1 // SPDX-License-Identifier: GPL-2.0-only 2 #include <linux/crc-ccitt.h> 3 #include <linux/delay.h> 4 #include <linux/gpio/consumer.h> 5 #include <linux/i2c.h> 6 #include <linux/ihex.h> 7 #include <linux/input.h> 8 #include <linux/input/mt.h> 9 #include <linux/input/touchscreen.h> 10 #include <linux/interrupt.h> 11 #include <linux/module.h> 12 #include <linux/of_device.h> 13 #include <linux/sizes.h> 14 #include <linux/slab.h> 15 #include <asm/unaligned.h> 16 17 #define ILI2XXX_POLL_PERIOD 15 18 19 #define ILI210X_DATA_SIZE 64 20 #define ILI211X_DATA_SIZE 43 21 #define ILI251X_DATA_SIZE1 31 22 #define ILI251X_DATA_SIZE2 20 23 24 /* Touchscreen commands */ 25 #define REG_TOUCHDATA 0x10 26 #define REG_PANEL_INFO 0x20 27 #define REG_FIRMWARE_VERSION 0x40 28 #define REG_PROTOCOL_VERSION 0x42 29 #define REG_KERNEL_VERSION 0x61 30 #define REG_IC_BUSY 0x80 31 #define REG_IC_BUSY_NOT_BUSY 0x50 32 #define REG_GET_MODE 0xc0 33 #define REG_GET_MODE_AP 0x5a 34 #define REG_GET_MODE_BL 0x55 35 #define REG_SET_MODE_AP 0xc1 36 #define REG_SET_MODE_BL 0xc2 37 #define REG_WRITE_DATA 0xc3 38 #define REG_WRITE_ENABLE 0xc4 39 #define REG_READ_DATA_CRC 0xc7 40 #define REG_CALIBRATE 0xcc 41 42 #define ILI251X_FW_FILENAME "ilitek/ili251x.bin" 43 44 struct ili2xxx_chip { 45 int (*read_reg)(struct i2c_client *client, u8 reg, 46 void *buf, size_t len); 47 int (*get_touch_data)(struct i2c_client *client, u8 *data); 48 bool (*parse_touch_data)(const u8 *data, unsigned int finger, 49 unsigned int *x, unsigned int *y, 50 unsigned int *z); 51 bool (*continue_polling)(const u8 *data, bool touch); 52 unsigned int max_touches; 53 unsigned int resolution; 54 bool has_calibrate_reg; 55 bool has_firmware_proto; 56 bool has_pressure_reg; 57 }; 58 59 struct ili210x { 60 struct i2c_client *client; 61 struct input_dev *input; 62 struct gpio_desc *reset_gpio; 63 struct touchscreen_properties prop; 64 const struct ili2xxx_chip *chip; 65 u8 version_firmware[8]; 66 u8 version_kernel[5]; 67 u8 version_proto[2]; 68 u8 ic_mode[2]; 69 bool stop; 70 }; 71 72 static int ili210x_read_reg(struct i2c_client *client, 73 u8 reg, void *buf, size_t len) 74 { 75 struct i2c_msg msg[] = { 76 { 77 .addr = client->addr, 78 .flags = 0, 79 .len = 1, 80 .buf = ®, 81 }, 82 { 83 .addr = client->addr, 84 .flags = I2C_M_RD, 85 .len = len, 86 .buf = buf, 87 } 88 }; 89 int error, ret; 90 91 ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); 92 if (ret != ARRAY_SIZE(msg)) { 93 error = ret < 0 ? ret : -EIO; 94 dev_err(&client->dev, "%s failed: %d\n", __func__, error); 95 return error; 96 } 97 98 return 0; 99 } 100 101 static int ili210x_read_touch_data(struct i2c_client *client, u8 *data) 102 { 103 return ili210x_read_reg(client, REG_TOUCHDATA, 104 data, ILI210X_DATA_SIZE); 105 } 106 107 static bool ili210x_touchdata_to_coords(const u8 *touchdata, 108 unsigned int finger, 109 unsigned int *x, unsigned int *y, 110 unsigned int *z) 111 { 112 if (!(touchdata[0] & BIT(finger))) 113 return false; 114 115 *x = get_unaligned_be16(touchdata + 1 + (finger * 4) + 0); 116 *y = get_unaligned_be16(touchdata + 1 + (finger * 4) + 2); 117 118 return true; 119 } 120 121 static bool ili210x_check_continue_polling(const u8 *data, bool touch) 122 { 123 return data[0] & 0xf3; 124 } 125 126 static const struct ili2xxx_chip ili210x_chip = { 127 .read_reg = ili210x_read_reg, 128 .get_touch_data = ili210x_read_touch_data, 129 .parse_touch_data = ili210x_touchdata_to_coords, 130 .continue_polling = ili210x_check_continue_polling, 131 .max_touches = 2, 132 .has_calibrate_reg = true, 133 }; 134 135 static int ili211x_read_touch_data(struct i2c_client *client, u8 *data) 136 { 137 s16 sum = 0; 138 int error; 139 int ret; 140 int