1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Touchscreen driver configuration
4#
5menuconfig INPUT_TOUCHSCREEN
6	bool "Touchscreens"
7	help
8	  Say Y here, and a list of supported touchscreens will be displayed.
9	  This option doesn't affect the kernel.
10
11	  If unsure, say Y.
12
13if INPUT_TOUCHSCREEN
14
15config TOUCHSCREEN_88PM860X
16	tristate "Marvell 88PM860x touchscreen"
17	depends on MFD_88PM860X
18	help
19	  Say Y here if you have a 88PM860x PMIC and want to enable
20	  support for the built-in touchscreen.
21
22	  If unsure, say N.
23
24	  To compile this driver as a module, choose M here: the
25	  module will be called 88pm860x-ts.
26
27config TOUCHSCREEN_ADS7846
28	tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
29	depends on SPI_MASTER
30	depends on HWMON = n || HWMON
31	help
32	  Say Y here if you have a touchscreen interface using the
33	  ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
34	  and your board-specific setup code includes that in its
35	  table of SPI devices.
36
37	  If HWMON is selected, and the driver is told the reference voltage
38	  on your board, you will also get hwmon interfaces for the voltage
39	  (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
40
41	  If unsure, say N (but it's safe to say "Y").
42
43	  To compile this driver as a module, choose M here: the
44	  module will be called ads7846.
45
46config TOUCHSCREEN_AD7877
47	tristate "AD7877 based touchscreens"
48	depends on SPI_MASTER
49	help
50	  Say Y here if you have a touchscreen interface using the
51	  AD7877 controller, and your board-specific initialization
52	  code includes that in its table of SPI devices.
53
54	  If unsure, say N (but it's safe to say "Y").
55
56	  To compile this driver as a module, choose M here: the
57	  module will be called ad7877.
58
59config TOUCHSCREEN_AD7879
60	tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
61	help
62	  Say Y here if you want to support a touchscreen interface using
63	  the AD7879-1/AD7889-1 controller.
64
65	  You should select a bus connection too.
66
67	  To compile this driver as a module, choose M here: the
68	  module will be called ad7879.
69
70config TOUCHSCREEN_AD7879_I2C
71	tristate "support I2C bus connection"
72	depends on TOUCHSCREEN_AD7879 && I2C
73	select REGMAP_I2C
74	help
75	  Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
76
77	  To compile this driver as a module, choose M here: the
78	  module will be called ad7879-i2c.
79
80config TOUCHSCREEN_AD7879_SPI
81	tristate "support SPI bus connection"
82	depends on TOUCHSCREEN_AD7879 && SPI_MASTER
83	select REGMAP_SPI
84	help
85	  Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
86
87	  If unsure, say N (but it's safe to say "Y").
88
89	  To compile this driver as a module, choose M here: the
90	  module will be called ad7879-spi.
91
92config TOUCHSCREEN_ADC
93	tristate "Generic ADC based resistive touchscreen"
94	depends on IIO
95	select IIO_BUFFER
96	select IIO_BUFFER_CB
97	help
98	  Say Y here if you want to use the generic ADC
99	  resistive touchscreen driver.
100
101	  If unsure, say N (but it's safe to say "Y").
102
103	  To compile this driver as a module, choose M here: the
104	  module will be called resistive-adc-touch.ko.
105
106config TOUCHSCREEN_AR1021_I2C
107	tristate "Microchip AR1020/1021 i2c touchscreen"
108	depends on I2C && OF
109	help
110	  Say Y here if you have the Microchip AR1020 or AR1021 touchscreen
111	  controller chip in your system.
112
113	  If unsure, say N.
114
115	  To compile this driver as a module, choose M here: the
116	  module will be called ar1021_i2c.
117
118config TOUCHSCREEN_ATMEL_MXT
119	tristate "Atmel mXT I2C Touchscreen"
120	depends on I2C
121	select FW_LOADER
122	help
123	  Say Y here if you have Atmel mXT series I2C touchscreen,
124	  such as AT42QT602240/ATMXT224, connected to your system.
125
126	  If unsure, say N.
127
128	  To compile this driver as a module, choose M here: the
129	  module will be called atmel_mxt_ts.
130
131config TOUCHSCREEN_ATMEL_MXT_T37
132	bool "Support T37 Diagnostic Data"
133	depends on TOUCHSCREEN_ATMEL_MXT
134	depends on VIDEO_DEV=y || (TOUCHSCREEN_ATMEL_MXT=m && VIDEO_DEV=m)
135	select VIDEOBUF2_VMALLOC
136	help
137	  Say Y here if you want support to output data from the T37
138	  Diagnostic Data object using a V4L device.
139
140config TOUCHSCREEN_AUO_PIXCIR
141	tristate "AUO in-cell touchscreen using Pixcir ICs"
142	depends on I2C
143	depends on GPIOLIB || COMPILE_TEST
144	help
145	  Say Y here if you have a AUO display with in-cell touchscreen
146	  using Pixcir ICs.
147
148	  If unsure, say N.
149
150	  To compile this driver as a module, choose M here: the
151	  module will be called auo-pixcir-ts.
152
153config TOUCHSCREEN_BU21013
154	tristate "BU21013 based touch panel controllers"
155	depends on I2C
156	help
157	  Say Y here if you have a bu21013 touchscreen connected to
158	  your system.
159
160	  If unsure, say N.
161
162	  To compile this driver as a module, choose M here: the
163	  module will be called bu21013_ts.
164
165config TOUCHSCREEN_BU21029
166	tristate "Rohm BU21029 based touch panel controllers"
167	depends on I2C
168	help
169	  Say Y here if you have a Rohm BU21029 touchscreen controller
170	  connected to your system.
171
172	  If unsure, say N.
173
174	  To compile this driver as a module, choose M here: the
175	  module will be called bu21029_ts.
