1 /* 2 * Cypress APA trackpad with I2C interface 3 * 4 * Author: Dudley Du <dudl@cypress.com> 5 * Further cleanup and restructuring by: 6 * Daniel Kurtz <djkurtz@chromium.org> 7 * Benson Leung <bleung@chromium.org> 8 * 9 * Copyright (C) 2011-2015 Cypress Semiconductor, Inc. 10 * Copyright (C) 2011-2012 Google, Inc. 11 * 12 * This file is subject to the terms and conditions of the GNU General Public 13 * License. See the file COPYING in the main directory of this archive for 14 * more details. 15 */ 16 17 #include <linux/delay.h> 18 #include <linux/i2c.h> 19 #include <linux/input.h> 20 #include <linux/input/mt.h> 21 #include <linux/module.h> 22 #include <linux/slab.h> 23 #include <asm/unaligned.h> 24 #include "cyapa.h" 25 26 27 #define GEN3_MAX_FINGERS 5 28 #define GEN3_FINGER_NUM(x) (((x) >> 4) & 0x07) 29 30 #define BLK_HEAD_BYTES 32 31 32 /* Macro for register map group offset. */ 33 #define PRODUCT_ID_SIZE 16 34 #define QUERY_DATA_SIZE 27 35 #define REG_PROTOCOL_GEN_QUERY_OFFSET 20 36 37 #define REG_OFFSET_DATA_BASE 0x0000 38 #define REG_OFFSET_COMMAND_BASE 0x0028 39 #define REG_OFFSET_QUERY_BASE 0x002a 40 41 #define CYAPA_OFFSET_SOFT_RESET REG_OFFSET_COMMAND_BASE 42 #define OP_RECALIBRATION_MASK 0x80 43 #define OP_REPORT_BASELINE_MASK 0x40 44 #define REG_OFFSET_MAX_BASELINE 0x0026 45 #define REG_OFFSET_MIN_BASELINE 0x0027 46 47 #define REG_OFFSET_POWER_MODE (REG_OFFSET_COMMAND_BASE + 1) 48 #define SET_POWER_MODE_DELAY 10000 /* Unit: us */ 49 #define SET_POWER_MODE_TRIES 5 50 51 #define GEN3_BL_CMD_CHECKSUM_SEED 0xff 52 #define GEN3_BL_CMD_INITIATE_BL 0x38 53 #define GEN3_BL_CMD_WRITE_BLOCK 0x39 54 #define GEN3_BL_CMD_VERIFY_BLOCK 0x3a 55 #define GEN3_BL_CMD_TERMINATE_BL 0x3b 56 #define GEN3_BL_CMD_LAUNCH_APP 0xa5 57 58 /* 59 * CYAPA trackpad device states. 60 * Used in register 0x00, bit1-0, DeviceStatus field. 61 * Other values indicate device is in an abnormal state and must be reset. 62 */ 63 #define CYAPA_DEV_NORMAL 0x03 64 #define CYAPA_DEV_BUSY 0x01 65 66 #define CYAPA_FW_BLOCK_SIZE 64 67 #define CYAPA_FW_READ_SIZE 16 68 #define CYAPA_FW_HDR_START 0x0780 69 #define CYAPA_FW_HDR_BLOCK_COUNT 2 70 #define CYAPA_FW_HDR_BLOCK_START (CYAPA_FW_HDR_START / CYAPA_FW_BLOCK_SIZE) 71 #define CYAPA_FW_HDR_SIZE (CYAPA_FW_HDR_BLOCK_COUNT * \ 72 CYAPA_FW_BLOCK_SIZE) 73 #define CYAPA_FW_DATA_START 0x0800 74 #define CYAPA_FW_DATA_BLOCK_COUNT 480 75 #define CYAPA_FW_DATA_BLOCK_START (CYAPA_FW_DATA_START / CYAPA_FW_BLOCK_SIZE) 76 #define CYAPA_FW_DATA_SIZE (CYAPA_FW_DATA_BLOCK_COUNT * \ 77 CYAPA_FW_BLOCK_SIZE) 78 #define CYAPA_FW_SIZE (CYAPA_FW_HDR_SIZE + CYAPA_FW_DATA_SIZE) 79 #define CYAPA_CMD_LEN 16 80 81 #define GEN3_BL_IDLE_FW_MAJ_VER_OFFSET 0x0b 82 #define GEN3_BL_IDLE_FW_MIN_VER_OFFSET (GEN3_BL_IDLE_FW_MAJ_VER_OFFSET + 1) 83 84 85 struct cyapa_touch { 86 /* 87 * high bits or x/y position value 88 * bit 7 - 4: high 4 bits of x position value 89 * bit 3 - 0: high 4 bits of y position value 90 */ 91 u8 xy_hi; 92 u8 x_lo; /* low 8 bits of x position value. */ 93 u8 y_lo; /* low 8 bits of y position value. */ 94 u8 pressure; 95 /* id range is 1 - 15. It is incremented with every new touch. */ 96 u8 id; 97 } __packed; 98 99 struct cyapa_reg_data { 100 /* 101 * bit 0 - 1: device status 102 * bit 3 - 2: power mode 103 * bit 6 - 4: reserved 104 * bit 7: interrupt valid bit 105 */ 106 u8 device_status; 107 /* 108 * bit 7 - 4: number of fingers currently touching pad 109 * bit 3: valid data check bit 110 * bit 2: middle mechanism button state if exists 111 * bit 1: right mechanism button state if exists 112 * bit 0: left mechanism button state if exists 113 */ 114 u8 finger_btn; 115 /* CYAPA reports up to 5 touches per packet. */ 116 struct cyapa_touch touches[5]; 117 } __packed; 118 119 struct gen3_write_block_cmd { 120 u8 checksum_seed; /* Always be 0xff */ 121 u8 cmd_code; /* command code: 0x39 */ 122 u8 key[8]; /* 8-byte security key */ 123 __be16 block_num; 124 u8 block_data[CYAPA_FW_BLOCK_SIZE]; 125 u8 block_checksum; /* Calculated using bytes 12 - 75 */ 126 u8 cmd_checksum; /* Calculated using bytes 0-76 */ 127 } __packed; 128 129 static const u8 security_key[] = { 130 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07 }; 131 static const u8 bl_activate[] = { 0x00, 0xff, 0x38, 0x00, 0x01, 0x02, 0x03, 132 0x04, 0x05, 0x06, 0x07 }; 133 static const u8 bl_deactivate[] = { 0x00, 0xff, 0x3b, 0x00, 0x01, 0x02, 0x03, 134 0x04, 0x05, 0x06, 0x07 }; 135 static const u8 bl_exit[] = { 0x00, 0xff, 0xa5, 0x00, 0x01, 0x02, 0x03, 0x04, 136 0x05, 0x06, 0x07 }; 137 138 139 /* for byte read/write command */ 140 #define CMD_RESET 0 141 #define CMD_POWER_MODE 1 142 #define CMD_DEV_STATUS 2 143 #define CMD_REPORT_MAX_BASELINE 3 144 #define CMD_REPORT_MIN_BASELINE 4 145 #define SMBUS_BYTE_CMD(cmd) (((cmd) & 0x3f) << 1) 146 #define CYAPA_SMBUS_RESET SMBUS_BYTE_CMD(CMD_RESET) 147 #define CYAPA_SMBUS_POWER_MODE SMBUS_BYTE_CMD(CMD_POWER_MODE) 148 #define CYAPA_SMBUS_DEV_STATUS SMBUS_BYTE_CMD(CMD_DEV_STATUS) 149 #define CYAPA_SMBUS_MAX_BASELINE SMBUS_BYTE_CMD(CMD_REPORT_MAX_BASELINE) 150 #define CYAPA_SMBUS_MIN_BASELINE SMBUS_BYTE_CMD(CMD_REPORT_MIN_BASELINE) 151 152 /* for group registers read/write command */ 153 #define REG_GROUP_DATA 0 154 #define REG_GROUP_CMD 