i; 141 142 ret = i2c_master_recv(client, data, ILI211X_DATA_SIZE); 143 if (ret != ILI211X_DATA_SIZE) { 144 error = ret < 0 ? ret : -EIO; 145 dev_err(&client->dev, "%s failed: %d\n", __func__, error); 146 return error; 147 } 148 149 /* This chip uses custom checksum at the end of data */ 150 for (i = 0; i < ILI211X_DATA_SIZE - 1; i++) 151 sum = (sum + data[i]) & 0xff; 152 153 if ((-sum & 0xff) != data[ILI211X_DATA_SIZE - 1]) { 154 dev_err(&client->dev, 155 "CRC error (crc=0x%02x expected=0x%02x)\n", 156 sum, data[ILI211X_DATA_SIZE - 1]); 157 return -EIO; 158 } 159 160 return 0; 161 } 162 163 static bool ili211x_touchdata_to_coords(const u8 *touchdata, 164 unsigned int finger, 165 unsigned int *x, unsigned int *y, 166 unsigned int *z) 167 { 168 u32 data; 169 170 data = get_unaligned_be32(touchdata + 1 + (finger * 4) + 0); 171 if (data == 0xffffffff) /* Finger up */ 172 return false; 173 174 *x = ((touchdata[1 + (finger * 4) + 0] & 0xf0) << 4) | 175 touchdata[1 + (finger * 4) + 1]; 176 *y = ((touchdata[1 + (finger * 4) + 0] & 0x0f) << 8) | 177 touchdata[1 + (finger * 4) + 2]; 178 179 return true; 180 } 181 182 static bool ili211x_decline_polling(const u8 *data, bool touch) 183 { 184 return false; 185 } 186 187 static const struct ili2xxx_chip ili211x_chip = { 188 .read_reg = ili210x_read_reg, 189 .get_touch_data = ili211x_read_touch_data, 190 .parse_touch_data = ili211x_touchdata_to_coords, 191 .continue_polling = ili211x_decline_polling, 192 .max_touches = 10, 193 .resolution = 2048, 194 }; 195 196 static bool ili212x_touchdata_to_coords(const u8 *touchdata, 197 unsigned int finger, 198 unsigned int *x, unsigned int *y, 199 unsigned int *z) 200 { 201 u16 val; 202 203 val = get_unaligned_be16(touchdata + 3 + (finger * 5) + 0); 204 if (!(val & BIT(15))) /* Touch indication */ 205 return false; 206 207 *x = val & 0x3fff; 208 *y = get_unaligned_be16(touchdata + 3 + (finger * 5) + 2); 209 210 return true; 211 } 212 213 static bool ili212x_check_continue_polling(const u8 *data, bool touch) 214 { 215 return touch; 216 } 217 218 static const struct ili2xxx_chip ili212x_chip = { 219 .read_reg = ili210x_read_reg, 220 .get_touch_data = ili210x_read_touch_data, 221 .parse_touch_data = ili212x_touchdata_to_coords, 222 .continue_polling = ili212x_check_continue_polling, 223 .max_touches = 10, 224 .has_calibrate_reg = true, 225 }; 226 227 static int ili251x_read_reg_common(struct i2c_client *client, 228 u8 reg, void *buf, size_t len, 229 unsigned int delay) 230 { 231 int error; 232 int ret; 233 234 ret = i2c_master_send(client, ®, 1); 235 if (ret == 1) { 236 if (delay) 237 usleep_range(delay, delay + 500); 238 239 ret = i2c_master_recv(client, buf, len); 240 if (ret == len) 241 return 0; 242 } 243 244 error = ret < 0 ? ret : -EIO; 245 dev_err(&client->dev, "%s failed: %d\n", __func__, error); 246 return ret; 247 } 248 249 static int ili251x_read_reg(struct i2c_client *client, 250 u8 reg, void *buf, size_t len) 251 { 252 return ili251x_read_reg_common(client, reg, buf, len, 5000); 253 } 254 255 static int ili251x_read_touch_data(struct i2c_client *client, u8 *data) 256 { 257 int error; 258 259 error = ili251x_read_reg_common(client, REG_TOUCHDATA, 260 data, ILI251X_DATA_SIZE1, 0); 261 if (!error && data[0] == 2) { 262 error = i2c_master_recv(client, data + ILI251X_DATA_SIZE1, 263 ILI251X_DATA_SIZE2); 264 if (error >= 0 && error != ILI251X_DATA_SIZE2) 265 error = -EIO; 266 } 267 268 return error; 269 } 270 271 static bool ili251x_touchdata_to_coords(const u8 *touchdata, 272 unsigned int finger, 273 unsigned int *x, unsigned int *y, 274 unsigned int *z) 275 { 276 u16 val; 277 278 val = get_unaligned_be16(touchdata + 1 + (finger * 5) + 0); 279 if (!