1 /* ------------------------------------------------------------------------- 2 * Copyright (C) 2014-2015, Intel Corporation 3 * 4 * Derived from: 5 * gslX68X.c 6 * Copyright (C) 2010-2015, Shanghai Sileadinc Co.Ltd 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; either version 2 of the License, or 11 * (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * ------------------------------------------------------------------------- 18 */ 19 20 #include <linux/i2c.h> 21 #include <linux/module.h> 22 #include <linux/acpi.h> 23 #include <linux/interrupt.h> 24 #include <linux/gpio/consumer.h> 25 #include <linux/delay.h> 26 #include <linux/firmware.h> 27 #include <linux/input.h> 28 #include <linux/input/mt.h> 29 #include <linux/input/touchscreen.h> 30 #include <linux/pm.h> 31 #include <linux/irq.h> 32 #include <linux/regulator/consumer.h> 33 34 #include <asm/unaligned.h> 35 36 #define SILEAD_TS_NAME "silead_ts" 37 38 #define SILEAD_REG_RESET 0xE0 39 #define SILEAD_REG_DATA 0x80 40 #define SILEAD_REG_TOUCH_NR 0x80 41 #define SILEAD_REG_POWER 0xBC 42 #define SILEAD_REG_CLOCK 0xE4 43 #define SILEAD_REG_STATUS 0xB0 44 #define SILEAD_REG_ID 0xFC 45 #define SILEAD_REG_MEM_CHECK 0xB0 46 47 #define SILEAD_STATUS_OK 0x5A5A5A5A 48 #define SILEAD_TS_DATA_LEN 44 49 #define SILEAD_CLOCK 0x04 50 51 #define SILEAD_CMD_RESET 0x88 52 #define SILEAD_CMD_START 0x00 53 54 #define SILEAD_POINT_DATA_LEN 0x04 55 #define SILEAD_POINT_Y_OFF 0x00 56 #define SILEAD_POINT_Y_MSB_OFF 0x01 57 #define SILEAD_POINT_X_OFF 0x02 58 #define SILEAD_POINT_X_MSB_OFF 0x03 59 #define SILEAD_EXTRA_DATA_MASK 0xF0 60 61 #define SILEAD_CMD_SLEEP_MIN 10000 62 #define SILEAD_CMD_SLEEP_MAX 20000 63 #define SILEAD_POWER_SLEEP 20 64 #define SILEAD_STARTUP_SLEEP 30 65 66 #define SILEAD_MAX_FINGERS 10 67 68 enum silead_ts_power { 69 SILEAD_POWER_ON = 1, 70 SILEAD_POWER_OFF = 0 71 }; 72 73 struct silead_ts_data { 74 struct i2c_client *client; 75 struct gpio_desc *gpio_power; 76 struct input_dev *input; 77 struct regulator_bulk_data regulators[2]; 78 char fw_name[64]; 79 struct touchscreen_properties prop; 80 u32 max_fingers; 81 u32 chip_id; 82 struct input_mt_pos pos[SILEAD_MAX_FINGERS]; 83 int slots[SILEAD_MAX_FINGERS]; 84 int id[SILEAD_MAX_FINGERS]; 85 }; 86 87 struct silead_fw_data { 88 u32 offset; 89 u32 val; 90 }; 91 92 static int silead_ts_request_input_dev(struct silead_ts_data *data) 93 { 94 struct device *dev = &data->client->dev; 95 int error; 96 97 data->input = devm_input_allocate_device(dev); 98 if (!data->input) { 99 dev_err(dev, 100 "Failed to allocate input device\n"); 101 return -ENOMEM; 102 } 103 104 input_set_abs_params(data->input, ABS_MT_POSITION_X, 0, 4095, 0, 0); 105 input_set_abs_params(data->input, ABS_MT_POSITION_Y, 0, 4095, 0, 0); 106 touchscreen_parse_properties(data->input, true, &data->prop); 107 108 input_mt_init_slots(data->input, data->max_fingers, 109 INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED | 110 INPUT_MT_TRACK); 111 112 if (device_property_read_bool(dev, "silead,home-button")) 113 input_set_capability(data->input, EV_KEY, KEY_LEFTMETA); 114 115 data->input->name = SILEAD_TS_NAME; 116 data->input->phys = "input/ts"; 117 data->input->id.bustype = BUS_I2C; 118 119 error = input_register_device(data->input); 120 if (error) { 121 dev_err(dev, "Failed to register input device: %d\n", error); 122 return error; 123 } 124 125 return 0; 126 } 127 128 static void silead_ts_set_power(struct