176
177config TOUCHSCREEN_CHIPONE_ICN8318
178	tristate "chipone icn8318 touchscreen controller"
179	depends on GPIOLIB || COMPILE_TEST
180	depends on I2C
181	depends on OF
182	help
183	  Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
184
185	  If unsure, say N.
186
187	  To compile this driver as a module, choose M here: the
188	  module will be called chipone_icn8318.
189
190config TOUCHSCREEN_CHIPONE_ICN8505
191	tristate "chipone icn8505 touchscreen controller"
192	depends on I2C && ACPI
193	help
194	  Say Y here if you have a ChipOne icn8505 based I2C touchscreen.
195
196	  If unsure, say N.
197
198	  To compile this driver as a module, choose M here: the
199	  module will be called chipone_icn8505.
200
201config TOUCHSCREEN_CY8CTMA140
202	tristate "cy8ctma140 touchscreen"
203	depends on I2C
204	help
205	  Say Y here if you have a Cypress CY8CTMA140 capacitive
206	  touchscreen also just known as "TMA140"
207
208	  If unsure, say N.
209
210	  To compile this driver as a module, choose M here: the
211	  module will be called cy8ctma140.
212
213config TOUCHSCREEN_CY8CTMG110
214	tristate "cy8ctmg110 touchscreen"
215	depends on I2C
216	depends on GPIOLIB || COMPILE_TEST
217	help
218	  Say Y here if you have a cy8ctmg110 capacitive touchscreen on
219	  an AAVA device.
220
221	  If unsure, say N.
222
223	  To compile this driver as a module, choose M here: the
224	  module will be called cy8ctmg110_ts.
225
226config TOUCHSCREEN_CYTTSP_CORE
227	tristate "Cypress TTSP touchscreen"
228	help
229	  Say Y here if you have a touchscreen using controller from
230	  the Cypress TrueTouch(tm) Standard Product family connected
231	  to your system. You will also need to select appropriate
232	  bus connection below.
233
234	  If unsure, say N.
235
236	  To compile this driver as a module, choose M here: the
237	  module will be called cyttsp_core.
238
239config TOUCHSCREEN_CYTTSP_I2C
240	tristate "support I2C bus connection"
241	depends on TOUCHSCREEN_CYTTSP_CORE && I2C
242	help
243	  Say Y here if the touchscreen is connected via I2C bus.
244
245	  To compile this driver as a module, choose M here: the
246	  module will be called cyttsp_i2c.
247
248config TOUCHSCREEN_CYTTSP_SPI
249	tristate "support SPI bus connection"
250	depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
251	help
252	  Say Y here if the touchscreen is connected via SPI bus.
253
254	  To compile this driver as a module, choose M here: the
255	  module will be called cyttsp_spi.
256
257config TOUCHSCREEN_CYTTSP4_CORE
258	tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
259	help
260	  Core driver for Cypress TrueTouch(tm) Standard Product
261	  Generation4 touchscreen controllers.
262
263	  Say Y here if you have a Cypress Gen4 touchscreen.
264
265	  If unsure, say N.
266
267	  To compile this driver as a module, choose M here.
268
269config TOUCHSCREEN_CYTTSP4_I2C
270	tristate "support I2C bus connection"
271	depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
272	help
273	  Say Y here if the touchscreen is connected via I2C bus.
274
275	  To compile this driver as a module, choose M here: the
276	  module will be called cyttsp4_i2c.
277
278config TOUCHSCREEN_CYTTSP4_SPI
279	tristate "support SPI bus connection"
280	depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
281	help
282	  Say Y here if the touchscreen is connected via SPI bus.
283
284	  To compile this driver as a module, choose M here: the
285	  module will be called cyttsp4_spi.
286
287config TOUCHSCREEN_DA9034
288	tristate "Touchscreen support for Dialog Semiconductor DA9034"
289	depends on PMIC_DA903X
290	default y
291	help
292	  Say Y here to enable the support for the touchscreen found
293	  on Dialog Semiconductor DA9034 PMIC.
294
295	  If unsure, say N.
296
297	  To compile this driver as a module, choose M here: the
298	  module will be called da9034-ts.
299
300config TOUCHSCREEN_DA9052
301	tristate "Dialog DA9052/DA9053 TSI"
302	depends on PMIC_DA9052
303	help
304	  Say Y here to support the touchscreen found on Dialog Semiconductor
305	  DA9052-BC and DA9053-AA/Bx PMICs.
306
307	  If unsure, say N.
308
309	  To compile this driver as a module, choose M here: the
310	  module will be called da9052_tsi.
311
312config TOUCHSCREEN_DYNAPRO
313	tristate "Dynapro serial touchscreen"
314	select SERIO
315	help
316	  Say Y here if you have a Dynapro serial touchscreen connected to
317	  your system.
318
319	  If unsure, say N.
320
321	  To compile this driver as a module, choose M here: the
322	  module will be called dynapro.
323
324config TOUCHSCREEN_HAMPSHIRE
325	tristate "Hampshire serial touchscreen"
326	select SERIO
327	help
328	  Say Y here if you have a Hampshire serial touchscreen connected to
329	  your system.
330
331	  If unsure, say N.
332
333	  To compile this driver as a module, choose M here: the
334	  module will be called hampshire.
335
336config TOUCHSCREEN_EETI
337	tristate "EETI touchscreen panel support"
338	depends on I2C
339	help
340	  Say Y here to enable support for I2C connected EETI touch panels.
341
342	  To compile this driver as a module, choose M here: the
343	  module will be called eeti_ts.
344
345config TOUCHSCREEN_EGALAX
346	tristate "EETI eGalax multi-touch panel support"
347	depends on I2C && OF
348	help
349	  Say Y here to enable support for I2C connected EETI
350	  eGalax multi-touch panels.
351
352	  To compile this driver as a module, choose M here: the
353	  module will be called egalax_ts.