(val & BIT(15))) /* Touch indication */ 280 return false; 281 282 *x = val & 0x3fff; 283 *y = get_unaligned_be16(touchdata + 1 + (finger * 5) + 2); 284 *z = touchdata[1 + (finger * 5) + 4]; 285 286 return true; 287 } 288 289 static bool ili251x_check_continue_polling(const u8 *data, bool touch) 290 { 291 return touch; 292 } 293 294 static const struct ili2xxx_chip ili251x_chip = { 295 .read_reg = ili251x_read_reg, 296 .get_touch_data = ili251x_read_touch_data, 297 .parse_touch_data = ili251x_touchdata_to_coords, 298 .continue_polling = ili251x_check_continue_polling, 299 .max_touches = 10, 300 .has_calibrate_reg = true, 301 .has_firmware_proto = true, 302 .has_pressure_reg = true, 303 }; 304 305 static bool ili210x_report_events(struct ili210x *priv, u8 *touchdata) 306 { 307 struct input_dev *input = priv->input; 308 int i; 309 bool contact = false, touch; 310 unsigned int x = 0, y = 0, z = 0; 311 312 for (i = 0; i < priv->chip->max_touches; i++) { 313 touch = priv->chip->parse_touch_data(touchdata, i, &x, &y, &z); 314 315 input_mt_slot(input, i); 316 if (input_mt_report_slot_state(input, MT_TOOL_FINGER, touch)) { 317 touchscreen_report_pos(input, &priv->prop, x, y, true); 318 if (priv->chip->has_pressure_reg) 319 input_report_abs(input, ABS_MT_PRESSURE, z); 320 contact = true; 321 } 322 } 323 324 input_mt_report_pointer_emulation(input, false); 325 input_sync(input); 326 327 return contact; 328 } 329 330 static irqreturn_t ili210x_irq(int irq, void *irq_data) 331 { 332 struct ili210x *priv = irq_data; 333 struct i2c_client *client = priv->client; 334 const struct ili2xxx_chip *chip = priv->chip; 335 u8 touchdata[ILI210X_DATA_SIZE] = { 0 }; 336 bool keep_polling; 337 ktime_t time_next; 338 s64 time_delta; 339 bool touch; 340 int error; 341 342 do { 343 time_next = ktime_add_ms(ktime_get(), ILI2XXX_POLL_PERIOD); 344 error = chip->get_touch_data(client, touchdata); 345 if (error) { 346 dev_err(&client->dev, 347 "Unable to get touch data: %d\n", error); 348 break; 349 } 350 351 touch = ili210x_report_events(priv, touchdata); 352 keep_polling = chip->continue_polling(touchdata, touch); 353 if (keep_polling) { 354 time_delta = ktime_us_delta(time_next, ktime_get()); 355 if (time_delta > 0) 356 usleep_range(time_delta, time_delta + 1000); 357 } 358 } while (!priv->stop && keep_polling); 359 360 return IRQ_HANDLED; 361 } 362 363 static int ili251x_firmware_update_resolution(struct device *dev) 364 { 365 struct i2c_client *client = to_i2c_client(dev); 366 struct ili210x *priv = i2c_get_clientdata(client); 367 u16 resx, resy; 368 u8 rs[10]; 369 int error; 370 371 /* The firmware update blob might have changed the resolution. */ 372 error = priv->chip->read_reg(client, REG_PANEL_INFO, &rs, sizeof(rs)); 373 if (error) 374 return error; 375 376 resx = le16_to_cpup((__le16 *)rs); 377 resy = le16_to_cpup((__le16 *)(rs + 2)); 378 379 /* The value reported by the firmware is invalid. */ 380 if (!resx || resx == 0xffff || !resy || resy == 0xffff) 381 return -EINVAL; 382 383 input_abs_set_max(priv->input, ABS_X, resx - 1); 384 input_abs_set_max(priv->input, ABS_Y, resy - 1); 385 input_abs_set_max(priv->input, ABS_MT_POSITION_X, resx - 1); 386 input_abs_set_max(priv->input, ABS_MT_POSITION_Y, resy - 1); 387 388 return 0; 389 } 390 391 static ssize_t ili251x_firmware_update_firmware_version(struct device *dev) 392 { 393 struct i2c_client *client = to_i2c_client(dev); 394 struct ili210x *priv = i2c_get_clientdata(client); 395 int error; 396 u8 fw[8]; 397 398 /* Get firmware version */ 399 error = priv->chip->read_reg(client, REG_FIRMWARE_VERSION, 400 &fw, sizeof(fw)); 401 if (!error) 402 memcpy(priv->version_firmware, fw, sizeof(fw)); 403 404 return