xref: /openbmc/linux/drivers/ipack/carriers/tpci200.h (revision a2cce7a9)
1 /**
2  * tpci200.h
3  *
4  * driver for the carrier TEWS TPCI-200
5  *
6  * Copyright (C) 2009-2012 CERN (www.cern.ch)
7  * Author: Nicolas Serafini, EIC2 SA
8  * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
9  *
10  * This program is free software; you can redistribute it and/or modify it
11  * under the terms of the GNU General Public License as published by the Free
12  * Software Foundation; version 2 of the License.
13  */
14 
15 #ifndef _TPCI200_H_
16 #define _TPCI200_H_
17 
18 #include <linux/limits.h>
19 #include <linux/pci.h>
20 #include <linux/spinlock.h>
21 #include <linux/swab.h>
22 #include <linux/io.h>
23 #include <linux/ipack.h>
24 
25 #define TPCI200_NB_SLOT               0x4
26 #define TPCI200_NB_BAR                0x6
27 
28 #define TPCI200_VENDOR_ID             0x1498
29 #define TPCI200_DEVICE_ID             0x30C8
30 #define TPCI200_SUBVENDOR_ID          0x1498
31 #define TPCI200_SUBDEVICE_ID          0x300A
32 
33 #define TPCI200_CFG_MEM_BAR           0
34 #define TPCI200_IP_INTERFACE_BAR      2
35 #define TPCI200_IO_ID_INT_SPACES_BAR  3
36 #define TPCI200_MEM16_SPACE_BAR       4
37 #define TPCI200_MEM8_SPACE_BAR        5
38 
39 struct tpci200_regs {
40 	__le16	revision;
41 	/* writes to control should occur with the mutex held to protect
42 	 * read-modify-write operations */
43 	__le16  control[4];
44 	__le16	reset;
45 	__le16	status;
46 	u8	reserved[242];
47 } __packed;
48 
49 #define TPCI200_IFACE_SIZE            0x100
50 
51 #define TPCI200_IO_SPACE_OFF          0x0000
52 #define TPCI200_IO_SPACE_INTERVAL     0x0100
53 #define TPCI200_IO_SPACE_SIZE         0x0080
54 #define TPCI200_ID_SPACE_OFF          0x0080
55 #define TPCI200_ID_SPACE_INTERVAL     0x0100
56 #define TPCI200_ID_SPACE_SIZE         0x0040
57 #define TPCI200_INT_SPACE_OFF         0x00C0
58 #define TPCI200_INT_SPACE_INTERVAL    0x0100
59 #define TPCI200_INT_SPACE_SIZE        0x0040
60 #define TPCI200_IOIDINT_SIZE          0x0400
61 
62 #define TPCI200_MEM8_SPACE_INTERVAL   0x00400000
63 #define TPCI200_MEM8_SPACE_SIZE       0x00400000
64 #define TPCI200_MEM16_SPACE_INTERVAL  0x00800000
65 #define TPCI200_MEM16_SPACE_SIZE      0x00800000
66 
67 /* control field in tpci200_regs */
68 #define TPCI200_INT0_EN               0x0040
69 #define TPCI200_INT1_EN               0x0080
70 #define TPCI200_INT0_EDGE             0x0010
71 #define TPCI200_INT1_EDGE             0x0020
72 #define TPCI200_ERR_INT_EN            0x0008
73 #define TPCI200_TIME_INT_EN           0x0004
74 #define TPCI200_RECOVER_EN            0x0002
75 #define TPCI200_CLK32                 0x0001
76 
77 /* reset field in tpci200_regs */
78 #define TPCI200_A_RESET               0x0001
79 #define TPCI200_B_RESET               0x0002
80 #define TPCI200_C_RESET               0x0004
81 #define TPCI200_D_RESET               0x0008
82 
83 /* status field in tpci200_regs */
84 #define TPCI200_A_TIMEOUT             0x1000
85 #define TPCI200_B_TIMEOUT             0x2000
86 #define TPCI200_C_TIMEOUT             0x4000
87 #define TPCI200_D_TIMEOUT             0x8000
88 
89 #define TPCI200_A_ERROR               0x0100
90 #define TPCI200_B_ERROR               0x0200
91 #define TPCI200_C_ERROR               0x0400
92 #define TPCI200_D_ERROR               0x0800
93 
94 #define TPCI200_A_INT0                0x0001
95 #define TPCI200_A_INT1                0x0002
96 #define TPCI200_B_INT0                0x0004
97 #define TPCI200_B_INT1                0x0008
98 #define TPCI200_C_INT0                0x0010
99 #define TPCI200_C_INT1                0x0020
100 #define TPCI200_D_INT0                0x0040
101 #define TPCI200_D_INT1                0x0080
102 
103 #define TPCI200_SLOT_INT_MASK         0x00FF
104 
105 /* PCI Configuration registers. The PCI bridge is a PLX Technology PCI9030. */
106 #define LAS1_DESC		      0x2C
107 #define LAS2_DESC		      0x30
108 
109 /* Bits in the LAS?_DESC registers */
110 #define LAS_BIT_BIGENDIAN	      24
111 
112 #define VME_IOID_SPACE  "IOID"
113 #define VME_MEM_SPACE  "MEM"
114 
115 /**
116  * struct slot_irq - slot IRQ definition.
117  * @vector	Vector number
118  * @handler	Handler called when IRQ arrives
119  * @arg		Handler argument
120  *
121  */
122 struct slot_irq {
123 	struct ipack_device *holder;
124 	int		vector;
125 	irqreturn_t	(*handler)(void *);
126 	void		*arg;
127 };
128 
129 /**
130  * struct tpci200_slot - data specific to the tpci200 slot.
131  * @slot_id	Slot identification gived to external interface
132  * @irq		Slot IRQ infos
133  * @io_phys	IO physical base address register of the slot
134  * @id_phys	ID physical base address register of the slot
135  * @int_phys	INT physical base address register of the slot
136  * @mem_phys	MEM physical base address register of the slot
137  *
138  */
139 struct tpci200_slot {
140 	struct slot_irq	    *irq;
141 };
142 
143 /**
144  * struct tpci200_infos - informations specific of the TPCI200 tpci200.
145  * @pci_dev		PCI device
146  * @interface_regs	Pointer to IP interface space (Bar 2)
147  * @ioidint_space	Pointer to IP ID, IO and INT space (Bar 3)
148  * @mem8_space		Pointer to MEM space (Bar 4)
149  *
150  */
151 struct tpci200_infos {
152 	struct pci_dev			*pdev;
153 	struct pci_device_id		*id_table;
154 	struct tpci200_regs __iomem	*interface_regs;
155 	void __iomem			*cfg_regs;
156 	struct ipack_bus_device		*ipack_bus;
157 };
158 struct tpci200_board {
159 	unsigned int		number;
160 	struct mutex		mutex;
161 	spinlock_t		regs_lock;
162 	struct tpci200_slot	*slots;
163 	struct tpci200_infos	*info;
164 	phys_addr_t             mod_mem[IPACK_SPACE_COUNT];
165 };
166 
167 #endif /* _TPCI200_H_ */
168