xref: /openbmc/linux/drivers/irqchip/Kconfig (revision b830f94f)
1# SPDX-License-Identifier: GPL-2.0-only
2menu "IRQ chip support"
3
4config IRQCHIP
5	def_bool y
6	depends on OF_IRQ
7
8config ARM_GIC
9	bool
10	select IRQ_DOMAIN_HIERARCHY
11	select GENERIC_IRQ_MULTI_HANDLER
12	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
13
14config ARM_GIC_PM
15	bool
16	depends on PM
17	select ARM_GIC
18
19config ARM_GIC_MAX_NR
20	int
21	depends on ARM_GIC
22	default 2 if ARCH_REALVIEW
23	default 1
24
25config ARM_GIC_V2M
26	bool
27	depends on PCI
28	select ARM_GIC
29	select PCI_MSI
30
31config GIC_NON_BANKED
32	bool
33
34config ARM_GIC_V3
35	bool
36	select GENERIC_IRQ_MULTI_HANDLER
37	select IRQ_DOMAIN_HIERARCHY
38	select PARTITION_PERCPU
39	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
40
41config ARM_GIC_V3_ITS
42	bool
43	select GENERIC_MSI_IRQ_DOMAIN
44	default ARM_GIC_V3
45
46config ARM_GIC_V3_ITS_PCI
47	bool
48	depends on ARM_GIC_V3_ITS
49	depends on PCI
50	depends on PCI_MSI
51	default ARM_GIC_V3_ITS
52
53config ARM_GIC_V3_ITS_FSL_MC
54	bool
55	depends on ARM_GIC_V3_ITS
56	depends on FSL_MC_BUS
57	default ARM_GIC_V3_ITS
58
59config ARM_NVIC
60	bool
61	select IRQ_DOMAIN_HIERARCHY
62	select GENERIC_IRQ_CHIP
63
64config ARM_VIC
65	bool
66	select IRQ_DOMAIN
67	select GENERIC_IRQ_MULTI_HANDLER
68
69config ARM_VIC_NR
70	int
71	default 4 if ARCH_S5PV210
72	default 2
73	depends on ARM_VIC
74	help
75	  The maximum number of VICs available in the system, for
76	  power management.
77
78config ARMADA_370_XP_IRQ
79	bool
80	select GENERIC_IRQ_CHIP
81	select PCI_MSI if PCI
82	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
83
84config ALPINE_MSI
85	bool
86	depends on PCI
87	select PCI_MSI
88	select GENERIC_IRQ_CHIP
89
90config AL_FIC
91	bool "Amazon's Annapurna Labs Fabric Interrupt Controller"
