1 /* 2 * $Id: logibm.c,v 1.11 2001/09/25 10:12:07 vojtech Exp $ 3 * 4 * Copyright (c) 1999-2001 Vojtech Pavlik 5 * 6 * Based on the work of: 7 * James Banks Matthew Dillon 8 * David Giller Nathan Laredo 9 * Linus Torvalds Johan Myreen 10 * Cliff Matthews Philip Blundell 11 * Russell King 12 */ 13 14 /* 15 * Logitech Bus Mouse Driver for Linux 16 */ 17 18 /* 19 * This program is free software; you can redistribute it and/or modify 20 * it under the terms of the GNU General Public License as published by 21 * the Free Software Foundation; either version 2 of the License, or 22 * (at your option) any later version. 23 * 24 * This program is distributed in the hope that it will be useful, 25 * but WITHOUT ANY WARRANTY; without even the implied warranty of 26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 27 * GNU General Public License for more details. 28 * 29 * You should have received a copy of the GNU General Public License 30 * along with this program; if not, write to the Free Software 31 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 32 * 33 * Should you need to contact me, the author, you can do so either by 34 * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: 35 * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic 36 */ 37 38 #include <linux/module.h> 39 #include <linux/moduleparam.h> 40 #include <linux/delay.h> 41 #include <linux/ioport.h> 42 #include <linux/init.h> 43 #include <linux/input.h> 44 #include <linux/interrupt.h> 45 46 #include <asm/io.h> 47 #include <asm/irq.h> 48 49 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); 50 MODULE_DESCRIPTION("Logitech busmouse driver"); 51 MODULE_LICENSE("GPL"); 52 53 #define LOGIBM_BASE 0x23c 54 #define LOGIBM_EXTENT 4 55 56 #define LOGIBM_DATA_PORT LOGIBM_BASE + 0 57 #define LOGIBM_SIGNATURE_PORT LOGIBM_BASE + 1 58 #define LOGIBM_CONTROL_PORT LOGIBM_BASE + 2 59 #define LOGIBM_CONFIG_PORT LOGIBM_BASE + 3 60 61 #define LOGIBM_ENABLE_IRQ 0x00 62 #define LOGIBM_DISABLE_IRQ 0x10 63 #define LOGIBM_READ_X_LOW 0x80 64 #define LOGIBM_READ_X_HIGH 0xa0 65 #define LOGIBM_READ_Y_LOW 0xc0 66 #define LOGIBM_READ_Y_HIGH 0xe0 67 68 #define LOGIBM_DEFAULT_MODE 0x90 69 #define LOGIBM_CONFIG_BYTE 0x91 70 #define LOGIBM_SIGNATURE_BYTE 0xa5 71 72 #define LOGIBM_IRQ 5 73 74 static int logibm_irq = LOGIBM_IRQ; 75 module_param_named(irq, logibm_irq, uint, 0); 76 MODULE_PARM_DESC(irq, "IRQ number (5=default)"); 77 78 __obsolete_setup("logibm_irq="); 79 80 static irqreturn_t logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs); 81 82 static int logibm_open(struct input_dev *dev) 83 { 84 if (request_irq(logibm_irq, logibm_interrupt, 0, "logibm", NULL)) { 85 printk(KERN_ERR "logibm.c: Can't allocate irq %d\n", logibm_irq); 86 return -EBUSY; 87 } 88 outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT); 89 return 0; 90 } 91 92 static void logibm_close(struct input_dev *dev) 93 { 94 outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT); 95 free_irq(logibm_irq, NULL); 96 } 97 98 static struct input_dev logibm_dev = { 99 .evbit = { BIT(EV_KEY) | BIT(EV_REL) }, 100 .keybit = { [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) }, 101 .relbit = { BIT(REL_X) | BIT(REL_Y) }, 102 .open = logibm_open, 103 .close = logibm_close, 104 .name = "Logitech bus mouse", 105 .phys = "isa023c/input0", 106 .id = { 107 .bustype = BUS_ISA, 108 .vendor = 0x0003, 109 .product = 0x0001, 110 .version = 0x0100, 111 }, 112 }; 113 114 static irqreturn_t logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs) 115 { 116 char dx, dy; 117 unsigned char buttons; 118 119 outb(LOGIBM_READ_X_LOW, LOGIBM_CONTROL_PORT); 120 dx = (inb(LOGIBM_DATA_PORT) & 0xf); 121 outb(LOGIBM_READ_X_HIGH, LOGIBM_CONTROL_PORT); 122 dx |= (inb(LOGIBM_DATA_PORT) & 0xf) << 4; 123 outb(LOGIBM_READ_Y_LOW, LOGIBM_CONTROL_PORT); 124 dy = (inb(LOGIBM_DATA_PORT) & 0xf); 125 outb(LOGIBM_READ_Y_HIGH, LOGIBM_CONTROL_PORT); 126 buttons = inb(LOGIBM_DATA_PORT); 127 dy |= (buttons & 0xf) << 4; 128 buttons = ~buttons >> 5; 129 130 input_regs(&logibm_dev, regs); 131 input_report_rel(&logibm_dev, REL_X, dx); 132 input_report_rel(&logibm_dev, REL_Y, dy); 133 input_report_key(&logibm_dev, BTN_RIGHT, buttons & 1); 134 input_report_key(&logibm_dev, BTN_MIDDLE, buttons & 2); 135 input_report_key(&logibm_dev, BTN_LEFT, buttons & 4); 136 input_sync(&logibm_dev); 137 138 outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT); 139 return IRQ_HANDLED; 140 } 141 142 static int __init logibm_init(void) 143 { 144 if (!request_region(LOGIBM_BASE, LOGIBM_EXTENT, "logibm")) { 145 printk(KERN_ERR "logibm.c: Can't allocate ports at %#x\n", LOGIBM_BASE); 146 return -EBUSY; 147 } 148 149 outb(LOGIBM_CONFIG_BYTE, LOGIBM_CONFIG_PORT); 150 outb(LOGIBM_SIGNATURE_BYTE, LOGIBM_SIGNATURE_PORT); 151 udelay(100); 152 153 if (inb(LOGIBM_SIGNATURE_PORT) != LOGIBM_SIGNATURE_BYTE) { 154 release_region(LOGIBM_BASE, LOGIBM_EXTENT); 155 printk(KERN_ERR "logibm.c: Didn't find Logitech busmouse at %#x\n", LOGIBM_BASE); 156 return -ENODEV; 157 } 158 159 outb(LOGIBM_DEFAULT_MODE, LOGIBM_CONFIG_PORT); 160 outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT); 161 162 input_register_device(&logibm_dev); 163 164 printk(KERN_INFO "input: Logitech bus mouse at %#x irq %d\n", LOGIBM_BASE, logibm_irq); 165 166 return 0; 167 } 168 169 static void __exit logibm_exit(void) 170 { 171 input_unregister_device(&logibm_dev); 172 release_region(LOGIBM_BASE, LOGIBM_EXTENT); 173 } 174 175 module_init(logibm_init); 176 module_exit(logibm_exit); 177