1 /* 2 * Synaptics touchpad with I2C interface 3 * 4 * Copyright (C) 2009 Compulab, Ltd. 5 * Mike Rapoport <mike@compulab.co.il> 6 * Igor Grinberg <grinberg@compulab.co.il> 7 * 8 * This file is subject to the terms and conditions of the GNU General Public 9 * License. See the file COPYING in the main directory of this archive for 10 * more details. 11 */ 12 13 #include <linux/module.h> 14 #include <linux/i2c.h> 15 #include <linux/irq.h> 16 #include <linux/interrupt.h> 17 #include <linux/input.h> 18 #include <linux/delay.h> 19 #include <linux/workqueue.h> 20 #include <linux/slab.h> 21 #include <linux/pm.h> 22 23 #define DRIVER_NAME "synaptics_i2c" 24 /* maximum product id is 15 characters */ 25 #define PRODUCT_ID_LENGTH 15 26 #define REGISTER_LENGTH 8 27 28 /* 29 * after soft reset, we should wait for 1 ms 30 * before the device becomes operational 31 */ 32 #define SOFT_RESET_DELAY_US 3000 33 /* and after hard reset, we should wait for max 500ms */ 34 #define HARD_RESET_DELAY_MS 500 35 36 /* Registers by SMBus address */ 37 #define PAGE_SEL_REG 0xff 38 #define DEVICE_STATUS_REG 0x09 39 40 /* Registers by RMI address */ 41 #define DEV_CONTROL_REG 0x0000 42 #define INTERRUPT_EN_REG 0x0001 43 #define ERR_STAT_REG 0x0002 44 #define INT_REQ_STAT_REG 0x0003 45 #define DEV_COMMAND_REG 0x0004 46 47 #define RMI_PROT_VER_REG 0x0200 48 #define MANUFACT_ID_REG 0x0201 49 #define PHYS_INT_VER_REG 0x0202 50 #define PROD_PROPERTY_REG 0x0203 51 #define INFO_QUERY_REG0 0x0204 52 #define INFO_QUERY_REG1 (INFO_QUERY_REG0 + 1) 53 #define INFO_QUERY_REG2 (INFO_QUERY_REG0 + 2) 54 #define INFO_QUERY_REG3 (INFO_QUERY_REG0 + 3) 55 56 #define PRODUCT_ID_REG0 0x0210 57 #define PRODUCT_ID_REG1 (PRODUCT_ID_REG0 + 1) 58 #define PRODUCT_ID_REG2 (PRODUCT_ID_REG0 + 2) 59 #define PRODUCT_ID_REG3 (PRODUCT_ID_REG0 + 3) 60 #define PRODUCT_ID_REG4 (PRODUCT_ID_REG0 + 4) 61 #define PRODUCT_ID_REG5 (PRODUCT_ID_REG0 + 5) 62 #define PRODUCT_ID_REG6 (PRODUCT_ID_REG0 + 6) 63 #define PRODUCT_ID_REG7 (PRODUCT_ID_REG0 + 7) 64 #define PRODUCT_ID_REG8 (PRODUCT_ID_REG0 + 8) 65 #define PRODUCT_ID_REG9 (PRODUCT_ID_REG0 + 9) 66 #define PRODUCT_ID_REG10 (PRODUCT_ID_REG0 + 10) 67 #define PRODUCT_ID_REG11 (PRODUCT_ID_REG0 + 11) 68 #define PRODUCT_ID_REG12 (PRODUCT_ID_REG0 + 12) 69 #define PRODUCT_ID_REG13 (PRODUCT_ID_REG0 + 13) 70 #define PRODUCT_ID_REG14 (PRODUCT_ID_REG0 + 14) 71 #define PRODUCT_ID_REG15 (PRODUCT_ID_REG0 + 15) 72 73 #define DATA_REG0 0x0400 74 #define ABS_PRESSURE_REG 0x0401 75 #define ABS_MSB_X_REG 0x0402 76 #define ABS_LSB_X_REG (ABS_MSB_X_REG + 1) 77 #define ABS_MSB_Y_REG 0x0404 78 #define ABS_LSB_Y_REG (ABS_MSB_Y_REG + 1) 79 #define REL_X_REG 0x0406 80 #define REL_Y_REG 0x0407 81 82 #define DEV_QUERY_REG0 0x1000 83 #define DEV_QUERY_REG1 (DEV_QUERY_REG0 + 1) 84 #define DEV_QUERY_REG2 (DEV_QUERY_REG0 + 2) 85 #define DEV_QUERY_REG3 (DEV_QUERY_REG0 + 3) 86 #define DEV_QUERY_REG4 (DEV_QUERY_REG0 + 4) 87 #define DEV_QUERY_REG5 (DEV_QUERY_REG0 + 5) 88 #define DEV_QUERY_REG6 (DEV_QUERY_REG0 + 6) 89 #define DEV_QUERY_REG7 (DEV_QUERY_REG0 + 7) 90 #define DEV_QUERY_REG8 (DEV_QUERY_REG0 + 8) 91 92 #define GENERAL_2D_CONTROL_REG 0x1041 93 #define SENSOR_SENSITIVITY_REG 0x1044 94 #define SENS_MAX_POS_MSB_REG 