1 /*
2  * twl6040-vibra.c - TWL6040 Vibrator driver
3  *
4  * Author:      Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
5  * Author:      Misael Lopez Cruz <misael.lopez@ti.com>
6  *
7  * Copyright:   (C) 2011 Texas Instruments, Inc.
8  *
9  * Based on twl4030-vibra.c by Henrik Saari <henrik.saari@nokia.com>
10  *				Felipe Balbi <felipe.balbi@nokia.com>
11  *				Jari Vanhala <ext-javi.vanhala@nokia.com>
12  *
13  * This program is free software; you can redistribute it and/or modify
14  * it under the terms of the GNU General Public License version 2 as
15  * published by the Free Software Foundation.
16  *
17  * This program is distributed in the hope that it will be useful, but
18  * WITHOUT ANY WARRANTY; without even the implied warranty of
19  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
20  * General Public License for more details.
21  *
22  * You should have received a copy of the GNU General Public License
23  * along with this program; if not, write to the Free Software
24  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
25  * 02110-1301 USA
26  *
27  */
28 #include <linux/module.h>
29 #include <linux/platform_device.h>
30 #include <linux/of.h>
31 #include <linux/workqueue.h>
32 #include <linux/input.h>
33 #include <linux/mfd/twl6040.h>
34 #include <linux/slab.h>
35 #include <linux/delay.h>
36 #include <linux/regulator/consumer.h>
37 
38 #define EFFECT_DIR_180_DEG	0x8000
39 
40 /* Recommended modulation index 85% */
41 #define TWL6040_VIBRA_MOD	85
42 
43 #define TWL6040_NUM_SUPPLIES 2
44 
45 struct vibra_info {
46 	struct device *dev;
47 	struct input_dev *input_dev;
48 	struct workqueue_struct *workqueue;
49 	struct work_struct play_work;
50 	struct mutex mutex;
51 	int irq;
52 
53 	bool enabled;
54 	int weak_speed;
55 	int strong_speed;
56 	int direction;
57 
58 	unsigned int vibldrv_res;
59 	unsigned int vibrdrv_res;
60 	unsigned int viblmotor_res;
61 	unsigned int vibrmotor_res;
62 
63 	struct regulator_bulk_data supplies[TWL6040_NUM_SUPPLIES];
64 
65 	struct twl6040 *twl6040;
66 };
67 
68 static irqreturn_t twl6040_vib_irq_handler(int irq, void *data)
69 {
70 	struct vibra_info *info = data;
71 	struct twl6040 *twl6040 = info->twl6040;
72 	u8 status;
73 
74 	status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
75 	if (status & TWL6040_VIBLOCDET) {
76 		dev_warn(info->dev, "Left Vibrator overcurrent detected\n");
77 		twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLL,
78 				   TWL6040_VIBENA);
79 	}
80 	if (status & TWL6040_VIBROCDET) {
81 		dev_warn(info->dev, "Right Vibrator overcurrent detected\n");
82 		twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLR,
83 				   TWL6040_VIBENA);
84 	}
85 
86 	return IRQ_HANDLED;
87 }
88 
89 static void twl6040_vibra_enable(struct vibra_info *info)
90 {
91 	struct twl6040 *twl6040 = info->twl6040;
92 	int ret;
93 
94 	ret = regulator_bulk_enable(ARRAY_SIZE(info->supplies), info->supplies);
95 	if (ret) {
96 		dev_err(info->dev, "failed to enable regulators %d\n", ret);
97 		return;
98 	}
99 
100 	twl6040_power(info->twl6040, 1);
101 	if (twl6040_get_revid(twl6040) <= TWL6040_REV_ES1_1) {
102 		/*
103 		 * ERRATA: Disable overcurrent protection for at least
104 		 * 3ms when enabling vibrator drivers to avoid false
105 		 * overcurrent detection
106 		 */
107 		twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
108 				  TWL6040_VIBENA | TWL6040_VIBCTRL);
109 		twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
110 				  TWL6040_VIBENA | TWL6040_VIBCTRL);
111 		usleep_range(3000, 3500);
112 	}
113 
