xref: /openbmc/linux/drivers/irqchip/Kconfig (revision dbdc671d)
1# SPDX-License-Identifier: GPL-2.0-only
2menu "IRQ chip support"
3
4config IRQCHIP
5	def_bool y
6	depends on OF_IRQ
7
8config ARM_GIC
9	bool
10	select IRQ_DOMAIN_HIERARCHY
11	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
12
13config ARM_GIC_PM
14	bool
15	depends on PM
16	select ARM_GIC
17
18config ARM_GIC_MAX_NR
19	int
20	depends on ARM_GIC
21	default 2 if ARCH_REALVIEW
22	default 1
23
24config ARM_GIC_V2M
25	bool
26	depends on PCI
27	select ARM_GIC
28	select PCI_MSI
29
30config GIC_NON_BANKED
31	bool
32
33config ARM_GIC_V3
34	bool
35	select IRQ_DOMAIN_HIERARCHY
36	select PARTITION_PERCPU
37	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
38
39config ARM_GIC_V3_ITS
40	bool
41	select GENERIC_MSI_IRQ_DOMAIN
42	default ARM_GIC_V3
43
44config ARM_GIC_V3_ITS_PCI
45	bool
46	depends on ARM_GIC_V3_ITS
47	depends on PCI
48	depends on PCI_MSI
49	default ARM_GIC_V3_ITS
50
51config ARM_GIC_V3_ITS_FSL_MC
52	bool
53	depends on ARM_GIC_V3_ITS
54	depends on FSL_MC_BUS
55	default ARM_GIC_V3_ITS
56
57config ARM_NVIC
58	bool
59	select IRQ_DOMAIN_HIERARCHY
60	select GENERIC_IRQ_CHIP
61
62config ARM_VIC
63	bool
64	select IRQ_DOMAIN
65
66config ARM_VIC_NR
67	int
68	default 4 if ARCH_S5PV210
69	default 2
70	depends on ARM_VIC
71	help
72	  The maximum number of VICs available in the system, for
73	  power management.
74
75config ARMADA_370_XP_IRQ
76	bool
77	select GENERIC_IRQ_CHIP
78	select PCI_MSI if PCI
79	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
80
81config ALPINE_MSI
82	bool
83	depends on PCI
84	select PCI_MSI
85	select GENERIC_IRQ_CHIP
86
87config AL_FIC
88	bool "Amazon's Annapurna Labs Fabric Interrupt Controller"