354
355config TOUCHSCREEN_EGALAX_SERIAL
356	tristate "EETI eGalax serial touchscreen"
357	select SERIO
358	help
359	  Say Y here to enable support for serial connected EETI
360	  eGalax touch panels.
361
362	  To compile this driver as a module, choose M here: the
363	  module will be called egalax_ts_serial.
364
365config TOUCHSCREEN_EXC3000
366	tristate "EETI EXC3000 multi-touch panel support"
367	depends on I2C
368	help
369	  Say Y here to enable support for I2C connected EETI
370	  EXC3000 multi-touch panels.
371
372	  To compile this driver as a module, choose M here: the
373	  module will be called exc3000.
374
375config TOUCHSCREEN_FUJITSU
376	tristate "Fujitsu serial touchscreen"
377	select SERIO
378	help
379	  Say Y here if you have the Fujitsu touchscreen (such as one
380	  installed in Lifebook P series laptop) connected to your
381	  system.
382
383	  If unsure, say N.
384
385	  To compile this driver as a module, choose M here: the
386	  module will be called fujitsu-ts.
387
388config TOUCHSCREEN_GOODIX
389	tristate "Goodix I2C touchscreen"
390	depends on I2C
391	depends on GPIOLIB || COMPILE_TEST
392	help
393	  Say Y here if you have the Goodix touchscreen (such as one
394	  installed in Onda v975w tablets) connected to your
395	  system. It also supports 5-finger chip models, which can be
396	  found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
397
398	  If unsure, say N.
399
400	  To compile this driver as a module, choose M here: the
401	  module will be called goodix.
402
403config TOUCHSCREEN_HIDEEP
404	tristate "HiDeep Touch IC"
405	depends on I2C
406	help
407	  Say Y here if you have a touchscreen using HiDeep.
408
409	  If unsure, say N.
410
411	  To compile this driver as a module, choose M here : the
412	  module will be called hideep_ts.
413
414config TOUCHSCREEN_HYCON_HY46XX
415	tristate "Hycon hy46xx touchscreen support"
416	depends on I2C
417	help
418	  Say Y here if you have a touchscreen using Hycon hy46xx
419
420	  If unsure, say N.
421
422	  To compile this driver as a module, choose M here: the
423	  module will be called hycon-hy46xx.
424
425config TOUCHSCREEN_ILI210X
426	tristate "Ilitek ILI210X based touchscreen"
427	depends on I2C
428	select CRC_CCITT
429	help
430	  Say Y here if you have a ILI210X based touchscreen
431	  controller. This driver supports models ILI2102,
432	  ILI2102s, ILI2103, ILI2103s and ILI2105.
433	  Such kind of chipsets can be found in Amazon Kindle Fire
434	  touchscreens.
435
436	  If unsure, say N.
437
438	  To compile this driver as a module, choose M here: the
439	  module will be called ili210x.
440
441config TOUCHSCREEN_ILITEK
442	tristate "Ilitek I2C 213X/23XX/25XX/Lego Series Touch ICs"
443	depends on I2C
444	help
445	  Say Y here if you have touchscreen with ILITEK touch IC,
446	  it supports 213X/23XX/25XX and other Lego series.
447
448	  If unsure, say N.
449
450	  To compile this driver as a module, choose M here: the
451	  module will be called ilitek_ts_i2c.
452
453config TOUCHSCREEN_IPROC
454	tristate "IPROC touch panel driver support"
455	depends on ARCH_BCM_IPROC || COMPILE_TEST
456	help
457	  Say Y here if you want to add support for the IPROC touch
458	  controller to your system.
459
460	  If unsure, say N.
461
462	  To compile this driver as a module, choose M here: the
463	  module will be called bcm_iproc_tsc.
464
465config TOUCHSCREEN_S3C2410
466	tristate "Samsung S3C2410/generic touchscreen input driver"
467	depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
468	depends on S3C_ADC
469	help
470	  Say Y here if you have the s3c2410 touchscreen.
471
472	  If unsure, say N.
473
474	  To compile this driver as a module, choose M here: the
475	  module will be called s3c2410_ts.
476
477config TOUCHSCREEN_S6SY761
478	tristate "Samsung S6SY761 Touchscreen driver"
479	depends on I2C
480	help
481	  Say Y if you have the Samsung S6SY761 driver
482
483	  If unsure, say N
484
485	  To compile this driver as module, choose M here: the
486	  module will be called s6sy761.
487
488config TOUCHSCREEN_GUNZE
489	tristate "Gunze AHL-51S touchscreen"
490	select SERIO
491	help
492	  Say Y here if you have the Gunze AHL-51 touchscreen connected to
493	  your system.
494
495	  If unsure, say N.
496
497	  To compile this driver as a module, choose M here: the
498	  module will be called gunze.
499
500config TOUCHSCREEN_EKTF2127
501	tristate "Elan eKTF2127 I2C touchscreen"
502	depends on I2C
503	help
504	  Say Y here if you have an Elan eKTF2127 touchscreen
505	  connected to your system.
506
507	  If unsure, say N.
508
509	  To compile this driver as a module, choose M here: the
510	  module will be called ektf2127.
511
512config TOUCHSCREEN_ELAN
513	tristate "Elan eKTH I2C touchscreen"
514	depends on I2C
515	help
516	  Say Y here if you have an Elan eKTH I2C touchscreen
517	  connected to your system.
518
519	  If unsure, say N.
520
521	  To compile this driver as a module, choose M here: the
522	  module will be called elants_i2c.
523
524config TOUCHSCREEN_ELO
525	tristate "Elo serial touchscreens"
526	select SERIO
527	help
528	  Say Y here if you have an Elo serial touchscreen connected to
529	  your system.
530
531	  If unsure, say N.
532
533	  To compile this driver as a module, choose M here: the
534	  module will be called elo.
535
536config TOUCHSCREEN_WACOM_W8001
537	tristate "Wacom W8001 penabled serial touchscreen"
538	select SERIO
539	help
540	  Say Y here if you have an Wacom W8001 penabled serial touchscreen
541	  connected to your system.
