xref: /openbmc/linux/drivers/input/serio/ps2-gpio.c (revision 9bb94643)
1 /*
2  * GPIO based serio bus driver for bit banging the PS/2 protocol
3  *
4  * Author: Danilo Krummrich <danilokrummrich@dk-develop.de>
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  */
10 
11 #include <linux/gpio/consumer.h>
12 #include <linux/interrupt.h>
13 #include <linux/module.h>
14 #include <linux/serio.h>
15 #include <linux/slab.h>
16 #include <linux/platform_device.h>
17 #include <linux/workqueue.h>
18 #include <linux/completion.h>
19 #include <linux/mutex.h>
20 #include <linux/preempt.h>
21 #include <linux/property.h>
22 #include <linux/of.h>
23 #include <linux/jiffies.h>
24 #include <linux/delay.h>
25 
26 #define DRIVER_NAME		"ps2-gpio"
27 
28 #define PS2_MODE_RX		0
29 #define PS2_MODE_TX		1
30 
31 #define PS2_START_BIT		0
32 #define PS2_DATA_BIT0		1
33 #define PS2_DATA_BIT1		2
34 #define PS2_DATA_BIT2		3
35 #define PS2_DATA_BIT3		4
36 #define PS2_DATA_BIT4		5
37 #define PS2_DATA_BIT5		6
38 #define PS2_DATA_BIT6		7
39 #define PS2_DATA_BIT7		8
40 #define PS2_PARITY_BIT		9
41 #define PS2_STOP_BIT		10
42 #define PS2_TX_TIMEOUT		11
43 #define PS2_ACK_BIT		12
44 
45 #define PS2_DEV_RET_ACK		0xfa
46 #define PS2_DEV_RET_NACK	0xfe
47 
48 #define PS2_CMD_RESEND		0xfe
49 
50 struct ps2_gpio_data {
51 	struct device *dev;
52 	struct serio *serio;
53 	unsigned char mode;
54 	struct gpio_desc *gpio_clk;
55 	struct gpio_desc *gpio_data;
56 	bool write_enable;
57 	int irq;
58 	unsigned char rx_cnt;
59 	unsigned char rx_byte;
60 	unsigned char tx_cnt;
61 	unsigned char tx_byte;
62 	struct completion tx_done;
63 	struct mutex tx_mutex;
64 	struct delayed_work tx_work;
65 };
66 
67 static int ps2_gpio_open(struct serio *serio)
68 {
69 	struct ps2_gpio_data *drvdata = serio->port_data;
70 
71 	enable_irq(drvdata->irq);
72 	return 0;
73 }
74 
75 static void ps2_gpio_close(struct serio *serio)
76 {
77 	struct ps2_gpio_data *drvdata = serio->port_data;
78 
79 	flush_delayed_work(&drvdata->tx_work);
80 	disable_irq(drvdata->irq);
81 }
82 
83 static int __ps2_gpio_write(struct serio *serio, unsigned char val)
84 {
85 	struct ps2_gpio_data *drvdata = serio->port_data;
86 
87 	disable_irq_nosync(drvdata->irq);
88 	gpiod_direction_output(drvdata->gpio_clk, 0);
89 
90 	drvdata->mode = PS2_MODE_TX;
91 	drvdata->tx_byte = val;
92 
93 	schedule_delayed_work(&drvdata->tx_work, usecs_to_jiffies(200));
94 
95 	return 0;
96 }
97 
98 static int ps2_gpio_write(struct serio *serio, unsigned char val)
99 {
100 	struct ps2_gpio_data *drvdata = serio->port_data;
101 	int ret = 0;
102 
103 	if (in_task()) {
104 		mutex_lock(&drvdata->tx_mutex);
105 		__ps2_gpio_write(serio, val);
