1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Wacom protocol 4 serial tablet driver 4 * 5 * Copyright 2014 Hans de Goede <hdegoede@redhat.com> 6 * Copyright 2011-2012 Julian Squires <julian@cipht.net> 7 * 8 * Many thanks to Bill Seremetis, without whom PenPartner support 9 * would not have been possible. Thanks to Patrick Mahoney. 10 * 11 * This driver was developed with reference to much code written by others, 12 * particularly: 13 * - elo, gunze drivers by Vojtech Pavlik <vojtech@ucw.cz>; 14 * - wacom_w8001 driver by Jaya Kumar <jayakumar.lkml@gmail.com>; 15 * - the USB wacom input driver, credited to many people 16 * (see drivers/input/tablet/wacom.h); 17 * - new and old versions of linuxwacom / xf86-input-wacom credited to 18 * Frederic Lepied, France. <Lepied@XFree86.org> and 19 * Ping Cheng, Wacom. <pingc@wacom.com>; 20 * - and xf86wacom.c (a presumably ancient version of the linuxwacom code), 21 * by Frederic Lepied and Raph Levien <raph@gtk.org>. 22 * 23 * To do: 24 * - support pad buttons; (requires access to a model with pad buttons) 25 * - support (protocol 4-style) tilt (requires access to a > 1.4 rom model) 26 */ 27 28 /* 29 * Wacom serial protocol 4 documentation taken from linuxwacom-0.9.9 code, 30 * protocol 4 uses 7 or 9 byte of data in the following format: 31 * 32 * Byte 1 33 * bit 7 Sync bit always 1 34 * bit 6 Pointing device detected 35 * bit 5 Cursor = 0 / Stylus = 1 36 * bit 4 Reserved 37 * bit 3 1 if a button on the pointing device has been pressed 38 * bit 2 P0 (optional) 39 * bit 1 X15 40 * bit 0 X14 41 * 42 * Byte 2 43 * bit 7 Always 0 44 * bits 6-0 = X13 - X7 45 * 46 * Byte 3 47 * bit 7 Always 0 48 * bits 6-0 = X6 - X0 49 * 50 * Byte 4 51 * bit 7 Always 0 52 * bit 6 B3 53 * bit 5 B2 54 * bit 4 B1 55 * bit 3 B0 56 * bit 2 P1 (optional) 57 * bit 1 Y15 58 * bit 0 Y14 59 * 60 * Byte 5 61 * bit 7 Always 0 62 * bits 6-0 = Y13 - Y7 63 * 64 * Byte 6 65 * bit 7 Always 0 66 * bits 6-0 = Y6 - Y0 67 * 68 * Byte 7 69 * bit 7 Always 0 70 * bit 6 Sign of pressure data; or wheel-rel for cursor tool 71 * bit 5 P7; or REL1 for cursor tool 72 * bit 4 P6; or REL0 for cursor tool 73 * bit 3 P5 74 * bit 2 P4 75 * bit 1 P3 76 * bit 0 P2 77 * 78 * byte 8 and 9 are optional and present only 79 * in tilt mode. 80 * 81 * Byte 8 82 * bit 7 Always 0 83 * bit 6 Sign of tilt X 84 * bit 5 Xt6 85 * bit 4 Xt5 86 * bit 3 Xt4 87 * bit 2 Xt3 88 * bit 1 Xt2 89 * bit 0 Xt1 90 * 91 * Byte 9 92 * bit 7 Always 0 93 * bit 6 Sign of tilt Y 94 * bit 5 Yt6 95 * bit 4 Yt5 96 * bit 3 Yt4 97 * bit 2 Yt3 98 * bit 1 Yt2 99 * bit 0 Yt1 100 */ 101 102 #include <linux/completion.h> 103 #include <linux/init.h> 104 #include <linux/input.h> 105 #include <linux/interrupt.h> 106 #include <linux/kernel.h> 107 #include <linux/module.h> 108 #include <linux/serio.h> 109 #include <linux/slab.h> 110 #include <linux/string.h> 111 112 MODULE_AUTHOR("Julian