1 /* 2 * Driver for EETI eGalax Multiple Touch Controller 3 * 4 * Copyright (C) 2011 Freescale Semiconductor, Inc. 5 * 6 * based on max11801_ts.c 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 as 10 * published by the Free Software Foundation. 11 */ 12 13 /* EETI eGalax serial touch screen controller is a I2C based multiple 14 * touch screen controller, it supports 5 point multiple touch. */ 15 16 /* TODO: 17 - auto idle mode support 18 */ 19 20 #include <linux/module.h> 21 #include <linux/init.h> 22 #include <linux/i2c.h> 23 #include <linux/interrupt.h> 24 #include <linux/input.h> 25 #include <linux/irq.h> 26 #include <linux/gpio.h> 27 #include <linux/delay.h> 28 #include <linux/slab.h> 29 #include <linux/bitops.h> 30 #include <linux/input/mt.h> 31 32 /* 33 * Mouse Mode: some panel may configure the controller to mouse mode, 34 * which can only report one point at a given time. 35 * This driver will ignore events in this mode. 36 */ 37 #define REPORT_MODE_MOUSE 0x1 38 /* 39 * Vendor Mode: this mode is used to transfer some vendor specific 40 * messages. 41 * This driver will ignore events in this mode. 42 */ 43 #define REPORT_MODE_VENDOR 0x3 44 /* Multiple Touch Mode */ 45 #define REPORT_MODE_MTTOUCH 0x4 46 47 #define MAX_SUPPORT_POINTS 5 48 49 #define EVENT_VALID_OFFSET 7 50 #define EVENT_VALID_MASK (0x1 << EVENT_VALID_OFFSET) 51 #define EVENT_ID_OFFSET 2 52 #define EVENT_ID_MASK (0xf << EVENT_ID_OFFSET) 53 #define EVENT_IN_RANGE (0x1 << 1) 54 #define EVENT_DOWN_UP (0X1 << 0) 55 56 #define MAX_I2C_DATA_LEN 10 57 58 #define EGALAX_MAX_X 32760 59 #define EGALAX_MAX_Y 32760 60 #define EGALAX_MAX_TRIES 100 61 62 struct egalax_ts { 63 struct i2c_client *client; 64 struct input_dev *input_dev; 65 }; 66 67 static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id) 68 { 69 struct egalax_ts *ts = dev_id; 70 struct input_dev *input_dev = ts->input_dev; 71 struct i2c_client *client = ts->client; 72 u8 buf[MAX_I2C_DATA_LEN]; 73 int id, ret, x, y, z; 74 int tries = 0; 75 bool down, valid; 76 u8 state; 77 78 do { 79 ret = i2c_master_recv(client, buf, MAX_I2C_DATA_LEN); 80 } while (ret == -EAGAIN && tries++ < EGALAX_MAX_TRIES); 81 82 if (ret < 0) 83 return IRQ_HANDLED; 84 85 if (buf[0] != REPORT_MODE_MTTOUCH) { 86 /* ignore mouse events and vendor events */ 87 return IRQ_HANDLED; 88 } 89 90 state = buf[1]; 91 x = (buf[3] << 8) | buf[2]; 92 y = (buf[5] << 8) | buf[4]; 93 z = (buf[7] << 8) | buf[6]; 94 95 valid = state & EVENT_VALID_MASK; 96 id = (state & EVENT_ID_MASK) >> EVENT_ID_OFFSET; 97 down = state & EVENT_DOWN_UP; 98 99 if (!valid || id > MAX_SUPPORT_POINTS) { 100 dev_dbg(&client->dev, "point invalid\n"); 101 return IRQ_HANDLED; 102 } 103 104 input_mt_slot(input_dev, id); 105 input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, down); 106 107 dev_dbg(&client->dev, "%s id:%d x:%d y:%d z:%d", 108 down ? "down" : "up", id, x, y, z); 109 110 if (down) { 111 input_report_abs(input_dev, ABS_MT_POSITION_X, x); 112 input_report_abs(input_dev, ABS_MT_POSITION_Y, y); 113 input_report_abs(input_dev, ABS_MT_PRESSURE, z); 114 } 115 116 input_mt_report_pointer_emulation(input_dev, true); 117 input_sync(input_dev); 118 119 return IRQ_HANDLED; 120 } 121 122 /* wake up controller by an falling edge of interrupt gpio. */ 123 static int egalax_wake_up_device(struct i2c_client *client) 124 { 125 int gpio = irq_to_gpio(client->irq); 126 int ret; 127 128 ret = gpio_request(gpio, "egalax_irq"); 129 if (ret < 0) { 130 dev_err(&client->dev, 131 "request gpio failed, cannot wake up controller: %d\n", 132 ret); 133 return ret; 134 } 135 136 /* wake up controller via an falling edge on IRQ gpio. */ 137 gpio_direction_output(gpio, 0); 138 gpio_set_value(gpio, 1); 139 140 /* controller should be waken up, return irq. */ 141 gpio_direction_input(gpio); 142 gpio_free(gpio); 143 144 return 0; 145 } 146 147 static