106 		if (!wait_for_completion_timeout(&drvdata->tx_done,
107 						 msecs_to_jiffies(10000)))
108 			ret = SERIO_TIMEOUT;
109 		mutex_unlock(&drvdata->tx_mutex);
110 	} else {
111 		__ps2_gpio_write(serio, val);
112 	}
113 
114 	return ret;
115 }
116 
117 static void ps2_gpio_tx_work_fn(struct work_struct *work)
118 {
119 	struct delayed_work *dwork = to_delayed_work(work);
120 	struct ps2_gpio_data *drvdata = container_of(dwork,
121 						    struct ps2_gpio_data,
122 						    tx_work);
123 
124 	enable_irq(drvdata->irq);
125 	gpiod_direction_output(drvdata->gpio_data, 0);
126 	gpiod_direction_input(drvdata->gpio_clk);
127 }
128 
129 static irqreturn_t ps2_gpio_irq_rx(struct ps2_gpio_data *drvdata)
130 {
131 	unsigned char byte, cnt;
132 	int data;
133 	int rxflags = 0;
134 	static unsigned long old_jiffies;
135 
136 	byte = drvdata->rx_byte;
137 	cnt = drvdata->rx_cnt;
138 
139 	if (old_jiffies == 0)
140 		old_jiffies = jiffies;
141 
142 	if ((jiffies - old_jiffies) > usecs_to_jiffies(100)) {
143 		dev_err(drvdata->dev,
144 			"RX: timeout, probably we missed an interrupt\n");
145 		goto err;
146 	}
147 	old_jiffies = jiffies;
148 
149 	data = gpiod_get_value(drvdata->gpio_data);
150 	if (unlikely(data < 0)) {
151 		dev_err(drvdata->dev, "RX: failed to get data gpio val: %d\n",
152 			data);
153 		goto err;
154 	}
155 
156 	switch (cnt) {
157 	case PS2_START_BIT:
158 		/* start bit should be low */
159 		if (unlikely(data)) {
160 			dev_err(drvdata->dev, "RX: start bit should be low\n");
161 			goto err;
162 		}
163 		break;
164 	case PS2_DATA_BIT0:
165 	case PS2_DATA_BIT1:
166 	case PS2_DATA_BIT2:
167 	case PS2_DATA_BIT3:
168 	case PS2_DATA_BIT4:
169 	case PS2_DATA_BIT5:
170 	case PS2_DATA_BIT6:
171 	case PS2_DATA_BIT7:
172 		/* processing data bits */
173 		if (data)
174 			byte |= (data << (cnt - 1));
175 		break;
176 	case PS2_PARITY_BIT:
177 		/* check odd parity */
178 		if (!((hweight8(byte) & 1) ^ data)) {
179 			rxflags |= SERIO_PARITY;
180 			dev_warn(drvdata->dev, "RX: parity error\n");
181 			if (!drvdata->write_enable)
182 				goto err;
183 		}
184 
185 		/* Do not send spurious ACK's and NACK's when write fn is
186 		 * not provided.
187 		 */
188 		if (!drvdata->write_enable) {
189 			if (byte == PS2_DEV_RET_NACK)
190 				goto err;
191 			else if (byte == PS2_DEV_RET_ACK)
192 				break;
193 		}
194 
195 		/* Let's send the data without waiting for the stop bit to be
196 		 * sent. It may happen that we miss the stop bit. When this
197 		 * happens we have no way to recover from this, certainly
198 		 * missing the parity bit would be recognized when processing
199 		 * the stop bit. When missing both, data is lost.
