xref: /openbmc/linux/drivers/ipack/carriers/tpci200.h (revision 5b828263)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * driver for the carrier TEWS TPCI-200
4  *
5  * Copyright (C) 2009-2012 CERN (www.cern.ch)
6  * Author: Nicolas Serafini, EIC2 SA
7  * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
8  */
9 
10 #ifndef _TPCI200_H_
11 #define _TPCI200_H_
12 
13 #include <linux/limits.h>
14 #include <linux/pci.h>
15 #include <linux/spinlock.h>
16 #include <linux/swab.h>
17 #include <linux/io.h>
18 #include <linux/ipack.h>
19 
20 #define TPCI200_NB_SLOT               0x4
21 #define TPCI200_NB_BAR                0x6
22 
23 #define TPCI200_VENDOR_ID             0x1498
24 #define TPCI200_DEVICE_ID             0x30C8
25 #define TPCI200_SUBVENDOR_ID          0x1498
26 #define TPCI200_SUBDEVICE_ID          0x300A
27 
28 #define TPCI200_CFG_MEM_BAR           0
29 #define TPCI200_IP_INTERFACE_BAR      2
30 #define TPCI200_IO_ID_INT_SPACES_BAR  3
31 #define TPCI200_MEM16_SPACE_BAR       4
32 #define TPCI200_MEM8_SPACE_BAR        5
33 
34 struct tpci200_regs {
35 	__le16	revision;
36 	/* writes to control should occur with the mutex held to protect
37 	 * read-modify-write operations */
38 	__le16  control[4];
39 	__le16	reset;
40 	__le16	status;
41 	u8	reserved[242];
42 } __packed;
43 
44 #define TPCI200_IFACE_SIZE            0x100
45 
46 #define TPCI200_IO_SPACE_OFF          0x0000
47 #define TPCI200_IO_SPACE_INTERVAL     0x0100
48 #define TPCI200_IO_SPACE_SIZE         0x0080
49 #define TPCI200_ID_SPACE_OFF          0x0080
50 #define TPCI200_ID_SPACE_INTERVAL     0x0100
51 #define TPCI200_ID_SPACE_SIZE         0x0040
52 #define TPCI200_INT_SPACE_OFF         0x00C0
53 #define TPCI200_INT_SPACE_INTERVAL    0x0100
54 #define TPCI200_INT_SPACE_SIZE        0x0040
55 #define TPCI200_IOIDINT_SIZE          0x0400
56 
57 #define TPCI200_MEM8_SPACE_INTERVAL   0x00400000
58 #define TPCI200_MEM8_SPACE_SIZE       0x00400000
59 #define TPCI200_MEM16_SPACE_INTERVAL  0x00800000
60 #define TPCI200_MEM16_SPACE_SIZE      0x00800000
61 
62 /* control field in tpci200_regs */
63 #define TPCI200_INT0_EN               0x0040
64 #define TPCI200_INT1_EN               0x0080
65 #define TPCI200_INT0_EDGE             0x0010
66 #define TPCI200_INT1_EDGE             0x0020
67 #define TPCI200_ERR_INT_EN            0x0008
68 #define TPCI200_TIME_INT_EN           0x0004
69 #define TPCI200_RECOVER_EN            0x0002
70 #define TPCI200_CLK32                 0x0001
71 
72 /* reset field in tpci200_regs */
73 #define TPCI200_A_RESET               0x0001
74 #define TPCI200_B_RESET               0x0002
75 #define TPCI200_C_RESET               0x0004
76 #define TPCI200_D_RESET               0x0008
77 
78 /* status field in tpci200_regs */
79 #define TPCI200_A_TIMEOUT             0x1000
80 #define TPCI200_B_TIMEOUT             0x2000
81 #define TPCI200_C_TIMEOUT             0x4000
82 #define TPCI200_D_TIMEOUT             0x8000
83 
84 #define TPCI200_A_ERROR               0x0100
85 #define TPCI200_B_ERROR               0x0200
86 #define TPCI200_C_ERROR               0x0400
87 #define TPCI200_D_ERROR               0x0800
88 
89 #define TPCI200_A_INT0                0x0001
90 #define TPCI200_A_INT1                0x0002
91 #define TPCI200_B_INT0                0x0004
92 #define TPCI200_B_INT1                0x0008
93 #define TPCI200_C_INT0                0x0010
94 #define TPCI200_C_INT1                0x0020
95 #define TPCI200_D_INT0                0x0040
96 #define TPCI200_D_INT1                0x0080
97 
98 #define TPCI200_SLOT_INT_MASK         0x00FF
99 
100 /* PCI Configuration registers. The PCI bridge is a PLX Technology PCI9030. */
101 #define LAS1_DESC		      0x2C
102 #define LAS2_DESC		      0x30
103 
104 /* Bits in the LAS?_DESC registers */
105 #define LAS_BIT_BIGENDIAN	      24
106 
107 #define VME_IOID_SPACE  "IOID"
108 #define VME_MEM_SPACE  "MEM"
109 
110 /**
111  * struct slot_irq - slot IRQ definition.
112  * @vector	Vector number
113  * @handler	Handler called when IRQ arrives
114  * @arg		Handler argument
115  *
116  */
117 struct slot_irq {
118 	struct ipack_device *holder;
119 	int		vector;
120 	irqreturn_t	(*handler)(void *);
121 	void		*arg;
122 };
123 
124 /**
125  * struct tpci200_slot - data specific to the tpci200 slot.
126  * @slot_id	Slot identification gived to external interface
127  * @irq		Slot IRQ infos
128  * @io_phys	IO physical base address register of the slot
129  * @id_phys	ID physical base address register of the slot
130  * @int_phys	INT physical base address register of the slot
131  * @mem_phys	MEM physical base address register of the slot
132  *
133  */
134 struct tpci200_slot {
135 	struct slot_irq	    *irq;
136 };
137 
138 /**
139  * struct tpci200_infos - informations specific of the TPCI200 tpci200.
140  * @pci_dev		PCI device
141  * @interface_regs	Pointer to IP interface space (Bar 2)
142  * @ioidint_space	Pointer to IP ID, IO and INT space (Bar 3)
143  * @mem8_space		Pointer to MEM space (Bar 4)
144  *
145  */
146 struct tpci200_infos {
147 	struct pci_dev			*pdev;
148 	struct pci_device_id		*id_table;
149 	struct tpci200_regs __iomem	*interface_regs;
150 	void __iomem			*cfg_regs;
151 	struct ipack_bus_device		*ipack_bus;
152 };
153 struct tpci200_board {
154 	unsigned int		number;
155 	struct mutex		mutex;
156 	spinlock_t		regs_lock;
157 	struct tpci200_slot	*slots;
158 	struct tpci200_infos	*info;
159 	phys_addr_t             mod_mem[IPACK_SPACE_COUNT];
160 };
161 
162 #endif /* _TPCI200_H_ */
163