2 155 #define REG_GROUP_QUERY 3 156 #define SMBUS_GROUP_CMD(grp) (0x80 | (((grp) & 0x07) << 3)) 157 #define CYAPA_SMBUS_GROUP_DATA SMBUS_GROUP_CMD(REG_GROUP_DATA) 158 #define CYAPA_SMBUS_GROUP_CMD SMBUS_GROUP_CMD(REG_GROUP_CMD) 159 #define CYAPA_SMBUS_GROUP_QUERY SMBUS_GROUP_CMD(REG_GROUP_QUERY) 160 161 /* for register block read/write command */ 162 #define CMD_BL_STATUS 0 163 #define CMD_BL_HEAD 1 164 #define CMD_BL_CMD 2 165 #define CMD_BL_DATA 3 166 #define CMD_BL_ALL 4 167 #define CMD_BLK_PRODUCT_ID 5 168 #define CMD_BLK_HEAD 6 169 #define SMBUS_BLOCK_CMD(cmd) (0xc0 | (((cmd) & 0x1f) << 1)) 170 171 /* register block read/write command in bootloader mode */ 172 #define CYAPA_SMBUS_BL_STATUS SMBUS_BLOCK_CMD(CMD_BL_STATUS) 173 #define CYAPA_SMBUS_BL_HEAD SMBUS_BLOCK_CMD(CMD_BL_HEAD) 174 #define CYAPA_SMBUS_BL_CMD SMBUS_BLOCK_CMD(CMD_BL_CMD) 175 #define CYAPA_SMBUS_BL_DATA SMBUS_BLOCK_CMD(CMD_BL_DATA) 176 #define CYAPA_SMBUS_BL_ALL SMBUS_BLOCK_CMD(CMD_BL_ALL) 177 178 /* register block read/write command in operational mode */ 179 #define CYAPA_SMBUS_BLK_PRODUCT_ID SMBUS_BLOCK_CMD(CMD_BLK_PRODUCT_ID) 180 #define CYAPA_SMBUS_BLK_HEAD SMBUS_BLOCK_CMD(CMD_BLK_HEAD) 181 182 /* for byte read/write command */ 183 #define CMD_RESET 0 184 #define CMD_POWER_MODE 1 185 #define CMD_DEV_STATUS 2 186 #define CMD_REPORT_MAX_BASELINE 3 187 #define CMD_REPORT_MIN_BASELINE 4 188 #define SMBUS_BYTE_CMD(cmd) (((cmd) & 0x3f) << 1) 189 #define CYAPA_SMBUS_RESET SMBUS_BYTE_CMD(CMD_RESET) 190 #define CYAPA_SMBUS_POWER_MODE SMBUS_BYTE_CMD(CMD_POWER_MODE) 191 #define CYAPA_SMBUS_DEV_STATUS SMBUS_BYTE_CMD(CMD_DEV_STATUS) 192 #define CYAPA_SMBUS_MAX_BASELINE SMBUS_BYTE_CMD(CMD_REPORT_MAX_BASELINE) 193 #define CYAPA_SMBUS_MIN_BASELINE SMBUS_BYTE_CMD(CMD_REPORT_MIN_BASELINE) 194 195 /* for group registers read/write command */ 196 #define REG_GROUP_DATA 0 197 #define REG_GROUP_CMD 2 198 #define REG_GROUP_QUERY 3 199 #define SMBUS_GROUP_CMD(grp) (0x80 | (((grp) & 0x07) << 3)) 200 #define CYAPA_SMBUS_GROUP_DATA SMBUS_GROUP_CMD(REG_GROUP_DATA) 201 #define CYAPA_SMBUS_GROUP_CMD SMBUS_GROUP_CMD(REG_GROUP_CMD) 202 #define CYAPA_SMBUS_GROUP_QUERY SMBUS_GROUP_CMD(REG_GROUP_QUERY) 203 204 /* for register block read/write command */ 205 #define CMD_BL_STATUS 0 206 #define CMD_BL_HEAD 1 207 #define CMD_BL_CMD 2 208 #define CMD_BL_DATA 3 209 #define CMD_BL_ALL 4 210 #define CMD_BLK_PRODUCT_ID 5 211 #define CMD_BLK_HEAD 6 212 #define SMBUS_BLOCK_CMD(cmd) (0xc0 | (((cmd) & 0x1f) << 1)) 213 214 /* register block read/write command in bootloader mode */ 215 #define CYAPA_SMBUS_BL_STATUS SMBUS_BLOCK_CMD(CMD_BL_STATUS) 216 #define CYAPA_SMBUS_BL_HEAD SMBUS_BLOCK_CMD(CMD_BL_HEAD) 217 #define CYAPA_SMBUS_BL_CMD SMBUS_BLOCK_CMD(CMD_BL_CMD) 218 #define CYAPA_SMBUS_BL_DATA SMBUS_BLOCK_CMD(CMD_BL_DATA) 219 #define CYAPA_SMBUS_BL_ALL SMBUS_BLOCK_CMD(CMD_BL_ALL) 220 221 /* register block read/write command in operational mode */ 222 #define CYAPA_SMBUS_BLK_PRODUCT_ID SMBUS_BLOCK_CMD(CMD_BLK_PRODUCT_ID) 223 #define CYAPA_SMBUS_BLK_HEAD SMBUS_BLOCK_CMD(CMD_BLK_HEAD) 224 225 struct cyapa_cmd_len { 226 u8 cmd; 227 u8 len; 228 }; 229 230 /* maps generic CYAPA_CMD_* code to the I2C equivalent */ 231 static const struct cyapa_cmd_len cyapa_i2c_cmds[] = { 232 { CYAPA_OFFSET_SOFT_RESET, 1 }, /* CYAPA_CMD_SOFT_RESET */ 233 { REG_OFFSET_COMMAND_BASE + 1, 1 }, /* CYAPA_CMD_POWER_MODE */ 234 { REG_OFFSET_DATA_BASE, 1 }, /* CYAPA_CMD_DEV_STATUS */ 235 { REG_OFFSET_DATA_BASE, sizeof(struct cyapa_reg_data) }, 236 /* CYAPA_CMD_GROUP_DATA */ 237 { REG_OFFSET_COMMAND_BASE, 0 }, /* CYAPA_CMD_GROUP_CMD */ 238 { REG_OFFSET_QUERY_BASE, QUERY_DATA_SIZE }, /* CYAPA_CMD_GROUP_QUERY */ 239 { BL_HEAD_OFFSET, 3 }, /* CYAPA_CMD_BL_STATUS */ 240 { BL_HEAD_OFFSET, 16 }, /* CYAPA_CMD_BL_HEAD */ 241 { BL_HEAD_OFFSET, 16 }, /* CYAPA_CMD_BL_CMD */ 242 { BL_DATA_OFFSET, 16 }, /* CYAPA_CMD_BL_DATA */ 243 { BL_HEAD_OFFSET, 32 }, /* CYAPA_CMD_BL_ALL */ 244 { REG_OFFSET_QUERY_BASE, PRODUCT_ID_SIZE }, 245 /* CYAPA_CMD_BLK_PRODUCT_ID */ 246 { REG_OFFSET_DATA_BASE, 32 }, /* CYAPA_CMD_BLK_HEAD */ 247 { REG_OFFSET_MAX_BASELINE, 1 }, /* CYAPA_CMD_MAX_BASELINE */ 248 { REG_OFFSET_MIN_BASELINE, 1 }, /* CYAPA_CMD_MIN_BASELINE */ 249 }; 250 251 static const struct cyapa_cmd_len cyapa_smbus_cmds[] = { 252 { CYAPA_SMBUS_RESET, 1 }, /* CYAPA_CMD_SOFT_RESET */ 253 { CYAPA_SMBUS_POWER_MODE, 1 }, /* CYAPA_CMD_POWER_MODE */ 254 { CYAPA_SMBUS_DEV_STATUS, 1 }, /* CYAPA_CMD_DEV_STATUS */ 255 { CYAPA_SMBUS_GROUP_DATA, sizeof(struct cyapa_reg_data) }, 256 /* CYAPA_CMD_GROUP_DATA */ 257 { CYAPA_SMBUS_GROUP_CMD, 2 }, /* CYAPA_CMD_GROUP_CMD */ 258 { CYAPA_SMBUS_GROUP_QUERY, QUERY_DATA_SIZE }, 259 /* CYAPA_CMD_GROUP_QUERY */ 260 { CYAPA_SMBUS_BL_STATUS, 3 }, /* CYAPA_CMD_BL_STATUS */ 261 { CYAPA_SMBUS_BL_HEAD, 16 }, /* CYAPA_CMD_BL_HEAD */ 262 { CYAPA_SMBUS_BL_CMD, 16 }, /* CYAPA_CMD_BL_CMD */ 263 { CYAPA_SMBUS_BL_DATA, 16 }, /* CYAPA_CMD_BL_DATA */ 264 { CYAPA_SMBUS_BL_ALL, 32 }, /* CYAPA_CMD_BL_ALL */ 265 { CYAPA_SMBUS_BLK_PRODUCT_ID, PRODUCT_ID_SIZE }, 266 /* CYAPA_CMD_BLK_PRODUCT_ID */ 267 { CYAPA_SMBUS_BLK_HEAD, 16 }, /* CYAPA_CMD_BLK_HEAD */ 268 { CYAPA_SMBUS_MAX_BASELINE, 1 }, /* CYAPA_CMD_MAX_BASELINE */ 269 { CYAPA_SMBUS_MIN_BASELINE, 1 }, /* CYAPA_CMD_MIN_BASELINE */ 270 }; 271 272 static int cyapa_gen3_try_poll_handler(struct cyapa *cyapa); 273 274 /* 275 * cyapa_smbus_read_block - perform smbus block read command 276 * @cyapa - private data structure of the driver 277 * @cmd - the properly encoded smbus command 278 * @len - expected length of smbus command result 279 * @values - buffer to store smbus command result 280 * 281 * Returns negative errno, else the number of bytes written. 