200 		 */
201 		serio_interrupt(drvdata->serio, byte, rxflags);
202 		dev_dbg(drvdata->dev, "RX: sending byte 0x%x\n", byte);
203 		break;
204 	case PS2_STOP_BIT:
205 		/* stop bit should be high */
206 		if (unlikely(!data)) {
207 			dev_err(drvdata->dev, "RX: stop bit should be high\n");
208 			goto err;
209 		}
210 		cnt = byte = 0;
211 		old_jiffies = 0;
212 		goto end; /* success */
213 	default:
214 		dev_err(drvdata->dev, "RX: got out of sync with the device\n");
215 		goto err;
216 	}
217 
218 	cnt++;
219 	goto end; /* success */
220 
221 err:
222 	cnt = byte = 0;
223 	old_jiffies = 0;
224 	__ps2_gpio_write(drvdata->serio, PS2_CMD_RESEND);
225 end:
226 	drvdata->rx_cnt = cnt;
227 	drvdata->rx_byte = byte;
228 	return IRQ_HANDLED;
229 }
230 
231 static irqreturn_t ps2_gpio_irq_tx(struct ps2_gpio_data *drvdata)
232 {
233 	unsigned char byte, cnt;
234 	int data;
235 	static unsigned long old_jiffies;
236 
237 	cnt = drvdata->tx_cnt;
238 	byte = drvdata->tx_byte;
239 
240 	if (old_jiffies == 0)
241 		old_jiffies = jiffies;
242 
243 	if ((jiffies - old_jiffies) > usecs_to_jiffies(100)) {
244 		dev_err(drvdata->dev,
245 			"TX: timeout, probably we missed an interrupt\n");
246 		goto err;
247 	}
248 	old_jiffies = jiffies;
249 
250 	switch (cnt) {
251 	case PS2_START_BIT:
252 		/* should never happen */
253 		dev_err(drvdata->dev,
254 			"TX: start bit should have been sent already\n");
255 		goto err;
256 	case PS2_DATA_BIT0:
257 	case PS2_DATA_BIT1:
258 	case PS2_DATA_BIT2:
259 	case PS2_DATA_BIT3:
260 	case PS2_DATA_BIT4:
261 	case PS2_DATA_BIT5:
262 	case PS2_DATA_BIT6:
263 	case PS2_DATA_BIT7:
264 		data = byte & BIT(cnt - 1);
265 		gpiod_set_value(drvdata->gpio_data, data);
266 		break;
267 	case PS2_PARITY_BIT:
268 		/* do odd parity */
269 		data = !(hweight8(byte) & 1);
270 		gpiod_set_value(drvdata->gpio_data, data);
271 		break;
272 	case PS2_STOP_BIT:
273 		/* release data line to generate stop bit */
274 		gpiod_direction_input(drvdata->gpio_data);
275 		break;
276 	case PS2_TX_TIMEOUT:
277 		/* Devices generate one extra clock pulse before sending the
278 		 * acknowledgment.
279 		 */
280 		break;
281 	case PS2_ACK_BIT:
282 		gpiod_direction_input(drvdata->gpio_data);
283 		data = gpiod_get_value(drvdata->gpio_data);
284 		if (data) {
285 			dev_warn(drvdata->dev, "TX: received NACK, retry\n");
286 			goto err;
287 		}
288 
289 		drvdata->mode = PS2_MODE_RX;
290 		complete(&drvdata->tx_done);
291 
292 		cnt = 1;
293 		old_jiffies = 0;
294 		goto end; /* success */
295 	default:
296 		/* Probably we missed the stop bit. Therefore we release data
297 		 * line and try again.
298 		 */
299 		gpiod_direction_input(drvdata->gpio_data);
300 		dev_err(drvdata->dev, "TX: got out of sync with the device\n");
301 		goto err;
302 	}
303 
304 	cnt++;
305 	goto end; /* success */
306 
307 err:
308 	cnt = 1;
309 	old_jiffies = 0;
310 	gpiod_direction_input(drvdata->gpio_data);
311 	__ps2_gpio_write(drvdata->serio, drvdata->tx_byte);
312 end:
313 	drvdata->tx_cnt = cnt;
314 	return IRQ_HANDLED;
315 }
316 
317 static irqreturn_t ps2_gpio_irq(int irq, void *dev_id)
318 {
319 	struct ps2_gpio_data *drvdata = dev_id;
320 
321 	return drvdata->mode ? ps2_gpio_irq_tx(drvdata) :
322 		ps2_gpio_irq_rx(drvdata);
323 }
324 
325 static int ps2_gpio_get_props(struct device *dev,
326 				 struct ps2_gpio_data *drvdata)
327 {
328 	drvdata->gpio_data = devm_gpiod_get(dev, "data", GPIOD_IN);
329 	if (IS_ERR(drvdata->gpio_data)) {
330 		dev_err(dev, "failed to request data gpio: %ld",
331 			PTR_ERR(drvdata->gpio_data));
332 		return PTR_ERR(drvdata->gpio_data);
