1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (c) 2012-2016 Synaptics Incorporated 4 */ 5 6 #include <linux/kernel.h> 7 #include <linux/rmi.h> 8 #include <linux/input.h> 9 #include <linux/slab.h> 10 #include "rmi_driver.h" 11 12 #define RMI_F30_QUERY_SIZE 2 13 14 /* Defs for Query 0 */ 15 #define RMI_F30_EXTENDED_PATTERNS 0x01 16 #define RMI_F30_HAS_MAPPABLE_BUTTONS BIT(1) 17 #define RMI_F30_HAS_LED BIT(2) 18 #define RMI_F30_HAS_GPIO BIT(3) 19 #define RMI_F30_HAS_HAPTIC BIT(4) 20 #define RMI_F30_HAS_GPIO_DRV_CTL BIT(5) 21 #define RMI_F30_HAS_MECH_MOUSE_BTNS BIT(6) 22 23 /* Defs for Query 1 */ 24 #define RMI_F30_GPIO_LED_COUNT 0x1F 25 26 /* Defs for Control Registers */ 27 #define RMI_F30_CTRL_1_GPIO_DEBOUNCE 0x01 28 #define RMI_F30_CTRL_1_HALT BIT(4) 29 #define RMI_F30_CTRL_1_HALTED BIT(5) 30 #define RMI_F30_CTRL_10_NUM_MECH_MOUSE_BTNS 0x03 31 32 #define RMI_F30_CTRL_MAX_REGS 32 33 #define RMI_F30_CTRL_MAX_BYTES DIV_ROUND_UP(RMI_F30_CTRL_MAX_REGS, 8) 34 #define RMI_F30_CTRL_MAX_REG_BLOCKS 11 35 36 #define RMI_F30_CTRL_REGS_MAX_SIZE (RMI_F30_CTRL_MAX_BYTES \ 37 + 1 \ 38 + RMI_F30_CTRL_MAX_BYTES \ 39 + RMI_F30_CTRL_MAX_BYTES \ 40 + RMI_F30_CTRL_MAX_BYTES \ 41 + 6 \ 42 + RMI_F30_CTRL_MAX_REGS \ 43 + RMI_F30_CTRL_MAX_REGS \ 44 + RMI_F30_CTRL_MAX_BYTES \ 45 + 1 \ 46 + 1) 47 48 #define TRACKSTICK_RANGE_START 3 49 #define TRACKSTICK_RANGE_END 6 50 51 struct rmi_f30_ctrl_data { 52 int address; 53 int length; 54 u8 *regs; 55 }; 56 57 struct f30_data { 58 /* Query Data */ 59 bool has_extended_pattern; 60 bool has_mappable_buttons; 61 bool has_led; 62 bool has_gpio; 63 bool has_haptic; 64 bool has_gpio_driver_control; 65 bool has_mech_mouse_btns; 66 u8 gpioled_count; 67 68 u8 register_count; 69 70 /* Control Register Data */ 71 struct rmi_f30_ctrl_data ctrl[RMI_F30_CTRL_MAX_REG_BLOCKS]; 72 u8 ctrl_regs[RMI_F30_CTRL_REGS_MAX_SIZE]; 73 u32 ctrl_regs_size; 74 75 u8 data_regs[RMI_F30_CTRL_MAX_BYTES]; 76 u16 *gpioled_key_map; 77 78 struct input_dev *input; 79 80 struct rmi_function *f03; 81 bool trackstick_buttons; 82 }; 83 84 static int rmi_f30_read_control_parameters(struct rmi_function *fn, 85 struct f30_data *f30) 86 { 87 int error; 88 89 error = rmi_read_block(fn->rmi_dev, fn->fd.control_base_addr, 90 f30->ctrl_regs, f30->ctrl_regs_size); 91 if (error) { 92 dev_err(&fn->dev, 93 "%s: Could not read control registers at 0x%x: %d\n", 94 __func__, fn->fd.control_base_addr, error); 95 return error; 96 } 97 98 return 0; 99 } 100 101 static void rmi_f30_report_button(struct rmi_function *fn, 102 struct f30_data *f30, unsigned int button) 103 { 104 unsigned int reg_num = button >> 3; 105 unsigned int bit_num = button & 0x07; 106 u16 key_code = f30->gpioled_key_map[button]; 107 bool key_down = !