0x1046 95 #define SENS_MAX_POS_LSB_REG (SENS_MAX_POS_UPPER_REG + 1) 96 97 /* Register bits */ 98 /* Device Control Register Bits */ 99 #define REPORT_RATE_1ST_BIT 6 100 101 /* Interrupt Enable Register Bits (INTERRUPT_EN_REG) */ 102 #define F10_ABS_INT_ENA 0 103 #define F10_REL_INT_ENA 1 104 #define F20_INT_ENA 2 105 106 /* Interrupt Request Register Bits (INT_REQ_STAT_REG | DEVICE_STATUS_REG) */ 107 #define F10_ABS_INT_REQ 0 108 #define F10_REL_INT_REQ 1 109 #define F20_INT_REQ 2 110 /* Device Status Register Bits (DEVICE_STATUS_REG) */ 111 #define STAT_CONFIGURED 6 112 #define STAT_ERROR 7 113 114 /* Device Command Register Bits (DEV_COMMAND_REG) */ 115 #define RESET_COMMAND 0x01 116 #define REZERO_COMMAND 0x02 117 118 /* Data Register 0 Bits (DATA_REG0) */ 119 #define GESTURE 3 120 121 /* Device Query Registers Bits */ 122 /* DEV_QUERY_REG3 */ 123 #define HAS_PALM_DETECT 1 124 #define HAS_MULTI_FING 2 125 #define HAS_SCROLLER 4 126 #define HAS_2D_SCROLL 5 127 128 /* General 2D Control Register Bits (GENERAL_2D_CONTROL_REG) */ 129 #define NO_DECELERATION 1 130 #define REDUCE_REPORTING 3 131 #define NO_FILTER 5 132 133 /* Function Masks */ 134 /* Device Control Register Masks (DEV_CONTROL_REG) */ 135 #define REPORT_RATE_MSK 0xc0 136 #define SLEEP_MODE_MSK 0x07 137 138 /* Device Sleep Modes */ 139 #define FULL_AWAKE 0x0 140 #define NORMAL_OP 0x1 141 #define LOW_PWR_OP 0x2 142 #define VERY_LOW_PWR_OP 0x3 143 #define SENS_SLEEP 0x4 144 #define SLEEP_MOD 0x5 145 #define DEEP_SLEEP 0x6 146 #define HIBERNATE 0x7 147 148 /* Interrupt Register Mask */ 149 /* (INT_REQ_STAT_REG | DEVICE_STATUS_REG | INTERRUPT_EN_REG) */ 150 #define INT_ENA_REQ_MSK 0x07 151 #define INT_ENA_ABS_MSK 0x01 152 #define INT_ENA_REL_MSK 0x02 153 #define INT_ENA_F20_MSK 0x04 154 155 /* Device Status Register Masks (DEVICE_STATUS_REG) */ 156 #define CONFIGURED_MSK 0x40 157 #define ERROR_MSK 0x80 158 159 /* Data Register 0 Masks */ 160 #define FINGER_WIDTH_MSK 0xf0 161 #define GESTURE_MSK 0x08 162 #define SENSOR_STATUS_MSK 0x07 163 164 /* 165 * MSB Position Register Masks 166 * ABS_MSB_X_REG | ABS_MSB_Y_REG | SENS_MAX_POS_MSB_REG | 167 * DEV_QUERY_REG3 | DEV_QUERY_REG5 168 */ 169 #define MSB_POSITION_MSK 0x1f 170 171 /* Device Query Registers Masks */ 172 173 /* DEV_QUERY_REG2 */ 174 #define NUM_EXTRA_POS_MSK 0x07 175 176 /* When in IRQ mode read the device every THREAD_IRQ_SLEEP_SECS */ 177 #define THREAD_IRQ_SLEEP_SECS 2 178 #define THREAD_IRQ_SLEEP_MSECS (THREAD_IRQ_SLEEP_SECS * MSEC_PER_SEC) 179 180 /* 181 * When in Polling mode and no data received for NO_DATA_THRES msecs 182 * reduce the polling rate to NO_DATA_SLEEP_MSECS 183 */ 184 #define NO_DATA_THRES (MSEC_PER_SEC) 185 #define NO_DATA_SLEEP_MSECS (MSEC_PER_SEC / 4) 186 187 /* Control touchpad's No Deceleration option */ 188 static bool no_decel = true; 189 module_param(no_decel, bool, 0644); 190 MODULE_PARM_DESC(no_decel, "No Deceleration. Default = 1 (on)"); 191 192 /* Control touchpad's Reduced Reporting option */ 193 static bool reduce_report; 194 module_param(reduce_report, bool, 0644); 195 MODULE_PARM_DESC(reduce_report, "Reduced Reporting. Default = 0 (off)"); 196 197 /* Control touchpad's No Filter option */ 198 static bool no_filter; 