542
543	  If unsure, say N.
544
545	  To compile this driver as a module, choose M here: the
546	  module will be called wacom_w8001.
547
548config TOUCHSCREEN_WACOM_I2C
549	tristate "Wacom Tablet support (I2C)"
550	depends on I2C
551	help
552	  Say Y here if you want to use the I2C version of the Wacom
553	  Pen Tablet.
554
555	  If unsure, say N.
556
557	  To compile this driver as a module, choose M here: the module
558	  will be called wacom_i2c.
559
560config TOUCHSCREEN_LPC32XX
561	tristate "LPC32XX touchscreen controller"
562	depends on ARCH_LPC32XX
563	help
564	  Say Y here if you have a LPC32XX device and want
565	  to support the built-in touchscreen.
566
567	  To compile this driver as a module, choose M here: the
568	  module will be called lpc32xx_ts.
569
570config TOUCHSCREEN_MAX11801
571	tristate "MAX11801 based touchscreens"
572	depends on I2C
573	help
574	  Say Y here if you have a MAX11801 based touchscreen
575	  controller.
576
577	  If unsure, say N.
578
579	  To compile this driver as a module, choose M here: the
580	  module will be called max11801_ts.
581
582config TOUCHSCREEN_MCS5000
583	tristate "MELFAS MCS-5000 touchscreen"
584	depends on I2C
585	help
586	  Say Y here if you have the MELFAS MCS-5000 touchscreen controller
587	  chip in your system.
588
589	  If unsure, say N.
590
591	  To compile this driver as a module, choose M here: the
592	  module will be called mcs5000_ts.
593
594config TOUCHSCREEN_MMS114
595	tristate "MELFAS MMS114 touchscreen"
596	depends on I2C
597	help
598	  Say Y here if you have the MELFAS MMS114 touchscreen controller
599	  chip in your system.
600
601	  If unsure, say N.
602
603	  To compile this driver as a module, choose M here: the
604	  module will be called mms114.
605
606config TOUCHSCREEN_MELFAS_MIP4
607	tristate "MELFAS MIP4 Touchscreen"
608	depends on I2C
609	help
610	  Say Y here if you have a MELFAS MIP4 Touchscreen device.
611
612	  If unsure, say N.
613
614	  To compile this driver as a module, choose M here:
615	  the module will be called melfas_mip4.
616
617config TOUCHSCREEN_MSG2638
618	tristate "MStar msg2638 touchscreen support"
619	depends on I2C
620	depends on GPIOLIB || COMPILE_TEST
621	help
622	  Say Y here if you have an I2C touchscreen using MStar msg2638.
623
624	  If unsure, say N.
625
626	  To compile this driver as a module, choose M here: the
627	  module will be called msg2638.
628
629config TOUCHSCREEN_MTOUCH
630	tristate "MicroTouch serial touchscreens"
631	select SERIO
632	help
633	  Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
634	  your system.
635
636	  If unsure, say N.
637
638	  To compile this driver as a module, choose M here: the
639	  module will be called mtouch.
640
641config TOUCHSCREEN_IMAGIS
642	tristate "Imagis touchscreen support"
643	depends on I2C
644	help
645	  Say Y here if you have an Imagis IST30xxC touchscreen.
646	  If unsure, say N.
647
648	  To compile this driver as a module, choose M here: the
649	  module will be called imagis.
650
651config TOUCHSCREEN_IMX6UL_TSC
652	tristate "Freescale i.MX6UL touchscreen controller"
653	depends on ((OF && GPIOLIB) || COMPILE_TEST) && HAS_IOMEM
654	help
655	  Say Y here if you have a Freescale i.MX6UL, and want to
656	  use the internal touchscreen controller.
657
658	  If unsure, say N.
659
660	  To compile this driver as a module, choose M here: the
661	  module will be called imx6ul_tsc.
662
663config TOUCHSCREEN_INEXIO
664	tristate "iNexio serial touchscreens"
665	select SERIO
666	help
667	  Say Y here if you have an iNexio serial touchscreen connected to
668	  your system.
669
670	  If unsure, say N.
671
672	  To compile this driver as a module, choose M here: the
673	  module will be called inexio.
674
675config TOUCHSCREEN_MK712
676	tristate "ICS MicroClock MK712 touchscreen"
677	help
678	  Say Y here if you have the ICS MicroClock MK712 touchscreen
679	  controller chip in your system.
680
681	  If unsure, say N.
682
683	  To compile this driver as a module, choose M here: the
684	  module will be called mk712.
685
686config TOUCHSCREEN_HP600
687	tristate "HP Jornada 6xx touchscreen"
688	depends on SH_HP6XX && SH_ADC
689	help
690	  Say Y here if you have a HP Jornada 620/660/680/690 and want to
691	  support the built-in touchscreen.
692
693	  To compile this driver as a module, choose M here: the
694	  module will be called hp680_ts_input.
695
696config TOUCHSCREEN_HP7XX
697	tristate "HP Jornada 7xx touchscreen"
698	depends on SA1100_JORNADA720_SSP
699	help
700	  Say Y here if you have a HP Jornada 710/720/728 and want
701	  to support the built-in touchscreen.
702
703	  To compile this driver as a module, choose M here: the
704	  module will be called jornada720_ts.
705
706config TOUCHSCREEN_IPAQ_MICRO
707	tristate "HP iPAQ Atmel Micro ASIC touchscreen"
708	depends on MFD_IPAQ_MICRO
709	help
710	  Say Y here to enable support for the touchscreen attached to
711	  the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
712
713	  If unsure, say N.
714
715	  To compile this driver as a module, choose M here: the
716	  module will be called ipaq-micro-ts.