89	depends on OF || COMPILE_TEST
90	select GENERIC_IRQ_CHIP
91	select IRQ_DOMAIN
92	help
93	  Support Amazon's Annapurna Labs Fabric Interrupt Controller.
94
95config ATMEL_AIC_IRQ
96	bool
97	select GENERIC_IRQ_CHIP
98	select IRQ_DOMAIN
99	select SPARSE_IRQ
100
101config ATMEL_AIC5_IRQ
102	bool
103	select GENERIC_IRQ_CHIP
104	select IRQ_DOMAIN
105	select SPARSE_IRQ
106
107config I8259
108	bool
109	select IRQ_DOMAIN
110
111config BCM6345_L1_IRQ
112	bool
113	select GENERIC_IRQ_CHIP
114	select IRQ_DOMAIN
115	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
116
117config BCM7038_L1_IRQ
118	bool
119	select GENERIC_IRQ_CHIP
120	select IRQ_DOMAIN
121	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
122
123config BCM7120_L2_IRQ
124	bool
125	select GENERIC_IRQ_CHIP
126	select IRQ_DOMAIN
127
128config BRCMSTB_L2_IRQ
129	bool
130	select GENERIC_IRQ_CHIP
131	select IRQ_DOMAIN
132
133config DAVINCI_AINTC
134	bool
135	select GENERIC_IRQ_CHIP
136	select IRQ_DOMAIN
137
138config DAVINCI_CP_INTC
139	bool
140	select GENERIC_IRQ_CHIP
141	select IRQ_DOMAIN
142
143config DW_APB_ICTL
144	bool
145	select GENERIC_IRQ_CHIP
146	select IRQ_DOMAIN_HIERARCHY
147
148config FARADAY_FTINTC010
149	bool
150	select IRQ_DOMAIN
151	select SPARSE_IRQ
152
153config HISILICON_IRQ_MBIGEN
154	bool
155	select ARM_GIC_V3
156	select ARM_GIC_V3_ITS
157
158config IMGPDC_IRQ
159	bool
160	select GENERIC_IRQ_CHIP
161	select IRQ_DOMAIN
162
163config IXP4XX_IRQ
164	bool
165	select IRQ_DOMAIN
166	select SPARSE_IRQ
167
168config MADERA_IRQ
169	tristate
170
171config IRQ_MIPS_CPU
172	bool
173	select GENERIC_IRQ_CHIP
174	select GENERIC_IRQ_IPI if SYS_SUPPORTS_MULTITHREADING
175	select IRQ_DOMAIN
176	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
177
178config CLPS711X_IRQCHIP
179	bool
180	depends on ARCH_CLPS711X
181	select IRQ_DOMAIN
182	select SPARSE_IRQ
183	default y
184
185config OMPIC
186	bool
187
188config OR1K_PIC
189	bool
190	select IRQ_DOMAIN
191
192config OMAP_IRQCHIP
193	bool
194	select GENERIC_IRQ_CHIP
195	select IRQ_DOMAIN
196
197config ORION_IRQCHIP
198	bool
199	select IRQ_DOMAIN
200
201config PIC32_EVIC
202	bool
203	select GENERIC_IRQ_CHIP
204	select IRQ_DOMAIN
205
206config JCORE_AIC
207	bool "J-Core integrated AIC" if COMPILE_TEST
208	depends on OF
209	select IRQ_DOMAIN
210	help
211	  Support for the J-Core integrated AIC.
212
213config RDA_INTC
214	bool
215	select IRQ_DOMAIN
216
217config RENESAS_INTC_IRQPIN
218	bool "Renesas INTC External IRQ Pin Support" if COMPILE_TEST
219	select IRQ_DOMAIN
220	help
221	  Enable support for the Renesas Interrupt Controller for external
222	  interrupt pins, as found on SH/R-Mobile and R-Car Gen1 SoCs.
223
224config RENESAS_IRQC
225	bool "Renesas R-Mobile APE6, R-Car Gen{2,3} and RZ/G{1,2} IRQC support" if COMPILE_TEST
226	select GENERIC_IRQ_CHIP
227	select IRQ_DOMAIN
228	help
229	  Enable support for the Renesas Interrupt Controller for external
230	  devices, as found on R-Mobile APE6, R-Car Gen{2,3} and RZ/G{1,2} SoCs.
231
232config RENESAS_RZA1_IRQC
233	bool "Renesas RZ/A1 IRQC support" if COMPILE_TEST
234	select IRQ_DOMAIN_HIERARCHY
235	help
236	  Enable support for the Renesas RZ/A1 Interrupt Controller, to use up
237	  to 8 external interrupts with configurable sense select.
238
239config SL28CPLD_INTC
240	bool "Kontron sl28cpld IRQ controller"
241	depends on MFD_SL28CPLD=y || COMPILE_TEST
242	select REGMAP_IRQ
243	help
244	  Interrupt controller driver for the board management controller
245	  found on the Kontron sl28 CPLD.
246
247config ST_IRQCHIP
248	bool
249	select REGMAP
250	select MFD_SYSCON
251	help
252	  Enables SysCfg Controlled IRQs on STi based platforms.
253
254config TB10X_IRQC
255	bool
256	select IRQ_DOMAIN
257	select GENERIC_IRQ_CHIP
258
259config TS4800_IRQ
260	tristate "TS-4800 IRQ controller"
261	select IRQ_DOMAIN
262	depends on HAS_IOMEM
263	depends on SOC_IMX51 || COMPILE_TEST
264	help
265	  Support for the TS-4800 FPGA IRQ controller
266
267config VERSATILE_FPGA_IRQ
268	bool
269	select IRQ_DOMAIN
270
271config VERSATILE_FPGA_IRQ_NR
272       int
273       default 4
274       depends on VERSATILE_FPGA_IRQ
275
276config XTENSA_MX
277	bool
278	select IRQ_DOMAIN
279	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
280
281config XILINX_INTC
282	bool
283	select IRQ_DOMAIN
284
285config IRQ_CROSSBAR
286	bool
287	help
288	  Support for a CROSSBAR ip that precedes the main interrupt controller.
289	  The primary irqchip invokes the crossbar's callback which inturn allocates
290	  a free irq and configures the IP. Thus the peripheral interrupts are
291	  routed to one of the free irqchip interrupt lines.
292
293config KEYSTONE_IRQ
294	tristate "Keystone 2 IRQ controller IP"
295	depends on ARCH_KEYSTONE
296	help
297		Support for Texas Instruments Keystone 2 IRQ controller IP which
298		is part of the Keystone 2 IPC mechanism
299
300config MIPS_GIC
301	bool
302	select GENERIC_IRQ_IPI
303	select MIPS_CM
304
305config INGENIC_IRQ
306	bool
307	depends on MACH_INGENIC
308	default y
309
310config INGENIC_TCU_IRQ
311	bool "Ingenic JZ47xx TCU interrupt controller"
312	default MACH_INGENIC
313	depends on MIPS || COMPILE_TEST
314	select MFD_SYSCON
315	select GENERIC_IRQ_CHIP
316	help
317	  Support for interrupts in the Timer/Counter Unit (TCU) of the Ingenic
318	  JZ47xx SoCs.
319
320	  If unsure, say N.
321
322config RENESAS_H8300H_INTC
323        bool
324	select IRQ_DOMAIN
325
326config RENESAS_H8S_INTC
327	bool "Renesas H8S Interrupt Controller Support" if COMPILE_TEST
328	select IRQ_DOMAIN
329	help
330	  Enable support for the Renesas H8/300 Interrupt Controller, as found
331	  on Renesas H8S SoCs.
