1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Elan Microelectronics touch panels with I2C interface 4 * 5 * Copyright (C) 2014 Elan Microelectronics Corporation. 6 * Scott Liu <scott.liu@emc.com.tw> 7 * 8 * This code is partly based on hid-multitouch.c: 9 * 10 * Copyright (c) 2010-2012 Stephane Chatty <chatty@enac.fr> 11 * Copyright (c) 2010-2012 Benjamin Tissoires <benjamin.tissoires@gmail.com> 12 * Copyright (c) 2010-2012 Ecole Nationale de l'Aviation Civile, France 13 * 14 * This code is partly based on i2c-hid.c: 15 * 16 * Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@gmail.com> 17 * Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France 18 * Copyright (c) 2012 Red Hat, Inc 19 */ 20 21 22 #include <linux/bits.h> 23 #include <linux/module.h> 24 #include <linux/input.h> 25 #include <linux/interrupt.h> 26 #include <linux/irq.h> 27 #include <linux/platform_device.h> 28 #include <linux/async.h> 29 #include <linux/i2c.h> 30 #include <linux/delay.h> 31 #include <linux/uaccess.h> 32 #include <linux/buffer_head.h> 33 #include <linux/slab.h> 34 #include <linux/firmware.h> 35 #include <linux/input/mt.h> 36 #include <linux/input/touchscreen.h> 37 #include <linux/acpi.h> 38 #include <linux/of.h> 39 #include <linux/gpio/consumer.h> 40 #include <linux/regulator/consumer.h> 41 #include <linux/uuid.h> 42 #include <asm/unaligned.h> 43 44 /* Device, Driver information */ 45 #define DEVICE_NAME "elants_i2c" 46 47 /* Convert from rows or columns into resolution */ 48 #define ELAN_TS_RESOLUTION(n, m) (((n) - 1) * (m)) 49 50 /* FW header data */ 51 #define HEADER_SIZE 4 52 #define FW_HDR_TYPE 0 53 #define FW_HDR_COUNT 1 54 #define FW_HDR_LENGTH 2 55 56 /* Buffer mode Queue Header information */ 57 #define QUEUE_HEADER_SINGLE 0x62 58 #define QUEUE_HEADER_NORMAL 0X63 59 #define QUEUE_HEADER_WAIT 0x64 60 #define QUEUE_HEADER_NORMAL2 0x66 61 62 /* Command header definition */ 63 #define CMD_HEADER_WRITE 0x54 64 #define CMD_HEADER_READ 0x53 65 #define CMD_HEADER_6B_READ 0x5B 66 #define CMD_HEADER_ROM_READ 0x96 67 #define CMD_HEADER_RESP 0x52 68 #define CMD_HEADER_6B_RESP 0x9B 69 #define CMD_HEADER_ROM_RESP 0x95 70 #define CMD_HEADER_HELLO 0x55 71 #define CMD_HEADER_REK 0x66 72 73 /* FW position data */ 74 #define PACKET_SIZE_OLD 40 75 #define PACKET_SIZE 55 76 #define MAX_CONTACT_NUM 10 77 #define FW_POS_HEADER 0 78 #define FW_POS_STATE 1 79 #define FW_POS_TOTAL 2 80 #define FW_POS_XY 3 81 #define FW_POS_TOOL_TYPE 33 82 #define FW_POS_CHECKSUM 34 83 #define FW_POS_WIDTH 35 84 #define FW_POS_PRESSURE 45 85 86 #define HEADER_REPORT_10_FINGER 0x62 87 88 /* Header (4 bytes) plus 3 full 10-finger packets */ 89 #define MAX_PACKET_SIZE 169 90 91 #define BOOT_TIME_DELAY_MS 50 92 93 /* FW read command, 0x53 0x?? 0x0, 0x01 */ 94 #define E_ELAN_INFO_FW_VER 0x00 95 #define E_ELAN_INFO_BC_VER 0x10 96 #define E_ELAN_INFO_X_RES 0x60 97 #define E_ELAN_INFO_Y_RES 0x63 98 #define E_ELAN_INFO_REK 0xD0 99 #define E_ELAN_INFO_TEST_VER 0xE0 100 #define E_ELAN_INFO_FW_ID 0xF0 101 #define E_INFO_OSR 0xD6 102 #define E_INFO_PHY_SCAN 0xD7 103 #define E_INFO_PHY_DRIVER 0xD8 104 105 /* FW write command, 0x54 0x?? 0x0, 0x01 */ 106 #define E_POWER_STATE_SLEEP 0x50 107 #define E_POWER_STATE_RESUME 0x58 108 109 #define MAX_RETRIES 3 110 #define MAX_FW_UPDATE_RETRIES 30 111 112 #define ELAN_FW_PAGESIZE 132 113 114 /* calibration timeout definition */ 115 #define ELAN_CALI_TIMEOUT_MSEC 12000 116 117 #define ELAN_POWERON_DELAY_USEC 500 118 #define ELAN_RESET_DELAY_MSEC 20 119 120 /* FW boot code version */ 121 #define BC_VER_H_BYTE_FOR_EKTH3900x1_I2C 0x72 122 #define BC_VER_H_BYTE_FOR_EKTH3900x2_I2C 0x82 123 #define BC_VER_H_BYTE_FOR_EKTH3900x3_I2C 0x92 124 #define BC_VER_H_BYTE_FOR_EKTH5312x1_I2C 0x6D 125 #define BC_VER_H_BYTE_FOR_EKTH5312x2_I2C 0x6E 126 #define BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C 0x77 127 #define BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C 0x78 128 #define BC_VER_H_BYTE_FOR_EKTH5312x1_I2C_USB 0x67 129 #define BC_VER_H_BYTE_FOR_EKTH5312x2_I2C_USB 0x68 130 #define BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C_USB 0x74 131 #define BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C_USB 0x75 132 133 enum elants_chip_id { 134 EKTH3500, 135 EKTF3624, 136 }; 137 138 enum elants_state { 139 ELAN_STATE_NORMAL, 140 ELAN_WAIT_QUEUE_HEADER, 141 ELAN_WAIT_RECALIBRATION, 142 }; 143 144 enum elants_iap_mode { 145 ELAN_IAP_OPERATIONAL, 146 ELAN_IAP_RECOVERY, 147 }; 148 149 /* struct elants_data - represents state of Elan touchscreen device */ 150 struct elants_data { 151 struct i2c_client *client; 152 struct input_dev *input; 153 154 struct regulator *vcc33; 155 struct regulator *vccio; 156 struct gpio_desc *reset_gpio; 157 158 u16 fw_version; 159 u8 test_version; 160 u8 solution_version; 161 u8 bc_version; 162 u8 iap_version; 163 u16 hw_version; 164 u8 major_res; 165 unsigned int x_res; /* resolution in units/mm */ 166 unsigned int y_res; 167 unsigned int x_max; 168 unsigned int y_max; 169 unsigned int phy_x; 170 unsigned int phy_y; 171 struct touchscreen_properties prop; 172 173 enum elants_state state; 174 enum elants_chip_id chip_id; 175 enum elants_iap_mode iap_mode; 176 177 /* Guards against concurrent access to the device via sysfs */ 178 struct mutex sysfs_mutex; 179 180 u8 cmd_resp[HEADER_SIZE]; 181 struct completion cmd_done; 182 183 bool wake_irq_enabled; 184 bool keep_power_in_suspend; 185 186 /* Must be last to be used for DMA operations */ 187 u8 buf[MAX_PACKET_SIZE] ____cacheline_aligned; 188 }; 189 190 static int elants_i2c_send(struct i2c_client *client, 191 const void *data, size_t size) 192 { 193 int ret; 194 195 ret = i2c_master_send(client, data, size); 196 if (ret == size) 197 return 0; 198 199 if (ret >= 0) 200 ret = -EIO; 201 202 dev_err(&client->dev, "%s failed (%*ph): %d\n", 203 __func__, (int)size, data, ret); 204 205 return ret; 206 } 207 208 static int elants_i2c_read(struct