92	depends on OF || COMPILE_TEST
93	select GENERIC_IRQ_CHIP
94	select IRQ_DOMAIN
95	help
96	  Support Amazon's Annapurna Labs Fabric Interrupt Controller.
97
98config ATMEL_AIC_IRQ
99	bool
100	select GENERIC_IRQ_CHIP
101	select IRQ_DOMAIN
102	select GENERIC_IRQ_MULTI_HANDLER
103	select SPARSE_IRQ
104
105config ATMEL_AIC5_IRQ
106	bool
107	select GENERIC_IRQ_CHIP
108	select IRQ_DOMAIN
109	select GENERIC_IRQ_MULTI_HANDLER
110	select SPARSE_IRQ
111
112config I8259
113	bool
114	select IRQ_DOMAIN
115
116config BCM6345_L1_IRQ
117	bool
118	select GENERIC_IRQ_CHIP
119	select IRQ_DOMAIN
120	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
121
122config BCM7038_L1_IRQ
123	bool
124	select GENERIC_IRQ_CHIP
125	select IRQ_DOMAIN
126	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
127
128config BCM7120_L2_IRQ
129	bool
130	select GENERIC_IRQ_CHIP
131	select IRQ_DOMAIN
132
133config BRCMSTB_L2_IRQ
134	bool
135	select GENERIC_IRQ_CHIP
136	select IRQ_DOMAIN
137
138config DAVINCI_AINTC
139	bool
140	select GENERIC_IRQ_CHIP
141	select IRQ_DOMAIN
142
143config DAVINCI_CP_INTC
144	bool
145	select GENERIC_IRQ_CHIP
146	select IRQ_DOMAIN
147
148config DW_APB_ICTL
149	bool
150	select GENERIC_IRQ_CHIP
151	select IRQ_DOMAIN
152
153config FARADAY_FTINTC010
154	bool
155	select IRQ_DOMAIN
156	select GENERIC_IRQ_MULTI_HANDLER
157	select SPARSE_IRQ
158
159config HISILICON_IRQ_MBIGEN
160	bool
161	select ARM_GIC_V3
162	select ARM_GIC_V3_ITS
163
164config IMGPDC_IRQ
165	bool
166	select GENERIC_IRQ_CHIP
167	select IRQ_DOMAIN
168
169config IXP4XX_IRQ
170	bool
171	select IRQ_DOMAIN
172	select GENERIC_IRQ_MULTI_HANDLER
173	select SPARSE_IRQ
174
175config MADERA_IRQ
176	tristate
177
178config IRQ_MIPS_CPU
179	bool
180	select GENERIC_IRQ_CHIP
181	select GENERIC_IRQ_IPI if SYS_SUPPORTS_MULTITHREADING
182	select IRQ_DOMAIN
183	select IRQ_DOMAIN_HIERARCHY if GENERIC_IRQ_IPI
184	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
185
186config CLPS711X_IRQCHIP
187	bool
188	depends on ARCH_CLPS711X
189	select IRQ_DOMAIN
190	select GENERIC_IRQ_MULTI_HANDLER
191	select SPARSE_IRQ
192	default y
193
194config OMPIC
195	bool
196
197config OR1K_PIC
198	bool
199	select IRQ_DOMAIN
200
201config OMAP_IRQCHIP
202	bool
203	select GENERIC_IRQ_CHIP
204	select IRQ_DOMAIN
205
206config ORION_IRQCHIP
207	bool
208	select IRQ_DOMAIN
209	select GENERIC_IRQ_MULTI_HANDLER
210
211config PIC32_EVIC
212	bool
213	select GENERIC_IRQ_CHIP
214	select IRQ_DOMAIN
215
216config JCORE_AIC
217	bool "J-Core integrated AIC" if COMPILE_TEST
218	depends on OF
219	select IRQ_DOMAIN
220	help
221	  Support for the J-Core integrated AIC.
222
223config RDA_INTC
224	bool
225	select IRQ_DOMAIN
226
227config RENESAS_INTC_IRQPIN
228	bool "Renesas INTC External IRQ Pin Support" if COMPILE_TEST
229	select IRQ_DOMAIN
230	help
231	  Enable support for the Renesas Interrupt Controller for external
232	  interrupt pins, as found on SH/R-Mobile and R-Car Gen1 SoCs.
233
234config RENESAS_IRQC
235	bool "Renesas R-Mobile APE6 and R-Car IRQC support" if COMPILE_TEST
236	select GENERIC_IRQ_CHIP
237	select IRQ_DOMAIN
238	help
239	  Enable support for the Renesas Interrupt Controller for external
240	  devices, as found on R-Mobile APE6, R-Car Gen2, and R-Car Gen3 SoCs.
241
242config RENESAS_RZA1_IRQC
243	bool "Renesas RZ/A1 IRQC support" if COMPILE_TEST
244	select IRQ_DOMAIN_HIERARCHY
245	help
246	  Enable support for the Renesas RZ/A1 Interrupt Controller, to use up
247	  to 8 external interrupts with configurable sense select.