i2c_client *client, 129 enum silead_ts_power state) 130 { 131 struct silead_ts_data *data = i2c_get_clientdata(client); 132 133 if (data->gpio_power) { 134 gpiod_set_value_cansleep(data->gpio_power, state); 135 msleep(SILEAD_POWER_SLEEP); 136 } 137 } 138 139 static void silead_ts_read_data(struct i2c_client *client) 140 { 141 struct silead_ts_data *data = i2c_get_clientdata(client); 142 struct input_dev *input = data->input; 143 struct device *dev = &client->dev; 144 u8 *bufp, buf[SILEAD_TS_DATA_LEN]; 145 int touch_nr, softbutton, error, i; 146 bool softbutton_pressed = false; 147 148 error = i2c_smbus_read_i2c_block_data(client, SILEAD_REG_DATA, 149 SILEAD_TS_DATA_LEN, buf); 150 if (error < 0) { 151 dev_err(dev, "Data read error %d\n", error); 152 return; 153 } 154 155 if (buf[0] > data->max_fingers) { 156 dev_warn(dev, "More touches reported then supported %d > %d\n", 157 buf[0], data->max_fingers); 158 buf[0] = data->max_fingers; 159 } 160 161 touch_nr = 0; 162 bufp = buf + SILEAD_POINT_DATA_LEN; 163 for (i = 0; i < buf[0]; i++, bufp += SILEAD_POINT_DATA_LEN) { 164 softbutton = (bufp[SILEAD_POINT_Y_MSB_OFF] & 165 SILEAD_EXTRA_DATA_MASK) >> 4; 166 167 if (softbutton) { 168 /* 169 * For now only respond to softbutton == 0x01, some 170 * tablets *without* a capacative button send 0x04 171 * when crossing the edges of the screen. 172 */ 173 if (softbutton == 0x01) 174 softbutton_pressed = true; 175 176 continue; 177 } 178 179 /* 180 * Bits 4-7 are the touch id, note not all models have 181 * hardware touch ids so atm we don't use these. 182 */ 183 data->id[touch_nr] = (bufp[SILEAD_POINT_X_MSB_OFF] & 184 SILEAD_EXTRA_DATA_MASK) >> 4; 185 touchscreen_set_mt_pos(&data->pos[touch_nr], &data->prop, 186 get_unaligned_le16(&bufp[SILEAD_POINT_X_OFF]) & 0xfff, 187 get_unaligned_le16(&bufp[SILEAD_POINT_Y_OFF]) & 0xfff); 188 touch_nr++; 189 } 190 191 input_mt_assign_slots(input, data->slots, data->pos, touch_nr, 0); 192 193 for (i = 0; i < touch_nr; i++) { 194 input_mt_slot(input, data->slots[i]); 195 input_mt_report_slot_state(input, MT_TOOL_FINGER, true); 196 input_report_abs(input, ABS_MT_POSITION_X, data->pos[i].x); 197 input_report_abs(input, ABS_MT_POSITION_Y, data->pos[i].y); 198 199 dev_dbg(dev, "x=%d y=%d hw_id=%d sw_id=%d\n", data->pos[i].x, 200 data->pos[i].y, data->id[i], data->slots[i]); 201 } 202 203 input_mt_sync_frame(input); 204 input_report_key(input, KEY_LEFTMETA, softbutton_pressed); 205 input_sync(input); 206 } 207 208 static int silead_ts_init(struct i2c_client *client) 209 { 210 struct silead_ts_data *data = i2c_get_clientdata(client); 211 int error; 212 213 error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET, 214 SILEAD_CMD_RESET); 215 if (error) 216 goto i2c_write_err; 217 usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); 218 219 error = i2c_smbus_write_byte_data(client, SILEAD_REG_TOUCH_NR, 220 data->max_fingers); 221 if (error) 222 goto i2c_write_err; 223 usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); 224 225 error = i2c_smbus_write_byte_data(client, SILEAD_REG_CLOCK, 226 SILEAD_CLOCK); 227 if (error) 228 goto i2c_write_err; 229 usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); 230 231 error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET, 232 SILEAD_CMD_START); 233 if (error) 234 goto i2c_write_err; 235 usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); 236 237 return 0; 238 239 i2c_write_err: 240 