199 module_param(no_filter, bool, 0644); 200 MODULE_PARM_DESC(no_filter, "No Filter. Default = 0 (off)"); 201 202 /* 203 * touchpad Attention line is Active Low and Open Drain, 204 * therefore should be connected to pulled up line 205 * and the irq configuration should be set to Falling Edge Trigger 206 */ 207 /* Control IRQ / Polling option */ 208 static bool polling_req; 209 module_param(polling_req, bool, 0444); 210 MODULE_PARM_DESC(polling_req, "Request Polling. Default = 0 (use irq)"); 211 212 /* Control Polling Rate */ 213 static int scan_rate = 80; 214 module_param(scan_rate, int, 0644); 215 MODULE_PARM_DESC(scan_rate, "Polling rate in times/sec. Default = 80"); 216 217 /* The main device structure */ 218 struct synaptics_i2c { 219 struct i2c_client *client; 220 struct input_dev *input; 221 struct delayed_work dwork; 222 int no_data_count; 223 int no_decel_param; 224 int reduce_report_param; 225 int no_filter_param; 226 int scan_rate_param; 227 int scan_ms; 228 }; 229 230 static inline void set_scan_rate(struct synaptics_i2c *touch, int scan_rate) 231 { 232 touch->scan_ms = MSEC_PER_SEC / scan_rate; 233 touch->scan_rate_param = scan_rate; 234 } 235 236 /* 237 * Driver's initial design makes no race condition possible on i2c bus, 238 * so there is no need in any locking. 239 * Keep it in mind, while playing with the code. 240 */ 241 static s32 synaptics_i2c_reg_get(struct i2c_client *client, u16 reg) 242 { 243 int ret; 244 245 ret = i2c_smbus_write_byte_data(client, PAGE_SEL_REG, reg >> 8); 246 if (ret == 0) 247 ret = i2c_smbus_read_byte_data(client, reg & 0xff); 248 249 return ret; 250 } 251 252 static s32 synaptics_i2c_reg_set(struct i2c_client *client, u16 reg, u8 val) 253 { 254 int ret; 255 256 ret = i2c_smbus_write_byte_data(client, PAGE_SEL_REG, reg >> 8); 257 if (ret == 0) 258 ret = i2c_smbus_write_byte_data(client, reg & 0xff, val); 259 260 return ret; 261 } 262 263 static s32 synaptics_i2c_word_get(struct i2c_client *client, u16 reg) 264 { 265 int ret; 266 267 ret = i2c_smbus_write_byte_data(client, PAGE_SEL_REG, reg >> 8); 268 if (ret == 0) 269 ret = i2c_smbus_read_word_data(client, reg & 0xff); 270 271 return ret; 272 } 273 274 static int synaptics_i2c_config(struct i2c_client *client) 275 { 276 int ret, control; 277 u8 int_en; 278 279 /* set Report Rate to Device Highest (>=80) and Sleep to normal */ 280 ret = synaptics_i2c_reg_set(client, DEV_CONTROL_REG, 0xc1); 281 if (ret) 282 return ret; 283 284 /* set Interrupt Disable to Func20 / Enable to Func10) */ 285 int_en = (polling_req) ? 0 : INT_ENA_ABS_MSK | INT_ENA_REL_MSK; 286 ret = synaptics_i2c_reg_set(client, INTERRUPT_EN_REG, int_en); 287 if (ret) 288 return ret; 289 290 control = synaptics_i2c_reg_get(client, GENERAL_2D_CONTROL_REG); 291 /* No Deceleration */ 292 control |= no_decel ? 1 << NO_DECELERATION : 0; 293 /* Reduced Reporting */ 294 control |= reduce_report ? 1 << REDUCE_REPORTING : 0; 295 /* No Filter */ 296 control |= no_filter ? 