(f30->data_regs[reg_num] & BIT(bit_num)); 108 109 if (f30->trackstick_buttons && 110 button >= TRACKSTICK_RANGE_START && 111 button <= TRACKSTICK_RANGE_END) { 112 rmi_f03_overwrite_button(f30->f03, key_code, key_down); 113 } else { 114 rmi_dbg(RMI_DEBUG_FN, &fn->dev, 115 "%s: call input report key (0x%04x) value (0x%02x)", 116 __func__, key_code, key_down); 117 118 input_report_key(f30->input, key_code, key_down); 119 } 120 } 121 122 static irqreturn_t rmi_f30_attention(int irq, void *ctx) 123 { 124 struct rmi_function *fn = ctx; 125 struct f30_data *f30 = dev_get_drvdata(&fn->dev); 126 struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev); 127 int error; 128 int i; 129 130 /* Read the gpi led data. */ 131 if (drvdata->attn_data.data) { 132 if (drvdata->attn_data.size < f30->register_count) { 133 dev_warn(&fn->dev, 134 "F30 interrupted, but data is missing\n"); 135 return IRQ_HANDLED; 136 } 137 memcpy(f30->data_regs, drvdata->attn_data.data, 138 f30->register_count); 139 drvdata->attn_data.data += f30->register_count; 140 drvdata->attn_data.size -= f30->register_count; 141 } else { 142 error = rmi_read_block(fn->rmi_dev, fn->fd.data_base_addr, 143 f30->data_regs, f30->register_count); 144 if (error) { 145 dev_err(&fn->dev, 146 "%s: Failed to read F30 data registers: %d\n", 147 __func__, error); 148 return IRQ_RETVAL(error); 149 } 150 } 151 152 if (f30->has_gpio) { 153 for (i = 0; i < f30->gpioled_count; i++) 154 if (f30->gpioled_key_map[i] != KEY_RESERVED) 155 rmi_f30_report_button(fn, f30, i); 156 if (f30->trackstick_buttons) 157 rmi_f03_commit_buttons(f30->f03); 158 } 159 160 return IRQ_HANDLED; 161 } 162 163 static int rmi_f30_config(struct rmi_function *fn) 164 { 165 struct f30_data *f30 = dev_get_drvdata(&fn->dev); 166 struct rmi_driver *drv = fn->rmi_dev->driver; 167 const struct rmi_device_platform_data *pdata = 168 rmi_get_platform_data(fn->rmi_dev); 169 int error; 170 171 /* can happen if gpio_data.disable is set */ 172 if (!f30) 173 return 0; 174 175 if (pdata->gpio_data.trackstick_buttons) { 176 /* Try [re-]establish link to F03. */ 177 f30->f03 = rmi_find_function(fn->rmi_dev, 0x03); 178 f30->trackstick_buttons = f30->f03 != NULL; 179 } 180 181 if (pdata->gpio_data.disable) { 182 drv->clear_irq_bits(fn->rmi_dev, fn->irq_mask); 183 } else { 184 /* Write Control Register values back to device */ 185 error = rmi_write_block(fn->rmi_dev, fn->fd.control_base_addr, 186 f30->ctrl_regs, f30->ctrl_regs_size); 187 if (error) { 188 dev_err(&fn->dev, 189 "%s: Could not write control registers at 0x%x: %d\n", 190 __func__, fn->fd.control_base_addr, error); 191 return error; 192 } 193 194 drv->set_irq_bits(fn->rmi_dev, fn->irq_mask); 195 } 196 197 return 0; 198 } 199 200 static void rmi_f30_set_ctrl_data(struct rmi_f30_ctrl_data *ctrl, 201 int *ctrl_addr, int len, u8 **reg) 202 { 203 ctrl->address = *ctrl_addr; 204 ctrl->length = len; 205 ctrl->regs = *reg; 206 *ctrl_addr += len; 207 *reg += len; 208 } 209 210 static bool rmi_f30_is_valid_button(int button, struct rmi_f30_ctrl_data *ctrl) 211 { 212 int byte_position = button >> 3; 213 int bit_position = button & 0x07; 214 215 /* 216 * ctrl2 -> dir == 0 -> input mode 217 * ctrl3 -> data == 1 -> actual button 218 */ 219 return !