490 default TI_PRUSS 491 select IRQ_DOMAIN 492 help 493 This enables support for the PRU-ICSS Local Interrupt Controller 494 present within a PRU-ICSS subsystem present on various TI SoCs. 495 The PRUSS INTC enables various interrupts to be routed to multiple 496 different processors within the SoC. 497 498config RISCV_INTC 499 bool "RISC-V Local Interrupt Controller" 500 depends on RISCV 501 default y 502 help 503 This enables support for the per-HART local interrupt controller 504 found in standard RISC-V systems. The per-HART local interrupt 505 controller handles timer interrupts, software interrupts, and 506 hardware interrupts. Without a per-HART local interrupt controller, 507 a RISC-V system will be unable to handle any interrupts. 508 509 If you don't know what to do here, say Y. 510 511config SIFIVE_PLIC 512 bool "SiFive Platform-Level Interrupt Controller" 513 depends on RISCV 514 select IRQ_DOMAIN_HIERARCHY 515 help 516 This enables support for the PLIC chip found in SiFive (and 517 potentially other) RISC-V systems. The PLIC controls devices 518 interrupts and connects them to each core's local interrupt 519 controller. Aside from timer and software interrupts, all other 520 interrupt sources are subordinate to the PLIC. 521 522 If you don't know what to do here, say Y. 523 524config EXYNOS_IRQ_COMBINER 525 bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST 526 depends on (ARCH_EXYNOS && ARM) || COMPILE_TEST 527 help 528 Say yes here to add support for the IRQ combiner devices embedded 529 in Samsung Exynos chips. 530 531config LOONGSON_LIOINTC 532 bool "Loongson Local I/O Interrupt Controller" 533 depends on MACH_LOONGSON64 534 default y 535 select IRQ_DOMAIN 536 select GENERIC_IRQ_CHIP 537 help 538 Support for the Loongson Local I/O Interrupt Controller. 539 540config LOONGSON_HTPIC 541 bool "Loongson3 HyperTransport PIC Controller" 542 depends on MACH_LOONGSON64 543 default y 544 select IRQ_DOMAIN 545 select GENERIC_IRQ_CHIP 546 help 547 Support for the Loongson-3 HyperTransport PIC Controller. 548 549config LOONGSON_HTVEC 550 bool "Loongson3 HyperTransport Interrupt Vector Controller" 551 depends on MACH_LOONGSON64 552 default MACH_LOONGSON64 553 select IRQ_DOMAIN_HIERARCHY 554 help 555 Support for the Loongson3 HyperTransport Interrupt Vector Controller. 556 557config LOONGSON_PCH_PIC 558 bool "Loongson PCH PIC Controller" 559 depends on MACH_LOONGSON64 || COMPILE_TEST 560 default MACH_LOONGSON64 561 select IRQ_DOMAIN_HIERARCHY 562 select IRQ_FASTEOI_HIERARCHY_HANDLERS 563 help 564 Support for the Loongson PCH PIC Controller. 565 566config LOONGSON_PCH_MSI 567 bool "Loongson PCH MSI Controller" 568 depends on MACH_LOONGSON64 || COMPILE_TEST 569 depends on PCI 570 default MACH_LOONGSON64 571 select IRQ_DOMAIN_HIERARCHY 572 select PCI_MSI 573 help 574 Support for the Loongson PCH MSI Controller. 575 576config MST_IRQ 577 bool "MStar Interrupt Controller" 578 depends on ARCH_MEDIATEK || ARCH_MSTARV7 || COMPILE_TEST 579 default ARCH_MEDIATEK 580 select IRQ_DOMAIN 581 select IRQ_DOMAIN_HIERARCHY 582 help 583 Support MStar Interrupt Controller. 584 585config WPCM450_AIC 586 bool "Nuvoton WPCM450 Advanced Interrupt Controller" 587 depends on ARCH_WPCM450 588 help 589 Support for the interrupt controller in the Nuvoton WPCM450 BMC SoC. 590 591config IRQ_IDT3243X 592 bool 593 select GENERIC_IRQ_CHIP 594 select IRQ_DOMAIN 595 596config APPLE_AIC 597 bool "Apple Interrupt Controller (AIC)" 598 depends on ARM64 599 default ARCH_APPLE 600 help 601 Support for the Apple Interrupt Controller found on Apple Silicon SoCs, 602 such as the M1. 603 604endmenu 605