1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Elan Microelectronics touch panels with I2C interface 4 * 5 * Copyright (C) 2014 Elan Microelectronics Corporation. 6 * Scott Liu <scott.liu@emc.com.tw> 7 * 8 * This code is partly based on hid-multitouch.c: 9 * 10 * Copyright (c) 2010-2012 Stephane Chatty <chatty@enac.fr> 11 * Copyright (c) 2010-2012 Benjamin Tissoires <benjamin.tissoires@gmail.com> 12 * Copyright (c) 2010-2012 Ecole Nationale de l'Aviation Civile, France 13 * 14 * This code is partly based on i2c-hid.c: 15 * 16 * Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@gmail.com> 17 * Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France 18 * Copyright (c) 2012 Red Hat, Inc 19 */ 20 21 22 #include <linux/bits.h> 23 #include <linux/module.h> 24 #include <linux/input.h> 25 #include <linux/interrupt.h> 26 #include <linux/irq.h> 27 #include <linux/platform_device.h> 28 #include <linux/async.h> 29 #include <linux/i2c.h> 30 #include <linux/delay.h> 31 #include <linux/uaccess.h> 32 #include <linux/buffer_head.h> 33 #include <linux/slab.h> 34 #include <linux/firmware.h> 35 #include <linux/input/mt.h> 36 #include <linux/input/touchscreen.h> 37 #include <linux/acpi.h> 38 #include <linux/of.h> 39 #include <linux/gpio/consumer.h> 40 #include <linux/regulator/consumer.h> 41 #include <linux/uuid.h> 42 #include <asm/unaligned.h> 43 44 /* Device, Driver information */ 45 #define DEVICE_NAME "elants_i2c" 46 47 /* Convert from rows or columns into resolution */ 48 #define ELAN_TS_RESOLUTION(n, m) (((n) - 1) * (m)) 49 50 /* FW header data */ 51 #define HEADER_SIZE 4 52 #define FW_HDR_TYPE 0 53 #define FW_HDR_COUNT 1 54 #define FW_HDR_LENGTH 2 55 56 /* Buffer mode Queue Header information */ 57 #define QUEUE_HEADER_SINGLE 0x62 58 #define QUEUE_HEADER_NORMAL 0X63 59 #define QUEUE_HEADER_WAIT 0x64 60 #define QUEUE_HEADER_NORMAL2 0x66 61 62 /* Command header definition */ 63 #define CMD_HEADER_WRITE 0x54 64 #define CMD_HEADER_READ 0x53 65 #define CMD_HEADER_6B_READ 0x5B 66 #define CMD_HEADER_ROM_READ 0x96 67 #define CMD_HEADER_RESP 0x52 68 #define CMD_HEADER_6B_RESP 0x9B 69 #define CMD_HEADER_ROM_RESP 0x95 70 #define CMD_HEADER_HELLO 0x55 71 #define CMD_HEADER_REK 0x66 72 73 /* FW position data */ 74 #define PACKET_SIZE_OLD 40 75 #define PACKET_SIZE 55 76 #define MAX_CONTACT_NUM 10 77 #define FW_POS_HEADER 0 78 #define FW_POS_STATE 1 79 #define FW_POS_TOTAL 2 80 #define FW_POS_XY 3 81 #define FW_POS_TOOL_TYPE 33 82 #define FW_POS_CHECKSUM 34 83 #define FW_POS_WIDTH 35 84 #define FW_POS_PRESSURE 45 85 86 #define HEADER_REPORT_10_FINGER 0x62 87 88 /* Header (4 bytes) plus 3 full 10-finger packets */ 89 #define MAX_PACKET_SIZE 169 90 91 #define BOOT_TIME_DELAY_MS 50 92 93 /* FW read command, 0x53 0x?? 0x0, 0x01 */ 94 #define E_ELAN_INFO_FW_VER 0x00 95 #define E_ELAN_INFO_BC_VER 0x10 96 #define E_ELAN_INFO_X_RES 0x60 97 #define E_ELAN_INFO_Y_RES 0x63 98 #define E_ELAN_INFO_REK 0xD0 99 #define E_ELAN_INFO_TEST_VER 0xE0 100 #define E_ELAN_INFO_FW_ID 0xF0 101 #define E_INFO_OSR 0xD6 102 #define E_INFO_PHY_SCAN 0xD7 103 #define E_INFO_PHY_DRIVER 0xD8 104 105 /* FW write command, 0x54 0x?? 0x0, 0x01 */ 106 #define E_POWER_STATE_SLEEP 0x50 107 #define E_POWER_STATE_RESUME 0x58 108 109 #define MAX_RETRIES 3 110 #define MAX_FW_UPDATE_RETRIES 30 111 112 #define ELAN_FW_PAGESIZE 132 113 114 /* calibration timeout definition */ 115 #define ELAN_CALI_TIMEOUT_MSEC 12000 116 117 #define ELAN_POWERON_DELAY_USEC 500 118 #define ELAN_RESET_DELAY_MSEC 20 119 120 enum elants_chip_id { 121 EKTH3500, 122 EKTF3624, 123 }; 124 125 enum elants_state { 126 ELAN_STATE_NORMAL, 127 ELAN_WAIT_QUEUE_HEADER, 128 ELAN_WAIT_RECALIBRATION, 129 }; 130 131 enum elants_iap_mode { 132 ELAN_IAP_OPERATIONAL, 133 ELAN_IAP_RECOVERY, 134 }; 135 136 /* struct elants_data - represents state of Elan touchscreen device */ 137 struct elants_data { 138 struct i2c_client *client; 139 struct input_dev *input; 140 141 struct regulator *vcc33; 142 struct regulator *vccio; 143 struct gpio_desc *reset_gpio; 144 145 u16 fw_version; 146 u8 test_version; 147 u8 solution_version; 148 u8 bc_version; 149 u8 iap_version; 150 u16 hw_version; 151 u8 major_res; 152 unsigned int x_res; /* resolution in units/mm */ 153 unsigned int y_res; 154 unsigned int x_max; 155 unsigned int y_max; 156 unsigned int phy_x; 157 unsigned int phy_y; 158 struct touchscreen_properties prop; 159 160 enum elants_state state; 161 enum elants_chip_id chip_id; 162 enum elants_iap_mode iap_mode; 163 164 /* Guards against concurrent access to the device via sysfs */ 165 struct mutex sysfs_mutex; 166 167 u8 cmd_resp[HEADER_SIZE]; 168 struct completion cmd_done; 169 170 bool wake_irq_enabled; 171 bool keep_power_in_suspend; 172 173 /* Must be last to be used for DMA operations */ 174 u8 buf[MAX_PACKET_SIZE] ____cacheline_aligned; 175 }; 176 177 static int elants_i2c_send(struct i2c_client *client, 178 const void *data, size_t size) 179 { 180 int ret; 181 182 ret = i2c_master_send(client, data, size); 183 if (ret == size) 184 return 0; 185 186 if (ret >= 0) 187 ret = -EIO; 188 189 dev_err(&client->dev, "%s failed (%*ph): %d\n", 190 __func__, (int)size, data, ret); 191 192 return ret; 193 } 194 195 static int elants_i2c_read(struct i2c_client *client, void *data, size_t size) 196 { 197 int ret; 198 199 ret = i2c_master_recv(client, data, size); 200 if (ret == size) 201 return 0; 202 203 if (ret >= 0) 204 ret = -EIO; 205 206 dev_err(&client->dev, "%s failed: %d\n", __func__, ret); 207 208 return ret; 209 } 210 211 static int elants_i2c_execute_command(struct i2c_client *client, 212 const u8 *cmd, size_t cmd_size, 213 u8 *resp, size_t resp_size, 214 int retries, const