i2c_client *client, void *data, size_t size) 209 { 210 int ret; 211 212 ret = i2c_master_recv(client, data, size); 213 if (ret == size) 214 return 0; 215 216 if (ret >= 0) 217 ret = -EIO; 218 219 dev_err(&client->dev, "%s failed: %d\n", __func__, ret); 220 221 return ret; 222 } 223 224 static int elants_i2c_execute_command(struct i2c_client *client, 225 const u8 *cmd, size_t cmd_size, 226 u8 *resp, size_t resp_size, 227 int retries, const char *cmd_name) 228 { 229 struct i2c_msg msgs[2]; 230 int ret; 231 u8 expected_response; 232 233 switch (cmd[0]) { 234 case CMD_HEADER_READ: 235 expected_response = CMD_HEADER_RESP; 236 break; 237 238 case CMD_HEADER_6B_READ: 239 expected_response = CMD_HEADER_6B_RESP; 240 break; 241 242 case CMD_HEADER_ROM_READ: 243 expected_response = CMD_HEADER_ROM_RESP; 244 break; 245 246 default: 247 dev_err(&client->dev, "(%s): invalid command: %*ph\n", 248 cmd_name, (int)cmd_size, cmd); 249 return -EINVAL; 250 } 251 252 for (;;) { 253 msgs[0].addr = client->addr; 254 msgs[0].flags = client->flags & I2C_M_TEN; 255 msgs[0].len = cmd_size; 256 msgs[0].buf = (u8 *)cmd; 257 258 msgs[1].addr = client->addr; 259 msgs[1].flags = (client->flags & I2C_M_TEN) | I2C_M_RD; 260 msgs[1].flags |= I2C_M_RD; 261 msgs[1].len = resp_size; 262 msgs[1].buf = resp; 263 264 ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); 265 if (ret < 0) { 266 if (--retries > 0) { 267 dev_dbg(&client->dev, 268 "(%s) I2C transfer failed: %pe (retrying)\n", 269 cmd_name, ERR_PTR(ret)); 270 continue; 271 } 272 273 dev_err(&client->dev, 274 "(%s) I2C transfer failed: %pe\n", 275 cmd_name, ERR_PTR(ret)); 276 return ret; 277 } 278 279 if (ret != ARRAY_SIZE(msgs) || 280 resp[FW_HDR_TYPE] != expected_response) { 281 if (--retries > 0) { 282 dev_dbg(&client->dev, 283 "(%s) unexpected response: %*ph (retrying)\n", 284 cmd_name, ret, resp); 285 continue; 286 } 287 288 dev_err(&client->dev, 289 "(%s) unexpected response: %*ph\n", 290 cmd_name, ret, resp); 291 return -EIO; 292 } 293 294 return 0; 295 } 296 } 297 298 static int elants_i2c_calibrate(struct elants_data *ts) 299 { 300 struct i2c_client *client = ts->client; 301 int ret, error; 302 static const u8 w_flashkey[] = { CMD_HEADER_WRITE, 0xC0, 0xE1, 0x5A }; 303 static const u8 rek[] = { CMD_HEADER_WRITE, 0x29, 0x00, 0x01 }; 304 static const u8 rek_resp[] = { CMD_HEADER_REK, 0x66, 0x66, 0x66 }; 305 306 disable_irq(client->irq); 307 308 ts->state = ELAN_WAIT_RECALIBRATION; 309 reinit_completion(&ts->cmd_done); 310 311 elants_i2c_send(client, w_flashkey, sizeof(w_flashkey)); 312 elants_i2c_send(client, rek, sizeof(rek)); 313 314 enable_irq(client->irq); 315 316 ret = wait_for_completion_interruptible_timeout(&ts->cmd_done, 317 msecs_to_jiffies(ELAN_CALI_TIMEOUT_MSEC)); 318 319 ts->state = ELAN_STATE_NORMAL; 320 321 if (ret <= 0) { 322 error = ret < 0 ? ret : -ETIMEDOUT; 323 dev_err(&client->dev, 324 "error while waiting for calibration to complete: %d\n", 325 error); 326 return error; 327 } 328 329 if (memcmp(rek_resp, ts->cmd_resp, sizeof(rek_resp))) { 330 dev_err(&client->dev, 331 "unexpected calibration response: %*ph\n", 332 (int)sizeof(ts->cmd_resp), ts->cmd_resp); 333 return -EINVAL; 334 } 335 336 return 0; 337 } 338 339 static int elants_i2c_sw_reset(struct i2c_client *client) 340 { 341 const u8 soft_rst_cmd[] = { 0x77, 0x77, 0x77, 0x77 }; 342 int error; 343 344 error = elants_i2c_send(client, soft_rst_cmd, 345 sizeof(soft_rst_cmd)); 346 if (error) { 347 dev_err(&client->dev, "software reset failed: %d\n", error); 348 return error; 349 } 350 351 /* 352 * We should wait at least 10 msec (but no more than 40) before 353 * sending fastboot or IAP command to the device. 354 */ 355 msleep(30); 356 357 return 0; 358 } 359 360 static u16 elants_i2c_parse_version(u8 *buf) 361 { 362 return get_unaligned_be32(buf) >> 4; 363 } 364 365 static int elants_i2c_query_hw_version(struct elants_data *ts) 366 { 367 struct i2c_client *client = ts->client; 368 int retry_cnt = MAX_RETRIES; 369 const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_FW_ID, 0x00, 0x01 }; 370 u8 resp[HEADER_SIZE]; 371 int error; 372 373 while (retry_cnt--) { 374 error = elants_i2c_execute_command(client, cmd, sizeof(cmd), 375 resp, sizeof(resp), 1, 376 "read fw id"); 377 if (error) 378 return error; 379 380 ts->hw_version = elants_i2c_parse_version(resp); 381 if (ts->hw_version != 0xffff) 382 return 0; 383 } 384 385 dev_err(&client->dev, "Invalid fw id: %#04x\n", ts->hw_version); 386 387 return -EINVAL; 388 } 389 390 static int elants_i2c_query_fw_version(struct elants_data *ts) 391 { 392 struct i2c_client *client = ts->client; 393 int retry_cnt = MAX_RETRIES; 394 const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_FW_VER, 0x00, 0x01 }; 395 u8 resp[HEADER_SIZE]; 396 int error; 397 398 while (retry_cnt--) { 399 error = elants_i2c_execute_command(client, cmd, sizeof(cmd), 400 resp, sizeof(resp), 1, 401 "read fw version"); 402 if (error) 403 return error; 404 405 ts->fw_version = elants_i2c_parse_version(resp); 406 if (ts->fw_version != 0x0000 && ts->fw_version != 0xffff) 407 return 0; 408 409 dev_dbg(&client->dev, "(read fw version) resp %*phC\n", 410 (int)sizeof(resp), resp); 411 } 412 413 dev_err(&client->dev, "Invalid fw ver: %#04x\n", ts->fw_version); 414 415 return -EINVAL; 416 } 417 418 static int elants_i2c_query_test_version(struct elants_data *ts) 419 { 420 struct i2c_client *client = ts->client; 421 int error; 422 u16 version; 423 const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_TEST_VER, 0x00, 0x01 }; 424 u8 resp[HEADER_SIZE]; 425 426 error = elants_i2c_execute_command(client, cmd, sizeof(cmd), 427 resp, sizeof(resp), MAX_RETRIES, 428 "read test version"); 429 if (error) { 430 dev_err(&client->dev, "Failed to read test version\n"); 431 return error; 432 } 433 434 version = elants_i2c_parse_version(resp); 435 ts->test_version = version >> 8; 436 ts->solution_version = version & 0xff; 