717
718config TOUCHSCREEN_HTCPEN
719	tristate "HTC Shift X9500 touchscreen"
720	depends on ISA
721	help
722	  Say Y here if you have an HTC Shift UMPC also known as HTC X9500
723	  Clio / Shangrila and want to support the built-in touchscreen.
724
725	  If unsure, say N.
726
727	  To compile this driver as a module, choose M here: the
728	  module will be called htcpen.
729
730config TOUCHSCREEN_PENMOUNT
731	tristate "Penmount serial touchscreen"
732	select SERIO
733	help
734	  Say Y here if you have a Penmount serial touchscreen connected to
735	  your system.
736
737	  If unsure, say N.
738
739	  To compile this driver as a module, choose M here: the
740	  module will be called penmount.
741
742config TOUCHSCREEN_EDT_FT5X06
743	tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
744	depends on I2C
745	help
746	  Say Y here if you have an EDT "Polytouch" touchscreen based
747	  on the FocalTech FT5x06 family of controllers connected to
748	  your system.
749
750	  If unsure, say N.
751
752	  To compile this driver as a module, choose M here: the
753	  module will be called edt-ft5x06.
754
755config TOUCHSCREEN_RASPBERRYPI_FW
756	tristate "Raspberry Pi's firmware base touch screen support"
757	depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST)
758	help
759	  Say Y here if you have the official Raspberry Pi 7 inch screen on
760	  your system.
761
762	  If unsure, say N.
763
764	  To compile this driver as a module, choose M here: the
765	  module will be called raspberrypi-ts.
766
767config TOUCHSCREEN_MIGOR
768	tristate "Renesas MIGO-R touchscreen"
769	depends on (SH_MIGOR || COMPILE_TEST) && I2C
770	help
771	  Say Y here to enable MIGO-R touchscreen support.
772
773	  If unsure, say N.
774
775	  To compile this driver as a module, choose M here: the
776	  module will be called migor_ts.
777
778config TOUCHSCREEN_TOUCHRIGHT
779	tristate "Touchright serial touchscreen"
780	select SERIO
781	help
782	  Say Y here if you have a Touchright serial touchscreen connected to
783	  your system.
784
785	  If unsure, say N.
786
787	  To compile this driver as a module, choose M here: the
788	  module will be called touchright.
789
790config TOUCHSCREEN_TOUCHWIN
791	tristate "Touchwin serial touchscreen"
792	select SERIO
793	help
794	  Say Y here if you have a Touchwin serial touchscreen connected to
795	  your system.
796
797	  If unsure, say N.
798
799	  To compile this driver as a module, choose M here: the
800	  module will be called touchwin.
801
802config TOUCHSCREEN_TI_AM335X_TSC
803	tristate "TI Touchscreen Interface"
804	depends on MFD_TI_AM335X_TSCADC
805	help
806	  Say Y here if you have 4/5/8 wire touchscreen controller
807	  to be connected to the ADC controller on your TI AM335x SoC.
808
809	  If unsure, say N.
810
811	  To compile this driver as a module, choose M here: the
812	  module will be called ti_am335x_tsc.
813
814config TOUCHSCREEN_UCB1400
815	tristate "Philips UCB1400 touchscreen"
816	depends on AC97_BUS
817	depends on UCB1400_CORE
818	help
819	  This enables support for the Philips UCB1400 touchscreen interface.
820	  The UCB1400 is an AC97 audio codec.  The touchscreen interface
821	  will be initialized only after the ALSA subsystem has been
822	  brought up and the UCB1400 detected.  You therefore have to
823	  configure ALSA support as well (either built-in or modular,
824	  independently of whether this driver is itself built-in or
825	  modular) for this driver to work.
826
827	  To compile this driver as a module, choose M here: the
828	  module will be called ucb1400_ts.
829
830config TOUCHSCREEN_PIXCIR
831	tristate "PIXCIR I2C touchscreens"
832	depends on I2C
833	help
834	  Say Y here if you have a pixcir i2c touchscreen
835	  controller.
836
837	  If unsure, say N.
838
839	  To compile this driver as a module, choose M here: the
840	  module will be called pixcir_i2c_ts.
841
842config TOUCHSCREEN_WDT87XX_I2C
843	tristate "Weida HiTech I2C touchscreen"
844	depends on I2C
845	help
846	  Say Y here if you have a Weida WDT87XX I2C touchscreen
847	  connected to your system.
848
849	  If unsure, say N.
850
851	  To compile this driver as a module, choose M here: the
852	  module will be called wdt87xx_i2c.
853
854config TOUCHSCREEN_WM831X
855	tristate "Support for WM831x touchscreen controllers"
856	depends on MFD_WM831X
857	help
858	  This enables support for the touchscreen controller on the WM831x
859	  series of PMICs.
860
861	  To compile this driver as a module, choose M here: the
862	  module will be called wm831x-ts.
863
864config TOUCHSCREEN_WM97XX
865	tristate "Support for WM97xx AC97 touchscreen controllers"
866	depends on AC97_BUS || AC97_BUS_NEW
867	help
868	  Say Y here if you have a Wolfson Microelectronics WM97xx
869	  touchscreen connected to your system. Note that this option
870	  only enables core driver, you will also need to select
871	  support for appropriate chip below.
872
873	  If unsure, say N.
874
875	  To compile this driver as a module, choose M here: the
876	  module will be called wm97xx-ts.
877
878config TOUCHSCREEN_WM9705
879	bool "WM9705 Touchscreen interface support"
880	depends on TOUCHSCREEN_WM97XX
881	default y
882	help
883	  Say Y here to enable support for the Wolfson Microelectronics
884	  WM9705 touchscreen controller.
885
886config TOUCHSCREEN_WM9712
887	bool "WM9712 Touchscreen interface support"
888	depends on TOUCHSCREEN_WM97XX
889	default y
890	help
891	  Say Y here to enable support for the Wolfson Microelectronics
892	  WM9712 touchscreen controller.
893
894config TOUCHSCREEN_WM9713
895	bool "WM9713 Touchscreen interface support"
896	depends on TOUCHSCREEN_WM97XX
897	default y
898	help
899	  Say Y here to enable support for the Wolfson Microelectronics
900	  WM9713 touchscreen controller.
901
902config TOUCHSCREEN_WM97XX_MAINSTONE
903	tristate "WM97xx Mainstone/Palm accelerated touch"
904	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
905	depends on SND_PXA2XX_LIB_AC97
906	help
907	  Say Y here for support for streaming mode with WM97xx touchscreens
908	  on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
909
910	  If unsure, say N.
911
912	  To compile this driver as a module, choose M here: the
913	  module will be called mainstone-wm97xx.