char *cmd_name) 215 { 216 struct i2c_msg msgs[2]; 217 int ret; 218 u8 expected_response; 219 220 switch (cmd[0]) { 221 case CMD_HEADER_READ: 222 expected_response = CMD_HEADER_RESP; 223 break; 224 225 case CMD_HEADER_6B_READ: 226 expected_response = CMD_HEADER_6B_RESP; 227 break; 228 229 case CMD_HEADER_ROM_READ: 230 expected_response = CMD_HEADER_ROM_RESP; 231 break; 232 233 default: 234 dev_err(&client->dev, "(%s): invalid command: %*ph\n", 235 cmd_name, (int)cmd_size, cmd); 236 return -EINVAL; 237 } 238 239 for (;;) { 240 msgs[0].addr = client->addr; 241 msgs[0].flags = client->flags & I2C_M_TEN; 242 msgs[0].len = cmd_size; 243 msgs[0].buf = (u8 *)cmd; 244 245 msgs[1].addr = client->addr; 246 msgs[1].flags = (client->flags & I2C_M_TEN) | I2C_M_RD; 247 msgs[1].flags |= I2C_M_RD; 248 msgs[1].len = resp_size; 249 msgs[1].buf = resp; 250 251 ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); 252 if (ret < 0) { 253 if (--retries > 0) { 254 dev_dbg(&client->dev, 255 "(%s) I2C transfer failed: %pe (retrying)\n", 256 cmd_name, ERR_PTR(ret)); 257 continue; 258 } 259 260 dev_err(&client->dev, 261 "(%s) I2C transfer failed: %pe\n", 262 cmd_name, ERR_PTR(ret)); 263 return ret; 264 } 265 266 if (ret != ARRAY_SIZE(msgs) || 267 resp[FW_HDR_TYPE] != expected_response) { 268 if (--retries > 0) { 269 dev_dbg(&client->dev, 270 "(%s) unexpected response: %*ph (retrying)\n", 271 cmd_name, ret, resp); 272 continue; 273 } 274 275 dev_err(&client->dev, 276 "(%s) unexpected response: %*ph\n", 277 cmd_name, ret, resp); 278 return -EIO; 279 } 280 281 return 0; 282 } 283 } 284 285 static int elants_i2c_calibrate(struct elants_data *ts) 286 { 287 struct i2c_client *client = ts->client; 288 int ret, error; 289 static const u8 w_flashkey[] = { CMD_HEADER_WRITE, 0xC0, 0xE1, 0x5A }; 290 static const u8 rek[] = { CMD_HEADER_WRITE, 0x29, 0x00, 0x01 }; 291 static const u8 rek_resp[] = { CMD_HEADER_REK, 0x66, 0x66, 0x66 }; 292 293 disable_irq(client->irq); 294 295 ts->state = ELAN_WAIT_RECALIBRATION; 296 reinit_completion(&ts->cmd_done); 297 298 elants_i2c_send(client, w_flashkey, sizeof(w_flashkey)); 299 elants_i2c_send(client, rek, sizeof(rek)); 300 301 enable_irq(client->irq); 302 303 ret = wait_for_completion_interruptible_timeout(&ts->cmd_done, 304 msecs_to_jiffies(ELAN_CALI_TIMEOUT_MSEC)); 305 306 ts->state = ELAN_STATE_NORMAL; 307 308 if (ret <= 0) { 309 error = ret < 0 ? ret : -ETIMEDOUT; 310 dev_err(&client->dev, 311 "error while waiting for calibration to complete: %d\n", 312 error); 313 return error; 314 } 315 316 if (memcmp(rek_resp, ts->cmd_resp, sizeof(rek_resp))) { 317 dev_err(&client->dev, 318 "unexpected calibration response: %*ph\n", 319 (int)sizeof(ts->cmd_resp), ts->cmd_resp); 320 return -EINVAL; 321 } 322 323 return 0; 324 } 325 326 static int elants_i2c_sw_reset(struct i2c_client *client) 327 { 328 const u8 soft_rst_cmd[] = { 0x77, 0x77, 0x77, 0x77 }; 329 int error; 330 331 error = elants_i2c_send(client, soft_rst_cmd, 332 sizeof(soft_rst_cmd)); 333 if (error) { 334 dev_err(&client->dev, "software reset failed: %d\n", error); 335 return error; 336 } 337 338 /* 339 * We should wait at least 10 msec (but no more than 40) before 340 * sending fastboot or IAP command to the device. 341 */ 342 msleep(30); 343 344 return 0; 345 } 346 347 static u16 elants_i2c_parse_version(u8 *buf) 348 { 349 return get_unaligned_be32(buf) >> 4; 350 } 351 352 static int elants_i2c_query_hw_version(struct elants_data *ts) 353 { 354 struct i2c_client *client = ts->client; 355 int retry_cnt = MAX_RETRIES; 356 const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_FW_ID, 0x00, 0x01 }; 357 u8 resp[HEADER_SIZE]; 358 int error; 359 360 while (retry_cnt--) { 361 error = elants_i2c_execute_command(client, cmd, sizeof(cmd), 362 resp, sizeof(resp), 1, 363 "read fw id"); 364 if (error) 365 return error; 366 367 ts->hw_version = elants_i2c_parse_version(resp); 368 if (ts->hw_version != 0xffff) 369 return 0; 370 } 371 372 dev_err(&client->dev, "Invalid fw id: %#04x\n", ts->hw_version); 373 374 return -EINVAL; 375 } 376 377 static int elants_i2c_query_fw_version(struct elants_data *ts) 378 { 379 struct i2c_client *client = ts->client; 380 int retry_cnt = MAX_RETRIES; 381 const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_FW_VER, 0x00, 0x01 }; 382 u8 resp[HEADER_SIZE]; 383 int error; 384 385 while (retry_cnt--) { 386 error = elants_i2c_execute_command(client, cmd, sizeof(cmd), 387 resp, sizeof(resp), 1, 388 "read fw version"); 389 if (error) 390 return error; 391 392 ts->fw_version = elants_i2c_parse_version(resp); 393 if (ts->fw_version != 0x0000 && ts->fw_version != 0xffff) 394 return 0; 395 396 dev_dbg(&client->dev, "(read fw version) resp %*phC\n", 397 (int)sizeof(resp), resp); 398 } 399 400 dev_err(&client->dev, "Invalid fw ver: %#04x\n", ts->fw_version); 401 402 return -EINVAL; 403 } 404 405 static int elants_i2c_query_test_version(struct elants_data *ts) 406 { 407 struct i2c_client *client = ts->client; 408 int error; 409 u16 version; 410 const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_TEST_VER, 0x00, 0x01 }; 411 u8 resp[HEADER_SIZE]; 412 413 error = elants_i2c_execute_command(client, cmd, sizeof(cmd), 414 resp, sizeof(resp), MAX_RETRIES, 415 "read test version"); 416 if (error) { 417 dev_err(&client->dev, "Failed to read test version\n"); 418 return error; 419 } 420 421 version = elants_i2c_parse_version(resp); 422 ts->test_version = version >> 8; 423 ts->solution_version = version & 0xff; 424 425 return 0; 426 } 427 428 static int elants_i2c_query_bc_version(struct elants_data *ts) 429 { 430 struct i2c_client *client = ts->client; 431 const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_BC_VER, 