error; 405 } 406 407 static ssize_t ili251x_firmware_update_kernel_version(struct device *dev) 408 { 409 struct i2c_client *client = to_i2c_client(dev); 410 struct ili210x *priv = i2c_get_clientdata(client); 411 int error; 412 u8 kv[5]; 413 414 /* Get kernel version */ 415 error = priv->chip->read_reg(client, REG_KERNEL_VERSION, 416 &kv, sizeof(kv)); 417 if (!error) 418 memcpy(priv->version_kernel, kv, sizeof(kv)); 419 420 return error; 421 } 422 423 static ssize_t ili251x_firmware_update_protocol_version(struct device *dev) 424 { 425 struct i2c_client *client = to_i2c_client(dev); 426 struct ili210x *priv = i2c_get_clientdata(client); 427 int error; 428 u8 pv[2]; 429 430 /* Get protocol version */ 431 error = priv->chip->read_reg(client, REG_PROTOCOL_VERSION, 432 &pv, sizeof(pv)); 433 if (!error) 434 memcpy(priv->version_proto, pv, sizeof(pv)); 435 436 return error; 437 } 438 439 static ssize_t ili251x_firmware_update_ic_mode(struct device *dev) 440 { 441 struct i2c_client *client = to_i2c_client(dev); 442 struct ili210x *priv = i2c_get_clientdata(client); 443 int error; 444 u8 md[2]; 445 446 /* Get chip boot mode */ 447 error = priv->chip->read_reg(client, REG_GET_MODE, &md, sizeof(md)); 448 if (!error) 449 memcpy(priv->ic_mode, md, sizeof(md)); 450 451 return error; 452 } 453 454 static int ili251x_firmware_update_cached_state(struct device *dev) 455 { 456 struct i2c_client *client = to_i2c_client(dev); 457 struct ili210x *priv = i2c_get_clientdata(client); 458 int error; 459 460 if (!priv->chip->has_firmware_proto) 461 return 0; 462 463 /* Wait for firmware to boot and stabilize itself. */ 464 msleep(200); 465 466 /* Firmware does report valid information. */ 467 error = ili251x_firmware_update_resolution(dev); 468 if (error) 469 return error; 470 471 error = ili251x_firmware_update_firmware_version(dev); 472 if (error) 473 return error; 474 475 error = ili251x_firmware_update_kernel_version(dev); 476 if (error) 477 return error; 478 479 error = ili251x_firmware_update_protocol_version(dev); 480 if (error) 481 return error; 482 483 error = ili251x_firmware_update_ic_mode(dev); 484 if (error) 485 return error; 486 487 return 0; 488 } 489 490 static ssize_t ili251x_firmware_version_show(struct device *dev, 491 struct device_attribute *attr, 492 char *buf) 493 { 494 struct i2c_client *client = to_i2c_client(dev); 495 struct ili210x *priv = i2c_get_clientdata(client); 496 u8 *fw = priv->version_firmware; 497 498 return sysfs_emit(buf, "%02x%02x.%02x%02x.%02x%02x.%02x%02x\n", 499 fw[0], fw[1], fw[2], fw[3], 500 fw[4], fw[5], fw[6], fw[7]); 501 } 502 static DEVICE_ATTR(firmware_version, 0444, ili251x_firmware_version_show, NULL); 503 504 static ssize_t ili251x_kernel_version_show(struct device *dev, 505 struct device_attribute *attr, 506 char *buf) 507 { 508 struct i2c_client *client = to_i2c_client(dev); 509 struct ili210x *priv = i2c_get_clientdata(client); 510 u8 *kv = priv->version_kernel; 511 512 return sysfs_emit(buf, "%02x.%02x.%02x.%02x.%02x\n", 513 kv[0], kv[1], kv[2], kv[3], kv[4]); 514 } 515 static DEVICE_ATTR(kernel_version, 0444, ili251x_kernel_version_show, NULL); 516 517 static ssize_t ili251x_protocol_version_show(struct device *dev, 518 struct device_attribute *attr, 519 char *buf) 520 { 521 struct i2c_client *client = to_i2c_client(dev); 522 struct ili210x *priv = i2c_get_clientdata(client); 523 u8 *pv = priv->version_proto; 524 525 return sysfs_emit(buf, "%02x.