282 * 283 * Note: 284 * In trackpad device, the memory block allocated for I2C register map 285 * is 256 bytes, so the max read block for I2C bus is 256 bytes. 286 */ 287 ssize_t cyapa_smbus_read_block(struct cyapa *cyapa, u8 cmd, size_t len, 288 u8 *values) 289 { 290 ssize_t ret; 291 u8 index; 292 u8 smbus_cmd; 293 u8 *buf; 294 struct i2c_client *client = cyapa->client; 295 296 if (!(SMBUS_BYTE_BLOCK_CMD_MASK & cmd)) 297 return -EINVAL; 298 299 if (SMBUS_GROUP_BLOCK_CMD_MASK & cmd) { 300 /* read specific block registers command. */ 301 smbus_cmd = SMBUS_ENCODE_RW(cmd, SMBUS_READ); 302 ret = i2c_smbus_read_block_data(client, smbus_cmd, values); 303 goto out; 304 } 305 306 ret = 0; 307 for (index = 0; index * I2C_SMBUS_BLOCK_MAX < len; index++) { 308 smbus_cmd = SMBUS_ENCODE_IDX(cmd, index); 309 smbus_cmd = SMBUS_ENCODE_RW(smbus_cmd, SMBUS_READ); 310 buf = values + I2C_SMBUS_BLOCK_MAX * index; 311 ret = i2c_smbus_read_block_data(client, smbus_cmd, buf); 312 if (ret < 0) 313 goto out; 314 } 315 316 out: 317 return ret > 0 ? len : ret; 318 } 319 320 static s32 cyapa_read_byte(struct cyapa *cyapa, u8 cmd_idx) 321 { 322 u8 cmd; 323 324 if (cyapa->smbus) { 325 cmd = cyapa_smbus_cmds[cmd_idx].cmd; 326 cmd = SMBUS_ENCODE_RW(cmd, SMBUS_READ); 327 } else { 328 cmd = cyapa_i2c_cmds[cmd_idx].cmd; 329 } 330 return i2c_smbus_read_byte_data(cyapa->client, cmd); 331 } 332 333 static s32 cyapa_write_byte(struct cyapa *cyapa, u8 cmd_idx, u8 value) 334 { 335 u8 cmd; 336 337 if (cyapa->smbus) { 338 cmd = cyapa_smbus_cmds[cmd_idx].cmd; 339 cmd = SMBUS_ENCODE_RW(cmd, SMBUS_WRITE); 340 } else { 341 cmd = cyapa_i2c_cmds[cmd_idx].cmd; 342 } 343 return i2c_smbus_write_byte_data(cyapa->client, cmd, value); 344 } 345 346 ssize_t cyapa_i2c_reg_read_block(struct cyapa *cyapa, u8 reg, size_t len, 347 u8 *values) 348 { 349 return i2c_smbus_read_i2c_block_data(cyapa->client, reg, len, values); 350 } 351 352 static ssize_t cyapa_i2c_reg_write_block(struct cyapa *cyapa, u8 reg, 353 size_t len, const u8 *values) 354 { 355 return i2c_smbus_write_i2c_block_data(cyapa->client, reg, len, values); 356 } 357 358 ssize_t cyapa_read_block(struct cyapa *cyapa, u8 cmd_idx, u8 *values) 359 { 360 u8 cmd; 361 size_t len; 362 363 if (cyapa->smbus) { 364 cmd = cyapa_smbus_cmds[cmd_idx].cmd; 365 len = cyapa_smbus_cmds[cmd_idx].len; 366 return cyapa_smbus_read_block(cyapa, cmd, len, values); 367 } 368 cmd = cyapa_i2c_cmds[cmd_idx].cmd; 369 len = cyapa_i2c_cmds[cmd_idx].len; 370 return cyapa_i2c_reg_read_block(cyapa, cmd, len, values); 371 } 372 373 /* 374 * Determine the Gen3 trackpad device's current operating state. 375 * 376 */ 377 static int cyapa_gen3_state_parse(struct cyapa *cyapa, u8 *reg_data, int len) 378 { 379 cyapa->state = CYAPA_STATE_NO_DEVICE; 380 381 /* Parse based on Gen3 characteristic registers and bits */ 382 if (reg_data[REG_BL_FILE] == BL_FILE && 383 reg_data[REG_BL_ERROR] == BL_ERROR_NO_ERR_IDLE && 384 (reg_data[REG_BL_STATUS] == 385 (BL_STATUS_RUNNING | BL_STATUS_CSUM_VALID) || 386 reg_data[REG_BL_STATUS] == BL_STATUS_RUNNING)) { 387 /* 388 * Normal state after power on or reset, 389 * REG_BL_STATUS == 0x11, firmware image checksum is valid. 390 * REG_BL_STATUS == 0x10, firmware image checksum is invalid. 391 */ 392 cyapa->gen = CYAPA_GEN3; 393 cyapa->state = CYAPA_STATE_BL_IDLE; 394 } else if (reg_data[REG_BL_FILE] == BL_FILE && 395 (reg_data[REG_BL_STATUS] & BL_STATUS_RUNNING) == 396 BL_STATUS_RUNNING) { 397 cyapa->gen = CYAPA_GEN3; 398 if (reg_data[REG_BL_STATUS] & BL_STATUS_BUSY) { 399 cyapa->state = CYAPA_STATE_BL_BUSY; 400 } else { 401 if ((reg_data[REG_BL_ERROR] & BL_ERROR_BOOTLOADING) == 402 BL_ERROR_BOOTLOADING) 403 cyapa->state = CYAPA_STATE_BL_ACTIVE; 404 else 405 cyapa->state = CYAPA_STATE_BL_IDLE; 406 } 407 } else if ((reg_data[REG_OP_STATUS] & OP_STATUS_SRC) && 408 (reg_data[REG_OP_DATA1] & OP_DATA_VALID)) { 409 /* 410 * Normal state when running in operational mode, 411 * may also not in full power state or 412 * busying in command process. 413 */ 414 if (GEN3_FINGER_NUM(reg_data[REG_OP_DATA1]) <= 415 GEN3_MAX_FINGERS) { 416 /* Finger number data is valid. */ 417 cyapa->gen = CYAPA_GEN3; 418 cyapa->state = CYAPA_STATE_OP; 419 } 420 } else if (reg_data[REG_OP_STATUS] == 0x0C && 421 reg_data[REG_OP_DATA1] == 0x08) { 422 /* Op state when first two registers overwritten with 0x00 */ 423 cyapa->gen = CYAPA_GEN3; 424 cyapa->state = CYAPA_STATE_OP; 425 } else if (reg_data[REG_BL_STATUS] & 426 (BL_STATUS_RUNNING | BL_STATUS_BUSY)) { 427 cyapa->gen = CYAPA_GEN3; 428 cyapa->state = CYAPA_STATE_BL_BUSY; 429 } 430 431 if (cyapa->gen == CYAPA_GEN3 && (cyapa->state == CYAPA_STATE_OP || 432 cyapa->state == CYAPA_STATE_BL_IDLE || 433 cyapa->state == CYAPA_STATE_BL_ACTIVE || 434 cyapa->state == CYAPA_STATE_BL_BUSY)) 435 return 0; 436 437 return -EAGAIN; 438 } 439 440 /* 441 * Enter bootloader by soft resetting the device. 