Squires <julian@cipht.net>, Hans de Goede <hdegoede@redhat.com>"); 113 MODULE_DESCRIPTION("Wacom protocol 4 serial tablet driver"); 114 MODULE_LICENSE("GPL"); 115 116 #define REQUEST_MODEL_AND_ROM_VERSION "~#" 117 #define REQUEST_MAX_COORDINATES "~C\r" 118 #define REQUEST_CONFIGURATION_STRING "~R\r" 119 #define REQUEST_RESET_TO_PROTOCOL_IV "\r#" 120 /* 121 * Note: sending "\r$\r" causes at least the Digitizer II to send 122 * packets in ASCII instead of binary. "\r#" seems to undo that. 123 */ 124 125 #define COMMAND_START_SENDING_PACKETS "ST\r" 126 #define COMMAND_STOP_SENDING_PACKETS "SP\r" 127 #define COMMAND_MULTI_MODE_INPUT "MU1\r" 128 #define COMMAND_ORIGIN_IN_UPPER_LEFT "OC1\r" 129 #define COMMAND_ENABLE_ALL_MACRO_BUTTONS "~M0\r" 130 #define COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS "~M1\r" 131 #define COMMAND_TRANSMIT_AT_MAX_RATE "IT0\r" 132 #define COMMAND_DISABLE_INCREMENTAL_MODE "IN0\r" 133 #define COMMAND_ENABLE_CONTINUOUS_MODE "SR\r" 134 #define COMMAND_ENABLE_PRESSURE_MODE "PH1\r" 135 #define COMMAND_Z_FILTER "ZF1\r" 136 137 /* Note that this is a protocol 4 packet without tilt information. */ 138 #define PACKET_LENGTH 7 139 #define DATA_SIZE 32 140 141 /* flags */ 142 #define F_COVERS_SCREEN 0x01 143 #define F_HAS_STYLUS2 0x02 144 #define F_HAS_SCROLLWHEEL 0x04 145 146 /* device IDs */ 147 #define STYLUS_DEVICE_ID 0x02 148 #define CURSOR_DEVICE_ID 0x06 149 #define ERASER_DEVICE_ID 0x0A 150 151 enum { STYLUS = 1, ERASER, CURSOR }; 152 153 static const struct { 154 int device_id; 155 int input_id; 156 } tools[] = { 157 { 0, 0 }, 158 { STYLUS_DEVICE_ID, BTN_TOOL_PEN }, 159 { ERASER_DEVICE_ID, BTN_TOOL_RUBBER }, 160 { CURSOR_DEVICE_ID, BTN_TOOL_MOUSE }, 161 }; 162 163 struct wacom { 164 struct input_dev *dev; 165 struct completion cmd_done; 166 int result; 167 u8 expect; 168 u8 eraser_mask; 169 unsigned int extra_z_bits; 170 unsigned int flags; 171 unsigned int res_x, res_y; 172 unsigned int max_x, max_y; 173 unsigned int tool; 174 unsigned int idx; 175 u8 data[DATA_SIZE]; 176 char phys[32]; 177 }; 178 179 enum { 180 MODEL_CINTIQ = 0x504C, /* PL */ 181 MODEL_CINTIQ2 = 0x4454, /* DT */ 182 MODEL_DIGITIZER_II = 0x5544, /* UD */ 183 MODEL_GRAPHIRE = 0x4554, /* ET */ 184 MODEL_PENPARTNER = 0x4354, /* CT */ 185 MODEL_ARTPAD_II = 0x4B54, /* KT */ 186 }; 187 188 static void wacom_handle_model_response(struct wacom *wacom) 189 { 190 int major_v, minor_v, r = 0; 191 char *p; 192 193 p = strrchr(wacom->data, 'V'); 194 if (p) 195 r = sscanf(p + 1, "%u.