int __devinit egalax_firmware_version(struct i2c_client *client) 148 { 149 static const u8 cmd[MAX_I2C_DATA_LEN] = { 0x03, 0x03, 0xa, 0x01, 0x41 }; 150 int ret; 151 152 ret = i2c_master_send(client, cmd, MAX_I2C_DATA_LEN); 153 if (ret < 0) 154 return ret; 155 156 return 0; 157 } 158 159 static int __devinit egalax_ts_probe(struct i2c_client *client, 160 const struct i2c_device_id *id) 161 { 162 struct egalax_ts *ts; 163 struct input_dev *input_dev; 164 int ret; 165 int error; 166 167 ts = kzalloc(sizeof(struct egalax_ts), GFP_KERNEL); 168 if (!ts) { 169 dev_err(&client->dev, "Failed to allocate memory\n"); 170 return -ENOMEM; 171 } 172 173 input_dev = input_allocate_device(); 174 if (!input_dev) { 175 dev_err(&client->dev, "Failed to allocate memory\n"); 176 error = -ENOMEM; 177 goto err_free_ts; 178 } 179 180 ts->client = client; 181 ts->input_dev = input_dev; 182 183 /* controller may be in sleep, wake it up. */ 184 egalax_wake_up_device(client); 185 186 ret = egalax_firmware_version(client); 187 if (ret < 0) { 188 dev_err(&client->dev, "Failed to read firmware version\n"); 189 error = -EIO; 190 goto err_free_dev; 191 } 192 193 input_dev->name = "EETI eGalax Touch Screen"; 194 input_dev->id.bustype = BUS_I2C; 195 input_dev->dev.parent = &client->dev; 196 197 __set_bit(EV_ABS, input_dev->evbit); 198 __set_bit(EV_KEY, input_dev->evbit); 199 __set_bit(BTN_TOUCH, input_dev->keybit); 200 201 input_set_abs_params(input_dev, ABS_X, 0, EGALAX_MAX_X, 0, 0); 202 input_set_abs_params(input_dev, ABS_Y, 0, EGALAX_MAX_Y, 0, 0); 203 input_set_abs_params(input_dev, 204 ABS_MT_POSITION_X, 0, EGALAX_MAX_X, 0, 0); 205 input_set_abs_params(input_dev, 206 ABS_MT_POSITION_X, 0, EGALAX_MAX_Y, 0, 0); 207 input_mt_init_slots(input_dev, MAX_SUPPORT_POINTS); 208 209 input_set_drvdata(input_dev, ts); 210 211 error = request_threaded_irq(client->irq, NULL, egalax_ts_interrupt, 212 IRQF_TRIGGER_LOW | IRQF_ONESHOT, 213 "egalax_ts", ts); 214 if (error < 0) { 215 dev_err(&client->dev, "Failed to register interrupt\n"); 216 goto err_free_dev; 217 } 218 219 error = input_register_device(ts->input_dev); 220 if (error) 221 goto err_free_irq; 222 223 i2c_set_clientdata(client, ts); 224 return 0; 225 226 err_free_irq: 227 free_irq(client->irq, ts); 228 err_free_dev: 229 input_free_device(input_dev); 230 err_free_ts: 231 kfree(ts); 232 233 return error; 234 } 235 236 static __devexit int egalax_ts_remove(struct i2c_client *client) 237 { 238 struct egalax_ts *ts = i2c_get_clientdata(client); 239 240 free_irq(client->irq, ts); 241 242 input_unregister_device(ts->input_dev); 243 kfree(ts); 244 245 return 0; 246 } 247 248 static const struct i2c_device_id egalax_ts_id[] = { 249 { "egalax_ts", 0 }, 250 { } 251 }; 252 MODULE_DEVICE_TABLE(i2c, egalax_ts_id); 253 254 #ifdef CONFIG_PM_SLEEP 255 static int egalax_ts_suspend(struct device *dev) 256 { 257 static const u8 suspend_cmd[MAX_I2C_DATA_LEN] = { 258 0x3, 0x6, 0xa, 0x3, 0x36, 0x3f, 0x2, 0, 0, 0 259 }; 260 struct i2c_client *client = to_i2c_client(dev); 261 int ret; 262 263 ret = i2c_master_send(client, suspend_cmd, MAX_I2C_DATA_LEN); 264 return ret > 0 ? 0 : ret; 265 } 266 267 static int egalax_ts_resume(struct device *dev) 268 { 269 struct i2c_client *client = to_i2c_client(dev); 270 271 return egalax_wake_up_device(client); 272 } 273 #endif 274 275 static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume); 276 277 static struct i2c_driver egalax_ts_driver = { 278 .driver = { 279 .name = "egalax_ts", 280 .owner = THIS_MODULE, 281 .pm = &egalax_ts_pm_ops, 282 }, 283 .id_table = egalax_ts_id, 284 .probe = egalax_ts_probe, 285 .remove = __devexit_p(egalax_ts_remove), 286 }; 287 288 module_i2c_driver(egalax_ts_driver); 289 290 MODULE_AUTHOR("Freescale Semiconductor, Inc."); 291 MODULE_DESCRIPTION("Touchscreen driver for EETI eGalax touch controller"); 292 MODULE_LICENSE("GPL"); 293