0x00, 0x01 }; 432 u8 resp[HEADER_SIZE]; 433 u16 version; 434 int error; 435 436 error = elants_i2c_execute_command(client, cmd, sizeof(cmd), 437 resp, sizeof(resp), 1, 438 "read BC version"); 439 if (error) 440 return error; 441 442 version = elants_i2c_parse_version(resp); 443 ts->bc_version = version >> 8; 444 ts->iap_version = version & 0xff; 445 446 return 0; 447 } 448 449 static int elants_i2c_query_ts_info_ektf(struct elants_data *ts) 450 { 451 struct i2c_client *client = ts->client; 452 int error; 453 u8 resp[4]; 454 u16 phy_x, phy_y; 455 const u8 get_xres_cmd[] = { 456 CMD_HEADER_READ, E_ELAN_INFO_X_RES, 0x00, 0x00 457 }; 458 const u8 get_yres_cmd[] = { 459 CMD_HEADER_READ, E_ELAN_INFO_Y_RES, 0x00, 0x00 460 }; 461 462 /* Get X/Y size in mm */ 463 error = elants_i2c_execute_command(client, get_xres_cmd, 464 sizeof(get_xres_cmd), 465 resp, sizeof(resp), 1, 466 "get X size"); 467 if (error) 468 return error; 469 470 phy_x = resp[2] | ((resp[3] & 0xF0) << 4); 471 472 error = elants_i2c_execute_command(client, get_yres_cmd, 473 sizeof(get_yres_cmd), 474 resp, sizeof(resp), 1, 475 "get Y size"); 476 if (error) 477 return error; 478 479 phy_y = resp[2] | ((resp[3] & 0xF0) << 4); 480 481 dev_dbg(&client->dev, "phy_x=%d, phy_y=%d\n", phy_x, phy_y); 482 483 ts->phy_x = phy_x; 484 ts->phy_y = phy_y; 485 486 /* eKTF doesn't report max size, set it to default values */ 487 ts->x_max = 2240 - 1; 488 ts->y_max = 1408 - 1; 489 490 return 0; 491 } 492 493 static int elants_i2c_query_ts_info_ekth(struct elants_data *ts) 494 { 495 struct i2c_client *client = ts->client; 496 int error; 497 u8 resp[17]; 498 u16 phy_x, phy_y, rows, cols, osr; 499 const u8 get_resolution_cmd[] = { 500 CMD_HEADER_6B_READ, 0x00, 0x00, 0x00, 0x00, 0x00 501 }; 502 const u8 get_osr_cmd[] = { 503 CMD_HEADER_READ, E_INFO_OSR, 0x00, 0x01 504 }; 505 const u8 get_physical_scan_cmd[] = { 506 CMD_HEADER_READ, E_INFO_PHY_SCAN, 0x00, 0x01 507 }; 508 const u8 get_physical_drive_cmd[] = { 509 CMD_HEADER_READ, E_INFO_PHY_DRIVER, 0x00, 0x01 510 }; 511 512 /* Get trace number */ 513 error = elants_i2c_execute_command(client, 514 get_resolution_cmd, 515 sizeof(get_resolution_cmd), 516 resp, sizeof(resp), 1, 517 "get resolution"); 518 if (error) 519 return error; 520 521 rows = resp[2] + resp[6] + resp[10]; 522 cols = resp[3] + resp[7] + resp[11]; 523 524 /* Get report resolution value of ABS_MT_TOUCH_MAJOR */ 525 ts->major_res = resp[16]; 526 527 /* Process mm_to_pixel information */ 528 error = elants_i2c_execute_command(client, 529 get_osr_cmd, sizeof(get_osr_cmd), 530 resp, sizeof(resp), 1, "get osr"); 531 if (error) 532 return error; 533 534 osr = resp[3]; 535 536 error = elants_i2c_execute_command(client, 537 get_physical_scan_cmd, 538 sizeof(get_physical_scan_cmd), 539 resp, sizeof(resp), 1, 540 "get physical scan"); 541 if (error) 542 return error; 543 544 phy_x = get_unaligned_be16(&resp[2]); 545 546 error = elants_i2c_execute_command(client, 547 get_physical_drive_cmd, 548 sizeof(get_physical_drive_cmd), 549 resp, sizeof(resp), 1, 550 "get physical drive"); 551 if (error) 552 return error; 553 554 phy_y = get_unaligned_be16(&resp[2]); 555 556 dev_dbg(&client->dev, "phy_x=%d, phy_y=%d\n", phy_x, phy_y); 557 558 if (rows == 0 || cols == 0 || osr == 0) { 559 dev_warn(&client->dev, 560 "invalid trace number data: %d, %d, %d\n", 561 rows, cols, osr); 562 } else { 563 /* translate trace number to TS resolution */ 564 ts->x_max = ELAN_TS_RESOLUTION(rows, osr); 565 ts->x_res = DIV_ROUND_CLOSEST(ts->x_max, phy_x); 566 ts->y_max = ELAN_TS_RESOLUTION(cols, osr); 567 ts->y_res = DIV_ROUND_CLOSEST(ts->y_max, phy_y); 568 ts->phy_x = phy_x; 569 ts->phy_y = phy_y; 570 } 571 572 return 0; 573 } 574 575 static int elants_i2c_fastboot(struct i2c_client *client) 576 { 577 const u8 boot_cmd[] = { 0x4D, 0x61, 0x69, 0x6E }; 578 int error; 579 580 error = elants_i2c_send(client, boot_cmd, sizeof(boot_cmd)); 581 if (error) { 582 dev_err(&client->dev, "boot failed: %d\n", error); 583 return error; 584 } 585 586 dev_dbg(&client->dev, "boot success -- 0x%x\n", client->addr); 587 return 0; 588 } 589 590 static int elants_i2c_initialize(struct elants_data *ts) 591 { 592 struct i2c_client *client = ts->client; 593 int error, error2, retry_cnt; 594 const u8 hello_packet[] = { 0x55, 0x55, 0x55, 0x55 }; 595 const u8 recov_packet[] = { 0x55, 0x55, 0x80, 0x80 }; 596 u8 buf[HEADER_SIZE]; 597 598 for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) { 599 error = elants_i2c_sw_reset(client); 600 if (error) { 601 /* Continue initializing if it's the last try */ 602 if (retry_cnt < MAX_RETRIES - 1) 603 continue; 604 } 605 606 error = elants_i2c_fastboot(client); 607 if (error) { 608 /* Continue initializing if it's the last try */ 609 if (retry_cnt < MAX_RETRIES - 1) 610 continue; 611 } 612 613 /* Wait for Hello packet */ 614 msleep(BOOT_TIME_DELAY_MS); 615 616 error = elants_i2c_read(client, buf, sizeof(buf)); 617 if (error) { 618 dev_err(&client->dev, 619 "failed to read 'hello' packet: %d\n", error); 620 } else if (!memcmp(buf, hello_packet, sizeof(hello_packet))) { 621 ts->iap_mode = ELAN_IAP_OPERATIONAL; 622 break; 623 } else if (!memcmp(buf, recov_packet, sizeof(recov_packet))) { 624 /* 625 * Setting error code will mark device 626 * in recovery mode below. 