332
333config IMX_GPCV2
334	bool
335	select IRQ_DOMAIN
336	help
337	  Enables the wakeup IRQs for IMX platforms with GPCv2 block
338
339config IRQ_MXS
340	def_bool y if MACH_ASM9260 || ARCH_MXS
341	select IRQ_DOMAIN
342	select STMP_DEVICE
343
344config MSCC_OCELOT_IRQ
345	bool
346	select IRQ_DOMAIN
347	select GENERIC_IRQ_CHIP
348
349config MVEBU_GICP
350	bool
351
352config MVEBU_ICU
353	bool
354
355config MVEBU_ODMI
356	bool
357	select GENERIC_MSI_IRQ_DOMAIN
358
359config MVEBU_PIC
360	bool
361
362config MVEBU_SEI
363        bool
364
365config LS_EXTIRQ
366	def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE
367	select MFD_SYSCON
368
369config LS_SCFG_MSI
370	def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE
371	depends on PCI && PCI_MSI
372
373config PARTITION_PERCPU
374	bool
375
376config STM32_EXTI
377	bool
378	select IRQ_DOMAIN
379	select GENERIC_IRQ_CHIP
380
381config QCOM_IRQ_COMBINER
382	bool "QCOM IRQ combiner support"
383	depends on ARCH_QCOM && ACPI
384	select IRQ_DOMAIN_HIERARCHY
385	help
386	  Say yes here to add support for the IRQ combiner devices embedded
387	  in Qualcomm Technologies chips.
388
389config IRQ_UNIPHIER_AIDET
390	bool "UniPhier AIDET support" if COMPILE_TEST
391	depends on ARCH_UNIPHIER || COMPILE_TEST
392	default ARCH_UNIPHIER
393	select IRQ_DOMAIN_HIERARCHY
394	help
395	  Support for the UniPhier AIDET (ARM Interrupt Detector).
396
397config MESON_IRQ_GPIO
398       bool "Meson GPIO Interrupt Multiplexer"
399       depends on ARCH_MESON
400       select IRQ_DOMAIN_HIERARCHY
401       help
402         Support Meson SoC Family GPIO Interrupt Multiplexer
403
404config GOLDFISH_PIC
405       bool "Goldfish programmable interrupt controller"
406       depends on MIPS && (GOLDFISH || COMPILE_TEST)
407       select IRQ_DOMAIN
408       help
409         Say yes here to enable Goldfish interrupt controller driver used
410         for Goldfish based virtual platforms.
411
412config QCOM_PDC
413	bool "QCOM PDC"
414	depends on ARCH_QCOM
415	select IRQ_DOMAIN_HIERARCHY
416	help
417	  Power Domain Controller driver to manage and configure wakeup
418	  IRQs for Qualcomm Technologies Inc (QTI) mobile chips.
419
420config CSKY_MPINTC
421	bool
422	depends on CSKY
423	help
424	  Say yes here to enable C-SKY SMP interrupt controller driver used
425	  for C-SKY SMP system.
426	  In fact it's not mmio map in hardware and it uses ld/st to visit the
427	  controller's register inside CPU.
428
429config CSKY_APB_INTC
430	bool "C-SKY APB Interrupt Controller"
431	depends on CSKY
432	help
433	  Say yes here to enable C-SKY APB interrupt controller driver used
434	  by C-SKY single core SOC system. It uses mmio map apb-bus to visit
435	  the controller's register.
436
437config IMX_IRQSTEER
438	bool "i.MX IRQSTEER support"
439	depends on ARCH_MXC || COMPILE_TEST
440	default ARCH_MXC
441	select IRQ_DOMAIN
442	help
443	  Support for the i.MX IRQSTEER interrupt multiplexer/remapper.
444
445config IMX_INTMUX
446	bool "i.MX INTMUX support" if COMPILE_TEST
447	default y if ARCH_MXC
448	select IRQ_DOMAIN
449	help
450	  Support for the i.MX INTMUX interrupt multiplexer.
451
452config LS1X_IRQ
453	bool "Loongson-1 Interrupt Controller"
454	depends on MACH_LOONGSON32
455	default y
456	select IRQ_DOMAIN
457	select GENERIC_IRQ_CHIP
458	help
459	  Support for the Loongson-1 platform Interrupt Controller.
460
461config TI_SCI_INTR_IRQCHIP
462	bool
463	depends on TI_SCI_PROTOCOL
464	select IRQ_DOMAIN_HIERARCHY
465	help
466	  This enables the irqchip driver support for K3 Interrupt router
467	  over TI System Control Interface available on some new TI's SoCs.