(ctrl[2].regs[byte_position] & BIT(bit_position)) && 220 (ctrl[3].regs[byte_position] & BIT(bit_position)); 221 } 222 223 static int rmi_f30_map_gpios(struct rmi_function *fn, 224 struct f30_data *f30) 225 { 226 const struct rmi_device_platform_data *pdata = 227 rmi_get_platform_data(fn->rmi_dev); 228 struct input_dev *input = f30->input; 229 unsigned int button = BTN_LEFT; 230 unsigned int trackstick_button = BTN_LEFT; 231 bool button_mapped = false; 232 int i; 233 int button_count = min_t(u8, f30->gpioled_count, TRACKSTICK_RANGE_END); 234 235 f30->gpioled_key_map = devm_kcalloc(&fn->dev, 236 button_count, 237 sizeof(f30->gpioled_key_map[0]), 238 GFP_KERNEL); 239 if (!f30->gpioled_key_map) { 240 dev_err(&fn->dev, "Failed to allocate gpioled map memory.\n"); 241 return -ENOMEM; 242 } 243 244 for (i = 0; i < button_count; i++) { 245 if (!rmi_f30_is_valid_button(i, f30->ctrl)) 246 continue; 247 248 if (pdata->gpio_data.trackstick_buttons && 249 i >= TRACKSTICK_RANGE_START && i < TRACKSTICK_RANGE_END) { 250 f30->gpioled_key_map[i] = trackstick_button++; 251 } else if (!pdata->gpio_data.buttonpad || !button_mapped) { 252 f30->gpioled_key_map[i] = button; 253 input_set_capability(input, EV_KEY, button++); 254 button_mapped = true; 255 } 256 } 257 258 input->keycode = f30->gpioled_key_map; 259 input->keycodesize = sizeof(f30->gpioled_key_map[0]); 260 input->keycodemax = f30->gpioled_count; 261 262 /* 263 * Buttonpad could be also inferred from f30->has_mech_mouse_btns, 264 * but I am not sure, so use only the pdata info and the number of 265 * mapped buttons. 266 */ 267 if (pdata->gpio_data.buttonpad || (button - BTN_LEFT == 1)) 268 __set_bit(INPUT_PROP_BUTTONPAD, input->propbit); 269 270 return 0; 271 } 272 273 static int rmi_f30_initialize(struct rmi_function *fn, struct f30_data *f30) 274 { 275 u8 *ctrl_reg = f30->ctrl_regs; 276 int control_address = fn->fd.control_base_addr; 277 u8 buf[RMI_F30_QUERY_SIZE]; 278 int error; 279 280 error = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr, 281 buf, RMI_F30_QUERY_SIZE); 282 if (error) { 283 dev_err(&fn->dev, "Failed to read query register\n"); 284 return error; 285 } 286 287 f30->has_extended_pattern = buf[0] & RMI_F30_EXTENDED_PATTERNS; 288 f30->has_mappable_buttons = buf[0] & RMI_F30_HAS_MAPPABLE_BUTTONS; 289 f30->has_led = buf[0] & RMI_F30_HAS_LED; 290 f30->has_gpio = buf[0] & RMI_F30_HAS_GPIO; 291 f30->has_haptic = buf[0] & RMI_F30_HAS_HAPTIC; 292 f30->has_gpio_driver_control = buf[0] & RMI_F30_HAS_GPIO_DRV_CTL; 293 f30->has_mech_mouse_btns = buf[0] & RMI_F30_HAS_MECH_MOUSE_BTNS; 294 f30->gpioled_count = buf[1] & RMI_F30_GPIO_LED_COUNT; 295 296 f30->register_count = DIV_ROUND_UP(f30->gpioled_count, 8); 297 298 if (f30->has_gpio && f30->has_led) 299 rmi_f30_set_ctrl_data(&f30->ctrl[0], &control_address, 300 f30->register_count, &ctrl_reg); 301 302 rmi_f30_set_ctrl_data(&f30->ctrl[1], &control_address, 303 sizeof(u8), &ctrl_reg); 304 305 if (f30->has_gpio) { 306 rmi_f30_set_ctrl_data(&f30->ctrl[2], &control_address, 307 f30->register_count, &ctrl_reg); 308 309 rmi_f30_set_ctrl_data(&f30->ctrl[3], &control_address, 310 f30->register_count, &ctrl_reg); 311 } 312 313 if (f30->has_led) { 314 rmi_f30_set_ctrl_data(&f30->ctrl[4], &control_address, 315 f30->register_count, &ctrl_reg); 316 317 rmi_f30_set_ctrl_data(&f30->ctrl[5], &control_address, 318 f30->has_extended_pattern ? 6 : 2, 319 &ctrl_reg); 320 } 321 322 if (f30->has_led || f30->has_gpio_driver_control) { 323 /* control 6 uses a byte per gpio/led */ 324 rmi_f30_set_ctrl_data(&f30->ctrl[6], &control_address, 325 f30->gpioled_count, &ctrl_reg); 326 } 327 328 if (f30->has_mappable_buttons) { 329 /* control 7 uses a byte per gpio/led */ 330 rmi_f30_set_ctrl_data(&f30->ctrl[7], &control_address, 331 f30->gpioled_count, &ctrl_reg); 332 } 333 334 if (f30->has_haptic) { 335 rmi_f30_set_ctrl_data(&f30->ctrl[8], &control_address, 336 f30->register_count, &ctrl_reg); 337 338 rmi_f30_set_ctrl_data(&f30->ctrl[9], &control_address, 339 sizeof(u8), &ctrl_reg); 340 } 341 342 if (f30->has_mech_mouse_btns) 343 rmi_f30_set_ctrl_data(&f30->ctrl[10], &control_address, 344 sizeof(u8), &ctrl_reg); 345 346 f30->ctrl_regs_size = ctrl_reg - 347 f30->ctrl_regs ?: RMI_F30_CTRL_REGS_MAX_SIZE; 348 349 error = rmi_f30_read_control_parameters(fn, f30); 350 if (error) { 351 dev_err(&fn->dev, 352 "Failed to initialize F30 control params: %d\n", 353 error); 354 return error; 355 } 356 357 if (f30->has_gpio) { 358 error = rmi_f30_map_gpios(fn, f30); 359 if (error) 360 return error; 361 } 362 363 return 0; 364 } 365 366 static int rmi_f30_probe(struct rmi_function *fn) 367 { 368 struct rmi_device *rmi_dev = fn->rmi_dev; 369 const struct rmi_device_platform_data *pdata = 370 rmi_get_platform_data(rmi_dev); 371 struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev); 372 struct f30_data *f30; 373 int error; 374 375 if (pdata->gpio_data.disable) 376 return 0; 377 378 if (!drv_data->input) { 379 dev_info(&fn->dev, "F30: no input device found, ignoring\n"); 380 return -ENXIO; 381 } 382 383 f30 = devm_kzalloc(&fn->dev, sizeof(*f30), GFP_KERNEL); 384 if (!f30) 385 return -ENOMEM; 386 387 f30->input = drv_data->input; 388 389 error = rmi_f30_initialize(fn, f30); 390 if (error) 391 return error; 392 393 dev_set_drvdata(&fn->dev, f30); 394 return 0; 395 } 396 397 struct rmi_function_handler rmi_f30_handler = { 398 .driver = { 399 .name = "rmi4_f30", 400 }, 401 .func = 0x30, 402 .probe = rmi_f30_probe, 403 .config = rmi_f30_config, 404 .attention = rmi_f30_attention, 405 }; 406