437 438 return 0; 439 } 440 441 static int elants_i2c_query_bc_version(struct elants_data *ts) 442 { 443 struct i2c_client *client = ts->client; 444 const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_BC_VER, 0x00, 0x01 }; 445 u8 resp[HEADER_SIZE]; 446 u16 version; 447 int error; 448 449 error = elants_i2c_execute_command(client, cmd, sizeof(cmd), 450 resp, sizeof(resp), 1, 451 "read BC version"); 452 if (error) 453 return error; 454 455 version = elants_i2c_parse_version(resp); 456 ts->bc_version = version >> 8; 457 ts->iap_version = version & 0xff; 458 459 return 0; 460 } 461 462 static int elants_i2c_query_ts_info_ektf(struct elants_data *ts) 463 { 464 struct i2c_client *client = ts->client; 465 int error; 466 u8 resp[4]; 467 u16 phy_x, phy_y; 468 const u8 get_xres_cmd[] = { 469 CMD_HEADER_READ, E_ELAN_INFO_X_RES, 0x00, 0x00 470 }; 471 const u8 get_yres_cmd[] = { 472 CMD_HEADER_READ, E_ELAN_INFO_Y_RES, 0x00, 0x00 473 }; 474 475 /* Get X/Y size in mm */ 476 error = elants_i2c_execute_command(client, get_xres_cmd, 477 sizeof(get_xres_cmd), 478 resp, sizeof(resp), 1, 479 "get X size"); 480 if (error) 481 return error; 482 483 phy_x = resp[2] | ((resp[3] & 0xF0) << 4); 484 485 error = elants_i2c_execute_command(client, get_yres_cmd, 486 sizeof(get_yres_cmd), 487 resp, sizeof(resp), 1, 488 "get Y size"); 489 if (error) 490 return error; 491 492 phy_y = resp[2] | ((resp[3] & 0xF0) << 4); 493 494 dev_dbg(&client->dev, "phy_x=%d, phy_y=%d\n", phy_x, phy_y); 495 496 ts->phy_x = phy_x; 497 ts->phy_y = phy_y; 498 499 /* eKTF doesn't report max size, set it to default values */ 500 ts->x_max = 2240 - 1; 501 ts->y_max = 1408 - 1; 502 503 return 0; 504 } 505 506 static int elants_i2c_query_ts_info_ekth(struct elants_data *ts) 507 { 508 struct i2c_client *client = ts->client; 509 int error; 510 u8 resp[17]; 511 u16 phy_x, phy_y, rows, cols, osr; 512 const u8 get_resolution_cmd[] = { 513 CMD_HEADER_6B_READ, 0x00, 0x00, 0x00, 0x00, 0x00 514 }; 515 const u8 get_osr_cmd[] = { 516 CMD_HEADER_READ, E_INFO_OSR, 0x00, 0x01 517 }; 518 const u8 get_physical_scan_cmd[] = { 519 CMD_HEADER_READ, E_INFO_PHY_SCAN, 0x00, 0x01 520 }; 521 const u8 get_physical_drive_cmd[] = { 522 CMD_HEADER_READ, E_INFO_PHY_DRIVER, 0x00, 0x01 523 }; 524 525 /* Get trace number */ 526 error = elants_i2c_execute_command(client, 527 get_resolution_cmd, 528 sizeof(get_resolution_cmd), 529 resp, sizeof(resp), 1, 530 "get resolution"); 531 if (error) 532 return error; 533 534 rows = resp[2] + resp[6] + resp[10]; 535 cols = resp[3] + resp[7] + resp[11]; 536 537 /* Get report resolution value of ABS_MT_TOUCH_MAJOR */ 538 ts->major_res = resp[16]; 539 540 /* Process mm_to_pixel information */ 541 error = elants_i2c_execute_command(client, 542 get_osr_cmd, sizeof(get_osr_cmd), 543 resp, sizeof(resp), 1, "get osr"); 544 if (error) 545 return error; 546 547 osr = resp[3]; 548 549 error = elants_i2c_execute_command(client, 550 get_physical_scan_cmd, 551 sizeof(get_physical_scan_cmd), 552 resp, sizeof(resp), 1, 553 "get physical scan"); 554 if (error) 555 return error; 556 557 phy_x = get_unaligned_be16(&resp[2]); 558 559 error = elants_i2c_execute_command(client, 560 get_physical_drive_cmd, 561 sizeof(get_physical_drive_cmd), 562 resp, sizeof(resp), 1, 563 "get physical drive"); 564 if (error) 565 return error; 566 567 phy_y = get_unaligned_be16(&resp[2]); 568 569 dev_dbg(&client->dev, "phy_x=%d, phy_y=%d\n", phy_x, phy_y); 570 571 if (rows == 0 || cols == 0 || osr == 0) { 572 dev_warn(&client->dev, 573 "invalid trace number data: %d, %d, %d\n", 574 rows, cols, osr); 575 } else { 576 /* translate trace number to TS resolution */ 577 ts->x_max = ELAN_TS_RESOLUTION(rows, osr); 578 ts->x_res = DIV_ROUND_CLOSEST(ts->x_max, phy_x); 579 ts->y_max = ELAN_TS_RESOLUTION(cols, osr); 580 ts->y_res = DIV_ROUND_CLOSEST(ts->y_max, phy_y); 581 ts->phy_x = phy_x; 582 ts->phy_y = phy_y; 583 } 584 585 return 0; 586 } 587 588 static int elants_i2c_fastboot(struct i2c_client *client) 589 { 590 const u8 boot_cmd[] = { 0x4D, 0x61, 0x69, 0x6E }; 591 int error; 592 593 error = elants_i2c_send(client, boot_cmd, sizeof(boot_cmd)); 594 if (error) { 595 dev_err(&client->dev, "boot failed: %d\n", error); 596 return error; 597 } 598 599 dev_dbg(&client->dev, "boot success -- 0x%x\n", client->addr); 600 return 0; 601 } 602 603 static int elants_i2c_initialize(struct elants_data *ts) 604 { 605 struct i2c_client *client = ts->client; 606 int error, error2, retry_cnt; 607 const u8 hello_packet[] = { 0x55, 0x55, 0x55, 0x55 }; 608 const u8 recov_packet[] = { 0x55, 0x55, 0x80, 0x80 }; 609 u8 buf[HEADER_SIZE]; 610 611 for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) { 612 error = elants_i2c_sw_reset(client); 613 if (error) { 614 /* Continue initializing if it's the last try */ 615 if (retry_cnt < MAX_RETRIES - 1) 616 continue; 617 } 618 619 error = elants_i2c_fastboot(client); 620 if (error) { 621 /* Continue initializing if it's the last try */ 622 if (retry_cnt < MAX_RETRIES - 1) 623 continue; 624 } 625 626 /* Wait for Hello packet */ 627 msleep(BOOT_TIME_DELAY_MS); 628 629 error = elants_i2c_read(client, buf, sizeof(buf)); 630 if (error) { 631 dev_err(&client->dev, 632 "failed to read 'hello' packet: %d\n", error); 633 } else if (!memcmp(buf, hello_packet, sizeof(hello_packet))) { 634 ts->iap_mode = ELAN_IAP_OPERATIONAL; 635 break; 636 } else if (!memcmp(buf, recov_packet, sizeof(recov_packet))) { 637 /* 638 * Setting error code will mark device 639 * in recovery mode below. 