1 << NO_FILTER : 0; 297 ret = synaptics_i2c_reg_set(client, GENERAL_2D_CONTROL_REG, control); 298 if (ret) 299 return ret; 300 301 return 0; 302 } 303 304 static int synaptics_i2c_reset_config(struct i2c_client *client) 305 { 306 int ret; 307 308 /* Reset the Touchpad */ 309 ret = synaptics_i2c_reg_set(client, DEV_COMMAND_REG, RESET_COMMAND); 310 if (ret) { 311 dev_err(&client->dev, "Unable to reset device\n"); 312 } else { 313 usleep_range(SOFT_RESET_DELAY_US, SOFT_RESET_DELAY_US + 100); 314 ret = synaptics_i2c_config(client); 315 if (ret) 316 dev_err(&client->dev, "Unable to config device\n"); 317 } 318 319 return ret; 320 } 321 322 static int synaptics_i2c_check_error(struct i2c_client *client) 323 { 324 int status, ret = 0; 325 326 status = i2c_smbus_read_byte_data(client, DEVICE_STATUS_REG) & 327 (CONFIGURED_MSK | ERROR_MSK); 328 329 if (status != CONFIGURED_MSK) 330 ret = synaptics_i2c_reset_config(client); 331 332 return ret; 333 } 334 335 static bool synaptics_i2c_get_input(struct synaptics_i2c *touch) 336 { 337 struct input_dev *input = touch->input; 338 int xy_delta, gesture; 339 s32 data; 340 s8 x_delta, y_delta; 341 342 /* Deal with spontaneous resets and errors */ 343 if (synaptics_i2c_check_error(touch->client)) 344 return false; 345 346 /* Get Gesture Bit */ 347 data = synaptics_i2c_reg_get(touch->client, DATA_REG0); 348 gesture = (data >> GESTURE) & 0x1; 349 350 /* 351 * Get Relative axes. we have to get them in one shot, 352 * so we get 2 bytes starting from REL_X_REG. 353 */ 354 xy_delta = synaptics_i2c_word_get(touch->client, REL_X_REG) & 0xffff; 355 356 /* Separate X from Y */ 357 x_delta = xy_delta & 0xff; 358 y_delta = (xy_delta >> REGISTER_LENGTH) & 0xff; 359 360 /* Report the button event */ 361 input_report_key(input, BTN_LEFT, gesture); 362 363 /* Report the deltas */ 364 input_report_rel(input, REL_X, x_delta); 365 input_report_rel(input, REL_Y, -y_delta); 366 input_sync(input); 367 368 return xy_delta || gesture; 369 } 370 371 static irqreturn_t synaptics_i2c_irq(int irq, void *dev_id) 372 { 373 struct synaptics_i2c *touch = dev_id; 374 375 mod_delayed_work(system_wq, &touch->dwork, 0); 376 377 return IRQ_HANDLED; 378 } 379 380 static void synaptics_i2c_check_params(struct synaptics_i2c *touch) 381 { 382 bool reset = false; 383 384 if (scan_rate != touch->scan_rate_param) 385 set_scan_rate(touch, scan_rate); 386 387 if (no_decel != touch->no_decel_param) { 388 touch->no_decel_param = no_decel; 389 reset = true; 390 } 391 392 if (no_filter != touch->no_filter_param) { 393 touch->no_filter_param = no_filter; 394 reset = true; 395 } 396 397 if (reduce_report != touch->reduce_report_param) { 398 touch->reduce_report_param = reduce_report; 399 reset = true; 400 } 401 402 if (reset) 403 synaptics_i2c_reset_config(touch->client); 404 } 405 406 /* Control the Device polling rate / Work Handler sleep time */ 407 static unsigned long synaptics_i2c_adjust_delay(struct synaptics_i2c *touch, 408 bool have_data) 409 { 410 unsigned long delay, nodata_count_thres; 411 412 if (polling_req) { 413 delay = touch->scan_ms; 414 if (have_data) { 415 touch->no_data_count = 0; 416 } else { 417 nodata_count_thres = NO_DATA_THRES / touch->scan_ms; 418 if (touch->no_data_count < nodata_count_thres) 419 touch->no_data_count++; 420 else 421 delay = NO_DATA_SLEEP_MSECS; 422 } 423 return msecs_to_jiffies(delay); 424 } else { 425 delay = msecs_to_jiffies(THREAD_IRQ_SLEEP_MSECS); 426 return round_jiffies_relative(delay); 