1 /* 2 * Elo serial touchscreen driver 3 * 4 * Copyright (c) 2004 Vojtech Pavlik 5 */ 6 7 /* 8 * This program is free software; you can redistribute it and/or modify it 9 * under the terms of the GNU General Public License version 2 as published by 10 * the Free Software Foundation. 11 */ 12 13 /* 14 * This driver can handle serial Elo touchscreens using either the Elo standard 15 * 'E271-2210' 10-byte protocol, Elo legacy 'E281A-4002' 6-byte protocol, Elo 16 * legacy 'E271-140' 4-byte protocol and Elo legacy 'E261-280' 3-byte protocol. 17 */ 18 19 #include <linux/errno.h> 20 #include <linux/kernel.h> 21 #include <linux/module.h> 22 #include <linux/slab.h> 23 #include <linux/input.h> 24 #include <linux/serio.h> 25 #include <linux/ctype.h> 26 27 #define DRIVER_DESC "Elo serial touchscreen driver" 28 29 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); 30 MODULE_DESCRIPTION(DRIVER_DESC); 31 MODULE_LICENSE("GPL"); 32 33 /* 34 * Definitions & global arrays. 35 */ 36 37 #define ELO_MAX_LENGTH 10 38 39 #define ELO10_PACKET_LEN 8 40 #define ELO10_TOUCH 0x03 41 #define ELO10_PRESSURE 0x80 42 43 #define ELO10_LEAD_BYTE 'U' 44 45 #define ELO10_ID_CMD 'i' 46 47 #define ELO10_TOUCH_PACKET 'T' 48 #define ELO10_ACK_PACKET 'A' 49 #define ELI10_ID_PACKET 'I' 50 51 /* 52 * Per-touchscreen data. 53 */ 54 55 struct elo { 56 struct input_dev *dev; 57 struct serio *serio; 58 struct mutex cmd_mutex; 59 struct completion cmd_done; 60 int id; 61 int idx; 62 unsigned char expected_packet; 63 unsigned char csum; 64 unsigned char data[ELO_MAX_LENGTH]; 65 unsigned char response[ELO10_PACKET_LEN]; 66 char phys[32]; 67 }; 68 69 static void elo_process_data_10(struct elo *elo, unsigned char data) 70 { 71 struct input_dev *dev = elo->dev; 72 73 elo->data[elo->idx] = data; 74 75 switch (elo->idx++) { 76 case 0: 77 elo->csum = 0xaa; 78 if (data != ELO10_LEAD_BYTE) { 79 dev_dbg(&elo->serio->dev, 80 "unsynchronized data: 0x%02x\n", data); 81 elo->idx = 0; 82 } 83 break; 84 85 case 9: 86 elo->idx = 0; 87 if (data != elo->csum) { 88 dev_dbg(&elo->serio->dev, 89 "bad checksum: 0x%02x, expected 0x%02x\n", 90 data, elo->csum); 91 break; 92 } 93 if (elo->data[1] != elo->expected_packet) { 94 if (elo->data[1] != ELO10_TOUCH_PACKET) 95 dev_dbg(&elo->serio->dev, 96 "unexpected packet: 0x%02x\n", 97 elo->data[1]); 98 break; 99 } 100 if (likely(elo->data[1] == ELO10_TOUCH_PACKET)) { 101 input_report_abs(dev, ABS_X, (elo->data[4] << 8) | elo->data[3]); 102 input_report_abs(dev, ABS_Y, (elo->data[6] << 8) | elo->data[5]); 103 if (elo->data[2] & ELO10_PRESSURE) 104 input_report_abs(dev, ABS_PRESSURE, 105 (elo->data[8] << 8) | elo->data[7]); 106 input_report_key(dev, BTN_TOUCH, elo->data[2] & ELO10_TOUCH); 107 input_sync(dev); 108 } else if (elo->data[1] == ELO10_ACK_PACKET) { 109 if (elo->data[2] == '0') 110 elo->expected_packet = ELO10_TOUCH_PACKET; 111 complete(&elo->cmd_done); 112 } else { 113 memcpy(elo->response, &elo->data[1], ELO10_PACKET_LEN); 114 elo->expected_packet = ELO10_ACK_PACKET; 115 } 116 break; 117 } 118 elo->csum += data; 119 } 120 121 static void elo_process_data_6(struct elo *elo, unsigned char data) 122 { 123 struct input_dev *dev = elo->dev; 124 125 elo->data[elo->idx] = data; 126 127 switch (elo->idx++) { 128 129 case 0: 130 if ((data & 0xc0) != 0xc0) 