640 */ 641 error = -EIO; 642 break; 643 } else { 644 error = -EINVAL; 645 dev_err(&client->dev, 646 "invalid 'hello' packet: %*ph\n", 647 (int)sizeof(buf), buf); 648 } 649 } 650 651 /* hw version is available even if device in recovery state */ 652 error2 = elants_i2c_query_hw_version(ts); 653 if (!error2) 654 error2 = elants_i2c_query_bc_version(ts); 655 if (!error) 656 error = error2; 657 658 if (!error) 659 error = elants_i2c_query_fw_version(ts); 660 if (!error) 661 error = elants_i2c_query_test_version(ts); 662 663 switch (ts->chip_id) { 664 case EKTH3500: 665 if (!error) 666 error = elants_i2c_query_ts_info_ekth(ts); 667 break; 668 case EKTF3624: 669 if (!error) 670 error = elants_i2c_query_ts_info_ektf(ts); 671 break; 672 default: 673 BUG(); 674 } 675 676 if (error) 677 ts->iap_mode = ELAN_IAP_RECOVERY; 678 679 return 0; 680 } 681 682 /* 683 * Firmware update interface. 684 */ 685 686 static int elants_i2c_fw_write_page(struct i2c_client *client, 687 const void *page) 688 { 689 const u8 ack_ok[] = { 0xaa, 0xaa }; 690 u8 buf[2]; 691 int retry; 692 int error; 693 694 for (retry = 0; retry < MAX_FW_UPDATE_RETRIES; retry++) { 695 error = elants_i2c_send(client, page, ELAN_FW_PAGESIZE); 696 if (error) { 697 dev_err(&client->dev, 698 "IAP Write Page failed: %d\n", error); 699 continue; 700 } 701 702 error = elants_i2c_read(client, buf, 2); 703 if (error) { 704 dev_err(&client->dev, 705 "IAP Ack read failed: %d\n", error); 706 return error; 707 } 708 709 if (!memcmp(buf, ack_ok, sizeof(ack_ok))) 710 return 0; 711 712 error = -EIO; 713 dev_err(&client->dev, 714 "IAP Get Ack Error [%02x:%02x]\n", 715 buf[0], buf[1]); 716 } 717 718 return error; 719 } 720 721 static int elants_i2c_validate_remark_id(struct elants_data *ts, 722 const struct firmware *fw) 723 { 724 struct i2c_client *client = ts->client; 725 int error; 726 const u8 cmd[] = { CMD_HEADER_ROM_READ, 0x80, 0x1F, 0x00, 0x00, 0x21 }; 727 u8 resp[6] = { 0 }; 728 u16 ts_remark_id = 0; 729 u16 fw_remark_id = 0; 730 731 /* Compare TS Remark ID and FW Remark ID */ 732 error = elants_i2c_execute_command(client, cmd, sizeof(cmd), 733 resp, sizeof(resp), 734 1, "read Remark ID"); 735 if (error) 736 return error; 737 738 ts_remark_id = get_unaligned_be16(&resp[3]); 739 740 fw_remark_id = get_unaligned_le16(&fw->data[fw->size - 4]); 741 742 if (fw_remark_id != ts_remark_id) { 743 dev_err(&client->dev, 744 "Remark ID Mismatched: ts_remark_id=0x%04x, fw_remark_id=0x%04x.\n", 745 ts_remark_id, fw_remark_id); 746 return -EINVAL; 747 } 748 749 return 0; 750 } 751 752 static bool elants_i2c_should_check_remark_id(struct elants_data *ts) 753 { 754 struct i2c_client *client = ts->client; 755 const u8 bootcode_version = ts->iap_version; 756 bool check; 757 758 /* I2C eKTH3900 and eKTH5312 are NOT support Remark ID */ 759 if ((bootcode_version == BC_VER_H_BYTE_FOR_EKTH3900x1_I2C) || 760 (bootcode_version == BC_VER_H_BYTE_FOR_EKTH3900x2_I2C) || 761 (bootcode_version == BC_VER_H_BYTE_FOR_EKTH3900x3_I2C) || 762 (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x1_I2C) || 763 (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x2_I2C) || 764 (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C) || 765 (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C) || 766 (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x1_I2C_USB) || 767 (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x2_I2C_USB) || 768 (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C_USB) || 769 (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C_USB)) { 770 dev_dbg(&client->dev, 771 "eKTH3900/eKTH5312(0x%02x) are not support remark id\n", 772 bootcode_version); 773 check = false; 774 } else if (bootcode_version >= 0x60) { 775 check = true; 776 } else { 777 check = false; 778 } 779 780 return check; 781 } 782 783 static int elants_i2c_do_update_firmware(struct i2c_client *client, 784 const struct firmware *fw, 785 bool force) 786 { 787 struct elants_data *ts = i2c_get_clientdata(client); 788 const u8 enter_iap[] = { 0x45, 0x49, 0x41, 0x50 }; 789 const u8 enter_iap2[] = { 0x54, 0x00, 0x12, 0x34 }; 790 const u8 iap_ack[] = { 0x55, 0xaa, 0x33, 0xcc }; 791 const u8 close_idle[] = { 0x54, 0x2c, 0x01, 0x01 }; 792 u8 buf[HEADER_SIZE]; 793 u16 send_id; 794 int page, n_fw_pages; 795 int error; 796 bool check_remark_id = elants_i2c_should_check_remark_id(ts); 797 798 /* Recovery mode detection! */ 799 if (force) { 800 dev_dbg(&client->dev, "Recovery mode procedure\n"); 801 802 if (check_remark_id) { 803 error = elants_i2c_validate_remark_id(ts, fw); 804 if (error) 805 return error; 806 } 807 808 error = elants_i2c_send(client, enter_iap2, sizeof(enter_iap2)); 809 if (error) { 810 dev_err(&client->dev, "failed to enter IAP mode: %d\n", 811 error); 812 return error; 813 } 814 } else { 815 /* Start IAP Procedure */ 816 dev_dbg(&client->dev, "Normal IAP procedure\n"); 817 818 /* Close idle mode */ 819 error = elants_i2c_send(client, close_idle, sizeof(close_idle)); 820 if (error) 821 dev_err(&client->dev, "Failed close idle: %d\n", error); 822 msleep(60); 823 824 elants_i2c_sw_reset(client); 825 msleep(20); 826 827 if (check_remark_id) { 828 error = elants_i2c_validate_remark_id(ts, fw); 829 if (error) 830 return error; 831 } 832 833 error = elants_i2c_send(client, enter_iap, sizeof(enter_iap)); 834 if (error) { 835 dev_err(&client->dev, "failed to enter IAP mode: %d\n", 836 error); 837 return error; 838 } 839 } 840 841 msleep(20); 842 843 /* check IAP state */ 844 error = elants_i2c_read(client, buf, 4); 845 if (error) { 846 dev_err(&client->dev, 847 "failed to read IAP acknowledgement: %d\n", 848 error); 849 return error; 850 } 851 852 if (memcmp(buf, iap_ack, sizeof(iap_ack))) { 853 dev_err(&client->dev, 854 "failed to enter IAP: %*ph (expected %*ph)\n", 855 (int)sizeof(buf), buf, (int)sizeof(iap_ack), iap_ack); 856 return -EIO; 857 } 858 859 dev_info(&client->dev, "successfully entered IAP mode"); 860 861 send_id = client->addr; 862 error = elants_i2c_send(client, &send_id, 1); 863 if (error) { 864 dev_err(&client->dev, "sending dummy byte failed: %d\n", 865 error); 866 return error; 867 } 868 869 /* Clear the last page of Master */ 870 error = elants_i2c_send(client, fw->data, ELAN_FW_PAGESIZE); 871 if (error) { 872 dev_err(&client->dev, "clearing of the last page failed: %d\n", 873 error); 874 return error; 