427 } 428 } 429 430 /* Work Handler */ 431 static void synaptics_i2c_work_handler(struct work_struct *work) 432 { 433 bool have_data; 434 struct synaptics_i2c *touch = 435 container_of(work, struct synaptics_i2c, dwork.work); 436 unsigned long delay; 437 438 synaptics_i2c_check_params(touch); 439 440 have_data = synaptics_i2c_get_input(touch); 441 delay = synaptics_i2c_adjust_delay(touch, have_data); 442 443 /* 444 * While interrupt driven, there is no real need to poll the device. 445 * But touchpads are very sensitive, so there could be errors 446 * related to physical environment and the attention line isn't 447 * necessarily asserted. In such case we can lose the touchpad. 448 * We poll the device once in THREAD_IRQ_SLEEP_SECS and 449 * if error is detected, we try to reset and reconfigure the touchpad. 450 */ 451 mod_delayed_work(system_wq, &touch->dwork, delay); 452 } 453 454 static int synaptics_i2c_open(struct input_dev *input) 455 { 456 struct synaptics_i2c *touch = input_get_drvdata(input); 457 int ret; 458 459 ret = synaptics_i2c_reset_config(touch->client); 460 if (ret) 461 return ret; 462 463 if (polling_req) 464 mod_delayed_work(system_wq, &touch->dwork, 465 msecs_to_jiffies(NO_DATA_SLEEP_MSECS)); 466 467 return 0; 468 } 469 470 static void synaptics_i2c_close(struct input_dev *input) 471 { 472 struct synaptics_i2c *touch = input_get_drvdata(input); 473 474 if (!polling_req) 475 synaptics_i2c_reg_set(touch->client, INTERRUPT_EN_REG, 0); 476 477 cancel_delayed_work_sync(&touch->dwork); 478 479 /* Save some power */ 480 synaptics_i2c_reg_set(touch->client, DEV_CONTROL_REG, DEEP_SLEEP); 481 } 482 483 static void synaptics_i2c_set_input_params(struct synaptics_i2c *touch) 484 { 485 struct input_dev *input = touch->input; 486 487 input->name = touch->client->name; 488 input->phys = touch->client->adapter->name; 489 input->id.bustype = BUS_I2C; 490 input->id.version = synaptics_i2c_word_get(touch->client, 491 INFO_QUERY_REG0); 492 input->dev.parent = &touch->client->dev; 493 input->open = synaptics_i2c_open; 494 input->close = synaptics_i2c_close; 495 input_set_drvdata(input, touch); 496 497 /* Register the device as mouse */ 498 __set_bit(EV_REL, input->evbit); 499 __set_bit(REL_X, input->relbit); 500 __set_bit(REL_Y, input->relbit); 501 502 /* Register device's buttons and keys */ 503 __set_bit(EV_KEY, input->evbit); 504 __set_bit(BTN_LEFT, input->keybit); 505 } 506 507 static struct synaptics_i2c *synaptics_i2c_touch_create(struct i2c_client *client) 508 { 509 struct synaptics_i2c *touch; 510 511 touch = kzalloc(sizeof(struct synaptics_i2c), GFP_KERNEL); 512 if (!touch) 513 return NULL; 514 515 touch->client = client; 516 touch->no_decel_param = no_decel; 517 touch->scan_rate_param = scan_rate; 518 set_scan_rate(touch, scan_rate); 519 INIT_DELAYED_WORK(&touch->dwork, synaptics_i2c_work_handler); 520 521 return touch; 522 } 523 524 static int synaptics_i2c_probe(struct i2c_client *client) 525 { 526 int ret; 527 struct synaptics_i2c *touch; 528 529 touch = synaptics_i2c_touch_create(client); 530 if (!touch) 531 return -ENOMEM; 532 533 ret = synaptics_i2c_reset_config(client); 534 if (ret) 535 goto err_mem_free; 536 537 if (client->irq < 1) 538 