dev_err(&client->dev, "Registers clear error %d\n", error); 241 return error; 242 } 243 244 static int silead_ts_reset(struct i2c_client *client) 245 { 246 int error; 247 248 error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET, 249 SILEAD_CMD_RESET); 250 if (error) 251 goto i2c_write_err; 252 usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); 253 254 error = i2c_smbus_write_byte_data(client, SILEAD_REG_CLOCK, 255 SILEAD_CLOCK); 256 if (error) 257 goto i2c_write_err; 258 usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); 259 260 error = i2c_smbus_write_byte_data(client, SILEAD_REG_POWER, 261 SILEAD_CMD_START); 262 if (error) 263 goto i2c_write_err; 264 usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); 265 266 return 0; 267 268 i2c_write_err: 269 dev_err(&client->dev, "Chip reset error %d\n", error); 270 return error; 271 } 272 273 static int silead_ts_startup(struct i2c_client *client) 274 { 275 int error; 276 277 error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET, 0x00); 278 if (error) { 279 dev_err(&client->dev, "Startup error %d\n", error); 280 return error; 281 } 282 283 msleep(SILEAD_STARTUP_SLEEP); 284 285 return 0; 286 } 287 288 static int silead_ts_load_fw(struct i2c_client *client) 289 { 290 struct device *dev = &client->dev; 291 struct silead_ts_data *data = i2c_get_clientdata(client); 292 unsigned int fw_size, i; 293 const struct firmware *fw; 294 struct silead_fw_data *fw_data; 295 int error; 296 297 dev_dbg(dev, "Firmware file name: %s", data->fw_name); 298 299 error = request_firmware(&fw, data->fw_name, dev); 300 if (error) { 301 dev_err(dev, "Firmware request error %d\n", error); 302 return error; 303 } 304 305 fw_size = fw->size / sizeof(*fw_data); 306 fw_data = (struct silead_fw_data *)fw->data; 307 308 for (i = 0; i < fw_size; i++) { 309 error = i2c_smbus_write_i2c_block_data(client, 310 fw_data[i].offset, 311 4, 312 (u8 *)&fw_data[i].val); 313 if (error) { 314 dev_err(dev, "Firmware load error %d\n", error); 315 break; 316 } 317 } 318 319 release_firmware(fw); 320 return error ?: 0; 321 } 322 323 static u32 silead_ts_get_status(struct i2c_client *client) 324 { 325 int error; 326 __le32 status; 327 328 error = i2c_smbus_read_i2c_block_data(client, SILEAD_REG_STATUS, 329 sizeof(status), (u8 *)&status); 330 if (error < 0) { 331 dev_err(&client->dev, "Status read error %d\n", error); 332 return error; 333 } 334 335 return le32_to_cpu(status); 336 } 337 338 static int silead_ts_get_id(struct i2c_client *client) 339 { 340 struct silead_ts_data *data = i2c_get_clientdata(client); 341 __le32 chip_id; 342 int error; 343 344 error = i2c_smbus_read_i2c_block_data(client, SILEAD_REG_ID, 345 sizeof(chip_id), (u8 *)&chip_id); 346 if (error < 0) { 347 dev_err(&client->dev, "Chip ID read error %d\n", error); 348 return error; 349 } 350 351 data->chip_id = le32_to_cpu(chip_id); 352 dev_info(&client->dev, "Silead chip ID: 0x%8X", data->chip_id); 353 354 return 0; 355 } 356 357 static int silead_ts_setup(struct i2c_client *client) 358 { 359 int error; 360 u32 status; 361 362 silead_ts_set_power(client, SILEAD_POWER_OFF); 363 silead_ts_set_power(client, SILEAD_POWER_ON); 364 365 error = silead_ts_get_id(client); 366 if (error) 367 return error; 368 369 error = silead_ts_init(client); 370 if (error) 371 return error; 372 373 error = silead_ts_reset(client); 374 if (error) 375 return error; 376 377 error = silead_ts_load_fw(client); 378 if (error) 