627 */ 628 error = -EIO; 629 break; 630 } else { 631 error = -EINVAL; 632 dev_err(&client->dev, 633 "invalid 'hello' packet: %*ph\n", 634 (int)sizeof(buf), buf); 635 } 636 } 637 638 /* hw version is available even if device in recovery state */ 639 error2 = elants_i2c_query_hw_version(ts); 640 if (!error2) 641 error2 = elants_i2c_query_bc_version(ts); 642 if (!error) 643 error = error2; 644 645 if (!error) 646 error = elants_i2c_query_fw_version(ts); 647 if (!error) 648 error = elants_i2c_query_test_version(ts); 649 650 switch (ts->chip_id) { 651 case EKTH3500: 652 if (!error) 653 error = elants_i2c_query_ts_info_ekth(ts); 654 break; 655 case EKTF3624: 656 if (!error) 657 error = elants_i2c_query_ts_info_ektf(ts); 658 break; 659 default: 660 BUG(); 661 } 662 663 if (error) 664 ts->iap_mode = ELAN_IAP_RECOVERY; 665 666 return 0; 667 } 668 669 /* 670 * Firmware update interface. 671 */ 672 673 static int elants_i2c_fw_write_page(struct i2c_client *client, 674 const void *page) 675 { 676 const u8 ack_ok[] = { 0xaa, 0xaa }; 677 u8 buf[2]; 678 int retry; 679 int error; 680 681 for (retry = 0; retry < MAX_FW_UPDATE_RETRIES; retry++) { 682 error = elants_i2c_send(client, page, ELAN_FW_PAGESIZE); 683 if (error) { 684 dev_err(&client->dev, 685 "IAP Write Page failed: %d\n", error); 686 continue; 687 } 688 689 error = elants_i2c_read(client, buf, 2); 690 if (error) { 691 dev_err(&client->dev, 692 "IAP Ack read failed: %d\n", error); 693 return error; 694 } 695 696 if (!memcmp(buf, ack_ok, sizeof(ack_ok))) 697 return 0; 698 699 error = -EIO; 700 dev_err(&client->dev, 701 "IAP Get Ack Error [%02x:%02x]\n", 702 buf[0], buf[1]); 703 } 704 705 return error; 706 } 707 708 static int elants_i2c_validate_remark_id(struct elants_data *ts, 709 const struct firmware *fw) 710 { 711 struct i2c_client *client = ts->client; 712 int error; 713 const u8 cmd[] = { CMD_HEADER_ROM_READ, 0x80, 0x1F, 0x00, 0x00, 0x21 }; 714 u8 resp[6] = { 0 }; 715 u16 ts_remark_id = 0; 716 u16 fw_remark_id = 0; 717 718 /* Compare TS Remark ID and FW Remark ID */ 719 error = elants_i2c_execute_command(client, cmd, sizeof(cmd), 720 resp, sizeof(resp), 721 1, "read Remark ID"); 722 if (error) 723 return error; 724 725 ts_remark_id = get_unaligned_be16(&resp[3]); 726 727 fw_remark_id = get_unaligned_le16(&fw->data[fw->size - 4]); 728 729 if (fw_remark_id != ts_remark_id) { 730 dev_err(&client->dev, 731 "Remark ID Mismatched: ts_remark_id=0x%04x, fw_remark_id=0x%04x.\n", 732 ts_remark_id, fw_remark_id); 733 return -EINVAL; 734 } 735 736 return 0; 737 } 738 739 static int elants_i2c_do_update_firmware(struct i2c_client *client, 740 const struct firmware *fw, 741 bool force) 742 { 743 struct elants_data *ts = i2c_get_clientdata(client); 744 const u8 enter_iap[] = { 0x45, 0x49, 0x41, 0x50 }; 745 const u8 enter_iap2[] = { 0x54, 0x00, 0x12, 0x34 }; 746 const u8 iap_ack[] = { 0x55, 0xaa, 0x33, 0xcc }; 747 const u8 close_idle[] = { 0x54, 0x2c, 0x01, 0x01 }; 748 u8 buf[HEADER_SIZE]; 749 u16 send_id; 750 int page, n_fw_pages; 751 int error; 752 bool check_remark_id = ts->iap_version >= 0x60; 753 754 /* Recovery mode detection! */ 755 if (force) { 756 dev_dbg(&client->dev, "Recovery mode procedure\n"); 757 758 if (check_remark_id) { 759 error = elants_i2c_validate_remark_id(ts, fw); 760 if (error) 761 return error; 762 } 763 764 error = elants_i2c_send(client, enter_iap2, sizeof(enter_iap2)); 765 if (error) { 766 dev_err(&client->dev, "failed to enter IAP mode: %d\n", 767 error); 768 return error; 769 } 770 } else { 771 /* Start IAP Procedure */ 772 dev_dbg(&client->dev, "Normal IAP procedure\n"); 773 774 /* Close idle mode */ 775 error = elants_i2c_send(client, close_idle, sizeof(close_idle)); 776 if (error) 777 dev_err(&client->dev, "Failed close idle: %d\n", error); 778 msleep(60); 779 780 elants_i2c_sw_reset(client); 781 msleep(20); 782 783 if (check_remark_id) { 784 error = elants_i2c_validate_remark_id(ts, fw); 785 if (error) 786 return error; 787 } 788 789 error = elants_i2c_send(client, enter_iap, sizeof(enter_iap)); 790 if (error) { 791 dev_err(&client->dev, "failed to enter IAP mode: %d\n", 792 error); 793 return error; 794 } 795 } 796 797 msleep(20); 798 799 /* check IAP state */ 800 error = elants_i2c_read(client, buf, 4); 801 if (error) { 802 dev_err(&client->dev, 803 "failed to read IAP acknowledgement: %d\n", 804 error); 805 return error; 806 } 807 808 if (memcmp(buf, iap_ack, sizeof(iap_ack))) { 809 dev_err(&client->dev, 810 "failed to enter IAP: %*ph (expected %*ph)\n", 811 (int)sizeof(buf), buf, (int)sizeof(iap_ack), iap_ack); 812 return -EIO; 813 } 814 815 dev_info(&client->dev, "successfully entered IAP mode"); 816 817 send_id = client->addr; 818 error = elants_i2c_send(client, &send_id, 1); 819 if (error) { 820 dev_err(&client->dev, "sending dummy byte failed: %d\n", 821 error); 822 return error; 823 } 824 825 /* Clear the last page of Master */ 826 error = elants_i2c_send(client, fw->data, ELAN_FW_PAGESIZE); 827 if (error) { 828 dev_err(&client->dev, "clearing of the last page failed: %d\n", 829 error); 830 return error; 831 } 832 833 error = elants_i2c_read(client, buf, 2); 834 if (error) { 835 dev_err(&client->dev, 836 "failed to read ACK for clearing the last page: %d\n", 837 error); 838 return error; 839 } 840 841 n_fw_pages = fw->size / ELAN_FW_PAGESIZE; 842 dev_dbg(&client->dev, "IAP Pages = %d\n", n_fw_pages); 843 844 for (page = 0; page < n_fw_pages; page++) { 845 error = elants_i2c_fw_write_page(client, 846 fw->data + page * ELAN_FW_PAGESIZE); 847 if (error) { 848 dev_err(&client->dev, 849 "failed to write FW page %d: %d\n", 850 page, error); 851 return error; 852 } 853 } 854 855 /* Old iap needs to wait 200ms for WDT and rest is for hello packets */ 856 msleep(300); 857 858 dev_info(&client->dev, "firmware update completed\n"); 859 return 0; 860 } 861 862 static int elants_i2c_fw_update(struct elants_data *ts) 863 { 864 struct i2c_client *client = ts->client; 865 const struct firmware *fw; 866 char *fw_name; 867 int error; 868 869 fw_name = kasprintf(GFP_KERNEL, "elants_i2c_%04x.bin", ts->hw_version); 870 if (!fw_name) 871 return -ENOMEM; 872 873 dev_info(&client->dev, "requesting fw name = %s\n", fw_name); 874 error = request_firmware(&fw, fw_name, &client->dev); 875 kfree(fw_name); 876 if (error) { 877 dev_err(&client->dev, "failed to request firmware: %d\n", 878 error); 879 return error; 880 } 881 882 if (fw->size % ELAN_FW_PAGESIZE) { 883 dev_err(&client->dev, "invalid firmware length: %zu\n", 884 fw->size); 885 error = -EINVAL; 886 goto out; 887 } 888 889 disable_irq(client->irq); 890 891 error = elants_i2c_do_update_firmware(client, fw, 892 ts->iap_mode == ELAN_IAP_RECOVERY); 893 if (error) { 894 dev_err(&client->dev, "firmware update failed: %d\n", error); 895 ts->iap_mode = ELAN_IAP_RECOVERY; 896 goto out_enable_irq; 897 } 898 899 error = elants_i2c_initialize(ts); 900 if (error) { 901 dev_err(&client->dev, 902 "failed to initialize device after firmware update: %d\n", 903 error); 904 ts->iap_mode = ELAN_IAP_RECOVERY; 905 goto out_enable_irq; 906 } 907 908 ts->iap_mode = ELAN_IAP_OPERATIONAL; 909 910 out_enable_irq: 911 ts->state = ELAN_STATE_NORMAL; 912 enable_irq(client->irq); 913 msleep(100); 914 915 if (!error) 916 elants_i2c_calibrate(ts); 917 out: 918 release_firmware(fw); 919 return error; 920 } 921 922 /* 923 * Event reporting. 924 */ 925 926 static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf, 927 size_t packet_size) 928 { 929 struct input_dev *input = ts->input; 930 unsigned int n_fingers; 931 unsigned int tool_type; 932 u16 finger_state; 933 int i; 934 935 n_fingers = buf[FW_POS_STATE + 1] & 0x0f; 936 finger_state = ((buf[FW_POS_STATE + 1] & 0x30) << 4) | 937 buf[FW_POS_STATE]; 938 939 dev_dbg(&ts->client->dev, 940 "n_fingers: %u, state: %04x\n", n_fingers, finger_state); 941 942 /* Note: all fingers have the same tool type */ 943 tool_type = buf[FW_POS_TOOL_TYPE] & BIT(0) ? 944 MT_TOOL_FINGER : MT_TOOL_PALM; 945 946 for (i = 0; i < MAX_CONTACT_NUM && n_fingers; i++) { 947 if (finger_state & 1) { 948 unsigned int x, y, p, w; 949 u8 *pos; 950 951 pos = &buf[FW_POS_XY + i * 3]; 952 x = (((u16)pos[0] & 0xf0) << 4) | pos[1]; 953 y = (((u16)pos[0] & 0x0f) << 8) | pos[2]; 954 955 /* 956 * eKTF3624 may have use "old" touch-report format, 957 * depending on a device and TS firmware version. 958 * For example, ASUS Transformer devices use the "old" 959 * format, while ASUS Nexus 7 uses the "new" formant. 960 */ 961 if (packet_size == PACKET_SIZE_OLD && 962 ts->chip_id == EKTF3624) { 963 w = buf[FW_POS_WIDTH + i / 2]; 964 w >>= 4 * (~i & 1); 965 w |= w << 4; 966 w |= !w; 967 p = w; 968 } else { 969 p = buf[FW_POS_PRESSURE + i]; 970 w = buf[FW_POS_WIDTH + i]; 971 } 972 973 dev_dbg(&ts->client->dev, "i=%d x=%d y=%d p=%d w=%d\n", 974 i, x, y, p, w); 975 976 input_mt_slot(input, i); 977 input_mt_report_slot_state(input, tool_type, true); 978 touchscreen_report_pos(input, &ts->prop, x, y, true); 979 input_event(input, EV_ABS, ABS_MT_PRESSURE, p); 980 input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, w); 981 982 n_fingers--; 983 } 984 985 finger_state >>= 1; 986 } 987 988 input_mt_sync_frame(input); 989 input_sync(input); 990 } 991 992 static u8 elants_i2c_calculate_checksum(u8 *buf) 993 { 994 u8 checksum = 0; 995 u8 i; 996 997 for (i = 0; i < FW_POS_CHECKSUM; i++) 998 checksum += buf[i]; 999 1000 return checksum; 1001 } 1002 1003 static void elants_i2c_event(struct elants_data *ts, u8 *buf, 1004 size_t packet_size) 1005 { 1006 u8 checksum = elants_i2c_calculate_checksum(buf); 1007 1008 if (unlikely(buf[FW_POS_CHECKSUM] != checksum)) 1009 dev_warn(&ts->client->dev, 1010 "%s: invalid checksum for packet %02x: %02x vs. %02x\n", 1011 __func__, buf[FW_POS_HEADER], 1012 checksum, buf[FW_POS_CHECKSUM]); 1013 else if (unlikely(buf[FW_POS_HEADER] != HEADER_REPORT_10_FINGER)) 1014 dev_warn(&ts->client->dev, 1015 "%s: unknown packet type: %02x\n", 1016 __func__, buf[FW_POS_HEADER]); 1017 else 1018 elants_i2c_mt_event(ts, buf, packet_size); 1019 } 1020 1021 static irqreturn_t elants_i2c_irq(int irq, void *_dev) 1022 { 1023 const u8 wait_packet[] = { 0x64, 0x64, 0x64, 0x64 }; 1024 struct elants_data *ts = _dev; 1025 struct i2c_client *client = ts->client; 1026 int report_count, report_len; 1027 int i; 1028 int len; 1029 1030 len = i2c_master_recv_dmasafe(client, ts->buf, sizeof(ts->buf)); 1031 if (len < 0) { 1032 dev_err(&client->dev, "%s: failed to read data: %d\n", 1033 __func__, len); 1034 goto out; 1035 } 1036 1037 dev_dbg(&client->dev, "%s: packet %*ph\n", 1038 __func__, HEADER_SIZE, ts->buf); 1039 1040 switch (ts->state) { 1041 case ELAN_WAIT_RECALIBRATION: 1042 if (ts->buf[FW_HDR_TYPE] == CMD_HEADER_REK) { 1043 memcpy(ts->cmd_resp, ts->buf, sizeof(ts->cmd_resp)); 1044 complete(&ts->cmd_done); 1045 ts->state = ELAN_STATE_NORMAL; 1046 } 1047 break; 1048 1049 case ELAN_WAIT_QUEUE_HEADER: 1050 if (ts->buf[FW_HDR_TYPE] != QUEUE_HEADER_NORMAL) 1051 break; 1052 1053 ts->state = ELAN_STATE_NORMAL; 1054 fallthrough; 1055 1056 case ELAN_STATE_NORMAL: 1057 1058 switch (ts->buf[FW_HDR_TYPE]) { 1059 case CMD_HEADER_HELLO: 1060 case CMD_HEADER_RESP: 1061 break; 1062 1063 case QUEUE_HEADER_WAIT: 1064 if (memcmp(ts->buf, wait_packet, sizeof(wait_packet))) { 1065 dev_err(&client->dev, 1066 "invalid wait packet %*ph\n", 1067 HEADER_SIZE, ts->buf); 1068 } else { 1069 ts->state = ELAN_WAIT_QUEUE_HEADER; 1070 udelay(30); 1071 } 1072 break; 1073 1074 case QUEUE_HEADER_SINGLE: 1075 elants_i2c_event(ts, &ts->buf[HEADER_SIZE], 1076 ts->buf[FW_HDR_LENGTH]); 1077 break; 1078 1079 case QUEUE_HEADER_NORMAL2: /* CMD_HEADER_REK */ 1080 /* 1081 * Depending on firmware version, eKTF3624 touchscreens 1082 * may utilize one of these opcodes for the touch events: 1083 * 0x63 (NORMAL) and 0x66 (NORMAL2). The 0x63 is used by 1084 * older firmware version and differs from 0x66 such that 1085 * touch pressure value needs to be adjusted. The 0x66 1086 * opcode of newer firmware is equal to 0x63 of eKTH3500. 