875 } 876 877 error = elants_i2c_read(client, buf, 2); 878 if (error) { 879 dev_err(&client->dev, 880 "failed to read ACK for clearing the last page: %d\n", 881 error); 882 return error; 883 } 884 885 n_fw_pages = fw->size / ELAN_FW_PAGESIZE; 886 dev_dbg(&client->dev, "IAP Pages = %d\n", n_fw_pages); 887 888 for (page = 0; page < n_fw_pages; page++) { 889 error = elants_i2c_fw_write_page(client, 890 fw->data + page * ELAN_FW_PAGESIZE); 891 if (error) { 892 dev_err(&client->dev, 893 "failed to write FW page %d: %d\n", 894 page, error); 895 return error; 896 } 897 } 898 899 /* Old iap needs to wait 200ms for WDT and rest is for hello packets */ 900 msleep(300); 901 902 dev_info(&client->dev, "firmware update completed\n"); 903 return 0; 904 } 905 906 static int elants_i2c_fw_update(struct elants_data *ts) 907 { 908 struct i2c_client *client = ts->client; 909 const struct firmware *fw; 910 char *fw_name; 911 int error; 912 913 fw_name = kasprintf(GFP_KERNEL, "elants_i2c_%04x.bin", ts->hw_version); 914 if (!fw_name) 915 return -ENOMEM; 916 917 dev_info(&client->dev, "requesting fw name = %s\n", fw_name); 918 error = request_firmware(&fw, fw_name, &client->dev); 919 kfree(fw_name); 920 if (error) { 921 dev_err(&client->dev, "failed to request firmware: %d\n", 922 error); 923 return error; 924 } 925 926 if (fw->size % ELAN_FW_PAGESIZE) { 927 dev_err(&client->dev, "invalid firmware length: %zu\n", 928 fw->size); 929 error = -EINVAL; 930 goto out; 931 } 932 933 disable_irq(client->irq); 934 935 error = elants_i2c_do_update_firmware(client, fw, 936 ts->iap_mode == ELAN_IAP_RECOVERY); 937 if (error) { 938 dev_err(&client->dev, "firmware update failed: %d\n", error); 939 ts->iap_mode = ELAN_IAP_RECOVERY; 940 goto out_enable_irq; 941 } 942 943 error = elants_i2c_initialize(ts); 944 if (error) { 945 dev_err(&client->dev, 946 "failed to initialize device after firmware update: %d\n", 947 error); 948 ts->iap_mode = ELAN_IAP_RECOVERY; 949 goto out_enable_irq; 950 } 951 952 ts->iap_mode = ELAN_IAP_OPERATIONAL; 953 954 out_enable_irq: 955 ts->state = ELAN_STATE_NORMAL; 956 enable_irq(client->irq); 957 msleep(100); 958 959 if (!error) 960 elants_i2c_calibrate(ts); 961 out: 962 release_firmware(fw); 963 return error; 964 } 965 966 /* 967 * Event reporting. 968 */ 969 970 static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf, 971 size_t packet_size) 972 { 973 struct input_dev *input = ts->input; 974 unsigned int n_fingers; 975 unsigned int tool_type; 976 u16 finger_state; 977 int i; 978 979 n_fingers = buf[FW_POS_STATE + 1] & 0x0f; 980 finger_state = ((buf[FW_POS_STATE + 1] & 0x30) << 4) | 981 buf[FW_POS_STATE]; 982 983 dev_dbg(&ts->client->dev, 984 "n_fingers: %u, state: %04x\n", n_fingers, finger_state); 985 986 /* Note: all fingers have the same tool type */ 987 tool_type = buf[FW_POS_TOOL_TYPE] & BIT(0) ? 988 MT_TOOL_FINGER : MT_TOOL_PALM; 989 990 for (i = 0; i < MAX_CONTACT_NUM && n_fingers; i++) { 991 if (finger_state & 1) { 992 unsigned int x, y, p, w; 993 u8 *pos; 994 995 pos = &buf[FW_POS_XY + i * 3]; 996 x = (((u16)pos[0] & 0xf0) << 4) | pos[1]; 997 y = (((u16)pos[0] & 0x0f) << 8) | pos[2]; 998 999 /* 1000 * eKTF3624 may have use "old" touch-report format, 1001 * depending on a device and TS firmware version. 1002 * For example, ASUS Transformer devices use the "old" 1003 * format, while ASUS Nexus 7 uses the "new" formant. 1004 */ 1005 if (packet_size == PACKET_SIZE_OLD && 1006 ts->chip_id == EKTF3624) { 1007 w = buf[FW_POS_WIDTH + i / 2]; 1008 w >>= 4 * (~i & 1); 1009 w |= w << 4; 1010 w |= !w; 1011 p = w; 1012 } else { 1013 p = buf[FW_POS_PRESSURE + i]; 1014 w = buf[FW_POS_WIDTH + i]; 1015 } 1016 1017 dev_dbg(&ts->client->dev, "i=%d x=%d y=%d p=%d w=%d\n", 1018 i, x, y, p, w); 1019 1020 input_mt_slot(input, i); 1021 input_mt_report_slot_state(input, tool_type, true); 1022 touchscreen_report_pos(input, &ts->prop, x, y, true); 1023 input_event(input, EV_ABS, ABS_MT_PRESSURE, p); 1024 input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, w); 1025 1026 n_fingers--; 1027 } 1028 1029 finger_state >>= 1; 1030 } 1031 1032 input_mt_sync_frame(input); 1033 input_sync(input); 1034 } 1035 1036 static u8 elants_i2c_calculate_checksum(u8 *buf) 1037 { 1038 u8 checksum = 0; 1039 u8 i; 1040 1041 for (i = 0; i < FW_POS_CHECKSUM; i++) 1042 checksum += buf[i]; 1043 1044 return checksum; 1045 } 1046 1047 static void elants_i2c_event(struct elants_data *ts, u8 *buf, 1048 size_t packet_size) 1049 { 1050 u8 checksum = elants_i2c_calculate_checksum(buf); 1051 1052 if (unlikely(buf[FW_POS_CHECKSUM] != checksum)) 1053 dev_warn(&ts->client->dev, 1054 "%s: invalid checksum for packet %02x: %02x vs. %02x\n", 1055 __func__, buf[FW_POS_HEADER], 1056 checksum, buf[FW_POS_CHECKSUM]); 1057 else if (unlikely(buf[FW_POS_HEADER] != HEADER_REPORT_10_FINGER)) 1058 dev_warn(&ts->client->dev, 1059 "%s: unknown packet type: %02x\n", 1060 __func__, buf[FW_POS_HEADER]); 1061 else 1062 elants_i2c_mt_event(ts, buf, packet_size); 1063 } 1064 1065 static irqreturn_t elants_i2c_irq(int irq, void *_dev) 1066 { 1067 const u8 wait_packet[] = { 0x64, 0x64, 0x64, 0x64 }; 1068 struct elants_data *ts = _dev; 1069 struct i2c_client *client = ts->client; 1070 int report_count, report_len; 1071 int i; 1072 int len; 1073 1074 len = i2c_master_recv_dmasafe(client, ts->buf, sizeof(ts->buf)); 1075 if (len < 0) { 1076 dev_err(&client->dev, "%s: failed to read data: %d\n", 1077 __func__, len); 1078 goto out; 1079 } 1080 1081 dev_dbg(&client->dev, "%s: packet %*ph\n", 1082 __func__, HEADER_SIZE, ts->buf); 1083 1084 switch (ts->state) { 1085 case ELAN_WAIT_RECALIBRATION: 1086 if (ts->buf[FW_HDR_TYPE] == CMD_HEADER_REK) { 1087 memcpy(ts->cmd_resp, ts->buf, sizeof(ts->cmd_resp)); 1088 complete(&ts->cmd_done); 1089 ts->state = ELAN_STATE_NORMAL; 1090 } 1091 break; 1092 1093 case ELAN_WAIT_QUEUE_HEADER: 1094 if (ts->buf[FW_HDR_TYPE] != QUEUE_HEADER_NORMAL) 1095 break; 1096 1097 