442 * 443 * If device is already in the bootloader, the function just returns. 444 * Otherwise, reset the device; after reset, device enters bootloader idle 445 * state immediately. 446 * 447 * Returns: 448 * 0 on success 449 * -EAGAIN device was reset, but is not now in bootloader idle state 450 * < 0 if the device never responds within the timeout 451 */ 452 static int cyapa_gen3_bl_enter(struct cyapa *cyapa) 453 { 454 int error; 455 int waiting_time; 456 457 error = cyapa_poll_state(cyapa, 500); 458 if (error) 459 return error; 460 if (cyapa->state == CYAPA_STATE_BL_IDLE) { 461 /* Already in BL_IDLE. Skipping reset. */ 462 return 0; 463 } 464 465 if (cyapa->state != CYAPA_STATE_OP) 466 return -EAGAIN; 467 468 cyapa->operational = false; 469 cyapa->state = CYAPA_STATE_NO_DEVICE; 470 error = cyapa_write_byte(cyapa, CYAPA_CMD_SOFT_RESET, 0x01); 471 if (error) 472 return -EIO; 473 474 usleep_range(25000, 50000); 475 waiting_time = 2000; /* For some shipset, max waiting time is 1~2s. */ 476 do { 477 error = cyapa_poll_state(cyapa, 500); 478 if (error) { 479 if (error == -ETIMEDOUT) { 480 waiting_time -= 500; 481 continue; 482 } 483 return error; 484 } 485 486 if ((cyapa->state == CYAPA_STATE_BL_IDLE) && 487 !(cyapa->status[REG_BL_STATUS] & BL_STATUS_WATCHDOG)) 488 break; 489 490 msleep(100); 491 waiting_time -= 100; 492 } while (waiting_time > 0); 493 494 if ((cyapa->state != CYAPA_STATE_BL_IDLE) || 495 (cyapa->status[REG_BL_STATUS] & BL_STATUS_WATCHDOG)) 496 return -EAGAIN; 497 498 return 0; 499 } 500 501 static int cyapa_gen3_bl_activate(struct cyapa *cyapa) 502 { 503 int error; 504 505 error = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_activate), 506 bl_activate); 507 if (error) 508 return error; 509 510 /* Wait for bootloader to activate; takes between 2 and 12 seconds */ 511 msleep(2000); 512 error = cyapa_poll_state(cyapa, 11000); 513 if (error) 514 return error; 515 if (cyapa->state != CYAPA_STATE_BL_ACTIVE) 516 return -EAGAIN; 517 518 return 0; 519 } 520 521 static int cyapa_gen3_bl_deactivate(struct cyapa *cyapa) 522 { 523 int error; 524 525 error = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_deactivate), 526 bl_deactivate); 527 if (error) 528 return error; 529 530 /* Wait for bootloader to switch to idle state; should take < 100ms */ 531 msleep(100); 532 error = cyapa_poll_state(cyapa, 500); 533 if (error) 534 return error; 535 if (cyapa->state != CYAPA_STATE_BL_IDLE) 536 return -EAGAIN; 537 return 0; 538 } 539 540 /* 541 * Exit bootloader 542 * 543 * Send bl_exit command, then wait 50 - 100 ms to let device transition to 544 * operational mode. If this is the first time the device's firmware is 545 * running, it can take up to 2 seconds to calibrate its sensors. So, poll 546 * the device's new state for up to 2 seconds. 547 * 548 * Returns: 549 * -EIO failure while reading from device 550 * -EAGAIN device is stuck in bootloader, b/c it has invalid firmware 551 * 0 device is supported and in operational mode 552 */ 553 static int cyapa_gen3_bl_exit(struct cyapa *cyapa) 554 { 555 int error; 556 557 error = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_exit), bl_exit); 558 if (error) 559 return error; 560 561 /* 562 * Wait for bootloader to exit, and operation mode to start. 563 * Normally, this takes at least 50 ms. 564 */ 565 usleep_range(50000, 100000); 566 /* 567 * In addition, when a device boots for the first time after being 568 * updated to new firmware, it must first calibrate its sensors, which 569 * can take up to an additional 2 seconds. If the device power is 570 * running low, this may take even longer. 571 */ 572 error = cyapa_poll_state(cyapa, 4000); 573 if (error < 0) 574 return error; 575 if (cyapa->state != CYAPA_STATE_OP) 576 return -EAGAIN; 577 578 return 0; 579 } 580 581 static u16 cyapa_gen3_csum(const u8 *buf, size_t count) 582 { 583 int i; 584 u16 csum = 0; 585 586 for (i = 0; i < count; i++) 587 csum += buf[i]; 588 589 return csum; 590 } 591 592 /* 593 * Verify the integrity of a CYAPA firmware image file. 594 * 595 * The firmware image file is 30848 bytes, composed of 482 64-byte blocks. 596 * 597 * The first 2 blocks are the firmware header. 598 * The next 480 blocks are the firmware image. 599 * 600 * The first two bytes of the header hold the header checksum, computed by 601 * summing the other 126 bytes of the header. 602 * The last two bytes of the header hold the firmware image checksum, computed 603 * by summing the 30720 bytes of the image modulo 0xffff. 604 * 605 * Both checksums are stored little-endian. 606 */ 607 static int cyapa_gen3_check_fw(struct cyapa *cyapa, const struct firmware *fw) 608 { 609 struct device *dev = &cyapa->client->dev; 610 u16 csum; 611 u16 csum_expected; 612 613 /* Firmware must match exact 30848 bytes = 482 64-byte blocks. */ 614 if (fw->size != CYAPA_FW_SIZE) { 615 dev_err(dev, "invalid firmware size = %zu, expected %u.