379 return error; 380 381 error = silead_ts_startup(client); 382 if (error) 383 return error; 384 385 status = silead_ts_get_status(client); 386 if (status != SILEAD_STATUS_OK) { 387 dev_err(&client->dev, 388 "Initialization error, status: 0x%X\n", status); 389 return -ENODEV; 390 } 391 392 return 0; 393 } 394 395 static irqreturn_t silead_ts_threaded_irq_handler(int irq, void *id) 396 { 397 struct silead_ts_data *data = id; 398 struct i2c_client *client = data->client; 399 400 silead_ts_read_data(client); 401 402 return IRQ_HANDLED; 403 } 404 405 static void silead_ts_read_props(struct i2c_client *client) 406 { 407 struct silead_ts_data *data = i2c_get_clientdata(client); 408 struct device *dev = &client->dev; 409 const char *str; 410 int error; 411 412 error = device_property_read_u32(dev, "silead,max-fingers", 413 &data->max_fingers); 414 if (error) { 415 dev_dbg(dev, "Max fingers read error %d\n", error); 416 data->max_fingers = 5; /* Most devices handle up-to 5 fingers */ 417 } 418 419 error = device_property_read_string(dev, "firmware-name", &str); 420 if (!error) 421 snprintf(data->fw_name, sizeof(data->fw_name), 422 "silead/%s", str); 423 else 424 dev_dbg(dev, "Firmware file name read error. Using default."); 425 } 426 427 #ifdef CONFIG_ACPI 428 static int silead_ts_set_default_fw_name(struct silead_ts_data *data, 429 const struct i2c_device_id *id) 430 { 431 const struct acpi_device_id *acpi_id; 432 struct device *dev = &data->client->dev; 433 int i; 434 435 if (ACPI_HANDLE(dev)) { 436 acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev); 437 if (!acpi_id) 438 return -ENODEV; 439 440 snprintf(data->fw_name, sizeof(data->fw_name), 441 "silead/%s.fw", acpi_id->id); 442 443 for (i = 0; i < strlen(data->fw_name); i++) 444 data->fw_name[i] = tolower(data->fw_name[i]); 445 } else { 446 snprintf(data->fw_name, sizeof(data->fw_name), 447 "silead/%s.fw", id->name); 448 } 449 450 return 0; 451 } 452 #else 453 static int silead_ts_set_default_fw_name(struct silead_ts_data *data, 454 const struct i2c_device_id *id) 455 { 456 snprintf(data->fw_name, sizeof(data->fw_name), 457 "silead/%s.fw", id->name); 458 return 0; 459 } 460 #endif 461 462 static void silead_disable_regulator(void *arg) 463 { 464 struct silead_ts_data *data = arg; 465 466 regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators); 467 } 468 469 static int silead_ts_probe(struct i2c_client *client, 470 const struct i2c_device_id *id) 471 { 472 struct silead_ts_data *data; 473 struct device *dev = &client->dev; 474 int error; 475 476 if (!i2c_check_functionality(client->adapter, 477 I2C_FUNC_I2C | 478 I2C_FUNC_SMBUS_READ_I2C_BLOCK | 479 I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) { 480 dev_err(dev, "I2C functionality check failed\n"); 481 return -ENXIO; 482 } 483 484 data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); 485 if (!data) 486 return -ENOMEM; 487 488 i2c_set_clientdata(client, data); 489 data->client = client; 490 491 error = silead_ts_set_default_fw_name(data, id); 492 if (error) 493 return error; 494 495 silead_ts_read_props(client); 496 497 /* We must have the IRQ provided by DT or ACPI subsytem */ 498 if (client->irq <= 0) 499 return -ENODEV; 500 501 data->regulators[0].supply = "vddio"; 502 data->regulators[1].supply = "avdd"; 503 error = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->regulators), 504 data->regulators); 505 if (error) 506 return error; 507 508 /* 509 * Enable regulators at probe and disable them at remove, we need 510 * to keep the chip powered otherwise it forgets its firmware. 