ts->state = ELAN_STATE_NORMAL; 1098 fallthrough; 1099 1100 case ELAN_STATE_NORMAL: 1101 1102 switch (ts->buf[FW_HDR_TYPE]) { 1103 case CMD_HEADER_HELLO: 1104 case CMD_HEADER_RESP: 1105 break; 1106 1107 case QUEUE_HEADER_WAIT: 1108 if (memcmp(ts->buf, wait_packet, sizeof(wait_packet))) { 1109 dev_err(&client->dev, 1110 "invalid wait packet %*ph\n", 1111 HEADER_SIZE, ts->buf); 1112 } else { 1113 ts->state = ELAN_WAIT_QUEUE_HEADER; 1114 udelay(30); 1115 } 1116 break; 1117 1118 case QUEUE_HEADER_SINGLE: 1119 elants_i2c_event(ts, &ts->buf[HEADER_SIZE], 1120 ts->buf[FW_HDR_LENGTH]); 1121 break; 1122 1123 case QUEUE_HEADER_NORMAL2: /* CMD_HEADER_REK */ 1124 /* 1125 * Depending on firmware version, eKTF3624 touchscreens 1126 * may utilize one of these opcodes for the touch events: 1127 * 0x63 (NORMAL) and 0x66 (NORMAL2). The 0x63 is used by 1128 * older firmware version and differs from 0x66 such that 1129 * touch pressure value needs to be adjusted. The 0x66 1130 * opcode of newer firmware is equal to 0x63 of eKTH3500. 1131 */ 1132 if (ts->chip_id != EKTF3624) 1133 break; 1134 1135 fallthrough; 1136 1137 case QUEUE_HEADER_NORMAL: 1138 report_count = ts->buf[FW_HDR_COUNT]; 1139 if (report_count == 0 || report_count > 3) { 1140 dev_err(&client->dev, 1141 "bad report count: %*ph\n", 1142 HEADER_SIZE, ts->buf); 1143 break; 1144 } 1145 1146 report_len = ts->buf[FW_HDR_LENGTH] / report_count; 1147 1148 if (report_len == PACKET_SIZE_OLD && 1149 ts->chip_id == EKTF3624) { 1150 dev_dbg_once(&client->dev, 1151 "using old report format\n"); 1152 } else if (report_len != PACKET_SIZE) { 1153 dev_err(&client->dev, 1154 "mismatching report length: %*ph\n", 1155 HEADER_SIZE, ts->buf); 1156 break; 1157 } 1158 1159 for (i = 0; i < report_count; i++) { 1160 u8 *buf = ts->buf + HEADER_SIZE + 1161 i * report_len; 1162 elants_i2c_event(ts, buf, report_len); 1163 } 1164 break; 1165 1166 default: 1167 dev_err(&client->dev, "unknown packet %*ph\n", 1168 HEADER_SIZE, ts->buf); 1169 break; 1170 } 1171 break; 1172 } 1173 1174 out: 1175 return IRQ_HANDLED; 1176 } 1177 1178 /* 1179 * sysfs interface 1180 */ 1181 static ssize_t calibrate_store(struct device *dev, 1182 struct device_attribute *attr, 1183 const char *buf, size_t count) 1184 { 1185 struct i2c_client *client = to_i2c_client(dev); 1186 struct elants_data *ts = i2c_get_clientdata(client); 1187 int error; 1188 1189 error = mutex_lock_interruptible(&ts->sysfs_mutex); 1190 if (error) 1191 return error; 1192 1193 error = elants_i2c_calibrate(ts); 1194 1195 mutex_unlock(&ts->sysfs_mutex); 1196 return error ?: count; 1197 } 1198 1199 static ssize_t write_update_fw(struct device *dev, 1200 struct device_attribute *attr, 1201 const char *buf, size_t count) 1202 { 1203 struct i2c_client *client = to_i2c_client(dev); 1204 struct elants_data *ts = i2c_get_clientdata(client); 1205 int error; 1206 1207 error = mutex_lock_interruptible(&ts->sysfs_mutex); 1208 if (error) 1209 return error; 1210 1211 error = elants_i2c_fw_update(ts); 1212 dev_dbg(dev, "firmware update result: %d\n", error); 1213 1214 mutex_unlock(&ts->sysfs_mutex); 1215 return error ?: count; 1216 } 1217 1218 static ssize_t show_iap_mode(struct device *dev, 1219 struct device_attribute *attr, char *buf) 1220 { 1221 struct i2c_client *client = to_i2c_client(dev); 1222 struct elants_data *ts = i2c_get_clientdata(client); 1223 1224 return sprintf(buf, "%s\n", 1225 ts->iap_mode == ELAN_IAP_OPERATIONAL ? 1226 "Normal" : "Recovery"); 1227 } 1228 1229 static ssize_t show_calibration_count(struct device *dev, 1230 struct device_attribute *attr, char *buf) 1231 { 1232 struct i2c_client *client = to_i2c_client(dev); 1233 const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_REK, 0x00, 0x01 }; 1234 u8 resp[HEADER_SIZE]; 1235 u16 rek_count; 1236 int error; 1237 1238 error = elants_i2c_execute_command(client, cmd, sizeof(cmd), 1239 resp, sizeof(resp), 1, 1240 "read ReK status"); 1241 if (error) 1242 return sprintf(buf, "%d\n", error); 1243 1244 rek_count = get_unaligned_be16(&resp[2]); 1245 return sprintf(buf, "0x%04x\n", rek_count); 1246 } 1247 1248 static DEVICE_ATTR_WO(calibrate); 1249 static DEVICE_ATTR(iap_mode, S_IRUGO, show_iap_mode, NULL); 1250 static DEVICE_ATTR(calibration_count, S_IRUGO, show_calibration_count, NULL); 1251 static DEVICE_ATTR(update_fw, S_IWUSR, NULL, write_update_fw); 1252 1253 struct elants_version_attribute { 1254 struct device_attribute dattr; 1255 size_t field_offset; 1256 size_t field_size; 1257 }; 1258 1259 #define __ELANTS_FIELD_SIZE(_field) \ 1260 sizeof(((struct elants_data *)NULL)->_field) 1261 #define __ELANTS_VERIFY_SIZE(_field) \ 1262 (BUILD_BUG_ON_ZERO(__ELANTS_FIELD_SIZE(_field) > 2) + \ 1263 __ELANTS_FIELD_SIZE(_field)) 1264 #define ELANTS_VERSION_ATTR(_field) \ 1265 struct elants_version_attribute elants_ver_attr_##_field = { \ 1266 .dattr = __ATTR(_field, S_IRUGO, \ 1267 elants_version_attribute_show, NULL), \ 1268 .field_offset = offsetof(struct elants_data, _field), \ 1269 .field_size = __ELANTS_VERIFY_SIZE(_field), \ 1270 } 1271 1272 static ssize_t elants_version_attribute_show(struct device *dev, 1273 struct device_attribute *dattr, 1274 char *buf) 1275 { 1276 struct i2c_client *client = to_i2c_client(dev); 1277 struct elants_data *ts = i2c_get_clientdata(client); 1278 struct elants_version_attribute *attr = 1279 container_of(dattr, struct elants_version_attribute, dattr); 1280 u8 *field = (u8 *)((char *)ts + attr->field_offset); 1281 unsigned int fmt_size; 1282 unsigned int val; 1283 1284 if (attr->field_size == 1) { 1285 val = *field; 1286 fmt_size = 2; /* 2 HEX digits */ 1287 } else { 1288 val = *(u16 *)field; 1289 fmt_size = 4; /* 4 HEX digits */ 1290 } 1291 1292 return sprintf(buf, "%0*x\n", fmt_size, val); 1293 } 1294 1295 static ELANTS_VERSION_ATTR(fw_version); 1296 static ELANTS_VERSION_ATTR(hw_version); 1297 static ELANTS_VERSION_ATTR(test_version); 1298 static ELANTS_VERSION_ATTR(solution_version); 