\n", 616 fw->size, CYAPA_FW_SIZE); 617 return -EINVAL; 618 } 619 620 /* Verify header block */ 621 csum_expected = (fw->data[0] << 8) | fw->data[1]; 622 csum = cyapa_gen3_csum(&fw->data[2], CYAPA_FW_HDR_SIZE - 2); 623 if (csum != csum_expected) { 624 dev_err(dev, "%s %04x, expected: %04x\n", 625 "invalid firmware header checksum = ", 626 csum, csum_expected); 627 return -EINVAL; 628 } 629 630 /* Verify firmware image */ 631 csum_expected = (fw->data[CYAPA_FW_HDR_SIZE - 2] << 8) | 632 fw->data[CYAPA_FW_HDR_SIZE - 1]; 633 csum = cyapa_gen3_csum(&fw->data[CYAPA_FW_HDR_SIZE], 634 CYAPA_FW_DATA_SIZE); 635 if (csum != csum_expected) { 636 dev_err(dev, "%s %04x, expected: %04x\n", 637 "invalid firmware header checksum = ", 638 csum, csum_expected); 639 return -EINVAL; 640 } 641 return 0; 642 } 643 644 /* 645 * Write a |len| byte long buffer |buf| to the device, by chopping it up into a 646 * sequence of smaller |CYAPA_CMD_LEN|-length write commands. 647 * 648 * The data bytes for a write command are prepended with the 1-byte offset 649 * of the data relative to the start of |buf|. 650 */ 651 static int cyapa_gen3_write_buffer(struct cyapa *cyapa, 652 const u8 *buf, size_t len) 653 { 654 int error; 655 size_t i; 656 unsigned char cmd[CYAPA_CMD_LEN + 1]; 657 size_t cmd_len; 658 659 for (i = 0; i < len; i += CYAPA_CMD_LEN) { 660 const u8 *payload = &buf[i]; 661 662 cmd_len = (len - i >= CYAPA_CMD_LEN) ? CYAPA_CMD_LEN : len - i; 663 cmd[0] = i; 664 memcpy(&cmd[1], payload, cmd_len); 665 666 error = cyapa_i2c_reg_write_block(cyapa, 0, cmd_len + 1, cmd); 667 if (error) 668 return error; 669 } 670 return 0; 671 } 672 673 /* 674 * A firmware block write command writes 64 bytes of data to a single flash 675 * page in the device. The 78-byte block write command has the format: 676 * <0xff> <CMD> <Key> <Start> <Data> <Data-Checksum> <CMD Checksum> 677 * 678 * <0xff> - every command starts with 0xff 679 * <CMD> - the write command value is 0x39 680 * <Key> - write commands include an 8-byte key: { 00 01 02 03 04 05 06 07 } 681 * <Block> - Memory Block number (address / 64) (16-bit, big-endian) 682 * <Data> - 64 bytes of firmware image data 683 * <Data Checksum> - sum of 64 <Data> bytes, modulo 0xff 684 * <CMD Checksum> - sum of 77 bytes, from 0xff to <Data Checksum> 685 * 686 * Each write command is split into 5 i2c write transactions of up to 16 bytes. 687 * Each transaction starts with an i2c register offset: (00, 10, 20, 30, 40). 688 */ 689 static int cyapa_gen3_write_fw_block(struct cyapa *cyapa, 690 u16 block, const u8 *data) 691 { 692 int ret; 693 struct gen3_write_block_cmd write_block_cmd; 694 u8 status[BL_STATUS_SIZE]; 695 int tries; 696 u8 bl_status, bl_error; 697 698 /* Set write command and security key bytes. */ 699 write_block_cmd.checksum_seed = GEN3_BL_CMD_CHECKSUM_SEED; 700 write_block_cmd.cmd_code = GEN3_BL_CMD_WRITE_BLOCK; 701 memcpy(write_block_cmd.key, security_key, sizeof(security_key)); 702 put_unaligned_be16(block, &write_block_cmd.block_num); 703 memcpy(write_block_cmd.block_data, data, CYAPA_FW_BLOCK_SIZE); 704 write_block_cmd.block_checksum = cyapa_gen3_csum( 705 write_block_cmd.block_data, CYAPA_FW_BLOCK_SIZE); 706 write_block_cmd.cmd_checksum = cyapa_gen3_csum((u8 *)&write_block_cmd, 707 sizeof(write_block_cmd) - 1); 708 709 ret = cyapa_gen3_write_buffer(cyapa, (u8 *)&write_block_cmd, 710 sizeof(write_block_cmd)); 711 if (ret) 712 return ret; 713 714 /* Wait for write to finish */ 715 tries = 11; /* Programming for one block can take about 100ms. */ 716 do { 717 usleep_range(10000, 20000); 718 719 /* Check block write command result status. */ 720 ret = cyapa_i2c_reg_read_block(cyapa, BL_HEAD_OFFSET, 721 BL_STATUS_SIZE, status); 722 if (ret != BL_STATUS_SIZE) 723 return (ret < 0) ? ret : -EIO; 724 } while ((status[REG_BL_STATUS] & BL_STATUS_BUSY) && --tries); 725 726 /* Ignore WATCHDOG bit and reserved bits. */ 727 bl_status = status[REG_BL_STATUS] & ~BL_STATUS_REV_MASK; 728 bl_error = status[REG_BL_ERROR] & ~BL_ERROR_RESERVED; 729 730 if (bl_status & BL_STATUS_BUSY) 731 ret = -ETIMEDOUT; 732 else if (bl_status != BL_STATUS_RUNNING || 733 bl_error != BL_ERROR_BOOTLOADING) 734 ret = -EIO; 735 else 736 ret = 0; 737 738 return ret; 739 } 740 741 static int cyapa_gen3_write_blocks(struct cyapa *cyapa, 742 size_t start_block, size_t block_count, 743 const u8 *image_data) 744 { 745 int error; 746 int i; 747 748 for (i = 0; i < block_count; i++) { 749 size_t block = start_block + i; 750 size_t addr = i * CYAPA_FW_BLOCK_SIZE; 751 const u8 *data = &image_data[addr]; 752 753 error = cyapa_gen3_write_fw_block(cyapa, block, data); 754 if (error) 755 return error; 756 } 757 return 0; 758 } 759 760 static int cyapa_gen3_do_fw_update(struct cyapa *cyapa, 761 const struct firmware *fw) 762 { 763 struct device *dev = &cyapa->client->dev; 764 int error; 765 766 /* First write data, starting at byte 128 of fw->data */ 767 error = cyapa_gen3_write_blocks(cyapa, 768 CYAPA_FW_DATA_BLOCK_START, CYAPA_FW_DATA_BLOCK_COUNT, 769 &fw->data[CYAPA_FW_HDR_BLOCK_COUNT * CYAPA_FW_BLOCK_SIZE]); 770 if (error) { 771 dev_err(dev, "FW update aborted, write image: %d\n", error); 772 return error; 773 } 774 775 /* Then write checksum */ 776 error = cyapa_gen3_write_blocks(cyapa, 777 CYAPA_FW_HDR_BLOCK_START, CYAPA_FW_HDR_BLOCK_COUNT, 778 &fw->data[0]); 779 if (error) { 780 dev_err(dev, "FW update aborted, write checksum: %d\n", error); 781 return error; 782 } 783 784 return 0; 785 } 