%u", &major_v, &minor_v); 196 if (r != 2) 197 major_v = minor_v = 0; 198 199 switch (wacom->data[2] << 8 | wacom->data[3]) { 200 case MODEL_CINTIQ: /* UNTESTED */ 201 case MODEL_CINTIQ2: 202 if ((wacom->data[2] << 8 | wacom->data[3]) == MODEL_CINTIQ) { 203 wacom->dev->name = "Wacom Cintiq"; 204 wacom->dev->id.version = MODEL_CINTIQ; 205 } else { 206 wacom->dev->name = "Wacom Cintiq II"; 207 wacom->dev->id.version = MODEL_CINTIQ2; 208 } 209 wacom->res_x = 508; 210 wacom->res_y = 508; 211 212 switch (wacom->data[5] << 8 | wacom->data[6]) { 213 case 0x3731: /* PL-710 */ 214 wacom->res_x = 2540; 215 wacom->res_y = 2540; 216 /* fall through */ 217 case 0x3535: /* PL-550 */ 218 case 0x3830: /* PL-800 */ 219 wacom->extra_z_bits = 2; 220 } 221 222 wacom->flags = F_COVERS_SCREEN; 223 break; 224 225 case MODEL_PENPARTNER: 226 wacom->dev->name = "Wacom Penpartner"; 227 wacom->dev->id.version = MODEL_PENPARTNER; 228 wacom->res_x = 1000; 229 wacom->res_y = 1000; 230 break; 231 232 case MODEL_GRAPHIRE: 233 wacom->dev->name = "Wacom Graphire"; 234 wacom->dev->id.version = MODEL_GRAPHIRE; 235 wacom->res_x = 1016; 236 wacom->res_y = 1016; 237 wacom->max_x = 5103; 238 wacom->max_y = 3711; 239 wacom->extra_z_bits = 2; 240 wacom->eraser_mask = 0x08; 241 wacom->flags = F_HAS_STYLUS2 | F_HAS_SCROLLWHEEL; 242 break; 243 244 case MODEL_ARTPAD_II: 245 case MODEL_DIGITIZER_II: 246 wacom->dev->name = "Wacom Digitizer II"; 247 wacom->dev->id.version = MODEL_DIGITIZER_II; 248 if (major_v == 1 && minor_v <= 2) 249 wacom->extra_z_bits = 0; /* UNTESTED */ 250 break; 251 252 default: 253 dev_err(&wacom->dev->dev, "Unsupported Wacom model %s\n", 254 wacom->data); 255 wacom->result = -ENODEV; 256 return; 257 } 258 259 dev_info(&wacom->dev->dev, "%s tablet, version %u.%u\n", 260 wacom->dev->name, major_v, minor_v); 261 } 262 263 static void wacom_handle_configuration_response(struct wacom *wacom) 264 { 265 int r, skip; 266 267 dev_dbg(&wacom->dev->dev, "Configuration string: %s\n", wacom->data); 268 r = sscanf(wacom->data, "~R%x,%u,%u,%u,%u", &skip, &skip, &skip, 269 &wacom->res_x, &wacom->res_y); 270 if (r != 5) 271 dev_warn(&wacom->dev->dev, "could not get resolution\n"); 272 } 273 274 static void wacom_handle_coordinates_response(struct wacom *wacom) 275 { 276 int r; 277 278 dev_dbg(&wacom->dev->dev, "Coordinates string: %s\n", wacom->data); 279 r = sscanf(wacom->data, "~C%u,%u", &wacom->max_x, &wacom->max_y); 280 if (r != 2) 281 dev_warn(&wacom->dev->dev, "could not get max coordinates\n"); 282 } 283 284 static void wacom_handle_response(struct wacom *wacom) 285 { 286 if (wacom->data[0] != '~' || wacom->data[1] != wacom->expect) { 287 dev_err(&wacom->dev->dev, 288 "Wacom got an unexpected response: %s\n", wacom->data); 289 wacom->result = -EIO; 290 } else { 291 wacom->result = 0; 292 293 switch (wacom->data[1]) { 294 case '#': 295 wacom_handle_model_response(wacom); 296 break; 297 case 'R': 298 wacom_handle_configuration_response(wacom); 299 break; 300 case 'C': 301 wacom_handle_coordinates_response(wacom); 302 break; 303 } 304 } 305 306 complete(&wacom->cmd_done); 307 } 308 309 static void wacom_handle_packet(struct wacom *wacom) 310 { 311 u8 in_proximity_p, stylus_p, button; 312 unsigned int tool; 313 int x, y, z; 314 315 