1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * mcs5000_ts.c - Touchscreen driver for MELFAS MCS-5000 controller 4 * 5 * Copyright (C) 2009 Samsung Electronics Co.Ltd 6 * Author: Joonyoung Shim <jy0922.shim@samsung.com> 7 * 8 * Based on wm97xx-core.c 9 */ 10 11 #include <linux/module.h> 12 #include <linux/i2c.h> 13 #include <linux/interrupt.h> 14 #include <linux/input.h> 15 #include <linux/irq.h> 16 #include <linux/platform_data/mcs.h> 17 #include <linux/slab.h> 18 19 /* Registers */ 20 #define MCS5000_TS_STATUS 0x00 21 #define STATUS_OFFSET 0 22 #define STATUS_NO (0 << STATUS_OFFSET) 23 #define STATUS_INIT (1 << STATUS_OFFSET) 24 #define STATUS_SENSING (2 << STATUS_OFFSET) 25 #define STATUS_COORD (3 << STATUS_OFFSET) 26 #define STATUS_GESTURE (4 << STATUS_OFFSET) 27 #define ERROR_OFFSET 4 28 #define ERROR_NO (0 << ERROR_OFFSET) 29 #define ERROR_POWER_ON_RESET (1 << ERROR_OFFSET) 30 #define ERROR_INT_RESET (2 << ERROR_OFFSET) 31 #define ERROR_EXT_RESET (3 << ERROR_OFFSET) 32 #define ERROR_INVALID_REG_ADDRESS (8 << ERROR_OFFSET) 33 #define ERROR_INVALID_REG_VALUE (9 << ERROR_OFFSET) 34 35 #define MCS5000_TS_OP_MODE 0x01 36 #define RESET_OFFSET 0 37 #define RESET_NO (0 << RESET_OFFSET) 38 #define RESET_EXT_SOFT (1 << RESET_OFFSET) 39 #define OP_MODE_OFFSET 1 40 #define OP_MODE_SLEEP (0 << OP_MODE_OFFSET) 41 #define OP_MODE_ACTIVE (1 << OP_MODE_OFFSET) 42 #define GESTURE_OFFSET 4 43 #define GESTURE_DISABLE (0 << GESTURE_OFFSET) 44 #define GESTURE_ENABLE (1 << GESTURE_OFFSET) 45 #define PROXIMITY_OFFSET 5 46 #define PROXIMITY_DISABLE (0 << PROXIMITY_OFFSET) 47 #define PROXIMITY_ENABLE (1 << PROXIMITY_OFFSET) 48 #define SCAN_MODE_OFFSET 6 49 #define SCAN_MODE_INTERRUPT (0 << SCAN_MODE_OFFSET) 50 #define SCAN_MODE_POLLING (1 << SCAN_MODE_OFFSET) 51 #define REPORT_RATE_OFFSET 7 52 #define REPORT_RATE_40 (0 << REPORT_RATE_OFFSET) 53 #define REPORT_RATE_80 (1 << REPORT_RATE_OFFSET) 54 55 #define MCS5000_TS_SENS_CTL 0x02 56 #define MCS5000_TS_FILTER_CTL 0x03 57 #define PRI_FILTER_OFFSET 0 58 #define SEC_FILTER_OFFSET 4 59 60 #define MCS5000_TS_X_SIZE_UPPER 0x08 61 #define MCS5000_TS_X_SIZE_LOWER 0x09 62 #define MCS5000_TS_Y_SIZE_UPPER 0x0A 63 #define MCS5000_TS_Y_SIZE_LOWER 0x0B 64 65 #define MCS5000_TS_INPUT_INFO 0x10 66 #define INPUT_TYPE_OFFSET 0 67 #define INPUT_TYPE_NONTOUCH (0 << INPUT_TYPE_OFFSET) 68 #define INPUT_TYPE_SINGLE (1 << INPUT_TYPE_OFFSET) 69 #define INPUT_TYPE_DUAL (2 << INPUT_TYPE_OFFSET) 70 #define INPUT_TYPE_PALM (3 << INPUT_TYPE_OFFSET) 71 #define INPUT_TYPE_PROXIMITY (7 << INPUT_TYPE_OFFSET) 72 #define GESTURE_CODE_OFFSET 3 73 #define GESTURE_CODE_NO (0 << GESTURE_CODE_OFFSET) 74 75 #define MCS5000_TS_X_POS_UPPER 0x11 76 #define MCS5000_TS_X_POS_LOWER 0x12 77 #define MCS5000_TS_Y_POS_UPPER 0x13 78 #define MCS5000_TS_Y_POS_LOWER 0x14 79 #define MCS5000_TS_Z_POS 0x15 80 #define MCS5000_TS_WIDTH 0x16 