914
915config TOUCHSCREEN_WM97XX_ZYLONITE
916	tristate "Zylonite accelerated touch"
917	depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
918	depends on SND_PXA2XX_LIB_AC97
919	select TOUCHSCREEN_WM9713
920	help
921	  Say Y here for support for streaming mode with the touchscreen
922	  on Zylonite systems.
923
924	  If unsure, say N.
925
926	  To compile this driver as a module, choose M here: the
927	  module will be called zylonite-wm97xx.
928
929config TOUCHSCREEN_USB_COMPOSITE
930	tristate "USB Touchscreen Driver"
931	depends on USB_ARCH_HAS_HCD
932	select USB
933	help
934	  USB Touchscreen driver for:
935	  - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
936	  - PanJit TouchSet USB
937	  - 3M MicroTouch USB (EX II series)
938	  - ITM
939	  - some other eTurboTouch
940	  - Gunze AHL61
941	  - DMC TSC-10/25
942	  - IRTOUCHSYSTEMS/UNITOP
943	  - IdealTEK URTC1000
944	  - GoTop Super_Q2/GogoPen/PenPower tablets
945	  - JASTEC USB Touch Controller/DigiTech DTR-02U
946	  - Zytronic controllers
947	  - Elo TouchSystems 2700 IntelliTouch
948	  - EasyTouch USB Touch Controller from Data Module
949	  - e2i (Mimo monitors)
950
951	  Have a look at <http://linux.chapter7.ch/touchkit/> for
952	  a usage description and the required user-space stuff.
953
954	  To compile this driver as a module, choose M here: the
955	  module will be called usbtouchscreen.
956
957config TOUCHSCREEN_MXS_LRADC
958	tristate "Freescale i.MX23/i.MX28 LRADC touchscreen"
959	depends on MFD_MXS_LRADC
960	help
961	  Say Y here if you have a touchscreen connected to the low-resolution
962	  analog-to-digital converter (LRADC) on an i.MX23 or i.MX28 processor.
963
964	  To compile this driver as a module, choose M here: the module will be
965	  called mxs-lradc-ts.
966
967config TOUCHSCREEN_MX25
968	tristate "Freescale i.MX25 touchscreen input driver"
969	depends on MFD_MX25_TSADC
970	help
971	  Enable support for touchscreen connected to your i.MX25.
972
973	  To compile this driver as a module, choose M here: the
974	  module will be called fsl-imx25-tcq.
975
976config TOUCHSCREEN_MC13783
977	tristate "Freescale MC13783 touchscreen input driver"
978	depends on MFD_MC13XXX
979	help
980	  Say Y here if you have an Freescale MC13783 PMIC on your
981	  board and want to use its touchscreen
982
983	  If unsure, say N.
984
985	  To compile this driver as a module, choose M here: the
986	  module will be called mc13783_ts.