131 elo->idx = 0; 132 break; 133 134 case 1: 135 if ((data & 0xc0) != 0x80) 136 elo->idx = 0; 137 break; 138 139 case 2: 140 if ((data & 0xc0) != 0x40) 141 elo->idx = 0; 142 break; 143 144 case 3: 145 if (data & 0xc0) { 146 elo->idx = 0; 147 break; 148 } 149 150 input_report_abs(dev, ABS_X, ((elo->data[0] & 0x3f) << 6) | (elo->data[1] & 0x3f)); 151 input_report_abs(dev, ABS_Y, ((elo->data[2] & 0x3f) << 6) | (elo->data[3] & 0x3f)); 152 153 if (elo->id == 2) { 154 input_report_key(dev, BTN_TOUCH, 1); 155 input_sync(dev); 156 elo->idx = 0; 157 } 158 159 break; 160 161 case 4: 162 if (data) { 163 input_sync(dev); 164 elo->idx = 0; 165 } 166 break; 167 168 case 5: 169 if ((data & 0xf0) == 0) { 170 input_report_abs(dev, ABS_PRESSURE, elo->data[5]); 171 input_report_key(dev, BTN_TOUCH, !!elo->data[5]); 172 } 173 input_sync(dev); 174 elo->idx = 0; 175 break; 176 } 177 } 178 179 static void elo_process_data_3(struct elo *elo, unsigned char data) 180 { 181 struct input_dev *dev = elo->dev; 182 183 elo->data[elo->idx] = data; 184 185 switch (elo->idx++) { 186 187 case 0: 188 if ((data & 0x7f) != 0x01) 189 elo->idx = 0; 190 break; 191 case 2: 192 input_report_key(dev, BTN_TOUCH, !(elo->data[1] & 0x80)); 193 input_report_abs(dev, ABS_X, elo->data[1]); 194 input_report_abs(dev, ABS_Y, elo->data[2]); 195 input_sync(dev); 196 elo->idx = 0; 197 break; 198 } 199 } 200 201 static irqreturn_t elo_interrupt(struct serio *serio, 202 unsigned char data, unsigned int flags) 203 { 204 struct elo *elo = serio_get_drvdata(serio); 205 206 switch (elo->id) { 207 case 0: 208 elo_process_data_10(elo, data); 209 break; 210 211 case 1: 212 case 2: 213 elo_process_data_6(elo, data); 214 break; 215 216 case 3: 217 elo_process_data_3(elo, data); 218 break; 219 } 220 221 return IRQ_HANDLED; 222 } 223 224 static int elo_command_10(struct elo *elo, unsigned char *packet) 225 { 226 int rc = -1; 227 int i; 228 unsigned char csum = 0xaa + ELO10_LEAD_BYTE; 229 230 mutex_lock(&elo->cmd_mutex); 231 232 serio_pause_rx(elo->serio); 233 elo->expected_packet = toupper(packet[0]); 234 init_completion(&elo->cmd_done); 235 serio_continue_rx(elo->serio); 236 237 if (serio_write(elo->serio, ELO10_LEAD_BYTE)) 238 goto out; 239 240 for (i = 0; i < ELO10_PACKET_LEN; i++) { 241 csum += packet[i]; 242 if (serio_write(elo->serio, packet[i])) 243 goto out; 244 } 245 246 if (serio_write(elo->serio, csum)) 247 goto out; 248 249 wait_for_completion_timeout(&elo->cmd_done, HZ); 250 251 if (elo->expected_packet == ELO10_TOUCH_PACKET) { 252 /* We are back in reporting mode, the command was ACKed */ 253 memcpy(packet, elo->response, ELO10_PACKET_LEN); 254 rc = 0; 255 } 256 257 out: 258 mutex_unlock(&elo->cmd_mutex); 259 return rc; 260 } 261 262 static int elo_setup_10(struct elo *elo) 263 { 264 static const char *elo_types[] = { "Accu", "Dura", "Intelli", "Carroll" }; 265 struct input_dev *dev = elo->dev; 266 unsigned char packet[ELO10_PACKET_LEN] = { ELO10_ID_CMD }; 267 268 if (elo_command_10(elo, packet)) 269 return -1; 270 271 dev->id.version = (packet[5] << 8) | packet[4]; 272 273 input_set_abs_params(dev, ABS_X, 96, 4000, 0, 0); 274 input_set_abs_params(dev, ABS_Y, 96, 4000, 0, 0); 275 if (packet[3] & ELO10_PRESSURE) 276 input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0); 277 278 dev_info(&elo->serio->dev, 279 "%sTouch touchscreen, fw: %02x.