1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Copyright (C) 2020 Linaro Ltd
4  */
5 
6 #ifndef __DRIVERS_INTERCONNECT_QCOM_ICC_RPM_H
7 #define __DRIVERS_INTERCONNECT_QCOM_ICC_RPM_H
8 
9 #include <dt-bindings/interconnect/qcom,icc.h>
10 
11 #define RPM_BUS_MASTER_REQ	0x73616d62
12 #define RPM_BUS_SLAVE_REQ	0x766c7362
13 
14 #define to_qcom_provider(_provider) \
15 	container_of(_provider, struct qcom_icc_provider, provider)
16 
17 enum qcom_icc_type {
18 	QCOM_ICC_NOC,
19 	QCOM_ICC_BIMC,
20 	QCOM_ICC_QNOC,
21 };
22 
23 /**
24  * struct qcom_icc_provider - Qualcomm specific interconnect provider
25  * @provider: generic interconnect provider
26  * @bus_clks: the clk_bulk_data table of bus clocks
27  * @num_clks: the total number of clk_bulk_data entries
28  * @type: the ICC provider type
29  * @qos_offset: offset to QoS registers
30  * @regmap: regmap for QoS registers read/write access
31  * @bus_clk_rate: bus clock rate in Hz
32  */
33 struct qcom_icc_provider {
34 	struct icc_provider provider;
35 	int num_clks;
36 	enum qcom_icc_type type;
37 	struct regmap *regmap;
38 	unsigned int qos_offset;
39 	u64 *bus_clk_rate;
40 	struct clk_bulk_data bus_clks[];
41 };
42 
43 /**
44  * struct qcom_icc_qos - Qualcomm specific interconnect QoS parameters
45  * @areq_prio: node requests priority
46  * @prio_level: priority level for bus communication
47  * @limit_commands: activate/deactivate limiter mode during runtime
48  * @ap_owned: indicates if the node is owned by the AP or by the RPM
49  * @qos_mode: default qos mode for this node
50  * @qos_port: qos port number for finding qos registers of this node
51  * @urg_fwd_en: enable urgent forwarding
52  */
53 struct qcom_icc_qos {
54 	u32 areq_prio;
55 	u32 prio_level;
56 	bool limit_commands;
57 	bool ap_owned;
58 	int qos_mode;
59 	int qos_port;
60 	bool urg_fwd_en;
61 };
62 
63 /**
64  * struct qcom_icc_node - Qualcomm specific interconnect nodes
65  * @name: the node name used in debugfs
66  * @id: a unique node identifier
67  * @links: an array of nodes where we can go next while traversing
68  * @num_links: the total number of @links
69  * @buswidth: width of the interconnect between a node and the bus (bytes)
70  * @sum_avg: current sum aggregate value of all avg bw requests
71  * @max_peak: current max aggregate value of all peak bw requests
72  * @mas_rpm_id:	RPM id for devices that are bus masters
73  * @slv_rpm_id:	RPM id for devices that are bus slaves
74  * @qos: NoC QoS setting parameters
75  */
76 struct qcom_icc_node {
77 	unsigned char *name;
78 	u16 id;
79 	const u16 *links;
80 	u16 num_links;
81 	u16 buswidth;
82 	u64 sum_avg[QCOM_ICC_NUM_BUCKETS];
83 	u64 max_peak[QCOM_ICC_NUM_BUCKETS];
84 	int mas_rpm_id;
85 	int slv_rpm_id;
86 	struct qcom_icc_qos qos;
87 };
88 
89 struct qcom_icc_desc {
90 	struct qcom_icc_node * const *nodes;
91 	size_t num_nodes;
92 	const char * const *clocks;
93 	size_t num_clocks;
94 	bool has_bus_pd;
95 	enum qcom_icc_type type;
96 	const struct regmap_config *regmap_cfg;
97 	unsigned int qos_offset;
98 };
99 
100 /* Valid for both NoC and BIMC */
101 #define NOC_QOS_MODE_INVALID		-1
102 #define NOC_QOS_MODE_FIXED		0x0
103 #define NOC_QOS_MODE_BYPASS		0x2
104 
105 int qnoc_probe(struct platform_device *pdev);
106 int qnoc_remove(struct platform_device *pdev);
107 
108 #endif
109