1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * Elantech Touchpad driver (v6) 4 * 5 * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net> 6 * 7 * Trademarks are the property of their respective owners. 8 */ 9 10 #ifndef _ELANTECH_H 11 #define _ELANTECH_H 12 13 /* 14 * Command values for Synaptics style queries 15 */ 16 #define ETP_FW_ID_QUERY 0x00 17 #define ETP_FW_VERSION_QUERY 0x01 18 #define ETP_CAPABILITIES_QUERY 0x02 19 #define ETP_SAMPLE_QUERY 0x03 20 #define ETP_RESOLUTION_QUERY 0x04 21 22 /* 23 * Command values for register reading or writing 24 */ 25 #define ETP_REGISTER_READ 0x10 26 #define ETP_REGISTER_WRITE 0x11 27 #define ETP_REGISTER_READWRITE 0x00 28 29 /* 30 * Hardware version 2 custom PS/2 command value 31 */ 32 #define ETP_PS2_CUSTOM_COMMAND 0xf8 33 34 /* 35 * Times to retry a ps2_command and millisecond delay between tries 36 */ 37 #define ETP_PS2_COMMAND_TRIES 3 38 #define ETP_PS2_COMMAND_DELAY 500 39 40 /* 41 * Times to try to read back a register and millisecond delay between tries 42 */ 43 #define ETP_READ_BACK_TRIES 5 44 #define ETP_READ_BACK_DELAY 2000 45 46 /* 47 * Register bitmasks for hardware version 1 48 */ 49 #define ETP_R10_ABSOLUTE_MODE 0x04 50 #define ETP_R11_4_BYTE_MODE 0x02 51 52 /* 53 * Capability bitmasks 54 */ 55 #define ETP_CAP_HAS_ROCKER 0x04 56 57 /* 58 * One hard to find application note states that X axis range is 0 to 576 59 * and Y axis range is 0 to 384 for harware version 1. 60 * Edge fuzz might be necessary because of bezel around the touchpad 61 */ 62 #define ETP_EDGE_FUZZ_V1 32 63 64 #define ETP_XMIN_V1 ( 0 + ETP_EDGE_FUZZ_V1) 65 #define ETP_XMAX_V1 (576 - ETP_EDGE_FUZZ_V1) 66 #define ETP_YMIN_V1 ( 0 + ETP_EDGE_FUZZ_V1) 67 #define ETP_YMAX_V1 (384 - ETP_EDGE_FUZZ_V1) 68 69 /* 70 * The resolution for older v2 hardware doubled. 71 * (newer v2's firmware provides command so we can query) 72 */ 73 #define ETP_XMIN_V2 0 74 #define ETP_XMAX_V2 1152 75 #define ETP_YMIN_V2 0 76 #define ETP_YMAX_V2 768 77 78 #define ETP_PMIN_V2 0 79 #define ETP_PMAX_V2 255 80 #define ETP_WMIN_V2 0 81 #define ETP_WMAX_V2 15 82 83 /* 84 * v3 hardware has 2 kinds of packet types, 85 * v4 hardware has 3. 86 */ 87 #define PACKET_UNKNOWN 0x01 88 #define PACKET_DEBOUNCE 0x02 89 #define PACKET_V3_HEAD 0x03 90 #define PACKET_V3_TAIL 0x04 91 #define PACKET_V4_HEAD 0x05 92 #define PACKET_V4_MOTION 0x06 93 #define PACKET_V4_STATUS 0x07 94 #define PACKET_TRACKPOINT 0x08 95 96 /* 97 * track up to 5 fingers for v4 hardware 98 */ 99 #define ETP_MAX_FINGERS 5 100 101 /* 102 * weight value for v4 hardware 103 */ 104 #define ETP_WEIGHT_VALUE 5 105 106 /* 107 * Bus information on 3rd byte of query ETP_RESOLUTION_QUERY(0x04) 108 */ 109 #define ETP_BUS_PS2_ONLY 0 110 #define ETP_BUS_SMB_ALERT_ONLY 1 111 #define ETP_BUS_SMB_HST_NTFY_ONLY 2 112 #define ETP_BUS_PS2_SMB_ALERT 3 113 #define ETP_BUS_PS2_SMB_HST_NTFY 4 114 115 /* 116 * New ICs are either using SMBus Host Notify or just plain PS2. 117 * 118 * ETP_FW_VERSION_QUERY is: 119 * Byte 1: 120 * - bit 0..3: IC BODY 121 * Byte 2: 122 * - bit 4: HiddenButton 123 * - bit 5: PS2_SMBUS_NOTIFY 124 * - bit 6: PS2CRCCheck 125 */ 126 #define ETP_NEW_IC_SMBUS_HOST_NOTIFY(fw_version) \ 127 ((((fw_version) & 0x0f2000) == 0x0f2000) && \ 128 ((fw_version) & 0x0000ff) > 0) 129 130 /* 131 * The base position for one finger, v4 hardware 132 */ 133 struct finger_pos { 134 unsigned int x; 135 unsigned int y; 136 }; 137 138 struct elantech_device_info { 139 unsigned char capabilities[3]; 140 unsigned char samples[3]; 141 unsigned char debug; 142 unsigned char hw_version; 143 unsigned int fw_version; 144 unsigned int x_min; 145 unsigned int y_min; 146 unsigned int x_max; 147 unsigned int y_max; 148 unsigned int x_res; 149 unsigned int y_res; 150 unsigned int x_traces; 151 unsigned int y_traces; 152 unsigned int width; 153 unsigned int bus; 154 bool paritycheck; 155 bool jumpy_cursor; 156 bool reports_pressure; 157 bool crc_enabled; 158 bool set_hw_resolution; 159 bool has_trackpoint; 160 bool has_middle_button; 161 int (*send_cmd)(struct psmouse *psmouse, unsigned char c, 162 unsigned char *param); 163 }; 164 165 struct elantech_data { 166 struct input_dev *tp_dev; /* Relative device for trackpoint */ 167 char tp_phys[32]; 168 unsigned char reg_07; 169 unsigned char reg_10; 170 unsigned char reg_11; 171 unsigned char reg_20; 172 unsigned char reg_21; 173 unsigned char reg_22; 174 unsigned char reg_23; 175 unsigned char reg_24; 176 unsigned char reg_25; 177 unsigned char reg_26; 178 unsigned int single_finger_reports; 179 unsigned int y_max; 180 unsigned int width; 181 struct finger_pos mt[ETP_MAX_FINGERS]; 182 unsigned char parity[256]; 183 struct elantech_device_info info; 184 void (*original_set_rate)(struct psmouse *psmouse, unsigned int rate); 185 }; 186 187 int elantech_detect(struct psmouse *psmouse, bool set_properties); 188 int elantech_init_ps2(struct psmouse *psmouse); 189 190 #ifdef CONFIG_MOUSE_PS2_ELANTECH 191 int elantech_init(struct psmouse *psmouse); 192 #else 193 static inline int elantech_init(struct psmouse *psmouse) 194 { 195 return -ENOSYS; 196 } 197 #endif /* CONFIG_MOUSE_PS2_ELANTECH */ 198 199 int elantech_init_smbus(struct psmouse *psmouse); 200 201 #endif 202