1 /* 2 * IBM TrackPoint PS/2 mouse driver 3 * 4 * Stephen Evanchik <evanchsa@gmail.com> 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License version 2 as published by 8 * the Free Software Foundation. 9 */ 10 11 #ifndef _TRACKPOINT_H 12 #define _TRACKPOINT_H 13 14 /* 15 * These constants are from the TrackPoint System 16 * Engineering documentation Version 4 from IBM Watson 17 * research: 18 * http://wwwcssrv.almaden.ibm.com/trackpoint/download.html 19 */ 20 21 #define TP_COMMAND 0xE2 /* Commands start with this */ 22 23 #define TP_READ_ID 0xE1 /* Sent for device identification */ 24 25 /* 26 * Valid first byte responses to the "Read Secondary ID" (0xE1) command. 27 * 0x01 was the original IBM trackpoint, others implement very limited 28 * subset of trackpoint features. 29 */ 30 #define TP_VARIANT_IBM 0x01 31 #define TP_VARIANT_ALPS 0x02 32 #define TP_VARIANT_ELAN 0x03 33 #define TP_VARIANT_NXP 0x04 34 35 /* 36 * Commands 37 */ 38 #define TP_RECALIB 0x51 /* Recalibrate */ 39 #define TP_POWER_DOWN 0x44 /* Can only be undone through HW reset */ 40 #define TP_EXT_DEV 0x21 /* Determines if external device is connected (RO) */ 41 #define TP_EXT_BTN 0x4B /* Read extended button status */ 42 #define TP_POR 0x7F /* Execute Power on Reset */ 43 #define TP_POR_RESULTS 0x25 /* Read Power on Self test results */ 44 #define TP_DISABLE_EXT 0x40 /* Disable external pointing device */ 45 #define TP_ENABLE_EXT 0x41 /* Enable external pointing device */ 46 47 /* 48 * Mode manipulation 49 */ 50 #define TP_SET_SOFT_TRANS 0x4E /* Set mode */ 51 #define TP_CANCEL_SOFT_TRANS 0xB9 /* Cancel mode */ 52 #define TP_SET_HARD_TRANS 0x45 /* Mode can only be set */ 53 54 55 /* 56 * Register oriented commands/properties 57 */ 58 #define TP_WRITE_MEM 0x81 59 #define TP_READ_MEM 0x80 /* Not used in this implementation */ 60 61 /* 62 * RAM Locations for properties 63 */ 64 #define TP_SENS 0x4A /* Sensitivity */ 65 #define TP_MB 0x4C /* Read Middle Button Status (RO) */ 66 #define TP_INERTIA 0x4D /* Negative Inertia */ 67 #define TP_SPEED 0x60 /* Speed of TP Cursor */ 68 #define TP_REACH 0x57 /* Backup for Z-axis press */ 69 #define TP_DRAGHYS 0x58 /* Drag Hysteresis */ 70 /* (how hard it is to drag */ 71 /* with Z-axis pressed) */ 72 73 #define TP_MINDRAG 0x59 /* Minimum amount of force needed */ 74 /* to trigger dragging */ 75 76 #define TP_THRESH 0x5C /* Minimum value for a Z-axis press */ 77 #define TP_UP_THRESH 0x5A /* Used to generate a 'click' on Z-axis */ 78 #define TP_Z_TIME 0x5E /* How sharp of a press */ 79 #define TP_JENKS_CURV 0x5D /* Minimum curvature for double click */ 80 #define TP_DRIFT_TIME 0x5F /* How long a 'hands off' condition */ 81 /* must last (x*107ms) for drift */ 82 /* correction to occur */ 83 84 /* 85 * Toggling Flag bits 86 */ 87 #define TP_TOGGLE 0x47 /* Toggle command */ 88 89 #define TP_TOGGLE_MB 0x23 /* Disable/Enable Middle Button */ 90 #define TP_MASK_MB 0x01 91 #define TP_TOGGLE_EXT_DEV 0x23 /* Disable external device */ 92 #define TP_MASK_EXT_DEV 0x02 93 #define TP_TOGGLE_DRIFT 0x23 /* Drift Correction */ 94 #define TP_MASK_DRIFT 0x80 95 #define TP_TOGGLE_BURST 0x28 /* Burst Mode */ 96 #define TP_MASK_BURST 0x80 97 #define TP_TOGGLE_PTSON 0x2C /* Press to Select */ 98 #define TP_MASK_PTSON 0x01 99 #define TP_TOGGLE_HARD_TRANS 0x2C /* Alternate method to set Hard Transparency */ 100 #define TP_MASK_HARD_TRANS 0x80 101 #define TP_TOGGLE_TWOHAND 0x2D /* Two handed */ 102 #define TP_MASK_TWOHAND 0x01 103 #define TP_TOGGLE_STICKY_TWO 0x2D /* Sticky two handed */ 104 #define TP_MASK_STICKY_TWO 0x04 105 #define TP_TOGGLE_SKIPBACK 0x2D /* Suppress movement after drag release */ 106 #define TP_MASK_SKIPBACK 0x08 107 #define TP_TOGGLE_SOURCE_TAG 0x20 /* Bit 3 of the first packet will be set to 108 to the origin of the packet (external or TP) */ 109 #define TP_MASK_SOURCE_TAG 0x80 110 #define TP_TOGGLE_EXT_TAG 0x22 /* Bit 3 of the first packet coming from the 111 external device will be forced to 1 */ 112 #define TP_MASK_EXT_TAG 0x04 113 114 115 /* Power on Self Test Results */ 116 #define TP_POR_SUCCESS 0x3B 117 118 /* 119 * Default power on values 120 */ 121 #define TP_DEF_SENS 0x80 122 #define TP_DEF_INERTIA 0x06 123 #define TP_DEF_SPEED 0x61 124 #define TP_DEF_REACH 0x0A 125 126 #define TP_DEF_DRAGHYS 0xFF 127 #define TP_DEF_MINDRAG 0x14 128 129 #define TP_DEF_THRESH 0x08 130 #define TP_DEF_UP_THRESH 0xFF 131 #define TP_DEF_Z_TIME 0x26 132 #define TP_DEF_JENKS_CURV 0x87 133 #define TP_DEF_DRIFT_TIME 0x05 134 135 /* Toggles */ 136 #define TP_DEF_MB 0x00 137 #define TP_DEF_PTSON 0x00 138 #define TP_DEF_SKIPBACK 0x00 139 #define TP_DEF_EXT_DEV 0x00 /* 0 means enabled */ 140 #define TP_DEF_TWOHAND 0x00 141 #define TP_DEF_SOURCE_TAG 0x00 142 143 #define MAKE_PS2_CMD(params, results, cmd) ((params<<12) | (results<<8) | (cmd)) 144 145 struct trackpoint_data { 146 u8 variant_id; 147 u8 firmware_id; 148 149 u8 sensitivity, speed, inertia, reach; 150 u8 draghys, mindrag; 151 u8 thresh, upthresh; 152 u8 ztime, jenks; 153 u8 drift_time; 154 155 /* toggles */ 156 bool press_to_select; 157 bool skipback; 158 bool ext_dev; 159 }; 160 161 #ifdef CONFIG_MOUSE_PS2_TRACKPOINT 162 int trackpoint_detect(struct psmouse *psmouse, bool set_properties); 163 #else 164 inline int trackpoint_detect(struct psmouse *psmouse, bool set_properties) 165 { 166 return -ENOSYS; 167 } 168 #endif /* CONFIG_MOUSE_PS2_TRACKPOINT */ 169 170 #endif /* _TRACKPOINT_H */ 171