%02x\n", pv[0], pv[1]); 526 } 527 static DEVICE_ATTR(protocol_version, 0444, ili251x_protocol_version_show, NULL); 528 529 static ssize_t ili251x_mode_show(struct device *dev, 530 struct device_attribute *attr, char *buf) 531 { 532 struct i2c_client *client = to_i2c_client(dev); 533 struct ili210x *priv = i2c_get_clientdata(client); 534 u8 *md = priv->ic_mode; 535 char *mode = "AP"; 536 537 if (md[0] == REG_GET_MODE_AP) /* Application Mode */ 538 mode = "AP"; 539 else if (md[0] == REG_GET_MODE_BL) /* BootLoader Mode */ 540 mode = "BL"; 541 else /* Unknown Mode */ 542 mode = "??"; 543 544 return sysfs_emit(buf, "%02x.%02x:%s\n", md[0], md[1], mode); 545 } 546 static DEVICE_ATTR(mode, 0444, ili251x_mode_show, NULL); 547 548 static ssize_t ili210x_calibrate(struct device *dev, 549 struct device_attribute *attr, 550 const char *buf, size_t count) 551 { 552 struct i2c_client *client = to_i2c_client(dev); 553 struct ili210x *priv = i2c_get_clientdata(client); 554 unsigned long calibrate; 555 int rc; 556 u8 cmd = REG_CALIBRATE; 557 558 if (kstrtoul(buf, 10, &calibrate)) 559 return -EINVAL; 560 561 if (calibrate > 1) 562 return -EINVAL; 563 564 if (calibrate) { 565 rc = i2c_master_send(priv->client, &cmd, sizeof(cmd)); 566 if (rc != sizeof(cmd)) 567 return -EIO; 568 } 569 570 return count; 571 } 572 static DEVICE_ATTR(calibrate, S_IWUSR, NULL, ili210x_calibrate); 573 574 static int ili251x_firmware_to_buffer(const struct firmware *fw, 575 u8 **buf, u16 *ac_end, u16 *df_end) 576 { 577 const struct ihex_binrec *rec; 578 u32 fw_addr, fw_last_addr = 0; 579 u16 fw_len; 580 u8 *fw_buf; 581 int error; 582 583 /* 584 * The firmware ihex blob can never be bigger than 64 kiB, so make this 585 * simple -- allocate a 64 kiB buffer, iterate over the ihex blob records 586 * once, copy them all into this buffer at the right locations, and then 587 * do all operations on this linear buffer. 588 */ 589 fw_buf = kzalloc(SZ_64K, GFP_KERNEL); 590 if (!fw_buf) 591 return -ENOMEM; 592 593 rec = (const struct ihex_binrec *)fw->data; 594 while (rec) { 595 fw_addr = be32_to_cpu(rec->addr); 596 fw_len = be16_to_cpu(rec->len); 597 598 /* The last 32 Byte firmware block can be 0xffe0 */ 599 if (fw_addr + fw_len > SZ_64K || fw_addr > SZ_64K - 32) { 600 error = -EFBIG; 601 goto err_big; 602 } 603 604 /* Find the last address before DF start address, that is AC end */ 605 if (fw_addr == 0xf000) 606 *ac_end = fw_last_addr; 607 fw_last_addr = fw_addr + fw_len; 608 609 memcpy(fw_buf + fw_addr, rec->data, fw_len); 610 rec = ihex_next_binrec(rec); 611 } 612 613 /* DF end address is the last address in the firmware blob */ 614 *df_end = fw_addr + fw_len; 615 *buf = fw_buf; 616 return 0; 617 618 err_big: 619 kfree(fw_buf); 620 return error; 621 } 622 623 /* Switch mode between Application and BootLoader */ 624 static int ili251x_switch_ic_mode(struct i2c_client *client, u8 cmd_mode) 625 { 626 struct ili210x *priv = i2c_get_clientdata(client); 627 u8 cmd_wren[3] = { REG_WRITE_ENABLE, 0x5a, 0xa5 }; 628 u8 md[2]; 629 int error; 630 631 error = priv->chip->read_reg(client, REG_GET_MODE, md, sizeof(md)); 632 if (error) 633 return error; 634 /* Mode already set */ 635 if ((cmd_mode == REG_SET_MODE_AP && md[0] == REG_GET_MODE_AP) || 636 (cmd_mode == REG_SET_MODE_BL && md[0] == REG_GET_MODE_BL)) 637 return 0; 638 639 /* Unlock writes */ 640 error = i2c_master_send(client, cmd_wren, sizeof(cmd_wren)); 641 if (error != sizeof(cmd_wren)) 642 return -EINVAL; 643 644 mdelay(20); 645 646 /* Select mode (BootLoader or Application) */ 647 error = i2c_master_send(client, &cmd_mode, 1); 648 if (error != 1) 649 return -EINVAL; 650 651 mdelay(200); /* Reboot into bootloader takes a lot of time ... */ 652 653 /* Read back mode */ 654 error = priv->chip->read_reg(client, REG_GET_MODE, md, sizeof(md)); 655 if (error) 656 return error; 657 /* Check if mode is correct now. */ 658 if ((cmd_mode == REG_SET_MODE_AP && md[0] == REG_GET_MODE_AP) || 659 (cmd_mode == REG_SET_MODE_BL && md[0] == REG_GET_MODE_BL)) 660 return 0; 661 662 return -EINVAL; 663 } 664 665 static int ili251x_firmware_busy(struct i2c_client *client) 666 { 667 struct ili210x *priv = i2c_get_clientdata(client); 668 int error, i = 0; 669 u8 data; 670 671 do { 672 /* The read_reg already contains suitable delay */ 673 error = priv->chip->read_reg(client, REG_IC_BUSY, &data, 1); 674 if (error) 675 return error; 676 if (i++ == 100000) 677 return -ETIMEDOUT; 678 } while (data != REG_IC_BUSY_NOT_BUSY); 679 680 return 0; 681 } 682 683 static int ili251x_firmware_write_to_ic(struct device *dev, u8 *fwbuf, 684 u16 start, u16 end, u8 dataflash) 685 { 686 struct i2c_client *client = to_i2c_client(dev); 687 struct ili210x *priv = i2c_get_clientdata(client); 688 u8 cmd_crc = REG_READ_DATA_CRC; 689 u8 crcrb[4] = { 0 }; 690 u8 fw_data[33]; 691 u16 fw_addr; 692 int error; 693 694 /* 695 * The DF (dataflash) needs 2 bytes offset for unknown reasons, 696 * the AC (application) has 2 bytes CRC16-CCITT at the end. 697 */ 698 u16 crc = crc_ccitt(0, fwbuf + start + (dataflash ? 2 : 0), 699 end - start - 2); 700 701 /* Unlock write to either AC (application) or DF (dataflash) area */ 702 u8 cmd_wr[10] = { 703 REG_WRITE_ENABLE, 0x5a, 0xa5, dataflash, 704 (end >> 16) & 0xff, (end >> 8) & 0xff, end & 0xff, 705 (crc >> 16) & 0xff, (crc >> 8) & 0xff, crc & 0xff 706 }; 707 708 error = i2c_master_send(client, cmd_wr, sizeof(cmd_wr)); 709 if (error != sizeof(cmd_wr)) 710 return -EINVAL; 711 712 error = ili251x_firmware_busy(client); 713 if (error) 714 return error; 715 716 for (fw_addr = start; fw_addr < end; fw_addr += 32) { 717 fw_data[0] = REG_WRITE_DATA; 718 memcpy(&(fw_data[1]), fwbuf + fw_addr, 32); 719 error = i2c_master_send(client, fw_data, 33); 720 if (error != sizeof(fw_data)) 721 return error; 722 error = ili251x_firmware_busy(client); 723 if (error) 724 return error; 725 } 726 727 error = i2c_master_send(client, &cmd_crc, 1); 728 if (error != 1) 729 return -EINVAL; 730 731 error = ili251x_firmware_busy(client); 732 if (error) 733 return error; 734 735 error = priv->chip->read_reg(client, REG_READ_DATA_CRC, 736 &crcrb, sizeof(crcrb)); 737 if (error) 738 return error; 739 740 /* Check CRC readback */ 741 if ((crcrb[0] != (crc & 0xff)) || crcrb[1] != ((crc >> 8) & 0xff)) 742 return -EINVAL; 743 744 return 0; 745 } 746 747 static int ili251x_firmware_reset(struct i2c_client *client) 748 { 749 u8 cmd_reset[2] = { 0xf2, 0x01 }; 750 int error; 751 752 error = i2c_master_send(client, cmd_reset, sizeof(cmd_reset)); 753 if (error != sizeof(cmd_reset)) 754 return -EINVAL; 755 756 return ili251x_firmware_busy(client); 757 } 758 759 static void ili210x_hardware_reset(struct gpio_desc *reset_gpio) 760 { 761 /* Reset the controller */ 762 gpiod_set_value_cansleep(reset_gpio, 1); 763 usleep_range(12000, 15000); 764 gpiod_set_value_cansleep(reset_gpio, 0); 765 msleep(300); 766 } 767 768 static ssize_t ili210x_firmware_update_store(struct device *dev, 769 struct device_attribute *attr, 770 const char *buf, size_t count) 771 { 772 struct i2c_client *client = to_i2c_client(dev); 773 struct ili210x *priv = i2c_get_clientdata(client); 774 const char *fwname = ILI251X_FW_FILENAME; 775 const struct firmware *fw; 776 u16 ac_end, df_end; 777 u8 *fwbuf; 778 int error; 779 int i; 780 781 error = request_ihex_firmware(&fw, fwname, dev); 782 if (error) { 783 dev_err(dev, "Failed to request firmware %s, error=%d\n", 784 fwname, error); 785 return error; 786 } 787 788 error = ili251x_firmware_to_buffer(fw, &fwbuf, &ac_end, &df_end); 789 release_firmware(fw); 790 if (error) 791 return error; 792 793 /* 794 * Disable touchscreen IRQ, so that we would not get spurious