xref: /openbmc/linux/drivers/input/mouse/alps.h (revision fca3aa16)
1 /*
2  * ALPS touchpad PS/2 mouse driver
3  *
4  * Copyright (c) 2003 Peter Osterlund <petero2@telia.com>
5  * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
6  *
7  * This program is free software; you can redistribute it and/or modify it
8  * under the terms of the GNU General Public License version 2 as published by
9  * the Free Software Foundation.
10  */
11 
12 #ifndef _ALPS_H
13 #define _ALPS_H
14 
15 #include <linux/input/mt.h>
16 
17 #define ALPS_PROTO_V1		0x100
18 #define ALPS_PROTO_V2		0x200
19 #define ALPS_PROTO_V3		0x300
20 #define ALPS_PROTO_V3_RUSHMORE	0x310
21 #define ALPS_PROTO_V4		0x400
22 #define ALPS_PROTO_V5		0x500
23 #define ALPS_PROTO_V6		0x600
24 #define ALPS_PROTO_V7		0x700	/* t3btl t4s */
25 #define ALPS_PROTO_V8		0x800	/* SS4btl SS4s */
26 #define ALPS_PROTO_V9		0x900	/* ss3btl */
27 
28 #define MAX_TOUCHES	4
29 
30 #define DOLPHIN_COUNT_PER_ELECTRODE	64
31 #define DOLPHIN_PROFILE_XOFFSET		8	/* x-electrode offset */
32 #define DOLPHIN_PROFILE_YOFFSET		1	/* y-electrode offset */
33 
34 /*
35  * enum SS4_PACKET_ID - defines the packet type for V8
36  * SS4_PACKET_ID_IDLE: There's no finger and no button activity.
37  * SS4_PACKET_ID_ONE: There's one finger on touchpad
38  *  or there's button activities.
39  * SS4_PACKET_ID_TWO: There's two or more fingers on touchpad
40  * SS4_PACKET_ID_MULTI: There's three or more fingers on touchpad
41  * SS4_PACKET_ID_STICK: A stick pointer packet
42 */
43 enum SS4_PACKET_ID {
44 	SS4_PACKET_ID_IDLE = 0,
45 	SS4_PACKET_ID_ONE,
46 	SS4_PACKET_ID_TWO,
47 	SS4_PACKET_ID_MULTI,
48 	SS4_PACKET_ID_STICK,
49 };
50 
51 #define SS4_COUNT_PER_ELECTRODE		256
52 #define SS4_NUMSENSOR_XOFFSET		7
53 #define SS4_NUMSENSOR_YOFFSET		7
54 #define SS4_MIN_PITCH_MM		50
55 
56 #define SS4_MASK_NORMAL_BUTTONS		0x07
57 
58 #define SS4PLUS_COUNT_PER_ELECTRODE	128
59 #define SS4PLUS_NUMSENSOR_XOFFSET	16
60 #define SS4PLUS_NUMSENSOR_YOFFSET	5
61 #define SS4PLUS_MIN_PITCH_MM		37
62 
63 #define IS_SS4PLUS_DEV(_b)	(((_b[0]) == 0x73) &&	\
64 				 ((_b[1]) == 0x03) &&	\
65 				 ((_b[2]) == 0x28)		\
66 				)
67 
68 #define SS4_IS_IDLE_V2(_b)	(((_b[0]) == 0x18) &&		\
69 				 ((_b[1]) == 0x10) &&		\
70 				 ((_b[2]) == 0x00) &&		\
71 				 ((_b[3] & 0x88) == 0x08) &&	\
72 				 ((_b[4]) == 0x10) &&		\
73 				 ((_b[5]) == 0x00)		\
74 				)
75 
76 #define SS4_1F_X_V2(_b)		(((_b[0]) & 0x0007) |		\
77 				 ((_b[1] << 3) & 0x0078) |	\
78 				 ((_b[1] << 2) & 0x0380) |	\
