1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Parallel port to Keyboard port adapter driver for Linux 4 * 5 * Copyright (c) 1999-2004 Vojtech Pavlik 6 */ 7 8 9 /* 10 * To connect an AT or XT keyboard to the parallel port, a fairly simple adapter 11 * can be made: 12 * 13 * Parallel port Keyboard port 14 * 15 * +5V --------------------- +5V (4) 16 * 17 * ______ 18 * +5V -------|______|--. 19 * | 20 * ACK (10) ------------| 21 * |--- KBD CLOCK (5) 22 * STROBE (1) ---|<|----' 23 * 24 * ______ 25 * +5V -------|______|--. 26 * | 27 * BUSY (11) -----------| 28 * |--- KBD DATA (1) 29 * AUTOFD (14) --|<|----' 30 * 31 * GND (18-25) ------------- GND (3) 32 * 33 * The diodes can be fairly any type, and the resistors should be somewhere 34 * around 5 kOhm, but the adapter will likely work without the resistors, 35 * too. 36 * 37 * The +5V source can be taken either from USB, from mouse or keyboard ports, 38 * or from a joystick port. Unfortunately, the parallel port of a PC doesn't 39 * have a +5V pin, and feeding the keyboard from signal pins is out of question 40 * with 300 mA power reqirement of a typical AT keyboard. 41 */ 42 43 #include <linux/module.h> 44 #include <linux/parport.h> 45 #include <linux/slab.h> 46 #include <linux/init.h> 47 #include <linux/serio.h> 48 49 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); 50 MODULE_DESCRIPTION("Parallel port to Keyboard port adapter driver"); 51 MODULE_LICENSE("GPL"); 52 53 static unsigned int parkbd_pp_no; 54 module_param_named(port, parkbd_pp_no, int, 0); 55 MODULE_PARM_DESC(port, "Parallel port the adapter is connected to (default is 0)"); 56 57 static unsigned int parkbd_mode = SERIO_8042; 58 module_param_named(mode, parkbd_mode, uint, 0); 59 MODULE_PARM_DESC(mode, "Mode of operation: XT = 0/AT = 1 (default)"); 60 61 #define PARKBD_CLOCK 0x01 /* Strobe & Ack */ 62 #define PARKBD_DATA 0x02 /* AutoFd & Busy */ 63 64 static int parkbd_buffer; 65 static int parkbd_counter; 66 static unsigned long parkbd_last; 67 static int parkbd_writing; 68 static unsigned long parkbd_start; 69 70 static struct pardevice *parkbd_dev; 71 static struct serio *parkbd_port; 72 73 static int parkbd_readlines(void) 74 { 75 return (parport_read_status(parkbd_dev->port) >> 6) ^ 2; 76 } 77 78 static void parkbd_writelines(int data) 79 { 80 parport_write_control(parkbd_dev->port, (~data & 3) | 0x10); 81 } 82 83 static int parkbd_write(struct serio *port, unsigned char c) 84 { 85 unsigned char p; 86 87 if (!parkbd_mode) return -1; 88 89 p = c ^ (c >> 4); 90 p = p ^ (p >> 2); 91 p = p ^ (p >> 1); 92 93 parkbd_counter = 0; 94 parkbd_writing = 1; 95 parkbd_buffer = c | (((int) (~p & 1)) << 8) | 0x600; 96 97 parkbd_writelines(2); 98 99 return 0; 100 } 101 102 static void parkbd_interrupt(void *dev_id) 103 { 104 105 if (parkbd_writing) { 106 107 if (parkbd_counter && ((parkbd_counter == 11) || time_after(jiffies, parkbd_last + HZ/100))) { 108 parkbd_counter = 0; 109 parkbd_buffer = 0; 110 parkbd_writing = 0; 111 parkbd_writelines(3); 112 return; 113 } 114 115 parkbd_writelines(((parkbd_buffer >> parkbd_counter++) & 1) | 2); 116 117 if (parkbd_counter == 11) { 118 parkbd_counter = 0; 119 parkbd_buffer = 0; 120 parkbd_writing = 0; 121 parkbd_writelines(3); 122 } 123 124 } else { 125 126 if ((parkbd_counter == parkbd_mode + 10) || time_after(jiffies, parkbd_last + HZ/100)) { 127 parkbd_counter = 0; 128 parkbd_buffer = 0; 129 } 130 131 parkbd_buffer |= (parkbd_readlines() >> 1) << parkbd_counter++; 132 133 if (parkbd_counter == parkbd_mode + 10) 134 serio_interrupt(parkbd_port, (parkbd_buffer >> (2 - parkbd_mode)) & 0xff, 0); 135 } 136 137 parkbd_last = jiffies; 138 } 139 140 static int parkbd_getport(struct parport *pp) 141 { 142 struct pardev_cb parkbd_parport_cb; 143 144 memset(&parkbd_parport_cb, 0, sizeof(parkbd_parport_cb)); 145 parkbd_parport_cb.irq_func = parkbd_interrupt; 146 parkbd_parport_cb.flags = PARPORT_FLAG_EXCL; 147 148 parkbd_dev = parport_register_dev_model(pp, "parkbd", 149 &parkbd_parport_cb, 0); 150 151 if (!parkbd_dev) 152 return -ENODEV; 153 154 if (parport_claim(parkbd_dev)) { 155 parport_unregister_device(parkbd_dev); 156 return -EBUSY; 157 } 158 159 parkbd_start = jiffies; 160 161 return 0; 162 } 163 164 static struct serio *parkbd_allocate_serio(void) 165 { 166 struct serio *serio; 167 168 serio = kzalloc(sizeof(struct serio), GFP_KERNEL); 169 if (serio) { 170 serio->id.type = parkbd_mode; 171 serio->write = parkbd_write, 172 strlcpy(serio->name, "PARKBD AT/XT keyboard adapter", sizeof(serio->name)); 173 snprintf(serio->phys, sizeof(serio->phys), "%s/serio0", parkbd_dev->port->name); 174 } 175 176 return serio; 177 } 178 179 static void parkbd_attach(struct parport *pp) 180 { 181 if (pp->number != parkbd_pp_no) { 182 pr_debug("Not using parport%d.\n", pp->number); 183 return; 184 } 185 186 if (parkbd_getport(pp)) 187 return; 188 189 parkbd_port = parkbd_allocate_serio(); 190 if (!parkbd_port) { 191 parport_release(parkbd_dev); 192 parport_unregister_device(parkbd_dev); 193 return; 194 } 195 196 parkbd_writelines(3); 197 198 serio_register_port(parkbd_port); 199 200 printk(KERN_INFO "serio: PARKBD %s adapter on %s\n", 201 parkbd_mode ? "AT" : "XT", parkbd_dev->port->name); 202 203 return; 204 } 205 206 static void parkbd_detach(struct parport *port) 207 { 208 if (!parkbd_port || port->number != parkbd_pp_no) 209 return; 210 211 parport_release(parkbd_dev); 212 serio_unregister_port(parkbd_port); 213 parport_unregister_device(parkbd_dev); 214 parkbd_port = NULL; 215 } 216 217 static struct parport_driver parkbd_parport_driver = { 218 .name = "parkbd", 219 .match_port = parkbd_attach, 220 .detach = parkbd_detach, 221 .devmodel = true, 222 }; 223 224 static int __init parkbd_init(void) 225 { 226 return parport_register_driver(&parkbd_parport_driver); 227 } 228 229 static void __exit parkbd_exit(void) 230 { 231 parport_unregister_driver(&parkbd_parport_driver); 232 } 233 234 module_init(parkbd_init); 235 module_exit(parkbd_exit); 236