786 787 static ssize_t cyapa_gen3_do_calibrate(struct device *dev, 788 struct device_attribute *attr, 789 const char *buf, size_t count) 790 { 791 struct cyapa *cyapa = dev_get_drvdata(dev); 792 int tries; 793 int ret; 794 795 ret = cyapa_read_byte(cyapa, CYAPA_CMD_DEV_STATUS); 796 if (ret < 0) { 797 dev_err(dev, "Error reading dev status: %d\n", ret); 798 goto out; 799 } 800 if ((ret & CYAPA_DEV_NORMAL) != CYAPA_DEV_NORMAL) { 801 dev_warn(dev, "Trackpad device is busy, device state: 0x%02x\n", 802 ret); 803 ret = -EAGAIN; 804 goto out; 805 } 806 807 ret = cyapa_write_byte(cyapa, CYAPA_CMD_SOFT_RESET, 808 OP_RECALIBRATION_MASK); 809 if (ret < 0) { 810 dev_err(dev, "Failed to send calibrate command: %d\n", 811 ret); 812 goto out; 813 } 814 815 tries = 20; /* max recalibration timeout 2s. */ 816 do { 817 /* 818 * For this recalibration, the max time will not exceed 2s. 819 * The average time is approximately 500 - 700 ms, and we 820 * will check the status every 100 - 200ms. 821 */ 822 usleep_range(100000, 200000); 823 824 ret = cyapa_read_byte(cyapa, CYAPA_CMD_DEV_STATUS); 825 if (ret < 0) { 826 dev_err(dev, "Error reading dev status: %d\n", 827 ret); 828 goto out; 829 } 830 if ((ret & CYAPA_DEV_NORMAL) == CYAPA_DEV_NORMAL) 831 break; 832 } while (--tries); 833 834 if (tries == 0) { 835 dev_err(dev, "Failed to calibrate. Timeout.\n"); 836 ret = -ETIMEDOUT; 837 goto out; 838 } 839 dev_dbg(dev, "Calibration successful.\n"); 840 841 out: 842 return ret < 0 ? ret : count; 843 } 844 845 static ssize_t cyapa_gen3_show_baseline(struct device *dev, 846 struct device_attribute *attr, char *buf) 847 { 848 struct cyapa *cyapa = dev_get_drvdata(dev); 849 int max_baseline, min_baseline; 850 int tries; 851 int ret; 852 853 ret = cyapa_read_byte(cyapa, CYAPA_CMD_DEV_STATUS); 854 if (ret < 0) { 855 dev_err(dev, "Error reading dev status. err = %d\n", ret); 856 goto out; 857 } 858 if ((ret & CYAPA_DEV_NORMAL) != CYAPA_DEV_NORMAL) { 859 dev_warn(dev, "Trackpad device is busy. device state = 0x%x\n", 860 ret); 861 ret = -EAGAIN; 862 goto out; 863 } 864 865 ret = cyapa_write_byte(cyapa, CYAPA_CMD_SOFT_RESET, 866 OP_REPORT_BASELINE_MASK); 867 if (ret < 0) { 868 dev_err(dev, "Failed to send report baseline command. %d\n", 869 ret); 870 goto out; 871 } 872 873 tries = 3; /* Try for 30 to 60 ms */ 874 do { 875 usleep_range(10000, 20000); 876 877 ret = cyapa_read_byte(cyapa, CYAPA_CMD_DEV_STATUS); 878 if (ret < 0) { 879 dev_err(dev, "Error reading dev status. err = %d\n", 880 ret); 881 goto out; 882 } 883 if ((ret & CYAPA_DEV_NORMAL) == CYAPA_DEV_NORMAL) 884 break; 885 } while (--tries); 886 887 if (tries == 0) { 888 dev_err(dev, "Device timed out going to Normal state.\n"); 889 ret = -ETIMEDOUT; 890 goto out; 891 } 892 893 ret = cyapa_read_byte(cyapa, CYAPA_CMD_MAX_BASELINE); 894 if (ret < 0) { 895 dev_err(dev, "Failed to read max baseline. err = %d\n", ret); 896 goto out; 897 } 898 max_baseline = ret; 899 900 ret = cyapa_read_byte(cyapa, CYAPA_CMD_MIN_BASELINE); 901 if (ret < 0) { 902 dev_err(dev, "Failed to read min baseline. err = %d\n", ret); 903 goto out; 904 } 905 min_baseline = ret; 906 907 dev_dbg(dev, "Baseline report successful. Max: %d Min: %d\n", 908 max_baseline, min_baseline); 909 ret = scnprintf(buf, PAGE_SIZE, "%d %d\n", max_baseline, min_baseline); 910 911 out: 912 return ret; 913 } 914 915 /* 916 * cyapa_get_wait_time_for_pwr_cmd 917 * 918 * Compute the amount of time we need to wait after updating the touchpad 919 * power mode. The touchpad needs to consume the incoming power mode set 920 * command at the current clock rate. 921 */ 922 923 static u16 cyapa_get_wait_time_for_pwr_cmd(u8 pwr_mode) 924 { 925 switch (pwr_mode) { 926 case PWR_MODE_FULL_ACTIVE: return 20; 927 case PWR_MODE_BTN_ONLY: return 20; 928 case PWR_MODE_OFF: return 20; 929 default: return cyapa_pwr_cmd_to_sleep_time(pwr_mode) + 50; 930 } 931 } 932 933 /* 934 * Set device power mode 935 * 936 * Write to the field to configure power state. Power states include : 937 * Full : Max scans and report rate. 938 * Idle : Report rate set by user specified time. 939 * ButtonOnly : No scans for fingers. When the button is triggered, 940 * a slave interrupt is asserted to notify host to wake up. 941 * Off : Only awake for i2c commands from host. No function for button 942 * or touch sensors. 943 * 944 * The power_mode command should conform to the following : 945 * Full : 0x3f 946 * Idle : Configurable from 20 to 1000ms. See note below for 947 * cyapa_sleep_time_to_pwr_cmd and cyapa_pwr_cmd_to_sleep_time 948 * ButtonOnly : 0x01 949 * Off : 0x00 950 * 951 * Device power mode can only be set when device is in operational mode. 952 */ 953 static int cyapa_gen3_set_power_mode(struct cyapa *cyapa, u8 power_mode, 954 u16 always_unused, enum cyapa_pm_stage pm_stage) 955 { 956 struct input_dev *input = cyapa->input; 957 u8 power; 958 int tries; 959 int sleep_time; 960 int interval; 961 int ret; 962 963 if (cyapa->state != CYAPA_STATE_OP) 964 return 0; 965 966 tries = SET_POWER_MODE_TRIES; 967 while (tries--) { 968 ret = cyapa_read_byte(cyapa, CYAPA_CMD_POWER_MODE); 969 if (ret >= 0) 970 break; 971 usleep_range(SET_POWER_MODE_DELAY, 2 * SET_POWER_MODE_DELAY); 972 } 973 if (ret < 0) 974 return