79 				 ((_b[2] << 5) & 0x1C00)	\
80 				)
81 
82 #define SS4_1F_Y_V2(_b)		(((_b[2]) & 0x000F) |		\
83 				 ((_b[3] >> 2) & 0x0030) |	\
84 				 ((_b[4] << 6) & 0x03C0) |	\
85 				 ((_b[4] << 5) & 0x0C00)	\
86 				)
87 
88 #define SS4_1F_Z_V2(_b)		(((_b[5]) & 0x0F) |		\
89 				 ((_b[5] >> 1) & 0x70) |	\
90 				 ((_b[4]) & 0x80)		\
91 				)
92 
93 #define SS4_1F_LFB_V2(_b)	(((_b[2] >> 4) & 0x01) == 0x01)
94 
95 #define SS4_MF_LF_V2(_b, _i)	((_b[1 + (_i) * 3] & 0x0004) == 0x0004)
96 
97 #define SS4_BTN_V2(_b)		((_b[0] >> 5) & SS4_MASK_NORMAL_BUTTONS)
98 
99 #define SS4_STD_MF_X_V2(_b, _i)	(((_b[0 + (_i) * 3] << 5) & 0x00E0) |	\
100 				 ((_b[1 + _i * 3]  << 5) & 0x1F00)	\
101 				)
102 
103 #define SS4_PLUS_STD_MF_X_V2(_b, _i) (((_b[0 + (_i) * 3] << 4) & 0x0070) | \
104 				 ((_b[1 + (_i) * 3]  << 4) & 0x0F80)	\
105 				)
106 
107 #define SS4_STD_MF_Y_V2(_b, _i)	(((_b[1 + (_i) * 3] << 3) & 0x0010) |	\
108 				 ((_b[2 + (_i) * 3] << 5) & 0x01E0) |	\
109 				 ((_b[2 + (_i) * 3] << 4) & 0x0E00)	\
110 				)
111 
112 #define SS4_BTL_MF_X_V2(_b, _i)	(SS4_STD_MF_X_V2(_b, _i) |		\
113 				 ((_b[0 + (_i) * 3] >> 3) & 0x0010)	\
114 				)
115 
116 #define SS4_PLUS_BTL_MF_X_V2(_b, _i) (SS4_PLUS_STD_MF_X_V2(_b, _i) |	\
117 				 ((_b[0 + (_i) * 3] >> 4) & 0x0008)	\
118 				)
119 
120 #define SS4_BTL_MF_Y_V2(_b, _i)	(SS4_STD_MF_Y_V2(_b, _i) | \
121 				 ((_b[0 + (_i) * 3] >> 3) & 0x0008)	\
122 				)
123 
124 #define SS4_MF_Z_V2(_b, _i)	(((_b[1 + (_i) * 3]) & 0x0001) |	\
125 				 ((_b[1 + (_i) * 3] >> 1) & 0x0002)	\
126 				)
127 
128 #define SS4_IS_MF_CONTINUE(_b)	((_b[2] & 0x10) == 0x10)
129 #define SS4_IS_5F_DETECTED(_b)	((_b[2] & 0x10) == 0x10)
130 
131 #define SS4_TS_X_V2(_b)		(s8)(				\
132 				 ((_b[0] & 0x01) << 7) |	\
133 				 (_b[1] & 0x7F)		\
134 				)
135 
136 #define SS4_TS_Y_V2(_b)		-(s8)(				\
137 				 ((_b[3] & 0x01) << 7) |	\
138 				 (_b[2] & 0x7F)		\
139 				)
140 
141 #define SS4_TS_Z_V2(_b)		(s8)(_b[4] & 0x7F)
142 
143 
144 #define SS4_MFPACKET_NO_AX		8160	/* X-Coordinate value */
145 #define SS4_MFPACKET_NO_AY		4080	/* Y-Coordinate value */
146 #define SS4_MFPACKET_NO_AX_BL		8176	/* Buttonless X-Coord value */
147 #define SS4_MFPACKET_NO_AY_BL		4088	/* Buttonless Y-Coord value */
148 #define SS4_PLUS_MFPACKET_NO_AX		4080	/* SS4 PLUS, X */
149 #define SS4_PLUS_MFPACKET_NO_AX_BL	4088	/* Buttonless SS4 PLUS, X */
150 
151 /*
152  * enum V7_PACKET_ID - defines the packet type for V7
153  * V7_PACKET_ID_IDLE: There's no finger and no button activity.