1087 */ 1088 if (ts->chip_id != EKTF3624) 1089 break; 1090 1091 fallthrough; 1092 1093 case QUEUE_HEADER_NORMAL: 1094 report_count = ts->buf[FW_HDR_COUNT]; 1095 if (report_count == 0 || report_count > 3) { 1096 dev_err(&client->dev, 1097 "bad report count: %*ph\n", 1098 HEADER_SIZE, ts->buf); 1099 break; 1100 } 1101 1102 report_len = ts->buf[FW_HDR_LENGTH] / report_count; 1103 1104 if (report_len == PACKET_SIZE_OLD && 1105 ts->chip_id == EKTF3624) { 1106 dev_dbg_once(&client->dev, 1107 "using old report format\n"); 1108 } else if (report_len != PACKET_SIZE) { 1109 dev_err(&client->dev, 1110 "mismatching report length: %*ph\n", 1111 HEADER_SIZE, ts->buf); 1112 break; 1113 } 1114 1115 for (i = 0; i < report_count; i++) { 1116 u8 *buf = ts->buf + HEADER_SIZE + 1117 i * report_len; 1118 elants_i2c_event(ts, buf, report_len); 1119 } 1120 break; 1121 1122 default: 1123 dev_err(&client->dev, "unknown packet %*ph\n", 1124 HEADER_SIZE, ts->buf); 1125 break; 1126 } 1127 break; 1128 } 1129 1130 out: 1131 return IRQ_HANDLED; 1132 } 1133 1134 /* 1135 * sysfs interface 1136 */ 1137 static ssize_t calibrate_store(struct device *dev, 1138 struct device_attribute *attr, 1139 const char *buf, size_t count) 1140 { 1141 struct i2c_client *client = to_i2c_client(dev); 1142 struct elants_data *ts = i2c_get_clientdata(client); 1143 int error; 1144 1145 error = mutex_lock_interruptible(&ts->sysfs_mutex); 1146 if (error) 1147 return error; 1148 1149 error = elants_i2c_calibrate(ts); 1150 1151 mutex_unlock(&ts->sysfs_mutex); 1152 return error ?: count; 1153 } 1154 1155 static ssize_t write_update_fw(struct device *dev, 1156 struct device_attribute *attr, 1157 const char *buf, size_t count) 1158 { 1159 struct i2c_client *client = to_i2c_client(dev); 1160 struct elants_data *ts = i2c_get_clientdata(client); 1161 int error; 1162 1163 error = mutex_lock_interruptible(&ts->sysfs_mutex); 1164 if (error) 1165 return error; 1166 1167 error = elants_i2c_fw_update(ts); 1168 dev_dbg(dev, "firmware update result: %d\n", error); 1169 1170 mutex_unlock(&ts->sysfs_mutex); 1171 return error ?: count; 1172 } 1173 1174 static ssize_t show_iap_mode(struct device *dev, 1175 struct device_attribute *attr, char *buf) 1176 { 1177 struct i2c_client *client = to_i2c_client(dev); 1178 struct elants_data *ts = i2c_get_clientdata(client); 1179 1180 return sprintf(buf, "%s\n", 1181 ts->iap_mode == ELAN_IAP_OPERATIONAL ? 1182 "Normal" : "Recovery"); 1183 } 1184 1185 static ssize_t show_calibration_count(struct device *dev, 1186 struct device_attribute *attr, char *buf) 1187 { 1188 struct i2c_client *client = to_i2c_client(dev); 1189 const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_REK, 0x00, 0x01 }; 1190 u8 resp[HEADER_SIZE]; 1191 u16 rek_count; 1192 int error; 1193 1194 error = elants_i2c_execute_command(client, cmd, sizeof(cmd), 1195 resp, sizeof(resp), 1, 1196 "read ReK status"); 1197 if (error) 1198 return sprintf(buf, "%d\n", error); 1199 1200 rek_count = get_unaligned_be16(&resp[2]); 1201 return sprintf(buf, "0x%04x\n", rek_count); 1202 } 1203 1204 static DEVICE_ATTR_WO(calibrate); 1205 static DEVICE_ATTR(iap_mode, S_IRUGO, show_iap_mode, NULL); 1206 static DEVICE_ATTR(calibration_count, S_IRUGO, show_calibration_count, NULL); 1207 static DEVICE_ATTR(update_fw, S_IWUSR, NULL, write_update_fw); 1208 1209 struct elants_version_attribute { 1210 struct device_attribute dattr; 1211 size_t field_offset; 1212 size_t field_size; 1213 }; 1214 1215 #define __ELANTS_FIELD_SIZE(_field) \ 1216 sizeof(((struct elants_data *)NULL)->_field) 1217 #define __ELANTS_VERIFY_SIZE(_field) \ 1218 (BUILD_BUG_ON_ZERO(__ELANTS_FIELD_SIZE(_field) > 2) + \ 1219 __ELANTS_FIELD_SIZE(_field)) 1220 #define ELANTS_VERSION_ATTR(_field) \ 1221 struct elants_version_attribute elants_ver_attr_##_field = { \ 1222 .dattr = __ATTR(_field, S_IRUGO, \ 1223 elants_version_attribute_show, NULL), \ 1224 .field_offset = offsetof(struct elants_data, _field), \ 1225 .field_size = __ELANTS_VERIFY_SIZE(_field), \ 1226 } 1227 1228 static ssize_t elants_version_attribute_show(struct device *dev, 1229 struct device_attribute *dattr, 1230 char *buf) 1231 { 1232 struct i2c_client *client = to_i2c_client(dev); 1233 struct elants_data *ts = i2c_get_clientdata(client); 1234 struct elants_version_attribute *attr = 1235 container_of(dattr, struct elants_version_attribute, dattr); 1236 u8 *field = (u8 *)((char *)ts + attr->field_offset); 1237 unsigned int fmt_size; 1238 unsigned int val; 1239 1240 if (attr->field_size == 1) { 1241 val = *field; 1242 fmt_size = 2; /* 2 HEX digits */ 1243 } else { 1244 val = *(u16 *)field; 1245 fmt_size = 4; /* 4 HEX digits */ 1246 } 1247 1248 return sprintf(buf, "%0*x\n", fmt_size, val); 1249 } 1250 1251 static ELANTS_VERSION_ATTR(fw_version); 1252 static ELANTS_VERSION_ATTR(hw_version); 1253 static ELANTS_VERSION_ATTR(test_version); 1254 static ELANTS_VERSION_ATTR(solution_version); 1255 static ELANTS_VERSION_ATTR(bc_version); 1256 static ELANTS_VERSION_ATTR(iap_version); 1257 1258 static struct attribute *elants_attributes[] = { 1259 &dev_attr_calibrate.attr, 1260 &dev_attr_update_fw.attr, 1261 &dev_attr_iap_mode.attr, 1262 &dev_attr_calibration_count.attr, 1263 1264 &elants_ver_attr_fw_version.dattr.attr, 1265 &elants_ver_attr_hw_version.dattr.attr, 1266 &elants_ver_attr_test_version.dattr.attr, 1267 &elants_ver_attr_solution_version.dattr.attr, 1268 &elants_ver_attr_bc_version.dattr.attr, 1269 &elants_ver_attr_iap_version.dattr.attr, 1270 NULL 1271 }; 1272 1273 static const struct attribute_group elants_attribute_group = { 1274 .attrs = elants_attributes, 1275 }; 1276 1277 static int elants_i2c_power_on(struct elants_data *ts) 1278 { 1279 int error; 1280 1281 /* 1282 * If we do not have reset gpio assume platform firmware 1283 * controls regulators and does power them on for us. 1284 */ 1285 if (IS_ERR_OR_NULL(ts->reset_gpio)) 1286 return 0; 1287 1288 gpiod_set_value_cansleep(ts->reset_gpio, 1); 1289 1290 error = regulator_enable(ts->vcc33); 1291 if (error) { 1292 dev_err(&ts->client->dev, 1293 "failed to enable vcc33 regulator: %d\n", 1294 error); 1295 goto release_reset_gpio; 1296 } 1297 1298 error = regulator_enable(ts->vccio); 1299 if (error) { 1300 dev_err(&ts->client->dev, 1301 "failed to enable vccio regulator: %d\n", 1302 error); 1303 regulator_disable(ts->vcc33); 1304 goto release_reset_gpio; 1305 } 1306 1307 /* 1308 * We need to wait a bit after powering on controller before 1309 * we are allowed to release reset GPIO. 1310 */ 1311 udelay(ELAN_POWERON_DELAY_USEC); 1312 1313 release_reset_gpio: 1314 gpiod_set_value_cansleep(ts->reset_gpio, 0); 1315 if (error) 1316 return error; 1317 1318 msleep(ELAN_RESET_DELAY_MSEC); 1319 1320 return 0; 1321 } 1322 1323 static void elants_i2c_power_off(void *_data) 1324 { 1325 struct elants_data *ts = _data; 1326 1327 if (!IS_ERR_OR_NULL(ts->reset_gpio)) { 1328 /* 1329 * Activate reset gpio to prevent leakage through the 1330 * pin once we shut off power to the controller. 1331 */ 1332 gpiod_set_value_cansleep(ts->reset_gpio, 1); 1333 regulator_disable(ts->vccio); 1334 regulator_disable(ts->vcc33); 1335 } 1336 } 1337 1338 #ifdef CONFIG_ACPI 1339 static const struct acpi_device_id i2c_hid_ids[] = { 1340 {"ACPI0C50", 0 }, 1341 {"PNP0C50", 0 }, 1342 { }, 1343 }; 1344 1345 static const guid_t i2c_hid_guid = 1346 GUID_INIT(0x3CDFF6F7, 0x4267, 0x4555, 1347 0xAD, 0x05, 0xB3, 0x0A, 0x3D, 0x89, 0x38, 0xDE); 1348 1349 static bool elants_acpi_is_hid_device(struct device *dev) 1350 { 1351 acpi_handle handle = ACPI_HANDLE(dev); 1352 union acpi_object *obj; 1353 1354 if (acpi_match_device_ids(ACPI_COMPANION(dev), i2c_hid_ids)) 1355 return false; 1356 1357 obj = acpi_evaluate_dsm_typed(handle, &i2c_hid_guid, 1, 1, NULL, ACPI_TYPE_INTEGER); 1358 if (obj) { 1359 ACPI_FREE(obj); 1360 return true; 1361 } 1362 1363 return false; 1364 } 1365 #else 1366 static bool elants_acpi_is_hid_device(struct device *dev) 1367 { 1368 return false; 1369 } 1370 #endif 1371 1372 static int elants_i2c_probe(struct i2c_client *client) 1373 { 1374 union i2c_smbus_data dummy; 1375 struct elants_data *ts; 1376 unsigned long irqflags; 1377 int error; 1378 1379 /* Don't bind to i2c-hid compatible devices, these are handled by the i2c-hid drv. */ 1380 if (elants_acpi_is_hid_device(&client->dev)) { 1381 dev_warn(&client->dev, "This device appears to be an I2C-HID device, not binding\n"); 1382 return -ENODEV; 1383 } 1384 1385 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { 1386 dev_err(&client->dev, "I2C check functionality error\n"); 1387 return -ENXIO; 1388 } 1389 1390 ts = devm_kzalloc(&client->dev, sizeof(struct elants_data), GFP_KERNEL); 1391 if (!ts) 1392 return -ENOMEM; 1393 1394 mutex_init(&ts->sysfs_mutex); 1395 init_completion(&ts->cmd_done); 1396 1397 ts->client = client; 1398 ts->chip_id = (enum elants_chip_id)(uintptr_t)device_get_match_data(&client->dev); 1399 i2c_set_clientdata(client, ts); 1400 1401 ts->vcc33 = devm_regulator_get(&client->dev, "vcc33"); 1402 if (IS_ERR(ts->vcc33)) { 1403 error = PTR_ERR(ts->vcc33); 1404 if (error != -EPROBE_DEFER) 1405 dev_err(&client->dev, 1406 "Failed to get 'vcc33' regulator: %d\n", 1407 error); 1408 return error; 1409 } 1410 1411 ts->vccio = devm_regulator_get(&client->dev, "vccio"); 1412 if (IS_ERR(ts->vccio)) { 1413 error = PTR_ERR(ts->vccio); 1414 if (error != -EPROBE_DEFER) 1415 dev_err(&client->dev, 1416 "Failed to get 'vccio' regulator: %d\n", 1417 error); 1418 return error; 1419 } 1420 1421 ts->reset_gpio = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW); 1422 if (IS_ERR(ts->reset_gpio)) { 1423 error = PTR_ERR(ts->reset_gpio); 1424 1425 if (error == -EPROBE_DEFER) 1426 return error; 1427 1428 if (error != -ENOENT && error != -ENOSYS) { 1429 dev_err(&client->dev, 1430 "failed to get reset gpio: %d\n", 1431 error); 1432 return error; 1433 } 1434 1435 ts->keep_power_in_suspend = true; 1436 } 1437 1438 error = elants_i2c_power_on(ts); 1439 if (error) 1440 return error; 1441 1442 error = devm_add_action_or_reset(&client->dev, 1443 elants_i2c_power_off, ts); 1444 if (error) { 1445 dev_err(&client->dev, 1446 "failed to install power off action: %d\n", error); 1447 return error; 1448 } 1449 1450 /* Make sure there is something at this address */ 1451 if (i2c_smbus_xfer(client->adapter, client->addr, 0, 1452 I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &dummy) < 0) { 1453 dev_err(&client->dev, "nothing at this address\n"); 1454 return -ENXIO; 1455 } 1456 1457 error = elants_i2c_initialize(ts); 1458 if (error) { 1459 dev_err(&client->dev, "failed to initialize: %d\n", error); 1460 return error; 1461 } 1462 1463 ts->input = devm_input_allocate_device(&client->dev); 1464 if (!ts->input) { 1465 dev_err(&client->dev, "Failed to allocate input device\n"); 1466 return -ENOMEM; 1467 } 1468 1469 ts->input->name = "Elan Touchscreen"; 1470 ts->input->id.bustype = BUS_I2C; 1471 1472 /* Multitouch input params setup */ 1473 1474 input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, ts->x_max, 0, 0); 1475 input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, ts->y_max, 