%02x, features: 0x%02x, controller: 0x%02x\n", 280 elo_types[(packet[1] -'0') & 0x03], 281 packet[5], packet[4], packet[3], packet[7]); 282 283 return 0; 284 } 285 286 /* 287 * elo_disconnect() is the opposite of elo_connect() 288 */ 289 290 static void elo_disconnect(struct serio *serio) 291 { 292 struct elo *elo = serio_get_drvdata(serio); 293 294 input_get_device(elo->dev); 295 input_unregister_device(elo->dev); 296 serio_close(serio); 297 serio_set_drvdata(serio, NULL); 298 input_put_device(elo->dev); 299 kfree(elo); 300 } 301 302 /* 303 * elo_connect() is the routine that is called when someone adds a 304 * new serio device that supports Gunze protocol and registers it as 305 * an input device. 306 */ 307 308 static int elo_connect(struct serio *serio, struct serio_driver *drv) 309 { 310 struct elo *elo; 311 struct input_dev *input_dev; 312 int err; 313 314 elo = kzalloc(sizeof(struct elo), GFP_KERNEL); 315 input_dev = input_allocate_device(); 316 if (!elo || !input_dev) { 317 err = -ENOMEM; 318 goto fail1; 319 } 320 321 elo->serio = serio; 322 elo->id = serio->id.id; 323 elo->dev = input_dev; 324 elo->expected_packet = ELO10_TOUCH_PACKET; 325 mutex_init(&elo->cmd_mutex); 326 init_completion(&elo->cmd_done); 327 snprintf(elo->phys, sizeof(elo->phys), "%s/input0", serio->phys); 328 329 input_dev->name = "Elo Serial TouchScreen"; 330 input_dev->phys = elo->phys; 331 input_dev->id.bustype = BUS_RS232; 332 input_dev->id.vendor = SERIO_ELO; 333 input_dev->id.product = elo->id; 334 input_dev->id.version = 0x0100; 335 input_dev->dev.parent = &serio->dev; 336 337 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); 338 input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); 339 340 serio_set_drvdata(serio, elo); 341 err = serio_open(serio, drv); 342 if (err) 343 goto fail2; 344 345 switch (elo->id) { 346 347 case 0: /* 10-byte protocol */ 348 if (elo_setup_10(elo)) 349 goto fail3; 350 351 break; 352 353 case 1: /* 6-byte protocol */ 354 input_set_abs_params(input_dev, ABS_PRESSURE, 0, 15, 0, 0); 355 /* fall through */ 356 357 case 2: /* 4-byte protocol */ 358 input_set_abs_params(input_dev, ABS_X, 96, 4000, 0, 0); 359 input_set_abs_params(input_dev, ABS_Y, 96, 4000, 0, 0); 360 break; 361 362 case 3: /* 3-byte protocol */ 363 input_set_abs_params(input_dev, ABS_X, 0, 255, 0, 0); 364 input_set_abs_params(input_dev, ABS_Y, 0, 255, 0, 0); 365 break; 366 } 367 368 err = input_register_device(elo->dev); 369 if (err) 370 goto fail3; 371 372 return 0; 373 374 fail3: serio_close(serio); 375 fail2: serio_set_drvdata(serio, NULL); 376 fail1: input_free_device(input_dev); 377 kfree(elo); 378 return err; 379 } 380 381 /* 382 * The serio driver structure. 383 */ 384 385 static const struct serio_device_id elo_serio_ids[] = { 386 { 387 .type = SERIO_RS232, 388 .proto = SERIO_ELO, 389 .id = SERIO_ANY, 390 .extra = SERIO_ANY, 391 }, 392 { 0 } 393 }; 394 395 MODULE_DEVICE_TABLE(serio, elo_serio_ids); 396 397 static struct serio_driver elo_drv = { 398 .driver = { 399 .name = "elo", 400 }, 401 .description = DRIVER_DESC, 402 .id_table = elo_serio_ids, 403 .interrupt = elo_interrupt, 404 .connect = elo_connect, 405 .disconnect = elo_disconnect, 406 }; 407 408 module_serio_driver(elo_drv); 409