ret; 975 976 /* 977 * Return early if the power mode to set is the same as the current 978 * one. 979 */ 980 if ((ret & PWR_MODE_MASK) == power_mode) 981 return 0; 982 983 sleep_time = (int)cyapa_get_wait_time_for_pwr_cmd(ret & PWR_MODE_MASK); 984 power = ret; 985 power &= ~PWR_MODE_MASK; 986 power |= power_mode & PWR_MODE_MASK; 987 tries = SET_POWER_MODE_TRIES; 988 while (tries--) { 989 ret = cyapa_write_byte(cyapa, CYAPA_CMD_POWER_MODE, power); 990 if (!ret) 991 break; 992 usleep_range(SET_POWER_MODE_DELAY, 2 * SET_POWER_MODE_DELAY); 993 } 994 995 /* 996 * Wait for the newly set power command to go in at the previous 997 * clock speed (scanrate) used by the touchpad firmware. Not 998 * doing so before issuing the next command may result in errors 999 * depending on the command's content. 1000 */ 1001 if (cyapa->operational && input && input->users && 1002 (pm_stage == CYAPA_PM_RUNTIME_SUSPEND || 1003 pm_stage == CYAPA_PM_RUNTIME_RESUME)) { 1004 /* Try to polling in 120Hz, read may fail, just ignore it. */ 1005 interval = 1000 / 120; 1006 while (sleep_time > 0) { 1007 if (sleep_time > interval) 1008 msleep(interval); 1009 else 1010 msleep(sleep_time); 1011 sleep_time -= interval; 1012 cyapa_gen3_try_poll_handler(cyapa); 1013 } 1014 } else { 1015 msleep(sleep_time); 1016 } 1017 1018 return ret; 1019 } 1020 1021 static int cyapa_gen3_set_proximity(struct cyapa *cyapa, bool enable) 1022 { 1023 return -EOPNOTSUPP; 1024 } 1025 1026 static int cyapa_gen3_get_query_data(struct cyapa *cyapa) 1027 { 1028 u8 query_data[QUERY_DATA_SIZE]; 1029 int ret; 1030 1031 if (cyapa->state != CYAPA_STATE_OP) 1032 return -EBUSY; 1033 1034 ret = cyapa_read_block(cyapa, CYAPA_CMD_GROUP_QUERY, query_data); 1035 if (ret != QUERY_DATA_SIZE) 1036 return (ret < 0) ? ret : -EIO; 1037 1038 memcpy(&cyapa->product_id[0], &query_data[0], 5); 1039 cyapa->product_id[5] = '-'; 1040 memcpy(&cyapa->product_id[6], &query_data[5], 6); 1041 cyapa->product_id[12] = '-'; 1042 memcpy(&cyapa->product_id[13], &query_data[11], 2); 1043 cyapa->product_id[15] = '\0'; 1044 1045 cyapa->fw_maj_ver = query_data[15]; 1046 cyapa->fw_min_ver = query_data[16]; 1047 1048 cyapa->btn_capability = query_data[19] & CAPABILITY_BTN_MASK; 1049 1050 cyapa->gen = query_data[20] & 0x0f; 1051 1052 cyapa->max_abs_x = ((query_data[21] & 0xf0) << 4) | query_data[22]; 1053 cyapa->max_abs_y = ((query_data[21] & 0x0f) << 8) | query_data[23]; 1054 1055 cyapa->physical_size_x = 1056 ((query_data[24] & 0xf0) << 4) | query_data[25]; 1057 cyapa->physical_size_y = 1058 ((query_data[24] & 0x0f) << 8) | query_data[26]; 1059 1060 cyapa->max_z = 255; 1061 1062 return 0; 1063 } 1064 1065 static int cyapa_gen3_bl_query_data(struct cyapa *cyapa) 1066 { 1067 u8 bl_data[CYAPA_CMD_LEN]; 1068 int ret; 1069 1070 ret = cyapa_i2c_reg_read_block(cyapa, 0, CYAPA_CMD_LEN, bl_data); 1071 if (ret != CYAPA_CMD_LEN) 1072 return (ret < 0) ? ret : -EIO; 1073 1074 /* 1075 * This value will be updated again when entered application mode. 1076 * If TP failed to enter application mode, this fw version values 1077 * can be used as a reference. 1078 * This firmware version valid when fw image checksum is valid. 1079 */ 1080 if (bl_data[REG_BL_STATUS] == 1081 (BL_STATUS_RUNNING | BL_STATUS_CSUM_VALID)) { 1082 cyapa->fw_maj_ver = bl_data[GEN3_BL_IDLE_FW_MAJ_VER_OFFSET]; 1083 cyapa->fw_min_ver = bl_data[GEN3_BL_IDLE_FW_MIN_VER_OFFSET]; 1084 } 1085 1086 return 0; 1087 } 1088 1089 /* 1090 * Check if device is operational. 1091 * 1092 * An operational device is responding, has exited bootloader, and has 1093 * firmware supported by this driver. 1094 * 1095 * Returns: 1096 * -EBUSY no device or in bootloader 1097 * -EIO failure while reading from device 1098 * -EAGAIN device is still in bootloader 1099 * if ->state = CYAPA_STATE_BL_IDLE, device has invalid firmware 1100 * -EINVAL device is in operational mode, but not supported by this driver 1101 * 0 device is supported 1102 */ 1103 static int cyapa_gen3_do_operational_check(struct cyapa *cyapa) 1104 { 1105 struct device *dev = &cyapa->client->dev; 1106 int error; 1107 1108 switch (cyapa->state) { 1109 case CYAPA_STATE_BL_ACTIVE: 1110 error = cyapa_gen3_bl_deactivate(cyapa); 1111 if (error) { 1112 dev_err(dev, "failed to bl_deactivate: %d\n", error); 1113 return error; 1114 } 1115 1116 /* Fallthrough state */ 1117 case CYAPA_STATE_BL_IDLE: 1118 /* Try to get firmware version in bootloader mode. */ 1119 cyapa_gen3_bl_query_data(cyapa); 1120 1121 error = cyapa_gen3_bl_exit(cyapa); 1122 if (error) { 1123 dev_err(dev, "failed to bl_exit: %d\n", error); 1124 return error; 1125 } 1126 1127 /* Fallthrough state */ 1128 case CYAPA_STATE_OP: 1129 /* 1130 * Reading query data before going back to the full mode 1131 * may cause problems, so we set the power mode first here. 1132 */ 1133 error = cyapa_gen3_set_power_mode(cyapa, 1134 PWR_MODE_FULL_ACTIVE, 0, CYAPA_PM_ACTIVE); 1135 if (error) 1136 dev_err(dev, "%s: set full power mode failed: %d\n", 1137 __func__, error); 1138 error = cyapa_gen3_get_query_data(cyapa); 1139 if (error < 0) 1140 return error; 1141 1142 /* Only support firmware protocol gen3 */ 1143 if (cyapa->gen != CYAPA_GEN3) { 1144 dev_err(dev, "unsupported protocol version (%d)", 1145 cyapa->gen); 1146 return -EINVAL; 1147 } 1148 1149 /* Only support product ID starting with CYTRA */ 1150 if (memcmp(cyapa->product_id, product_id, 1151 strlen(product_id)) != 0) { 1152 dev_err(dev, "unsupported product ID (%s)\n", 1153 cyapa->product_id); 1154 return -EINVAL; 1155 } 1156 1157 return 0; 1158 1159 default: 1160 return -EIO; 1161 } 1162 return 0; 1163 } 1164 1165 /* 1166 * Return false, do not continue process 1167 * Return true, continue process. 