0, 0); 1476 input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); 1477 input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0); 1478 input_set_abs_params(ts->input, ABS_MT_TOOL_TYPE, 1479 0, MT_TOOL_PALM, 0, 0); 1480 1481 touchscreen_parse_properties(ts->input, true, &ts->prop); 1482 1483 if (ts->chip_id == EKTF3624 && ts->phy_x && ts->phy_y) { 1484 /* calculate resolution from size */ 1485 ts->x_res = DIV_ROUND_CLOSEST(ts->prop.max_x, ts->phy_x); 1486 ts->y_res = DIV_ROUND_CLOSEST(ts->prop.max_y, ts->phy_y); 1487 } 1488 1489 input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res); 1490 input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res); 1491 input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, ts->major_res); 1492 1493 error = input_mt_init_slots(ts->input, MAX_CONTACT_NUM, 1494 INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); 1495 if (error) { 1496 dev_err(&client->dev, 1497 "failed to initialize MT slots: %d\n", error); 1498 return error; 1499 } 1500 1501 error = input_register_device(ts->input); 1502 if (error) { 1503 dev_err(&client->dev, 1504 "unable to register input device: %d\n", error); 1505 return error; 1506 } 1507 1508 /* 1509 * Platform code (ACPI, DTS) should normally set up interrupt 1510 * for us, but in case it did not let's fall back to using falling 1511 * edge to be compatible with older Chromebooks. 1512 */ 1513 irqflags = irq_get_trigger_type(client->irq); 1514 if (!irqflags) 1515 irqflags = IRQF_TRIGGER_FALLING; 1516 1517 error = devm_request_threaded_irq(&client->dev, client->irq, 1518 NULL, elants_i2c_irq, 1519 irqflags | IRQF_ONESHOT, 1520 client->name, ts); 1521 if (error) { 1522 dev_err(&client->dev, "Failed to register interrupt\n"); 1523 return error; 1524 } 1525 1526 /* 1527 * Systems using device tree should set up wakeup via DTS, 1528 * the rest will configure device as wakeup source by default. 1529 */ 1530 if (!client->dev.of_node) 1531 device_init_wakeup(&client->dev, true); 1532 1533 error = devm_device_add_group(&client->dev, &elants_attribute_group); 1534 if (error) { 1535 dev_err(&client->dev, "failed to create sysfs attributes: %d\n", 1536 error); 1537 return error; 1538 } 1539 1540 return 0; 1541 } 1542 1543 static int __maybe_unused elants_i2c_suspend(struct device *dev) 1544 { 1545 struct i2c_client *client = to_i2c_client(dev); 1546 struct elants_data *ts = i2c_get_clientdata(client); 1547 const u8 set_sleep_cmd[] = { 1548 CMD_HEADER_WRITE, E_POWER_STATE_SLEEP, 0x00, 0x01 1549 }; 1550 int retry_cnt; 1551 int error; 1552 1553 /* Command not support in IAP recovery mode */ 1554 if (ts->iap_mode != ELAN_IAP_OPERATIONAL) 1555 return -EBUSY; 1556 1557 disable_irq(client->irq); 1558 1559 if (device_may_wakeup(dev)) { 1560 /* 1561 * The device will automatically enter idle mode 1562 * that has reduced power consumption. 1563 */ 1564 ts->wake_irq_enabled = (enable_irq_wake(client->irq) == 0); 1565 } else if (ts->keep_power_in_suspend) { 1566 for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) { 1567 error = elants_i2c_send(client, set_sleep_cmd, 1568 sizeof(set_sleep_cmd)); 1569 if (!error) 1570 break; 1571 1572 dev_err(&client->dev, 1573 "suspend command failed: %d\n", error); 1574 } 1575 } else { 1576 elants_i2c_power_off(ts); 1577 } 1578 1579 return 0; 1580 } 1581 1582 static int __maybe_unused elants_i2c_resume(struct device *dev) 1583 { 1584 struct i2c_client *client = to_i2c_client(dev); 1585 struct elants_data *ts = i2c_get_clientdata(client); 1586 const u8 set_active_cmd[] = { 1587 CMD_HEADER_WRITE, E_POWER_STATE_RESUME, 0x00, 0x01 1588 }; 1589 int retry_cnt; 1590 int error; 1591 1592 if (device_may_wakeup(dev)) { 1593 if (ts->wake_irq_enabled) 1594 disable_irq_wake(client->irq); 1595 elants_i2c_sw_reset(client); 1596 } else if (ts->keep_power_in_suspend) { 1597 for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) { 1598 error = elants_i2c_send(client, set_active_cmd, 1599 sizeof(set_active_cmd)); 1600 if (!error) 1601 break; 1602 1603 dev_err(&client->dev, 1604 "resume command failed: %d\n", error); 1605 } 1606 } else { 1607 elants_i2c_power_on(ts); 1608 elants_i2c_initialize(ts); 1609 } 1610 1611 ts->state = ELAN_STATE_NORMAL; 1612 enable_irq(client->irq); 1613 1614 return 0; 1615 } 1616 1617 static SIMPLE_DEV_PM_OPS(elants_i2c_pm_ops, 1618 elants_i2c_suspend, elants_i2c_resume); 1619 1620 static const struct i2c_device_id elants_i2c_id[] = { 1621 { DEVICE_NAME, EKTH3500 }, 1622 { "ekth3500", EKTH3500 }, 1623 { "ektf3624", EKTF3624 }, 1624 { } 1625 }; 1626 MODULE_DEVICE_TABLE(i2c, elants_i2c_id); 1627 1628 #ifdef CONFIG_ACPI 1629 static const struct acpi_device_id elants_acpi_id[] = { 1630 { "ELAN0001", EKTH3500 }, 1631 { } 1632 }; 1633 MODULE_DEVICE_TABLE(acpi, elants_acpi_id); 1634 #endif 1635 1636 #ifdef CONFIG_OF 1637 static const struct of_device_id elants_of_match[] = { 1638 { .compatible = "elan,ekth3500", .data = (void *)EKTH3500 }, 1639 { .compatible = "elan,ektf3624", .data = (void *)EKTF3624 }, 1640 { /* sentinel */ } 1641 }; 1642 MODULE_DEVICE_TABLE(of, elants_of_match); 1643 #endif 1644 1645 static struct i2c_driver elants_i2c_driver = { 1646 .probe_new = elants_i2c_probe, 1647 .id_table = elants_i2c_id, 1648 .driver = { 1649 .name = DEVICE_NAME, 1650 .pm = &elants_i2c_pm_ops, 1651 .acpi_match_table = ACPI_PTR(elants_acpi_id), 1652 .of_match_table = of_match_ptr(elants_of_match), 1653 .probe_type = PROBE_PREFER_ASYNCHRONOUS, 1654 }, 1655 }; 1656 module_i2c_driver(elants_i2c_driver); 1657 1658 MODULE_AUTHOR("Scott Liu <scott.liu@emc.com.tw>"); 1659 MODULE_DESCRIPTION("Elan I2c Touchscreen driver"); 1660 MODULE_LICENSE("GPL"); 1661