81 #define MCS5000_TS_GESTURE_VAL 0x17 82 #define MCS5000_TS_MODULE_REV 0x20 83 #define MCS5000_TS_FIRMWARE_VER 0x21 84 85 /* Touchscreen absolute values */ 86 #define MCS5000_MAX_XC 0x3ff 87 #define MCS5000_MAX_YC 0x3ff 88 89 enum mcs5000_ts_read_offset { 90 READ_INPUT_INFO, 91 READ_X_POS_UPPER, 92 READ_X_POS_LOWER, 93 READ_Y_POS_UPPER, 94 READ_Y_POS_LOWER, 95 READ_BLOCK_SIZE, 96 }; 97 98 /* Each client has this additional data */ 99 struct mcs5000_ts_data { 100 struct i2c_client *client; 101 struct input_dev *input_dev; 102 const struct mcs_platform_data *platform_data; 103 }; 104 105 static irqreturn_t mcs5000_ts_interrupt(int irq, void *dev_id) 106 { 107 struct mcs5000_ts_data *data = dev_id; 108 struct i2c_client *client = data->client; 109 u8 buffer[READ_BLOCK_SIZE]; 110 int err; 111 int x; 112 int y; 113 114 err = i2c_smbus_read_i2c_block_data(client, MCS5000_TS_INPUT_INFO, 115 READ_BLOCK_SIZE, buffer); 116 if (err < 0) { 117 dev_err(&client->dev, "%s, err[%d]\n", __func__, err); 118 goto out; 119 } 120 121 switch (buffer[READ_INPUT_INFO]) { 122 case INPUT_TYPE_NONTOUCH: 123 input_report_key(data->input_dev, BTN_TOUCH, 0); 124 input_sync(data->input_dev); 125 break; 126 127 case INPUT_TYPE_SINGLE: 128 x = (buffer[READ_X_POS_UPPER] << 8) | buffer[READ_X_POS_LOWER]; 129 y = (buffer[READ_Y_POS_UPPER] << 8) | buffer[READ_Y_POS_LOWER]; 130 131 input_report_key(data->input_dev, BTN_TOUCH, 1); 132 input_report_abs(data->input_dev, ABS_X, x); 133 input_report_abs(data->input_dev, ABS_Y, y); 134 input_sync(data->input_dev); 135 break; 136 137 case INPUT_TYPE_DUAL: 138 /* TODO */ 139 break; 140 141 case INPUT_TYPE_PALM: 142 /* TODO */ 143 break; 144 145 case INPUT_TYPE_PROXIMITY: 146 /* TODO */ 147 break; 148 149 default: 150 dev_err(&client->dev, "Unknown ts input type %d\n", 151 buffer[READ_INPUT_INFO]); 152 break; 153 } 154 155 out: 156 return IRQ_HANDLED; 157 } 158 159 static void mcs5000_ts_phys_init(struct mcs5000_ts_data *data, 160 const struct mcs_platform_data *platform_data) 161 { 162 struct i2c_client *client = data->client; 163 164 /* Touch reset & sleep mode */ 165 i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE, 166 RESET_EXT_SOFT | OP_MODE_SLEEP); 167 168 /* Touch size */ 169 i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_UPPER, 170 platform_data->x_size >> 8); 171 i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_LOWER, 172 platform_data->x_size & 0xff); 173 i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_UPPER, 174 platform_data->y_size >> 8); 175 i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_LOWER, 176 platform_data->y_size & 0xff); 177 178 /* Touch active mode & 80 report rate */ 179 i2c_smbus_write_byte_data(data->client, MCS5000_TS_OP_MODE, 180 OP_MODE_ACTIVE | REPORT_RATE_80); 181 } 182 183 static int mcs5000_ts_probe(struct i2c_client *client) 184 { 185 const