touch 795 * interrupt during firmware update, and so that the IRQ handler won't 796 * trigger and interfere with the firmware update. There is no bit in 797 * the touch controller to disable the IRQs during update, so we have 798 * to do it this way here. 799 */ 800 disable_irq(client->irq); 801 802 dev_dbg(dev, "Firmware update started, firmware=%s\n", fwname); 803 804 ili210x_hardware_reset(priv->reset_gpio); 805 806 error = ili251x_firmware_reset(client); 807 if (error) 808 goto exit; 809 810 /* This may not succeed on first try, so re-try a few times. */ 811 for (i = 0; i < 5; i++) { 812 error = ili251x_switch_ic_mode(client, REG_SET_MODE_BL); 813 if (!error) 814 break; 815 } 816 817 if (error) 818 goto exit; 819 820 dev_dbg(dev, "IC is now in BootLoader mode\n"); 821 822 msleep(200); /* The bootloader seems to need some time too. */ 823 824 error = ili251x_firmware_write_to_ic(dev, fwbuf, 0xf000, df_end, 1); 825 if (error) { 826 dev_err(dev, "DF firmware update failed, error=%d\n", error); 827 goto exit; 828 } 829 830 dev_dbg(dev, "DataFlash firmware written\n"); 831 832 error = ili251x_firmware_write_to_ic(dev, fwbuf, 0x2000, ac_end, 0); 833 if (error) { 834 dev_err(dev, "AC firmware update failed, error=%d\n", error); 835 goto exit; 836 } 837 838 dev_dbg(dev, "Application firmware written\n"); 839 840 /* This may not succeed on first try, so re-try a few times. */ 841 for (i = 0; i < 5; i++) { 842 error = ili251x_switch_ic_mode(client, REG_SET_MODE_AP); 843 if (!error) 844 break; 845 } 846 847 if (error) 848 goto exit; 849 850 dev_dbg(dev, "IC is now in Application mode\n"); 851 852 error = ili251x_firmware_update_cached_state(dev); 853 if (error) 854 goto exit; 855 856 error = count; 857 858 exit: 859 ili210x_hardware_reset(priv->reset_gpio); 860 dev_dbg(dev, "Firmware update ended, error=%i\n", error); 861 enable_irq(client->irq); 862 kfree(fwbuf); 863 return error; 864 } 865 866 static DEVICE_ATTR(firmware_update, 0200, NULL, ili210x_firmware_update_store); 867 868 static struct attribute *ili210x_attributes[] = { 869 &dev_attr_calibrate.attr, 870 &dev_attr_firmware_update.attr, 871 &dev_attr_firmware_version.attr, 872 &dev_attr_kernel_version.attr, 873 &dev_attr_protocol_version.attr, 874 &dev_attr_mode.attr, 875 NULL, 876 }; 877 878 static umode_t ili210x_attributes_visible(struct kobject *kobj, 879 struct attribute *attr, int index) 880 { 881 struct device *dev = kobj_to_dev(kobj); 882 struct i2c_client *client = to_i2c_client(dev); 883 struct ili210x *priv = i2c_get_clientdata(client); 884 885 /* Calibrate is present on all ILI2xxx which have calibrate register */ 886 if (attr == &dev_attr_calibrate.attr) 887 return priv->chip->has_calibrate_reg ? attr->mode : 0; 888 889 /* Firmware/Kernel/Protocol/BootMode is implememted only for ILI251x */ 890 if (!priv->chip->has_firmware_proto) 891 return 0; 892 893 return attr->mode; 894 } 895 896 static const struct attribute_group ili210x_attr_group = { 897 .attrs = ili210x_attributes, 898 .is_visible = ili210x_attributes_visible, 899 }; 900 901 static void ili210x_power_down(void *data) 902 { 903 struct gpio_desc *reset_gpio = data; 904 905 gpiod_set_value_cansleep(reset_gpio, 1); 906 } 907 908 static void ili210x_stop(void *data) 909 { 910 struct ili210x *priv = data; 911 912 /* Tell ISR to quit even if there is a contact. */ 913 priv->stop = true; 914 } 915 916 static int ili210x_i2c_probe(struct i2c_client *client, 917 const struct i2c_device_id *id) 918 { 919 struct device *dev = &client->dev; 920 const struct ili2xxx_chip *chip; 921 struct ili210x *priv; 922 struct gpio_desc *reset_gpio; 923 struct input_dev *input; 924 int error; 925 unsigned int max_xy; 926 927 dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver"); 928 929 chip = device_get_match_data(dev); 930 if (!chip && id) 931 chip = (const struct ili2xxx_chip *)id->driver_data; 932 if (!chip) { 933 dev_err(&client->dev, "unknown device model\n"); 934 return -ENODEV; 935 } 936 937 if (client->irq <= 0) { 938 dev_err(dev, "No IRQ!