1299 static ELANTS_VERSION_ATTR(bc_version); 1300 static ELANTS_VERSION_ATTR(iap_version); 1301 1302 static struct attribute *elants_attributes[] = { 1303 &dev_attr_calibrate.attr, 1304 &dev_attr_update_fw.attr, 1305 &dev_attr_iap_mode.attr, 1306 &dev_attr_calibration_count.attr, 1307 1308 &elants_ver_attr_fw_version.dattr.attr, 1309 &elants_ver_attr_hw_version.dattr.attr, 1310 &elants_ver_attr_test_version.dattr.attr, 1311 &elants_ver_attr_solution_version.dattr.attr, 1312 &elants_ver_attr_bc_version.dattr.attr, 1313 &elants_ver_attr_iap_version.dattr.attr, 1314 NULL 1315 }; 1316 1317 static const struct attribute_group elants_attribute_group = { 1318 .attrs = elants_attributes, 1319 }; 1320 1321 static int elants_i2c_power_on(struct elants_data *ts) 1322 { 1323 int error; 1324 1325 /* 1326 * If we do not have reset gpio assume platform firmware 1327 * controls regulators and does power them on for us. 1328 */ 1329 if (IS_ERR_OR_NULL(ts->reset_gpio)) 1330 return 0; 1331 1332 gpiod_set_value_cansleep(ts->reset_gpio, 1); 1333 1334 error = regulator_enable(ts->vcc33); 1335 if (error) { 1336 dev_err(&ts->client->dev, 1337 "failed to enable vcc33 regulator: %d\n", 1338 error); 1339 goto release_reset_gpio; 1340 } 1341 1342 error = regulator_enable(ts->vccio); 1343 if (error) { 1344 dev_err(&ts->client->dev, 1345 "failed to enable vccio regulator: %d\n", 1346 error); 1347 regulator_disable(ts->vcc33); 1348 goto release_reset_gpio; 1349 } 1350 1351 /* 1352 * We need to wait a bit after powering on controller before 1353 * we are allowed to release reset GPIO. 1354 */ 1355 udelay(ELAN_POWERON_DELAY_USEC); 1356 1357 release_reset_gpio: 1358 gpiod_set_value_cansleep(ts->reset_gpio, 0); 1359 if (error) 1360 return error; 1361 1362 msleep(ELAN_RESET_DELAY_MSEC); 1363 1364 return 0; 1365 } 1366 1367 static void elants_i2c_power_off(void *_data) 1368 { 1369 struct elants_data *ts = _data; 1370 1371 if (!IS_ERR_OR_NULL(ts->reset_gpio)) { 1372 /* 1373 * Activate reset gpio to prevent leakage through the 1374 * pin once we shut off power to the controller. 1375 */ 1376 gpiod_set_value_cansleep(ts->reset_gpio, 1); 1377 regulator_disable(ts->vccio); 1378 regulator_disable(ts->vcc33); 1379 } 1380 } 1381 1382 #ifdef CONFIG_ACPI 1383 static const struct acpi_device_id i2c_hid_ids[] = { 1384 {"ACPI0C50", 0 }, 1385 {"PNP0C50", 0 }, 1386 { }, 1387 }; 1388 1389 static const guid_t i2c_hid_guid = 1390 GUID_INIT(0x3CDFF6F7, 0x4267, 0x4555, 1391 0xAD, 0x05, 0xB3, 0x0A, 0x3D, 0x89, 0x38, 0xDE); 1392 1393 static bool elants_acpi_is_hid_device(struct device *dev) 1394 { 1395 acpi_handle handle = ACPI_HANDLE(dev); 1396 union acpi_object *obj; 1397 1398 if (acpi_match_device_ids(ACPI_COMPANION(dev), i2c_hid_ids)) 1399 return false; 1400 1401 obj = acpi_evaluate_dsm_typed(handle, &i2c_hid_guid, 1, 1, NULL, ACPI_TYPE_INTEGER); 1402 if (obj) { 1403 ACPI_FREE(obj); 1404 return true; 1405 } 1406 1407 return false; 1408 } 1409 #else 1410 static bool elants_acpi_is_hid_device(struct device *dev) 1411 { 1412 return false; 1413 } 1414 #endif 1415 1416 static int elants_i2c_probe(struct i2c_client *client) 1417 { 1418 union i2c_smbus_data dummy; 1419 struct elants_data *ts; 1420 unsigned long irqflags; 1421 int error; 1422 1423 /* Don't bind to i2c-hid compatible devices, these are handled by the i2c-hid drv. */ 1424 if (elants_acpi_is_hid_device(&client->dev)) { 1425 dev_warn(&client->dev, "This device appears to be an I2C-HID device, not binding\n"); 1426 return -ENODEV; 1427 } 1428 1429 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { 1430 dev_err(&client->dev, "I2C check functionality error\n"); 1431 return -ENXIO; 1432 } 1433 1434 ts = devm_kzalloc(&client->dev, sizeof(struct elants_data), GFP_KERNEL); 1435 if (!ts) 1436 return -ENOMEM; 1437 1438 mutex_init(&ts->sysfs_mutex); 1439 init_completion(&ts->cmd_done); 1440 1441 ts->client = client; 1442 ts->chip_id = (enum elants_chip_id)(uintptr_t)device_get_match_data(&client->dev); 1443 i2c_set_clientdata(client, ts); 1444 1445 ts->vcc33 = devm_regulator_get(&client->dev, "vcc33"); 1446 if (IS_ERR(ts->vcc33)) { 1447 error = PTR_ERR(ts->vcc33); 1448 if (error != -EPROBE_DEFER) 1449 dev_err(&client->dev, 1450 "Failed to get 'vcc33' regulator: %d\n", 1451 error); 1452 return error; 1453 } 1454 1455 ts->vccio = devm_regulator_get(&client->dev, "vccio"); 1456 if (IS_ERR(ts->vccio)) { 1457 error = PTR_ERR(ts->vccio); 1458 if (error != -EPROBE_DEFER) 1459 dev_err(&client->dev, 1460 "Failed to get 'vccio' regulator: %d\n", 1461 error); 1462 return error; 1463 } 1464 1465 ts->reset_gpio = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW); 1466 if (IS_ERR(ts->reset_gpio)) { 1467 error = PTR_ERR(ts->reset_gpio); 1468 1469 if (error == -EPROBE_DEFER) 1470 return error; 1471 1472 if (error != -ENOENT && error != -ENOSYS) { 1473 dev_err(&client->dev, 1474 "failed to get reset gpio: %d\n", 1475 error); 1476 return error; 1477 } 1478 1479 ts->keep_power_in_suspend = true; 1480 } 1481 1482 error = elants_i2c_power_on(ts); 1483 if (error) 1484 return error; 1485 1486 error = devm_add_action_or_reset(&client->dev, 1487 elants_i2c_power_off, ts); 1488 if (error) { 1489 dev_err(&client->dev, 1490 "failed to install power off action: %d\n", error); 1491 return error; 1492 } 1493 1494 /* Make sure there is something at this address */ 1495 if (i2c_smbus_xfer(client->adapter, client->addr, 0, 1496 I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &dummy) < 0) { 1497 dev_err(&client->dev, "nothing at this address\n"); 1498 return -ENXIO; 1499 } 1500 1501 error = elants_i2c_initialize(ts); 1502 if (error) { 1503 dev_err(&client->dev, "failed to initialize: %d\n", error); 1504 return error; 1505 } 1506 1507 ts->input = devm_input_allocate_device(&client->dev); 1508 if (!ts->input) { 1509 dev_err(&client->dev, "Failed to allocate input device\n"); 1510 return -ENOMEM; 1511 } 1512 1513 ts->input->name = "Elan Touchscreen"; 1514 ts->input->id.bustype = BUS_I2C; 1515 1516 /* Multitouch input params setup */ 1517 1518 input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, ts->x_max, 0, 0); 1519 input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, ts->y_max, 0, 0); 1520 input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); 1521 input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0); 1522 input_set_abs_params(ts->input, ABS_MT_TOOL_TYPE, 1523 0, MT_TOOL_PALM, 0, 0); 1524 1525 touchscreen_parse_properties(ts->input, true, &ts->prop); 1526 1527 if (ts->chip_id == EKTF3624 && ts->phy_x && ts->phy_y) { 1528 /* calculate resolution from size */ 1529 ts->x_res = DIV_ROUND_CLOSEST(ts->prop.max_x, ts->phy_x); 1530 ts->y_res = DIV_ROUND_CLOSEST(ts->prop.max_y, ts->phy_y); 1531 } 1532 1533 input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res); 1534 input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res); 1535 input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, ts->major_res); 1536 1537 error = input_mt_init_slots(ts->input, MAX_CONTACT_NUM, 1538 INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); 1539 if (error) { 1540 dev_err(&client->dev, 1541 "failed to initialize MT slots: %d\n", error); 1542 return error; 1543 } 1544 1545 error = input_register_device(ts->input); 1546 if (error) { 1547 dev_err(&client->dev, 1548 "unable to register input device: %d\n", error); 1549 return error; 1550 } 1551 1552 /* 1553 * Platform code (ACPI, DTS) should normally set up interrupt 1554 * for us, but in case it did not let's fall back to using falling 1555 * edge to be compatible with older Chromebooks. 1556 */ 1557 irqflags = irq_get_trigger_type(client->irq); 1558 if (!irqflags) 1559 irqflags = IRQF_TRIGGER_FALLING; 1560 1561 error = devm_request_threaded_irq(&client->dev, client->irq, 1562 NULL, elants_i2c_irq, 1563 irqflags | IRQF_ONESHOT, 1564 client->name, ts); 1565 if (error) { 1566 dev_err(&client->dev, "Failed to register interrupt\n"); 1567 return error; 1568 } 1569 1570 /* 1571 * Systems using device tree should set up wakeup via DTS, 1572 * the rest will configure device as wakeup source by default. 1573 */ 1574 if (!client->dev.of_node) 1575 device_init_wakeup(&client->dev, true); 1576 1577 error = devm_device_add_group(&client->dev, &elants_attribute_group); 1578 if (error) { 1579 dev_err(&client->dev, "failed to create sysfs attributes: %d\n", 1580 error); 1581 return error; 1582 } 1583 1584 return 0; 1585 } 1586 1587 static int __maybe_unused elants_i2c_suspend(struct device *dev) 1588 { 1589 struct i2c_client *client = to_i2c_client(dev); 1590 struct elants_data *ts = i2c_get_clientdata(client); 1591 const u8 set_sleep_cmd[] = { 1592 CMD_HEADER_WRITE, E_POWER_STATE_SLEEP, 0x00, 0x01 1593 }; 1594 int retry_cnt; 1595 int error; 1596 1597 /* Command not support in IAP recovery mode */ 1598 if (ts->iap_mode != ELAN_IAP_OPERATIONAL) 1599 return -EBUSY; 1600 1601 disable_irq(client->irq); 1602 1603 if (device_may_wakeup(dev)) { 1604 /* 1605 * The device will automatically enter idle mode 1606 * that has reduced power consumption. 1607 */ 1608 ts->wake_irq_enabled = (enable_irq_wake(client->irq) == 0); 1609 } else if (ts->keep_power_in_suspend) { 1610 for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) { 1611 error = elants_i2c_send(client, set_sleep_cmd, 1612 sizeof(set_sleep_cmd)); 1613 if (!error) 1614 break; 1615 1616 dev_err(&client->dev, 1617 "suspend command failed: %d\n", error); 1618 } 1619 } else { 1620 elants_i2c_power_off(ts); 1621 } 1622 1623 return 0; 1624 } 1625 1626 static int __maybe_unused elants_i2c_resume(struct device *dev) 1627 { 1628 struct i2c_client *client = to_i2c_client(dev); 1629 struct elants_data *ts = i2c_get_clientdata(client); 1630 const u8 set_active_cmd[] = { 1631 CMD_HEADER_WRITE, E_POWER_STATE_RESUME, 0x00, 0x01 1632 }; 1633 int retry_cnt; 1634 int error; 1635 1636 if (device_may_wakeup(dev)) { 1637 if (ts->wake_irq_enabled) 1638 disable_irq_wake(client->irq); 1639 elants_i2c_sw_reset(client); 1640 } else if (ts->keep_power_in_suspend) { 1641 for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) { 1642 error = elants_i2c_send(client, set_active_cmd, 1643 sizeof(set_active_cmd)); 1644 if (!error) 1645 break; 1646 1647 dev_err(&client->dev, 1648 "resume command failed: %d\n", error); 1649 } 1650 } else { 1651 elants_i2c_power_on(ts); 1652 elants_i2c_initialize(ts); 1653 } 1654 1655 ts->state = ELAN_STATE_NORMAL; 1656 enable_irq(client->irq); 1657 1658 return 0; 1659 } 1660 1661 static SIMPLE_DEV_PM_OPS(elants_i2c_pm_ops, 1662 elants_i2c_suspend, elants_i2c_resume); 1663 1664 static const struct i2c_device_id elants_i2c_id[] = { 1665 { DEVICE_NAME, EKTH3500 }, 1666 { "ekth3500", EKTH3500 }, 1667 { "ektf3624", EKTF3624 }, 1668 { } 1669 }; 1670 MODULE_DEVICE_TABLE(i2c, elants_i2c_id); 1671 1672 #ifdef CONFIG_ACPI 1673 static const struct acpi_device_id elants_acpi_id[] = { 1674 { "ELAN0001", EKTH3500 }, 1675 { } 1676 }; 1677 MODULE_DEVICE_TABLE(acpi, elants_acpi_id); 1678 #endif 1679 1680 #ifdef CONFIG_OF 1681 static const struct of_device_id elants_of_match[] = { 1682 { .compatible = "elan,ekth3500", .data = (void *)EKTH3500 }, 1683 { .compatible = "elan,ektf3624", .data = (void *)EKTF3624 }, 1684 { /* sentinel */ } 1685 }; 1686 MODULE_DEVICE_TABLE(of, elants_of_match); 1687 #endif 1688 1689 static struct i2c_driver elants_i2c_driver = { 1690 .probe_new = elants_i2c_probe, 1691 .id_table = elants_i2c_id, 1692 .driver = { 1693 .name = DEVICE_NAME, 1694 .pm = &elants_i2c_pm_ops, 1695 .acpi_match_table = ACPI_PTR(elants_acpi_id), 1696 .of_match_table = of_match_ptr(elants_of_match), 1697 .probe_type = PROBE_PREFER_ASYNCHRONOUS, 1698 }, 1699 }; 1700 module_i2c_driver(elants_i2c_driver); 1701 1702 MODULE_AUTHOR("Scott Liu <scott.liu@emc.com.tw>"); 1703 MODULE_DESCRIPTION("Elan I2c Touchscreen driver"); 1704 MODULE_LICENSE("GPL"); 1705