154  * V7_PACKET_ID_TWO: There's one or two non-resting fingers on touchpad
155  *  or there's button activities.
156  * V7_PACKET_ID_MULTI: There are at least three non-resting fingers.
157  * V7_PACKET_ID_NEW: The finger position in slot is not continues from
158  *  previous packet.
159 */
160 enum V7_PACKET_ID {
161 	 V7_PACKET_ID_IDLE,
162 	 V7_PACKET_ID_TWO,
163 	 V7_PACKET_ID_MULTI,
164 	 V7_PACKET_ID_NEW,
165 	 V7_PACKET_ID_UNKNOWN,
166 };
167 
168 /**
169  * struct alps_protocol_info - information about protocol used by a device
170  * @version: Indicates V1/V2/V3/...
171  * @byte0: Helps figure out whether a position report packet matches the
172  *   known format for this model.  The first byte of the report, ANDed with
173  *   mask0, should match byte0.
174  * @mask0: The mask used to check the first byte of the report.
175  * @flags: Additional device capabilities (passthrough port, trackstick, etc.).
176  */
177 struct alps_protocol_info {
178 	u16 version;
179 	u8 byte0, mask0;
180 	unsigned int flags;
181 };
182 
183 /**
184  * struct alps_model_info - touchpad ID table
185  * @signature: E7 response string to match.
186  * @protocol_info: information about protocol used by the device.
187  *
188  * Many (but not all) ALPS touchpads can be identified by looking at the
189  * values returned in the "E7 report" and/or the "EC report."  This table
190  * lists a number of such touchpads.
191  */
192 struct alps_model_info {
193 	u8 signature[3];
194 	struct alps_protocol_info protocol_info;
195 };
196 
197 /**
198  * struct alps_nibble_commands - encodings for register accesses
199  * @command: PS/2 command used for the nibble
200  * @data: Data supplied as an argument to the PS/2 command, if applicable
201  *
202  * The ALPS protocol uses magic sequences to transmit binary data to the
203  * touchpad, as it is generally not OK to send arbitrary bytes out the
204  * PS/2 port.  Each of the sequences in this table sends one nibble of the
205  * register address or (write) data.  Different versions of the ALPS protocol
206  * use slightly different encodings.
207  */
208 struct alps_nibble_commands {
209 	int command;
210 	unsigned char data;
211 };
212 
213 struct alps_bitmap_point {
214 	int start_bit;
215 	int num_bits;
216 };
217 
218 /**
219  * struct alps_fields - decoded version of the report packet
220  * @x_map: Bitmap of active X positions for MT.
221  * @y_map: Bitmap of active Y positions for MT.
222  * @fingers: Number of fingers for MT.
223  * @pressure: Pressure.
224  * @st: position for ST.
225  * @mt: position for MT.
226  * @first_mp: Packet is the first of a multi-packet report.
227  * @is_mp: Packet is part of a multi-packet report.
228  * @left: Left touchpad button is active.
229  * @right: Right touchpad button is active.
230  * @middle: Middle touchpad button is active.
231  * @ts_left: Left trackstick button is active.
232  * @ts_right: Right trackstick button is active.
233  * @ts_middle: Middle trackstick button is active.
234  */
235 struct alps_fields {
236 	unsigned int x_map;
237 	unsigned int y_map;
238 	unsigned int fingers;
239 
240 	int pressure;
241 	struct input_mt_pos st;
242 	struct input_mt_pos mt[MAX_TOUCHES];
243 
244 	unsigned int first_mp:1;
245 	unsigned int is_mp:1;
246 
247 	unsigned int left:1;
248 	unsigned int right:1;
249 	unsigned int middle:1;
250 
251 	unsigned int ts_left:1;
252 	unsigned int ts_right:1;
253 	unsigned int ts_middle:1;
254 };
255 
256 /**
257  * struct alps_data - private data structure for the ALPS driver
258  * @psmouse: Pointer to parent psmouse device
259  * @dev2: Trackstick device (can be NULL).