in_proximity_p = wacom->data[0] & 0x40; 316 stylus_p = wacom->data[0] & 0x20; 317 button = (wacom->data[3] & 0x78) >> 3; 318 x = (wacom->data[0] & 3) << 14 | wacom->data[1]<<7 | wacom->data[2]; 319 y = (wacom->data[3] & 3) << 14 | wacom->data[4]<<7 | wacom->data[5]; 320 321 if (in_proximity_p && stylus_p) { 322 z = wacom->data[6] & 0x7f; 323 if (wacom->extra_z_bits >= 1) 324 z = z << 1 | (wacom->data[3] & 0x4) >> 2; 325 if (wacom->extra_z_bits > 1) 326 z = z << 1 | (wacom->data[0] & 0x4) >> 2; 327 z = z ^ (0x40 << wacom->extra_z_bits); 328 } else { 329 z = -1; 330 } 331 332 if (stylus_p) 333 tool = (button & wacom->eraser_mask) ? ERASER : STYLUS; 334 else 335 tool = CURSOR; 336 337 if (tool != wacom->tool && wacom->tool != 0) { 338 input_report_key(wacom->dev, tools[wacom->tool].input_id, 0); 339 input_sync(wacom->dev); 340 } 341 wacom->tool = tool; 342 343 input_report_key(wacom->dev, tools[tool].input_id, in_proximity_p); 344 input_report_abs(wacom->dev, ABS_MISC, 345 in_proximity_p ? tools[tool].device_id : 0); 346 input_report_abs(wacom->dev, ABS_X, x); 347 input_report_abs(wacom->dev, ABS_Y, y); 348 input_report_abs(wacom->dev, ABS_PRESSURE, z); 349 if (stylus_p) { 350 input_report_key(wacom->dev, BTN_TOUCH, button & 1); 351 input_report_key(wacom->dev, BTN_STYLUS, button & 2); 352 input_report_key(wacom->dev, BTN_STYLUS2, button & 4); 353 } else { 354 input_report_key(wacom->dev, BTN_LEFT, button & 1); 355 input_report_key(wacom->dev, BTN_RIGHT, button & 2); 356 input_report_key(wacom->dev, BTN_MIDDLE, button & 4); 357 /* handle relative wheel for non-stylus device */ 358 z = (wacom->data[6] & 0x30) >> 4; 359 if (wacom->data[6] & 0x40) 360 z = -z; 361 input_report_rel(wacom->dev, REL_WHEEL, z); 362 } 363 input_sync(wacom->dev); 364 } 365 366 static void wacom_clear_data_buf(struct wacom *wacom) 367 { 368 memset(wacom->data, 0, DATA_SIZE); 369 wacom->idx = 0; 370 } 371 372 static irqreturn_t wacom_interrupt(struct serio *serio, unsigned char data, 373 unsigned int flags) 374 { 375 struct wacom *wacom = serio_get_drvdata(serio); 376 377 if (data & 0x80) 378 wacom->idx = 0; 379 380 /* 381 * We're either expecting a carriage return-terminated ASCII 382 * response string, or a seven-byte packet with the MSB set on 383 * the first byte. 384 * 385 * Note however that some tablets (the PenPartner, for 386 * example) don't send a carriage return at the end of a 387 * command. We handle these by waiting for timeout. 388 */ 389 if (data == '\r' && !