468	  If you wish to use interrupt router irq resources managed by the
469	  TI System Controller, say Y here. Otherwise, say N.
470
471config TI_SCI_INTA_IRQCHIP
472	bool
473	depends on TI_SCI_PROTOCOL
474	select IRQ_DOMAIN_HIERARCHY
475	select TI_SCI_INTA_MSI_DOMAIN
476	help
477	  This enables the irqchip driver support for K3 Interrupt aggregator
478	  over TI System Control Interface available on some new TI's SoCs.
479	  If you wish to use interrupt aggregator irq resources managed by the
480	  TI System Controller, say Y here. Otherwise, say N.
481
482config TI_PRUSS_INTC
483	tristate
484	depends on TI_PRUSS
485	default TI_PRUSS
486	select IRQ_DOMAIN
487	help
488	  This enables support for the PRU-ICSS Local Interrupt Controller
489	  present within a PRU-ICSS subsystem present on various TI SoCs.
490	  The PRUSS INTC enables various interrupts to be routed to multiple
491	  different processors within the SoC.
492
493config RISCV_INTC
494	bool "RISC-V Local Interrupt Controller"
495	depends on RISCV
496	default y
497	help
498	   This enables support for the per-HART local interrupt controller
499	   found in standard RISC-V systems.  The per-HART local interrupt
500	   controller handles timer interrupts, software interrupts, and
501	   hardware interrupts. Without a per-HART local interrupt controller,
502	   a RISC-V system will be unable to handle any interrupts.
503
504	   If you don't know what to do here, say Y.
505
506config SIFIVE_PLIC
507	bool "SiFive Platform-Level Interrupt Controller"
508	depends on RISCV
509	select IRQ_DOMAIN_HIERARCHY
510	help
511	   This enables support for the PLIC chip found in SiFive (and
512	   potentially other) RISC-V systems.  The PLIC controls devices
513	   interrupts and connects them to each core's local interrupt
514	   controller.  Aside from timer and software interrupts, all other
515	   interrupt sources are subordinate to the PLIC.
516
517	   If you don't know what to do here, say Y.
518
519config EXYNOS_IRQ_COMBINER
520	bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST
521	depends on (ARCH_EXYNOS && ARM) || COMPILE_TEST
522	help
523	  Say yes here to add support for the IRQ combiner devices embedded
524	  in Samsung Exynos chips.
525
526config LOONGSON_LIOINTC
527	bool "Loongson Local I/O Interrupt Controller"
528	depends on MACH_LOONGSON64
529	default y
530	select IRQ_DOMAIN
531	select GENERIC_IRQ_CHIP
532	help
533	  Support for the Loongson Local I/O Interrupt Controller.
534
535config LOONGSON_HTPIC
536	bool "Loongson3 HyperTransport PIC Controller"
537	depends on MACH_LOONGSON64
538	default y
539	select IRQ_DOMAIN
540	select GENERIC_IRQ_CHIP
541	help
542	  Support for the Loongson-3 HyperTransport PIC Controller.
543
544config LOONGSON_HTVEC
545	bool "Loongson3 HyperTransport Interrupt Vector Controller"
546	depends on MACH_LOONGSON64
547	default MACH_LOONGSON64
548	select IRQ_DOMAIN_HIERARCHY
549	help
550	  Support for the Loongson3 HyperTransport Interrupt Vector Controller.
551
552config LOONGSON_PCH_PIC
553	bool "Loongson PCH PIC Controller"
554	depends on MACH_LOONGSON64 || COMPILE_TEST
555	default MACH_LOONGSON64
556	select IRQ_DOMAIN_HIERARCHY
557	select IRQ_FASTEOI_HIERARCHY_HANDLERS
558	help
559	  Support for the Loongson PCH PIC Controller.
560
561config LOONGSON_PCH_MSI
562	bool "Loongson PCH MSI Controller"
563	depends on MACH_LOONGSON64 || COMPILE_TEST
564	depends on PCI
565	default MACH_LOONGSON64
566	select IRQ_DOMAIN_HIERARCHY
567	select PCI_MSI
568	help
569	  Support for the Loongson PCH MSI Controller.
570
571config MST_IRQ
572	bool "MStar Interrupt Controller"
573	depends on ARCH_MEDIATEK || ARCH_MSTARV7 || COMPILE_TEST
574	default ARCH_MEDIATEK
575	select IRQ_DOMAIN
576	select IRQ_DOMAIN_HIERARCHY
577	help
578	  Support MStar Interrupt Controller.
579
580endmenu
581