260  * @dev3: Generic PS/2 mouse (can be NULL, delayed registering).
261  * @phys2: Physical path for the trackstick device.
262  * @phys3: Physical path for the generic PS/2 mouse.
263  * @dev3_register_work: Delayed work for registering PS/2 mouse.
264  * @nibble_commands: Command mapping used for touchpad register accesses.
265  * @addr_command: Command used to tell the touchpad that a register address
266  *   follows.
267  * @proto_version: Indicates V1/V2/V3/...
268  * @byte0: Helps figure out whether a position report packet matches the
269  *   known format for this model.  The first byte of the report, ANDed with
270  *   mask0, should match byte0.
271  * @mask0: The mask used to check the first byte of the report.
272  * @fw_ver: cached copy of firmware version (EC report)
273  * @flags: Additional device capabilities (passthrough port, trackstick, etc.).
274  * @x_max: Largest possible X position value.
275  * @y_max: Largest possible Y position value.
276  * @x_bits: Number of X bits in the MT bitmap.
277  * @y_bits: Number of Y bits in the MT bitmap.
278  * @hw_init: Protocol-specific hardware init function.
279  * @process_packet: Protocol-specific function to process a report packet.
280  * @decode_fields: Protocol-specific function to read packet bitfields.
281  * @set_abs_params: Protocol-specific function to configure the input_dev.
282  * @prev_fin: Finger bit from previous packet.
283  * @multi_packet: Multi-packet data in progress.
284  * @multi_data: Saved multi-packet data.
285  * @f: Decoded packet data fields.
286  * @quirks: Bitmap of ALPS_QUIRK_*.
287  * @timer: Timer for flushing out the final report packet in the stream.
288  */
289 struct alps_data {
290 	struct psmouse *psmouse;
291 	struct input_dev *dev2;
292 	struct input_dev *dev3;
293 	char phys2[32];
294 	char phys3[32];
295 	struct delayed_work dev3_register_work;
296 
297 	/* these are autodetected when the device is identified */
298 	const struct alps_nibble_commands *nibble_commands;
299 	int addr_command;
300 	u16 proto_version;
301 	u8 byte0, mask0;
302 	u8 dev_id[3];
303 	u8 fw_ver[3];
304 	int flags;
305 	int x_max;
306 	int y_max;
307 	int x_bits;
308 	int y_bits;
309 	unsigned int x_res;
310 	unsigned int y_res;
311 
312 	int (*hw_init)(struct psmouse *psmouse);
313 	void (*process_packet)(struct psmouse *psmouse);
314 	int (*decode_fields)(struct alps_fields *f, unsigned char *p,
315 			      struct psmouse *psmouse);
316 	void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1);
317 
318 	int prev_fin;
319 	int multi_packet;
320 	int second_touch;
321 	unsigned char multi_data[6];
322 	struct alps_fields f;
323 	u8 quirks;
324 	struct timer_list timer;
325 };
326 
327 #define ALPS_QUIRK_TRACKSTICK_BUTTONS	1 /* trakcstick buttons in trackstick packet */
328 
329 #ifdef CONFIG_MOUSE_PS2_ALPS
330 int alps_detect(struct psmouse *psmouse, bool set_properties);
331 int alps_init(struct psmouse *psmouse);
332 #else
333 inline int alps_detect(struct psmouse *psmouse, bool set_properties)
334 {
335 	return -ENOSYS;
336 }
337 inline int alps_init(struct psmouse *psmouse)
338 {
339 	return -ENOSYS;
340 }
341 #endif /* CONFIG_MOUSE_PS2_ALPS */
342 
343 #endif
344