333 	}
334 
335 	drvdata->gpio_clk = devm_gpiod_get(dev, "clk", GPIOD_IN);
336 	if (IS_ERR(drvdata->gpio_clk)) {
337 		dev_err(dev, "failed to request clock gpio: %ld",
338 			PTR_ERR(drvdata->gpio_clk));
339 		return PTR_ERR(drvdata->gpio_clk);
340 	}
341 
342 	drvdata->write_enable = device_property_read_bool(dev,
343 				"write-enable");
344 
345 	return 0;
346 }
347 
348 static int ps2_gpio_probe(struct platform_device *pdev)
349 {
350 	struct ps2_gpio_data *drvdata;
351 	struct serio *serio;
352 	struct device *dev = &pdev->dev;
353 	int error;
354 
355 	drvdata = devm_kzalloc(dev, sizeof(struct ps2_gpio_data), GFP_KERNEL);
356 	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
357 	if (!drvdata || !serio) {
358 		error = -ENOMEM;
359 		goto err_free_serio;
360 	}
361 
362 	error = ps2_gpio_get_props(dev, drvdata);
363 	if (error)
364 		goto err_free_serio;
365 
366 	if (gpiod_cansleep(drvdata->gpio_data) ||
367 	    gpiod_cansleep(drvdata->gpio_clk)) {
368 		dev_err(dev, "GPIO data or clk are connected via slow bus\n");
369 		error = -EINVAL;
370 		goto err_free_serio;
371 	}
372 
373 	drvdata->irq = platform_get_irq(pdev, 0);
374 	if (drvdata->irq < 0) {
375 		dev_err(dev, "failed to get irq from platform resource: %d\n",
376 			drvdata->irq);
377 		error = drvdata->irq;
378 		goto err_free_serio;
379 	}
380 
381 	error = devm_request_irq(dev, drvdata->irq, ps2_gpio_irq,
382 				 IRQF_NO_THREAD, DRIVER_NAME, drvdata);
383 	if (error) {
384 		dev_err(dev, "failed to request irq %d: %d\n",
385 			drvdata->irq, error);
386 		goto err_free_serio;
387 	}
388 
389 	/* Keep irq disabled until serio->open is called. */
390 	disable_irq(drvdata->irq);
391 
392 	serio->id.type = SERIO_8042;
393 	serio->open = ps2_gpio_open;
394 	serio->close = ps2_gpio_close;
395 	/* Write can be enabled in platform/dt data, but possibly it will not
396 	 * work because of the tough timings.
397 	 */
398 	serio->write = drvdata->write_enable ? ps2_gpio_write : NULL;
399 	serio->port_data = drvdata;
400 	serio->dev.parent = dev;
401 	strlcpy(serio->name, dev_name(dev), sizeof(serio->name));
402 	strlcpy(serio->phys, dev_name(dev), sizeof(serio->phys));
403 
404 	drvdata->serio = serio;
405 	drvdata->dev = dev;
406 	drvdata->mode = PS2_MODE_RX;
407 
408 	/* Tx count always starts at 1, as the start bit is sent implicitly by
409 	 * host-to-device communication initialization.
410 	 */
411 	drvdata->tx_cnt = 1;
412 
413 	INIT_DELAYED_WORK(&drvdata->tx_work, ps2_gpio_tx_work_fn);
414 	init_completion(&drvdata->tx_done);
415 	mutex_init(&drvdata->tx_mutex);
416 
417 	serio_register_port(serio);
418 	platform_set_drvdata(pdev, drvdata);
419 
420 	return 0;	/* success */
421 
422 err_free_serio:
423 	kfree(serio);
424 	return error;
425 }
426 
427 static int ps2_gpio_remove(struct platform_device *pdev)
428 {
429 	struct ps2_gpio_data *drvdata = platform_get_drvdata(pdev);
430 
431 	serio_unregister_port(drvdata->serio);
432 	return 0;
433 }
434 
435 #if defined(CONFIG_OF)
436 static const struct of_device_id ps2_gpio_match[] = {
437 	{ .compatible = "ps2-gpio", },
438 	{ },
439 };
440 MODULE_DEVICE_TABLE(of, ps2_gpio_match);
441 #endif
442 
443 static struct platform_driver ps2_gpio_driver = {
444 	.probe		= ps2_gpio_probe,
445 	.remove		= ps2_gpio_remove,
446 	.driver = {
447 		.name = DRIVER_NAME,
448 		.of_match_table = of_match_ptr(ps2_gpio_match),
449 	},
450 };
451 module_platform_driver(ps2_gpio_driver);
452 
453 MODULE_AUTHOR("Danilo Krummrich <danilokrummrich@dk-develop.de>");
454 MODULE_DESCRIPTION("GPIO PS2 driver");
455 MODULE_LICENSE("GPL v2");
456