polling_req = true; 539 540 touch->input = input_allocate_device(); 541 if (!touch->input) { 542 ret = -ENOMEM; 543 goto err_mem_free; 544 } 545 546 synaptics_i2c_set_input_params(touch); 547 548 if (!polling_req) { 549 dev_dbg(&touch->client->dev, 550 "Requesting IRQ: %d\n", touch->client->irq); 551 552 ret = request_irq(touch->client->irq, synaptics_i2c_irq, 553 IRQ_TYPE_EDGE_FALLING, 554 DRIVER_NAME, touch); 555 if (ret) { 556 dev_warn(&touch->client->dev, 557 "IRQ request failed: %d, " 558 "falling back to polling\n", ret); 559 polling_req = true; 560 synaptics_i2c_reg_set(touch->client, 561 INTERRUPT_EN_REG, 0); 562 } 563 } 564 565 if (polling_req) 566 dev_dbg(&touch->client->dev, 567 "Using polling at rate: %d times/sec\n", scan_rate); 568 569 /* Register the device in input subsystem */ 570 ret = input_register_device(touch->input); 571 if (ret) { 572 dev_err(&client->dev, 573 "Input device register failed: %d\n", ret); 574 goto err_input_free; 575 } 576 577 i2c_set_clientdata(client, touch); 578 579 return 0; 580 581 err_input_free: 582 input_free_device(touch->input); 583 err_mem_free: 584 kfree(touch); 585 586 return ret; 587 } 588 589 static void synaptics_i2c_remove(struct i2c_client *client) 590 { 591 struct synaptics_i2c *touch = i2c_get_clientdata(client); 592 593 if (!polling_req) 594 free_irq(client->irq, touch); 595 596 input_unregister_device(touch->input); 597 kfree(touch); 598 } 599 600 static int __maybe_unused synaptics_i2c_suspend(struct device *dev) 601 { 602 struct i2c_client *client = to_i2c_client(dev); 603 struct synaptics_i2c *touch = i2c_get_clientdata(client); 604 605 cancel_delayed_work_sync(&touch->dwork); 606 607 /* Save some power */ 608 synaptics_i2c_reg_set(touch->client, DEV_CONTROL_REG, DEEP_SLEEP); 609 610 return 0; 611 } 612 613 static int __maybe_unused synaptics_i2c_resume(struct device *dev) 614 { 615 int ret; 616 struct i2c_client *client = to_i2c_client(dev); 617 struct synaptics_i2c *touch = i2c_get_clientdata(client); 618 619 ret = synaptics_i2c_reset_config(client); 620 if (ret) 621 return ret; 622 623 mod_delayed_work(system_wq, &touch->dwork, 624 msecs_to_jiffies(NO_DATA_SLEEP_MSECS)); 625 626 return 0; 627 } 628 629 static SIMPLE_DEV_PM_OPS(synaptics_i2c_pm, synaptics_i2c_suspend, 630 synaptics_i2c_resume); 631 632 static const struct i2c_device_id synaptics_i2c_id_table[] = { 633 { "synaptics_i2c", 0 }, 634 { }, 635 }; 636 MODULE_DEVICE_TABLE(i2c, synaptics_i2c_id_table); 637 638 #ifdef CONFIG_OF 639 static const struct of_device_id synaptics_i2c_of_match[] = { 640 { .compatible = "synaptics,synaptics_i2c", }, 641 { }, 642 }; 643 MODULE_DEVICE_TABLE(of, synaptics_i2c_of_match); 644 #endif 645 646 static struct i2c_driver synaptics_i2c_driver = { 647 .driver = { 648 .name = DRIVER_NAME, 649 .of_match_table = of_match_ptr(synaptics_i2c_of_match), 650 .pm = &synaptics_i2c_pm, 651 }, 652 653 .probe_new = synaptics_i2c_probe, 654 .remove = synaptics_i2c_remove, 655 656 .id_table = synaptics_i2c_id_table, 657 }; 658 659 module_i2c_driver(synaptics_i2c_driver); 660 661 MODULE_DESCRIPTION("Synaptics I2C touchpad driver"); 662 MODULE_AUTHOR("Mike Rapoport, Igor Grinberg, Compulab"); 663 MODULE_LICENSE("GPL"); 664 665