987
988config TOUCHSCREEN_USB_EGALAX
989	default y
990	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
991	depends on TOUCHSCREEN_USB_COMPOSITE
992
993config TOUCHSCREEN_USB_PANJIT
994	default y
995	bool "PanJit device support" if EXPERT
996	depends on TOUCHSCREEN_USB_COMPOSITE
997
998config TOUCHSCREEN_USB_3M
999	default y
1000	bool "3M/Microtouch EX II series device support" if EXPERT
1001	depends on TOUCHSCREEN_USB_COMPOSITE
1002
1003config TOUCHSCREEN_USB_ITM
1004	default y
1005	bool "ITM device support" if EXPERT
1006	depends on TOUCHSCREEN_USB_COMPOSITE
1007
1008config TOUCHSCREEN_USB_ETURBO
1009	default y
1010	bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
1011	depends on TOUCHSCREEN_USB_COMPOSITE
1012
1013config TOUCHSCREEN_USB_GUNZE
1014	default y
1015	bool "Gunze AHL61 device support" if EXPERT
1016	depends on TOUCHSCREEN_USB_COMPOSITE
1017
1018config TOUCHSCREEN_USB_DMC_TSC10
1019	default y
1020	bool "DMC TSC-10/25 device support" if EXPERT
1021	depends on TOUCHSCREEN_USB_COMPOSITE
1022
1023config TOUCHSCREEN_USB_IRTOUCH
1024	default y
1025	bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
1026	depends on TOUCHSCREEN_USB_COMPOSITE
1027
1028config TOUCHSCREEN_USB_IDEALTEK
1029	default y
1030	bool "IdealTEK URTC1000 device support" if EXPERT
1031	depends on TOUCHSCREEN_USB_COMPOSITE
1032
1033config TOUCHSCREEN_USB_GENERAL_TOUCH
1034	default y
1035	bool "GeneralTouch Touchscreen device support" if EXPERT
1036	depends on TOUCHSCREEN_USB_COMPOSITE
1037
1038config TOUCHSCREEN_USB_GOTOP
1039	default y
1040	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
1041	depends on TOUCHSCREEN_USB_COMPOSITE
1042
1043config TOUCHSCREEN_USB_JASTEC
1044	default y
1045	bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
1046	depends on TOUCHSCREEN_USB_COMPOSITE
1047
1048config TOUCHSCREEN_USB_ELO
1049	default y
1050	bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
1051	depends on TOUCHSCREEN_USB_COMPOSITE
1052
1053config TOUCHSCREEN_USB_E2I
1054	default y
1055	bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
1056	depends on TOUCHSCREEN_USB_COMPOSITE
1057
1058config TOUCHSCREEN_USB_ZYTRONIC
1059	default y
1060	bool "Zytronic controller" if EXPERT
1061	depends on TOUCHSCREEN_USB_COMPOSITE
1062
1063config TOUCHSCREEN_USB_ETT_TC45USB
1064	default y
1065	bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
1066	depends on TOUCHSCREEN_USB_COMPOSITE
1067
1068config TOUCHSCREEN_USB_NEXIO
1069	default y
1070	bool "NEXIO/iNexio device support" if EXPERT
1071	depends on TOUCHSCREEN_USB_COMPOSITE
1072
1073config TOUCHSCREEN_USB_EASYTOUCH
1074	default y
1075	bool "EasyTouch USB Touch controller device support" if EXPERT
1076	depends on TOUCHSCREEN_USB_COMPOSITE
1077	help
1078	  Say Y here if you have an EasyTouch USB Touch controller.
1079	  If unsure, say N.
1080
1081config TOUCHSCREEN_TOUCHIT213
1082	tristate "Sahara TouchIT-213 touchscreen"
1083	select SERIO
1084	help
1085	  Say Y here if you have a Sahara TouchIT-213 Tablet PC.
1086
1087	  If unsure, say N.
1088
1089	  To compile this driver as a module, choose M here: the
1090	  module will be called touchit213.
1091
1092config TOUCHSCREEN_TS4800
1093	tristate "TS-4800 touchscreen"
1094	depends on HAS_IOMEM && OF
1095	depends on SOC_IMX51 || COMPILE_TEST
1096	select MFD_SYSCON
1097	help
1098	  Say Y here if you have a touchscreen on a TS-4800 board.
1099
1100	  On TS-4800, the touchscreen is not handled directly by Linux but by
1101	  a companion FPGA.
1102
1103	  If unsure, say N.
1104
1105	  To compile this driver as a module, choose M here: the
1106	  module will be called ts4800_ts.
1107
1108config TOUCHSCREEN_TSC_SERIO
1109	tristate "TSC-10/25/40 serial touchscreen support"
1110	select SERIO
1111	help
1112	  Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
1113	  to your system.
1114
1115	  If unsure, say N.
1116
1117	  To compile this driver as a module, choose M here: the
1118	  module will be called tsc40.
1119
1120config TOUCHSCREEN_TSC200X_CORE
1121	tristate
1122
1123config TOUCHSCREEN_TSC2004
1124	tristate "TSC2004 based touchscreens"
1125	depends on I2C
1126	select REGMAP_I2C
1127	select TOUCHSCREEN_TSC200X_CORE
1128	help
1129	  Say Y here if you have a TSC2004 based touchscreen.
1130
1131	  If unsure, say N.
1132
1133	  To compile this driver as a module, choose M here: the
1134	  module will be called tsc2004.
1135
1136config TOUCHSCREEN_TSC2005
1137	tristate "TSC2005 based touchscreens"
1138	depends on SPI_MASTER
1139	select REGMAP_SPI
1140	select TOUCHSCREEN_TSC200X_CORE
1141	help
1142	  Say Y here if you have a TSC2005 based touchscreen.
1143
1144	  If unsure, say N.
1145
1146	  To compile this driver as a module, choose M here: the
1147	  module will be called tsc2005.
1148
1149config TOUCHSCREEN_TSC2007
1150	tristate "TSC2007 based touchscreens"
1151	depends on I2C
1152	help
1153	  Say Y here if you have a TSC2007 based touchscreen.
1154
1155	  If unsure, say N.
1156
1157	  To compile this driver as a module, choose M here: the
1158	  module will be called tsc2007.
1159
1160config TOUCHSCREEN_TSC2007_IIO
1161	bool "IIO interface for external ADC input and temperature"
1162	depends on TOUCHSCREEN_TSC2007
1163	depends on IIO=y || IIO=TOUCHSCREEN_TSC2007
1164	help
1165	  Saying Y here adds an iio interface to the tsc2007 which
1166	  provides values for the AUX input (used for e.g. battery
1167	  or ambient light monitoring), temperature and raw input
1168	  values.
1169
1170config TOUCHSCREEN_PCAP
1171	tristate "Motorola PCAP touchscreen"
1172	depends on EZX_PCAP
1173	help
1174	  Say Y here if you have a Motorola EZX telephone and
1175	  want to enable support for the built-in touchscreen.
1176
1177	  To compile this driver as a module, choose M here: the
1178	  module will be called pcap_ts.
1179
1180config TOUCHSCREEN_RM_TS
1181	tristate "Raydium I2C Touchscreen"
1182	depends on I2C
1183	depends on GPIOLIB || COMPILE_TEST
1184	help
1185	  Say Y here if you have Raydium series I2C touchscreen,
1186	  such as RM32380, connected to your system.
1187
1188	  If unsure, say N.
1189
1190	  To compile this driver as a module, choose M here: the
1191	  module will be called raydium_i2c_ts.
1192
1193config TOUCHSCREEN_SILEAD
1194	tristate "Silead I2C touchscreen"
1195	depends on I2C
1196	help
1197	  Say Y here if you have the Silead touchscreen connected to
1198	  your system.
1199
1200	  If unsure, say N.
1201
1202	  To compile this driver as a module, choose M here: the
1203	  module will be called silead.
1204
1205config TOUCHSCREEN_SIS_I2C
1206	tristate "SiS 9200 family I2C touchscreen"
1207	depends on I2C
1208	select CRC_ITU_T
1209	depends on GPIOLIB || COMPILE_TEST
1210	help
1211	  This enables support for SiS 9200 family over I2C based touchscreens.
1212
1213	  If unsure, say N.
1214
1215	  To compile this driver as a module, choose M here: the
1216	  module will be called sis_i2c.