(wacom->data[0] & 0x80)) { 390 wacom_handle_response(wacom); 391 wacom_clear_data_buf(wacom); 392 return IRQ_HANDLED; 393 } 394 395 /* Leave place for 0 termination */ 396 if (wacom->idx > (DATA_SIZE - 2)) { 397 dev_dbg(&wacom->dev->dev, 398 "throwing away %d bytes of garbage\n", wacom->idx); 399 wacom_clear_data_buf(wacom); 400 } 401 wacom->data[wacom->idx++] = data; 402 403 if (wacom->idx == PACKET_LENGTH && (wacom->data[0] & 0x80)) { 404 wacom_handle_packet(wacom); 405 wacom_clear_data_buf(wacom); 406 } 407 408 return IRQ_HANDLED; 409 } 410 411 static void wacom_disconnect(struct serio *serio) 412 { 413 struct wacom *wacom = serio_get_drvdata(serio); 414 415 serio_close(serio); 416 serio_set_drvdata(serio, NULL); 417 input_unregister_device(wacom->dev); 418 kfree(wacom); 419 } 420 421 static int wacom_send(struct serio *serio, const u8 *command) 422 { 423 int err = 0; 424 425 for (; !err && *command; command++) 426 err = serio_write(serio, *command); 427 428 return err; 429 } 430 431 static int wacom_send_setup_string(struct wacom *wacom, struct serio *serio) 432 { 433 const u8 *cmd; 434 435 switch (wacom->dev->id.version) { 436 case MODEL_CINTIQ: /* UNTESTED */ 437 cmd = COMMAND_ORIGIN_IN_UPPER_LEFT 438 COMMAND_TRANSMIT_AT_MAX_RATE 439 COMMAND_ENABLE_CONTINUOUS_MODE 440 COMMAND_START_SENDING_PACKETS; 441 break; 442 443 case MODEL_PENPARTNER: 444 cmd = COMMAND_ENABLE_PRESSURE_MODE 445 COMMAND_START_SENDING_PACKETS; 446 break; 447 448 default: 449 cmd = COMMAND_MULTI_MODE_INPUT 450 COMMAND_ORIGIN_IN_UPPER_LEFT 451 COMMAND_ENABLE_ALL_MACRO_BUTTONS 452 COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS 453 COMMAND_TRANSMIT_AT_MAX_RATE 454 COMMAND_DISABLE_INCREMENTAL_MODE 455 COMMAND_ENABLE_CONTINUOUS_MODE 456 COMMAND_Z_FILTER 457 COMMAND_START_SENDING_PACKETS; 458 break; 459 } 460 461 return wacom_send(serio, cmd); 462 } 463 464 static int wacom_send_and_wait(struct wacom *wacom, struct serio *serio, 465 const u8 *cmd, const char *desc) 466 { 467 int err; 468 unsigned long u; 469 470 wacom->expect = cmd[1]; 471 init_completion(&wacom->cmd_done); 472 473 err = wacom_send(serio, cmd); 474 if (err) 475 return err; 476 477 u = wait_for_completion_timeout(&wacom->cmd_done, HZ); 478 if (u == 0) { 479 /* Timeout, process what we've received. */ 480 wacom_handle_response(wacom); 481 } 482 483 wacom->expect = 0; 484 return wacom->result; 485 } 486 487 static int wacom_setup(struct wacom *wacom, struct serio *serio) 488 { 489 int err; 490 491 /* Note that setting the link speed is the job of inputattach. 492 * We assume that reset negotiation has already happened, 493 * here. */ 494 err = wacom_send_and_wait(wacom, serio, REQUEST_MODEL_AND_ROM_VERSION, 495 "model and version"); 496 if (err) 497 return err; 498 499 if (!(wacom->res_x && wacom->res_y)) { 500 err = wacom_send_and_wait(wacom, serio, 501 REQUEST_CONFIGURATION_STRING, 502 "configuration string"); 503 if (err) 504 return err; 505 } 506 507 if (!