1 /* 2 * $Id: logibm.c,v 1.11 2001/09/25 10:12:07 vojtech Exp $ 3 * 4 * Copyright (c) 1999-2001 Vojtech Pavlik 5 * 6 * Based on the work of: 7 * James Banks Matthew Dillon 8 * David Giller Nathan Laredo 9 * Linus Torvalds Johan Myreen 10 * Cliff Matthews Philip Blundell 11 * Russell King 12 */ 13 14 /* 15 * Logitech Bus Mouse Driver for Linux 16 */ 17 18 /* 19 * This program is free software; you can redistribute it and/or modify 20 * it under the terms of the GNU General Public License as published by 21 * the Free Software Foundation; either version 2 of the License, or 22 * (at your option) any later version. 23 * 24 * This program is distributed in the hope that it will be useful, 25 * but WITHOUT ANY WARRANTY; without even the implied warranty of 26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 27 * GNU General Public License for more details. 28 * 29 * You should have received a copy of the GNU General Public License 30 * along with this program; if not, write to the Free Software 31 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 32 * 33 * Should you need to contact me, the author, you can do so either by 34 * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: 35 * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic 36 */ 37 38 #include <linux/module.h> 39 #include <linux/moduleparam.h> 40 #include <linux/delay.h> 41 #include <linux/ioport.h> 42 #include <linux/init.h> 43 #include <linux/input.h> 44 #include <linux/interrupt.h> 45 46 #include <asm/io.h> 47 #include <asm/irq.h> 48 49 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); 50 MODULE_DESCRIPTION("Logitech busmouse driver"); 51 MODULE_LICENSE("GPL"); 52 53 #define LOGIBM_BASE 0x23c 54 #define LOGIBM_EXTENT 4 55 56 #define LOGIBM_DATA_PORT LOGIBM_BASE + 0 57 #define LOGIBM_SIGNATURE_PORT LOGIBM_BASE + 1 58 #define LOGIBM_CONTROL_PORT LOGIBM_BASE + 2 59 #define LOGIBM_CONFIG_PORT LOGIBM_BASE + 3 60 61 #define LOGIBM_ENABLE_IRQ 0x00 62 #define LOGIBM_DISABLE_IRQ 0x10 63 #define LOGIBM_READ_X_LOW 0x80 64 #define LOGIBM_READ_X_HIGH 0xa0 65 #define LOGIBM_READ_Y_LOW 0xc0 66 #define LOGIBM_READ_Y_HIGH 0xe0 67 68 #define LOGIBM_DEFAULT_MODE 0x90 69 #define LOGIBM_CONFIG_BYTE 0x91 70 #define LOGIBM_SIGNATURE_BYTE 0xa5 71 72 #define LOGIBM_IRQ 5 73 74 static int logibm_irq = LOGIBM_IRQ; 75 module_param_named(irq, logibm_irq, uint, 0); 76 MODULE_PARM_DESC(irq, "IRQ number (5=default)"); 77 78 __obsolete_setup("logibm_irq="); 79 80 static int logibm_used = 0; 81 82 static irqreturn_t logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs); 83 84 static int logibm_open(struct input_dev *dev) 85 { 86 if (logibm_used++) 87 return 0; 88 if (request_irq(logibm_irq, logibm_interrupt, 0, "logibm", NULL)) { 89 logibm_used--; 90 printk(KERN_ERR "logibm.c: Can't allocate irq %d\n", logibm_irq); 91 return -EBUSY; 92 } 93 outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT); 94 return 0; 95 } 96 97 static void logibm_close(struct input_dev *dev) 98 { 99 if (--logibm_used) 100 return; 101 outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT); 102 free_irq(logibm_irq, NULL); 103 } 104 105 static struct input_dev logibm_dev = { 106 .evbit = { BIT(EV_KEY) | BIT(EV_REL) }, 107 .keybit = { [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) }, 108 .relbit = { BIT(REL_X) | BIT(REL_Y) }, 109 .open = logibm_open, 110 .close = logibm_close, 111 .name = "Logitech bus mouse", 112 .phys = "isa023c/input0", 113 .id = { 114 .bustype = BUS_ISA, 115 .vendor = 0x0003, 116 .product = 0x0001, 117 .version = 0x0100, 118 }, 119 }; 120 121 static irqreturn_t logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs) 122 { 123 char dx, dy; 124 unsigned char buttons; 125 126 outb(LOGIBM_READ_X_LOW, LOGIBM_CONTROL_PORT); 127 dx = (inb(LOGIBM_DATA_PORT) & 0xf); 128 outb(LOGIBM_READ_X_HIGH, LOGIBM_CONTROL_PORT); 129 dx |= (inb(LOGIBM_DATA_PORT) & 0xf) << 4; 130 outb(LOGIBM_READ_Y_LOW, LOGIBM_CONTROL_PORT); 131 dy = (inb(LOGIBM_DATA_PORT) & 0xf); 132 outb(LOGIBM_READ_Y_HIGH, LOGIBM_CONTROL_PORT); 133 buttons = inb(LOGIBM_DATA_PORT); 134 dy |= (buttons & 0xf) << 4; 135 buttons = ~buttons >> 5; 136 137 input_regs(&logibm_dev, regs); 138 input_report_rel(&logibm_dev, REL_X, dx); 139 input_report_rel(&logibm_dev, REL_Y, dy); 140 input_report_key(&logibm_dev, BTN_RIGHT, buttons & 1); 141 input_report_key(&logibm_dev, BTN_MIDDLE, buttons & 2); 142 input_report_key(&logibm_dev, BTN_LEFT, buttons & 4); 143 input_sync(&logibm_dev); 144 145 outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT); 146 return IRQ_HANDLED; 147 } 148 149 static int __init logibm_init(void) 150 { 151 if (!request_region(LOGIBM_BASE, LOGIBM_EXTENT, "logibm")) { 152 printk(KERN_ERR "logibm.c: Can't allocate ports at %#x\n", LOGIBM_BASE); 153 return -EBUSY; 154 } 155 156 outb(LOGIBM_CONFIG_BYTE, LOGIBM_CONFIG_PORT); 157 outb(LOGIBM_SIGNATURE_BYTE, LOGIBM_SIGNATURE_PORT); 158 udelay(100); 159 160 if (inb(LOGIBM_SIGNATURE_PORT) != LOGIBM_SIGNATURE_BYTE) { 161 release_region(LOGIBM_BASE, LOGIBM_EXTENT); 162 printk(KERN_ERR "logibm.c: Didn't find Logitech busmouse at %#x\n", LOGIBM_BASE); 163 return -ENODEV; 164 } 165 166 outb(LOGIBM_DEFAULT_MODE, LOGIBM_CONFIG_PORT); 167 outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT); 168 169 input_register_device(&logibm_dev); 170 171 printk(KERN_INFO "input: Logitech bus mouse at %#x irq %d\n", LOGIBM_BASE, logibm_irq); 172 173 return 0; 174 } 175 176 static void __exit logibm_exit(void) 177 { 178 input_unregister_device(&logibm_dev); 179 release_region(LOGIBM_BASE, LOGIBM_EXTENT); 180 } 181 182 module_init(logibm_init); 183 module_exit(logibm_exit); 184