1217
1218config TOUCHSCREEN_ST1232
1219	tristate "Sitronix ST1232 or ST1633 touchscreen controllers"
1220	depends on I2C
1221	help
1222	  Say Y here if you want to support the Sitronix ST1232
1223	  or ST1633 touchscreen controller.
1224
1225	  If unsure, say N.
1226
1227	  To compile this driver as a module, choose M here: the
1228	  module will be called st1232_ts.
1229
1230config TOUCHSCREEN_STMFTS
1231	tristate "STMicroelectronics STMFTS touchscreen"
1232	depends on I2C
1233	depends on LEDS_CLASS
1234	help
1235	  Say Y here if you want support for STMicroelectronics
1236	  STMFTS touchscreen.
1237
1238	  To compile this driver as a module, choose M here: the
1239	  module will be called stmfts.
1240
1241config TOUCHSCREEN_STMPE
1242	tristate "STMicroelectronics STMPE touchscreens"
1243	depends on MFD_STMPE
1244	depends on (OF || COMPILE_TEST)
1245	help
1246	  Say Y here if you want support for STMicroelectronics
1247	  STMPE touchscreen controllers.
1248
1249	  To compile this driver as a module, choose M here: the
1250	  module will be called stmpe-ts.
1251
1252config TOUCHSCREEN_SUN4I
1253	tristate "Allwinner sun4i resistive touchscreen controller support"
1254	depends on ARCH_SUNXI || COMPILE_TEST
1255	depends on HWMON
1256	depends on THERMAL || !THERMAL_OF
1257	help
1258	  This selects support for the resistive touchscreen controller
1259	  found on Allwinner sunxi SoCs.
1260
1261	  To compile this driver as a module, choose M here: the
1262	  module will be called sun4i-ts.
1263
1264config TOUCHSCREEN_SUR40
1265	tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1266	depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1267	depends on VIDEO_DEV
1268	select VIDEOBUF2_DMA_SG
1269	help
1270	  Say Y here if you want support for the Samsung SUR40 touchscreen
1271	  (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1272
1273	  To compile this driver as a module, choose M here: the
1274	  module will be called sur40.
1275
1276config TOUCHSCREEN_SURFACE3_SPI
1277	tristate "Ntrig/Microsoft Surface 3 SPI touchscreen"
1278	depends on SPI
1279	depends on GPIOLIB || COMPILE_TEST
1280	help
1281	  Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1282	  controller chip as found on the Surface 3 in your system.
1283
1284	  If unsure, say N.
1285
1286	  To compile this driver as a module, choose M here: the
1287	  module will be called surface3_spi.
1288
1289config TOUCHSCREEN_SX8654
1290	tristate "Semtech SX8654 touchscreen"
1291	depends on I2C
1292	help
1293	  Say Y here if you have a Semtech SX8654 touchscreen controller.
1294
1295	  If unsure, say N
1296
1297	  To compile this driver as a module, choose M here: the
1298	  module will be called sx8654.
1299
1300config TOUCHSCREEN_TPS6507X
1301	tristate "TPS6507x based touchscreens"
1302	depends on I2C
1303	help
1304	  Say Y here if you have a TPS6507x based touchscreen
1305	  controller.
1306
1307	  If unsure, say N.
1308
1309	  To compile this driver as a module, choose M here: the
1310	  module will be called tps6507x_ts.
1311
1312config TOUCHSCREEN_ZET6223
1313	tristate "Zeitec ZET6223 touchscreen driver"
1314	depends on I2C
1315	help
1316	  Say Y here if you have a touchscreen using Zeitec ZET6223
1317
1318	  If unsure, say N.
1319
1320	  To compile this driver as a module, choose M here: the
1321	  module will be called zet6223.
1322
1323config TOUCHSCREEN_ZFORCE
1324	tristate "Neonode zForce infrared touchscreens"
1325	depends on I2C
1326	depends on GPIOLIB || COMPILE_TEST
1327	help
1328	  Say Y here if you have a touchscreen using the zforce
1329	  infraread technology from Neonode.
1330
1331	  If unsure, say N.
1332
1333	  To compile this driver as a module, choose M here: the
1334	  module will be called zforce_ts.
1335
1336config TOUCHSCREEN_COLIBRI_VF50
1337	tristate "Toradex Colibri on board touchscreen driver"
1338	depends on IIO && VF610_ADC
1339	depends on GPIOLIB || COMPILE_TEST
1340	help
1341	  Say Y here if you have a Colibri VF50 and plan to use
1342	  the on-board provided 4-wire touchscreen driver.
1343
1344	  If unsure, say N.
1345
1346	  To compile this driver as a module, choose M here: the
1347	  module will be called colibri_vf50_ts.
1348
1349config TOUCHSCREEN_ROHM_BU21023
1350	tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1351	depends on I2C
1352	help
1353	  Say Y here if you have a touchscreen using ROHM BU21023/24.
1354
1355	  If unsure, say N.
1356
1357	  To compile this driver as a module, choose M here: the
1358	  module will be called bu21023_ts.
1359
1360config TOUCHSCREEN_IQS5XX
1361	tristate "Azoteq IQS550/572/525 trackpad/touchscreen controller"
1362	depends on I2C
1363	help
1364	  Say Y to enable support for the Azoteq IQS550/572/525
1365	  family of trackpad/touchscreen controllers.
1366
1367	  To compile this driver as a module, choose M here: the
1368	  module will be called iqs5xx.
1369
1370config TOUCHSCREEN_ZINITIX
1371	tristate "Zinitix touchscreen support"
1372	depends on I2C
1373	help
1374	  Say Y here if you have a touchscreen using Zinitix bt541,
1375	  or something similar enough.
1376
1377	  If unsure, say N.
1378
1379	  To compile this driver as a module, choose M here: the
1380	  module will be called zinitix.
1381
1382endif
1383