1168 */ 1169 static bool cyapa_gen3_irq_cmd_handler(struct cyapa *cyapa) 1170 { 1171 /* Not gen3 irq command response, skip for continue. */ 1172 if (cyapa->gen != CYAPA_GEN3) 1173 return true; 1174 1175 if (cyapa->operational) 1176 return true; 1177 1178 /* 1179 * Driver in detecting or other interface function processing, 1180 * so, stop cyapa_gen3_irq_handler to continue process to 1181 * avoid unwanted to error detecting and processing. 1182 * 1183 * And also, avoid the periodically asserted interrupts to be processed 1184 * as touch inputs when gen3 failed to launch into application mode, 1185 * which will cause gen3 stays in bootloader mode. 1186 */ 1187 return false; 1188 } 1189 1190 static int cyapa_gen3_event_process(struct cyapa *cyapa, 1191 struct cyapa_reg_data *data) 1192 { 1193 struct input_dev *input = cyapa->input; 1194 int num_fingers; 1195 int i; 1196 1197 num_fingers = (data->finger_btn >> 4) & 0x0f; 1198 for (i = 0; i < num_fingers; i++) { 1199 const struct cyapa_touch *touch = &data->touches[i]; 1200 /* Note: touch->id range is 1 to 15; slots are 0 to 14. */ 1201 int slot = touch->id - 1; 1202 1203 input_mt_slot(input, slot); 1204 input_mt_report_slot_state(input, MT_TOOL_FINGER, true); 1205 input_report_abs(input, ABS_MT_POSITION_X, 1206 ((touch->xy_hi & 0xf0) << 4) | touch->x_lo); 1207 input_report_abs(input, ABS_MT_POSITION_Y, 1208 ((touch->xy_hi & 0x0f) << 8) | touch->y_lo); 1209 input_report_abs(input, ABS_MT_PRESSURE, touch->pressure); 1210 } 1211 1212 input_mt_sync_frame(input); 1213 1214 if (cyapa->btn_capability & CAPABILITY_LEFT_BTN_MASK) 1215 input_report_key(input, BTN_LEFT, 1216 !!(data->finger_btn & OP_DATA_LEFT_BTN)); 1217 if (cyapa->btn_capability & CAPABILITY_MIDDLE_BTN_MASK) 1218 input_report_key(input, BTN_MIDDLE, 1219 !!(data->finger_btn & OP_DATA_MIDDLE_BTN)); 1220 if (cyapa->btn_capability & CAPABILITY_RIGHT_BTN_MASK) 1221 input_report_key(input, BTN_RIGHT, 1222 !!(data->finger_btn & OP_DATA_RIGHT_BTN)); 1223 input_sync(input); 1224 1225 return 0; 1226 } 1227 1228 static int cyapa_gen3_irq_handler(struct cyapa *cyapa) 1229 { 1230 struct device *dev = &cyapa->client->dev; 1231 struct cyapa_reg_data data; 1232 int ret; 1233 1234 ret = cyapa_read_block(cyapa, CYAPA_CMD_GROUP_DATA, (u8 *)&data); 1235 if (ret != sizeof(data)) { 1236 dev_err(dev, "failed to read report data, (%d)\n", ret); 1237 return -EINVAL; 1238 } 1239 1240 if ((data.device_status & OP_STATUS_SRC) != OP_STATUS_SRC || 1241 (data.device_status & OP_STATUS_DEV) != CYAPA_DEV_NORMAL || 1242 (data.finger_btn & OP_DATA_VALID) != OP_DATA_VALID) { 1243 dev_err(dev, "invalid device state bytes: %02x %02x\n", 1244 data.device_status, data.finger_btn); 1245 return -EINVAL; 1246 } 1247 1248 return cyapa_gen3_event_process(cyapa, &data); 1249 } 1250 1251 /* 1252 * This function will be called in the cyapa_gen3_set_power_mode function, 1253 * and it's known that it may failed in some situation after the set power 1254 * mode command was sent. So this function is aimed to avoid the knwon 1255 * and unwanted output I2C and data parse error messages. 1256 */ 1257 static int cyapa_gen3_try_poll_handler(struct cyapa *cyapa) 1258 { 1259 struct cyapa_reg_data data; 1260 int ret; 1261 1262 ret = cyapa_read_block(cyapa, CYAPA_CMD_GROUP_DATA, (u8 *)&data); 1263 if (ret != sizeof(data)) 1264 return -EINVAL; 1265 1266 if ((data.device_status & OP_STATUS_SRC) != OP_STATUS_SRC || 1267 (data.device_status & OP_STATUS_DEV) != CYAPA_DEV_NORMAL || 1268 (data.finger_btn & OP_DATA_VALID) != OP_DATA_VALID) 1269 return -EINVAL; 1270 1271 return cyapa_gen3_event_process(cyapa, &data); 1272 1273 } 1274 1275 static int cyapa_gen3_initialize(struct cyapa *cyapa) { return 0; } 1276 static int cyapa_gen3_bl_initiate(struct cyapa *cyapa, 1277 const struct firmware *fw) { return 0; } 1278 static int cyapa_gen3_empty_output_data(struct cyapa *cyapa, 1279 u8 *buf, int *len, cb_sort func) { return 0; } 1280 1281 const struct cyapa_dev_ops cyapa_gen3_ops = { 1282 .check_fw = cyapa_gen3_check_fw, 1283 .bl_enter = cyapa_gen3_bl_enter, 1284 .bl_activate = cyapa_gen3_bl_activate, 1285 .update_fw = cyapa_gen3_do_fw_update, 1286 .bl_deactivate = cyapa_gen3_bl_deactivate, 1287 .bl_initiate = cyapa_gen3_bl_initiate, 1288 1289 .show_baseline = cyapa_gen3_show_baseline, 1290 .calibrate_store = cyapa_gen3_do_calibrate, 1291 1292 .initialize = cyapa_gen3_initialize, 1293 1294 .state_parse = cyapa_gen3_state_parse, 1295 .operational_check = cyapa_gen3_do_operational_check, 1296 1297 .irq_handler = cyapa_gen3_irq_handler, 1298 .irq_cmd_handler = cyapa_gen3_irq_cmd_handler, 1299 .sort_empty_output_data = cyapa_gen3_empty_output_data, 1300 .set_power_mode = cyapa_gen3_set_power_mode, 1301 1302 .set_proximity = cyapa_gen3_set_proximity, 1303 }; 1304