struct mcs_platform_data *pdata; 186 struct mcs5000_ts_data *data; 187 struct input_dev *input_dev; 188 int error; 189 190 pdata = dev_get_platdata(&client->dev); 191 if (!pdata) 192 return -EINVAL; 193 194 data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); 195 if (!data) { 196 dev_err(&client->dev, "Failed to allocate memory\n"); 197 return -ENOMEM; 198 } 199 200 data->client = client; 201 202 input_dev = devm_input_allocate_device(&client->dev); 203 if (!input_dev) { 204 dev_err(&client->dev, "Failed to allocate input device\n"); 205 return -ENOMEM; 206 } 207 208 input_dev->name = "MELFAS MCS-5000 Touchscreen"; 209 input_dev->id.bustype = BUS_I2C; 210 input_dev->dev.parent = &client->dev; 211 212 __set_bit(EV_ABS, input_dev->evbit); 213 __set_bit(EV_KEY, input_dev->evbit); 214 __set_bit(BTN_TOUCH, input_dev->keybit); 215 input_set_abs_params(input_dev, ABS_X, 0, MCS5000_MAX_XC, 0, 0); 216 input_set_abs_params(input_dev, ABS_Y, 0, MCS5000_MAX_YC, 0, 0); 217 218 data->input_dev = input_dev; 219 220 if (pdata->cfg_pin) 221 pdata->cfg_pin(); 222 223 error = devm_request_threaded_irq(&client->dev, client->irq, 224 NULL, mcs5000_ts_interrupt, 225 IRQF_TRIGGER_LOW | IRQF_ONESHOT, 226 "mcs5000_ts", data); 227 if (error) { 228 dev_err(&client->dev, "Failed to register interrupt\n"); 229 return error; 230 } 231 232 error = input_register_device(data->input_dev); 233 if (error) { 234 dev_err(&client->dev, "Failed to register input device\n"); 235 return error; 236 } 237 238 mcs5000_ts_phys_init(data, pdata); 239 i2c_set_clientdata(client, data); 240 241 return 0; 242 } 243 244 static int __maybe_unused mcs5000_ts_suspend(struct device *dev) 245 { 246 struct i2c_client *client = to_i2c_client(dev); 247 248 /* Touch sleep mode */ 249 i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE, OP_MODE_SLEEP); 250 251 return 0; 252 } 253 254 static int __maybe_unused mcs5000_ts_resume(struct device *dev) 255 { 256 struct i2c_client *client = to_i2c_client(dev); 257 struct mcs5000_ts_data *data = i2c_get_clientdata(client); 258 const struct mcs_platform_data *pdata = dev_get_platdata(dev); 259 260 mcs5000_ts_phys_init(data, pdata); 261 262 return 0; 263 } 264 265 static SIMPLE_DEV_PM_OPS(mcs5000_ts_pm, mcs5000_ts_suspend, mcs5000_ts_resume); 266 267 static const struct i2c_device_id mcs5000_ts_id[] = { 268 { "mcs5000_ts", 0 }, 269 { } 270 }; 271 MODULE_DEVICE_TABLE(i2c, mcs5000_ts_id); 272 273 static struct i2c_driver mcs5000_ts_driver = { 274 .probe_new = mcs5000_ts_probe, 275 .driver = { 276 .name = "mcs5000_ts", 277 .pm = &mcs5000_ts_pm, 278 }, 279 .id_table = mcs5000_ts_id, 280 }; 281 282 module_i2c_driver(mcs5000_ts_driver); 283 284 /* Module information */ 285 MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); 286 MODULE_DESCRIPTION("Touchscreen driver for MELFAS MCS-5000 controller"); 287 MODULE_LICENSE("GPL"); 288