248
249config ST_IRQCHIP
250	bool
251	select REGMAP
252	select MFD_SYSCON
253	help
254	  Enables SysCfg Controlled IRQs on STi based platforms.
255
256config TANGO_IRQ
257	bool
258	select IRQ_DOMAIN
259	select GENERIC_IRQ_CHIP
260
261config TB10X_IRQC
262	bool
263	select IRQ_DOMAIN
264	select GENERIC_IRQ_CHIP
265
266config TS4800_IRQ
267	tristate "TS-4800 IRQ controller"
268	select IRQ_DOMAIN
269	depends on HAS_IOMEM
270	depends on SOC_IMX51 || COMPILE_TEST
271	help
272	  Support for the TS-4800 FPGA IRQ controller
273
274config VERSATILE_FPGA_IRQ
275	bool
276	select IRQ_DOMAIN
277
278config VERSATILE_FPGA_IRQ_NR
279       int
280       default 4
281       depends on VERSATILE_FPGA_IRQ
282
283config XTENSA_MX
284	bool
285	select IRQ_DOMAIN
286	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
287
288config XILINX_INTC
289	bool
290	select IRQ_DOMAIN
291
292config IRQ_CROSSBAR
293	bool
294	help
295	  Support for a CROSSBAR ip that precedes the main interrupt controller.
296	  The primary irqchip invokes the crossbar's callback which inturn allocates
297	  a free irq and configures the IP. Thus the peripheral interrupts are
298	  routed to one of the free irqchip interrupt lines.
299
300config KEYSTONE_IRQ
301	tristate "Keystone 2 IRQ controller IP"
302	depends on ARCH_KEYSTONE
303	help
304		Support for Texas Instruments Keystone 2 IRQ controller IP which
305		is part of the Keystone 2 IPC mechanism
306
307config MIPS_GIC
308	bool
309	select GENERIC_IRQ_IPI
310	select IRQ_DOMAIN_HIERARCHY
311	select MIPS_CM
312
313config INGENIC_IRQ
314	bool
315	depends on MACH_INGENIC
316	default y
317
318config RENESAS_H8300H_INTC
319        bool
320	select IRQ_DOMAIN
321
322config RENESAS_H8S_INTC
323	bool "Renesas H8S Interrupt Controller Support" if COMPILE_TEST
324	select IRQ_DOMAIN
325	help
326	  Enable support for the Renesas H8/300 Interrupt Controller, as found
327	  on Renesas H8S SoCs.
328
329config IMX_GPCV2
330	bool
331	select IRQ_DOMAIN
332	help
333	  Enables the wakeup IRQs for IMX platforms with GPCv2 block
334
335config IRQ_MXS
336	def_bool y if MACH_ASM9260 || ARCH_MXS
337	select IRQ_DOMAIN
338	select STMP_DEVICE
339
340config MSCC_OCELOT_IRQ
341	bool
342	select IRQ_DOMAIN
343	select GENERIC_IRQ_CHIP
344
345config MVEBU_GICP
346	bool
347
348config MVEBU_ICU
349	bool
350
351config MVEBU_ODMI
352	bool
353	select GENERIC_MSI_IRQ_DOMAIN
354
355config MVEBU_PIC
356	bool
357
358config MVEBU_SEI
359        bool
360
361config LS_SCFG_MSI
362	def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE
363	depends on PCI && PCI_MSI
364
365config PARTITION_PERCPU
366	bool
367
368config EZNPS_GIC
369	bool "NPS400 Global Interrupt Manager (GIM)"
370	depends on ARC || (COMPILE_TEST && !64BIT)
371	select IRQ_DOMAIN
372	help
373	  Support the EZchip NPS400 global interrupt controller
374
375config STM32_EXTI
376	bool
377	select IRQ_DOMAIN
378	select GENERIC_IRQ_CHIP
379
380config QCOM_IRQ_COMBINER
381	bool "QCOM IRQ combiner support"
382	depends on ARCH_QCOM && ACPI
383	select IRQ_DOMAIN_HIERARCHY
384	help
385	  Say yes here to add support for the IRQ combiner devices embedded
386	  in Qualcomm Technologies chips.
