1# 2# Input core configuration 3# 4config SERIO 5 tristate "Serial I/O support" if EMBEDDED || !X86 6 default y 7 ---help--- 8 Say Yes here if you have any input device that uses serial I/O to 9 communicate with the system. This includes the 10 * standard AT keyboard and PS/2 mouse * 11 as well as serial mice, Sun keyboards, some joysticks and 6dof 12 devices and more. 13 14 If unsure, say Y. 15 16 To compile this driver as a module, choose M here: the 17 module will be called serio. 18 19if SERIO 20 21config SERIO_I8042 22 tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86 23 default y 24 depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K && !BLACKFIN 25 ---help--- 26 i8042 is the chip over which the standard AT keyboard and PS/2 27 mouse are connected to the computer. If you use these devices, 28 you'll need to say Y here. 29 30 If unsure, say Y. 31 32 To compile this driver as a module, choose M here: the 33 module will be called i8042. 34 35config SERIO_SERPORT 36 tristate "Serial port line discipline" 37 default y 38 ---help--- 39 Say Y here if you plan to use an input device (mouse, joystick, 40 tablet, 6dof) that communicates over the RS232 serial (COM) port. 41 42 More information is available: <file:Documentation/input/input.txt> 43 44 If unsure, say Y. 45 46 To compile this driver as a module, choose M here: the 47 module will be called serport. 48 49config SERIO_CT82C710 50 tristate "ct82c710 Aux port controller" 51 depends on X86 52 ---help--- 53 Say Y here if you have a Texas Instruments TravelMate notebook 54 equipped with the ct82c710 chip and want to use a mouse connected 55 to the "QuickPort". 56 57 If unsure, say N. 58 59 To compile this driver as a module, choose M here: the 60 module will be called ct82c710. 61 62config SERIO_Q40KBD 63 tristate "Q40 keyboard controller" 64 depends on Q40 65 66config SERIO_PARKBD 67 tristate "Parallel port keyboard adapter" 68 depends on PARPORT 69 ---help--- 70 Say Y here if you built a simple parallel port adapter to attach 71 an additional AT keyboard, XT keyboard or PS/2 mouse. 72 73 More information is available: <file:Documentation/input/input.txt> 74 75 If unsure, say N. 76 77 To compile this driver as a module, choose M here: the 78 module will be called parkbd. 79 80config SERIO_RPCKBD 81 tristate "Acorn RiscPC keyboard controller" 82 depends on ARCH_ACORN 83 default y 84 help 85 Say Y here if you have the Acorn RiscPC and want to use an AT 86 keyboard connected to its keyboard controller. 87 88 To compile this driver as a module, choose M here: the 89 module will be called rpckbd. 90 91config SERIO_AT32PSIF 92 tristate "AVR32 PSIF PS/2 keyboard and mouse controller" 93 depends on AVR32 94 help 95 Say Y here if you want to use the PSIF peripheral on AVR32 devices 96 and connect a PS/2 keyboard and/or mouse to it. 97 98 To compile this driver as a module, choose M here: the module will 99 be called at32psif. 100 101config SERIO_AMBAKMI 102 tristate "AMBA KMI keyboard controller" 103 depends on ARM_AMBA 104 105config SERIO_SA1111 106 tristate "Intel SA1111 keyboard controller" 107 depends on SA1111 108 109config SERIO_GSCPS2 110 tristate "HP GSC PS/2 keyboard and PS/2 mouse controller" 111 depends on GSC 112 default y 113 help 114 This driver provides support for the PS/2 ports on PA-RISC machines 115 over which HP PS/2 keyboards and PS/2 mice may be connected. 116 If you use these devices, you'll need to say Y here. 117 118 It's safe to enable this driver, so if unsure, say Y. 119 120 To compile this driver as a module, choose M here: the 121 module will be called gscps2. 122 123config HP_SDC 124 tristate "HP System Device Controller i8042 Support" 125 depends on (GSC || HP300) && SERIO 126 default y 127 ---help--- 128 This option enables support for the "System Device 129 Controller", an i8042 carrying microcode to manage a 130 few miscellaneous devices on some Hewlett Packard systems. 131 The SDC itself contains a 10ms resolution timer/clock capable 132 of delivering interrupts on a periodic and one-shot basis. 133 The SDC may also be connected to a battery-backed real-time 134 clock, a basic audio waveform generator, and an HP-HIL Master 135 Link Controller serving up to seven input devices. 136 137 By itself this option is rather useless, but enabling it will 138 enable selection of drivers for the abovementioned devices. 139 It is, however, incompatible with the old, reliable HIL keyboard 140 driver, and the new HIL driver is experimental, so if you plan 141 to use a HIL keyboard as your primary keyboard, you may wish 142 to keep using that driver until the new HIL drivers have had 143 more testing. 144 145config HIL_MLC 146 tristate "HIL MLC Support (needed for HIL input devices)" 147 depends on HP_SDC 148 149config SERIO_PCIPS2 150 tristate "PCI PS/2 keyboard and PS/2 mouse controller" 151 depends on PCI 152 help 153 Say Y here if you have a Mobility Docking station with PS/2 154 keyboard and mice ports. 155 156 To compile this driver as a module, choose M here: the 157 module will be called pcips2. 158 159config SERIO_MACEPS2 160 tristate "SGI O2 MACE PS/2 controller" 161 depends on SGI_IP32 162 help 163 Say Y here if you have SGI O2 workstation and want to use its 164 PS/2 ports. 165 166 To compile this driver as a module, choose M here: the 167 module will be called maceps2. 168 169config SERIO_LIBPS2 170 tristate "PS/2 driver library" if EMBEDDED 171 help 172 Say Y here if you are using a driver for device connected 173 to a PS/2 port, such as PS/2 mouse or standard AT keyboard. 174 175 To compile this driver as a module, choose M here: the 176 module will be called libps2. 177 178config SERIO_RAW 179 tristate "Raw access to serio ports" 180 help 181 Say Y here if you want to have raw access to serio ports, such as 182 AUX ports on i8042 keyboard controller. Each serio port that is 183 bound to this driver will be accessible via a char device with 184 major 10 and dynamically allocated minor. The driver will try 185 allocating minor 1 (that historically corresponds to /dev/psaux) 186 first. To bind this driver to a serio port use sysfs interface: 187 188 echo -n "serio_raw" > /sys/bus/serio/devices/serioX/drvctl 189 190 To compile this driver as a module, choose M here: the 191 module will be called serio_raw. 192 193config SERIO_XILINX_XPS_PS2 194 tristate "Xilinx XPS PS/2 Controller Support" 195 depends on PPC || MICROBLAZE 196 help 197 This driver supports XPS PS/2 IP from the Xilinx EDK on 198 PowerPC platform. 199 200 To compile this driver as a module, choose M here: the 201 module will be called xilinx_ps2. 202 203endif 204