(wacom->max_x && wacom->max_y)) { 508 err = wacom_send_and_wait(wacom, serio, 509 REQUEST_MAX_COORDINATES, 510 "coordinates string"); 511 if (err) 512 return err; 513 } 514 515 return wacom_send_setup_string(wacom, serio); 516 } 517 518 static int wacom_connect(struct serio *serio, struct serio_driver *drv) 519 { 520 struct wacom *wacom; 521 struct input_dev *input_dev; 522 int err = -ENOMEM; 523 524 wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL); 525 input_dev = input_allocate_device(); 526 if (!wacom || !input_dev) 527 goto free_device; 528 529 wacom->dev = input_dev; 530 wacom->extra_z_bits = 1; 531 wacom->eraser_mask = 0x04; 532 wacom->tool = wacom->idx = 0; 533 snprintf(wacom->phys, sizeof(wacom->phys), "%s/input0", serio->phys); 534 input_dev->phys = wacom->phys; 535 input_dev->id.bustype = BUS_RS232; 536 input_dev->id.vendor = SERIO_WACOM_IV; 537 input_dev->id.product = serio->id.extra; 538 input_dev->dev.parent = &serio->dev; 539 540 input_dev->evbit[0] = 541 BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) | BIT_MASK(EV_REL); 542 set_bit(ABS_MISC, input_dev->absbit); 543 set_bit(BTN_TOOL_PEN, input_dev->keybit); 544 set_bit(BTN_TOOL_RUBBER, input_dev->keybit); 545 set_bit(BTN_TOOL_MOUSE, input_dev->keybit); 546 set_bit(BTN_TOUCH, input_dev->keybit); 547 set_bit(BTN_STYLUS, input_dev->keybit); 548 set_bit(BTN_LEFT, input_dev->keybit); 549 set_bit(BTN_RIGHT, input_dev->keybit); 550 set_bit(BTN_MIDDLE, input_dev->keybit); 551 552 serio_set_drvdata(serio, wacom); 553 554 err = serio_open(serio, drv); 555 if (err) 556 goto free_device; 557 558 err = wacom_setup(wacom, serio); 559 if (err) 560 goto close_serio; 561 562 set_bit(INPUT_PROP_DIRECT, input_dev->propbit); 563 if (!(wacom->flags & F_COVERS_SCREEN)) 564 __set_bit(INPUT_PROP_POINTER, input_dev->propbit); 565 566 if (wacom->flags & F_HAS_STYLUS2) 567 __set_bit(BTN_STYLUS2, input_dev->keybit); 568 569 if (wacom->flags & F_HAS_SCROLLWHEEL) 570 __set_bit(REL_WHEEL, input_dev->relbit); 571 572 input_abs_set_res(wacom->dev, ABS_X, wacom->res_x); 573 input_abs_set_res(wacom->dev, ABS_Y, wacom->res_y); 574 input_set_abs_params(wacom->dev, ABS_X, 0, wacom->max_x, 0, 0); 575 input_set_abs_params(wacom->dev, ABS_Y, 0, wacom->max_y, 0, 0); 576 input_set_abs_params(wacom->dev, ABS_PRESSURE, -1, 577 (1 << (7 + wacom->extra_z_bits)) - 1, 0, 0); 578 579 err = input_register_device(wacom->dev); 580 if (err) 581 goto close_serio; 582 583 return 0; 584 585 close_serio: 586 serio_close(serio); 587 free_device: 588 serio_set_drvdata(serio, NULL); 589 input_free_device(input_dev); 590 kfree(wacom); 591 return err; 592 } 593 594 static const struct serio_device_id wacom_serio_ids[] = { 595 { 596 .type = SERIO_RS232, 597 .proto = SERIO_WACOM_IV, 598 .id = SERIO_ANY, 599 .extra = SERIO_ANY, 600 }, 601 { 0 } 602 }; 603 604 MODULE_DEVICE_TABLE(serio, wacom_serio_ids); 605 606 static struct serio_driver wacom_drv = { 607 .driver = { 608 .name = "wacom_serial4", 609 }, 610 .description = "Wacom protocol 4 serial tablet driver", 611 .id_table = wacom_serio_ids, 612 .interrupt = wacom_interrupt, 613 .connect = wacom_connect, 614 .disconnect = wacom_disconnect, 615 }; 616 617 module_serio_driver(wacom_drv); 618