387
388config IRQ_UNIPHIER_AIDET
389	bool "UniPhier AIDET support" if COMPILE_TEST
390	depends on ARCH_UNIPHIER || COMPILE_TEST
391	default ARCH_UNIPHIER
392	select IRQ_DOMAIN_HIERARCHY
393	help
394	  Support for the UniPhier AIDET (ARM Interrupt Detector).
395
396config MESON_IRQ_GPIO
397       bool "Meson GPIO Interrupt Multiplexer"
398       depends on ARCH_MESON
399       select IRQ_DOMAIN_HIERARCHY
400       help
401         Support Meson SoC Family GPIO Interrupt Multiplexer
402
403config GOLDFISH_PIC
404       bool "Goldfish programmable interrupt controller"
405       depends on MIPS && (GOLDFISH || COMPILE_TEST)
406       select IRQ_DOMAIN
407       help
408         Say yes here to enable Goldfish interrupt controller driver used
409         for Goldfish based virtual platforms.
410
411config QCOM_PDC
412	bool "QCOM PDC"
413	depends on ARCH_QCOM
414	select IRQ_DOMAIN_HIERARCHY
415	help
416	  Power Domain Controller driver to manage and configure wakeup
417	  IRQs for Qualcomm Technologies Inc (QTI) mobile chips.
418
419config CSKY_MPINTC
420	bool "C-SKY Multi Processor Interrupt Controller"
421	depends on CSKY
422	help
423	  Say yes here to enable C-SKY SMP interrupt controller driver used
424	  for C-SKY SMP system.
425	  In fact it's not mmio map in hw and it use ld/st to visit the
426	  controller's register inside CPU.
427
428config CSKY_APB_INTC
429	bool "C-SKY APB Interrupt Controller"
430	depends on CSKY
431	help
432	  Say yes here to enable C-SKY APB interrupt controller driver used
433	  by C-SKY single core SOC system. It use mmio map apb-bus to visit
434	  the controller's register.
435
436config IMX_IRQSTEER
437	bool "i.MX IRQSTEER support"
438	depends on ARCH_MXC || COMPILE_TEST
439	default ARCH_MXC
440	select IRQ_DOMAIN
441	help
442	  Support for the i.MX IRQSTEER interrupt multiplexer/remapper.
443
444config LS1X_IRQ
445	bool "Loongson-1 Interrupt Controller"
446	depends on MACH_LOONGSON32
447	default y
448	select IRQ_DOMAIN
449	select GENERIC_IRQ_CHIP
450	help
451	  Support for the Loongson-1 platform Interrupt Controller.
452
453config TI_SCI_INTR_IRQCHIP
454	bool
455	depends on TI_SCI_PROTOCOL
456	select IRQ_DOMAIN_HIERARCHY
457	help
458	  This enables the irqchip driver support for K3 Interrupt router
459	  over TI System Control Interface available on some new TI's SoCs.
460	  If you wish to use interrupt router irq resources managed by the
461	  TI System Controller, say Y here. Otherwise, say N.
462
463config TI_SCI_INTA_IRQCHIP
464	bool
465	depends on TI_SCI_PROTOCOL
466	select IRQ_DOMAIN_HIERARCHY
467	select TI_SCI_INTA_MSI_DOMAIN
468	help
469	  This enables the irqchip driver support for K3 Interrupt aggregator
470	  over TI System Control Interface available on some new TI's SoCs.
471	  If you wish to use interrupt aggregator irq resources managed by the
472	  TI System Controller, say Y here. Otherwise, say N.
473
474endmenu
475
476config SIFIVE_PLIC
477	bool "SiFive Platform-Level Interrupt Controller"
478	depends on RISCV
479	help
480	   This enables support for the PLIC chip found in SiFive (and
481	   potentially other) RISC-V systems.  The PLIC controls devices
482	   interrupts and connects them to each core's local interrupt
483	   controller.  Aside from timer and software interrupts, all other
484	   interrupt sources are subordinate to the PLIC.
485
486	   If you don't know what to do here, say Y.
487