511 */ 512 error = regulator_bulk_enable(ARRAY_SIZE(data->regulators), 513 data->regulators); 514 if (error) 515 return error; 516 517 error = devm_add_action_or_reset(dev, silead_disable_regulator, data); 518 if (error) 519 return error; 520 521 /* Power GPIO pin */ 522 data->gpio_power = devm_gpiod_get_optional(dev, "power", GPIOD_OUT_LOW); 523 if (IS_ERR(data->gpio_power)) { 524 if (PTR_ERR(data->gpio_power) != -EPROBE_DEFER) 525 dev_err(dev, "Shutdown GPIO request failed\n"); 526 return PTR_ERR(data->gpio_power); 527 } 528 529 error = silead_ts_setup(client); 530 if (error) 531 return error; 532 533 error = silead_ts_request_input_dev(data); 534 if (error) 535 return error; 536 537 error = devm_request_threaded_irq(dev, client->irq, 538 NULL, silead_ts_threaded_irq_handler, 539 IRQF_ONESHOT, client->name, data); 540 if (error) { 541 if (error != -EPROBE_DEFER) 542 dev_err(dev, "IRQ request failed %d\n", error); 543 return error; 544 } 545 546 return 0; 547 } 548 549 static int __maybe_unused silead_ts_suspend(struct device *dev) 550 { 551 struct i2c_client *client = to_i2c_client(dev); 552 553 disable_irq(client->irq); 554 silead_ts_set_power(client, SILEAD_POWER_OFF); 555 return 0; 556 } 557 558 static int __maybe_unused silead_ts_resume(struct device *dev) 559 { 560 struct i2c_client *client = to_i2c_client(dev); 561 int error, status; 562 563 silead_ts_set_power(client, SILEAD_POWER_ON); 564 565 error = silead_ts_reset(client); 566 if (error) 567 return error; 568 569 error = silead_ts_startup(client); 570 if (error) 571 return error; 572 573 status = silead_ts_get_status(client); 574 if (status != SILEAD_STATUS_OK) { 575 dev_err(dev, "Resume error, status: 0x%02x\n", status); 576 return -ENODEV; 577 } 578 579 enable_irq(client->irq); 580 581 return 0; 582 } 583 584 static SIMPLE_DEV_PM_OPS(silead_ts_pm, silead_ts_suspend, silead_ts_resume); 585 586 static const struct i2c_device_id silead_ts_id[] = { 587 { "gsl1680", 0 }, 588 { "gsl1688", 0 }, 589 { "gsl3670", 0 }, 590 { "gsl3675", 0 }, 591 { "gsl3692", 0 }, 592 { "mssl1680", 0 }, 593 { } 594 }; 595 MODULE_DEVICE_TABLE(i2c, silead_ts_id); 596 597 #ifdef CONFIG_ACPI 598 static const struct acpi_device_id silead_ts_acpi_match[] = { 599 { "GSL1680", 0 }, 600 { "GSL1688", 0 }, 601 { "GSL3670", 0 }, 602 { "GSL3675", 0 }, 603 { "GSL3692", 0 }, 604 { "MSSL1680", 0 }, 605 { } 606 }; 607 MODULE_DEVICE_TABLE(acpi, silead_ts_acpi_match); 608 #endif 609 610 #ifdef CONFIG_OF 611 static const struct of_device_id silead_ts_of_match[] = { 612 { .compatible = "silead,gsl1680" }, 613 { .compatible = "silead,gsl1688" }, 614 { .compatible = "silead,gsl3670" }, 615 { .compatible = "silead,gsl3675" }, 616 { .compatible = "silead,gsl3692" }, 617 { }, 618 }; 619 MODULE_DEVICE_TABLE(of, silead_ts_of_match); 620 #endif 621 622 static struct i2c_driver silead_ts_driver = { 623 .probe = silead_ts_probe, 624 .id_table = silead_ts_id, 625 .driver = { 626 .name = SILEAD_TS_NAME, 627 .acpi_match_table = ACPI_PTR(silead_ts_acpi_match), 628 .of_match_table = of_match_ptr(silead_ts_of_match), 629 .pm = &silead_ts_pm, 630 }, 631 }; 632 module_i2c_driver(silead_ts_driver); 633 634 MODULE_AUTHOR("Robert Dolca <robert.dolca@intel.com>"); 635 MODULE_DESCRIPTION("Silead I2C touchscreen driver"); 636 MODULE_LICENSE("GPL"); 637