\n"); 939 return -EINVAL; 940 } 941 942 reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); 943 if (IS_ERR(reset_gpio)) 944 return PTR_ERR(reset_gpio); 945 946 if (reset_gpio) { 947 error = devm_add_action_or_reset(dev, ili210x_power_down, 948 reset_gpio); 949 if (error) 950 return error; 951 952 ili210x_hardware_reset(reset_gpio); 953 } 954 955 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); 956 if (!priv) 957 return -ENOMEM; 958 959 input = devm_input_allocate_device(dev); 960 if (!input) 961 return -ENOMEM; 962 963 priv->client = client; 964 priv->input = input; 965 priv->reset_gpio = reset_gpio; 966 priv->chip = chip; 967 i2c_set_clientdata(client, priv); 968 969 /* Setup input device */ 970 input->name = "ILI210x Touchscreen"; 971 input->id.bustype = BUS_I2C; 972 973 /* Multi touch */ 974 max_xy = (chip->resolution ?: SZ_64K) - 1; 975 input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_xy, 0, 0); 976 input_set_abs_params(input, ABS_MT_POSITION_Y, 0, max_xy, 0, 0); 977 if (priv->chip->has_pressure_reg) 978 input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xa, 0, 0); 979 error = ili251x_firmware_update_cached_state(dev); 980 if (error) { 981 dev_err(dev, "Unable to cache firmware information, err: %d\n", 982 error); 983 return error; 984 } 985 touchscreen_parse_properties(input, true, &priv->prop); 986 987 error = input_mt_init_slots(input, priv->chip->max_touches, 988 INPUT_MT_DIRECT); 989 if (error) { 990 dev_err(dev, "Unable to set up slots, err: %d\n", error); 991 return error; 992 } 993 994 error = devm_request_threaded_irq(dev, client->irq, NULL, ili210x_irq, 995 IRQF_ONESHOT, client->name, priv); 996 if (error) { 997 dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n", 998 error); 999 return error; 1000 } 1001 1002 error = devm_add_action_or_reset(dev, ili210x_stop, priv); 1003 if (error) 1004 return error; 1005 1006 error = devm_device_add_group(dev, &ili210x_attr_group); 1007 if (error) { 1008 dev_err(dev, "Unable to create sysfs attributes, err: %d\n", 1009 error); 1010 return error; 1011 } 1012 1013 error = input_register_device(priv->input); 1014 if (error) { 1015 dev_err(dev, "Cannot register input device, err: %d\n", error); 1016 return error; 1017 } 1018 1019 return 0; 1020 } 1021 1022 static const struct i2c_device_id ili210x_i2c_id[] = { 1023 { "ili210x", (long)&ili210x_chip }, 1024 { "ili2117", (long)&ili211x_chip }, 1025 { "ili2120", (long)&ili212x_chip }, 1026 { "ili251x", (long)&ili251x_chip }, 1027 { } 1028 }; 1029 MODULE_DEVICE_TABLE(i2c, ili210x_i2c_id); 1030 1031 static const struct of_device_id ili210x_dt_ids[] = { 1032 { .compatible = "ilitek,ili210x", .data = &ili210x_chip }, 1033 { .compatible = "ilitek,ili2117", .data = &ili211x_chip }, 1034 { .compatible = "ilitek,ili2120", .data = &ili212x_chip }, 1035 { .compatible = "ilitek,ili251x", .data = &ili251x_chip }, 1036 { } 1037 }; 1038 MODULE_DEVICE_TABLE(of, ili210x_dt_ids); 1039 1040 static struct i2c_driver ili210x_ts_driver = { 1041 .driver = { 1042 .name = "ili210x_i2c", 1043 .of_match_table = ili210x_dt_ids, 1044 }, 1045 .id_table = ili210x_i2c_id, 1046 .probe = ili210x_i2c_probe, 1047 }; 1048 1049 module_i2c_driver(ili210x_ts_driver); 1050 1051 MODULE_AUTHOR("Olivier Sobrie <olivier@sobrie.be>"); 1052 MODULE_DESCRIPTION("ILI210X I2C Touchscreen Driver"); 1053 MODULE_LICENSE("GPL"); 1054