114 	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
115 			  TWL6040_VIBENA);
116 	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
117 			  TWL6040_VIBENA);
118 
119 	info->enabled = true;
120 }
121 
122 static void twl6040_vibra_disable(struct vibra_info *info)
123 {
124 	struct twl6040 *twl6040 = info->twl6040;
125 
126 	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, 0x00);
127 	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, 0x00);
128 	twl6040_power(info->twl6040, 0);
129 
130 	regulator_bulk_disable(ARRAY_SIZE(info->supplies), info->supplies);
131 
132 	info->enabled = false;
133 }
134 
135 static u8 twl6040_vibra_code(int vddvib, int vibdrv_res, int motor_res,
136 			     int speed, int direction)
137 {
138 	int vpk, max_code;
139 	u8 vibdat;
140 
141 	/* output swing */
142 	vpk = (vddvib * motor_res * TWL6040_VIBRA_MOD) /
143 		(100 * (vibdrv_res + motor_res));
144 
145 	/* 50mV per VIBDAT code step */
146 	max_code = vpk / 50;
147 	if (max_code > TWL6040_VIBDAT_MAX)
148 		max_code = TWL6040_VIBDAT_MAX;
149 
150 	/* scale speed to max allowed code */
151 	vibdat = (u8)((speed * max_code) / USHRT_MAX);
152 
153 	/* 2's complement for direction > 180 degrees */
154 	vibdat *= direction;
155 
156 	return vibdat;
157 }
158 
159 static void twl6040_vibra_set_effect(struct vibra_info *info)
160 {
161 	struct twl6040 *twl6040 = info->twl6040;
162 	u8 vibdatl, vibdatr;
163 	int volt;
164 
165 	/* weak motor */
166 	volt = regulator_get_voltage(info->supplies[0].consumer) / 1000;
167 	vibdatl = twl6040_vibra_code(volt, info->vibldrv_res,
168 				     info->viblmotor_res,
169 				     info->weak_speed, info->direction);
170 
171 	/* strong motor */
172 	volt = regulator_get_voltage(info->supplies[1].consumer) / 1000;
173 	vibdatr = twl6040_vibra_code(volt, info->vibrdrv_res,
174 				     info->vibrmotor_res,
175 				     info->strong_speed, info->direction);
176 
177 	twl6040_reg_write(twl6040, TWL6040_REG_VIBDATL, vibdatl);
178 	twl6040_reg_write(twl6040, TWL6040_REG_VIBDATR, vibdatr);
179 }
180 
181 static void vibra_play_work(struct work_struct *work)
182 {
183 	struct vibra_info *info = container_of(work,
184 				struct vibra_info, play_work);
185 
186 	mutex_lock(&info->mutex);
187 
188 	if (info->weak_speed || info->strong_speed) {
189 		if (!info->enabled)
190 			twl6040_vibra_enable(info);
191 
192 		twl6040_vibra_set_effect(info);
193 	} else if (info->enabled)
194 		twl6040_vibra_disable(info);
195 
196 	mutex_unlock(&info->mutex);
197 }
198 
199 static int vibra_play(struct input_dev *input, void *data,
200 		      struct ff_effect *effect)
201 {
202 	struct vibra_info *info = input_get_drvdata(input);
203 	int ret;
204 
205 	/* Do not allow effect, while the routing is set to use audio */
206 	ret = twl6040_get_vibralr_status(info->twl6040);
207 	if (ret & TWL6040_VIBSEL) {
208 		dev_info(&input->dev, "Vibra is configured for audio\n");
209 		return -EBUSY;
210 	}
211 
212 	info->weak_speed = effect->u.rumble.weak_magnitude;
213 	info->strong_speed = effect->u.rumble.strong_magnitude;
214 	info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1;
215 
216 	ret = queue_work(info->workqueue, &info->play_work);
217 	if (!ret) {
218 		dev_info(&input->dev, "work is already on queue\n");
219 		return ret;
220 	}
221 
222 	return 0;
223 }
224 
225 static void twl6040_vibra_close(struct input_dev *input)
226 {
227 	struct vibra_info *info = input_get_drvdata(input);
228 
229 	cancel_work_sync(&info->play_work);
230 
231 	mutex_lock(&info->mutex);
232 
233 	if (info->enabled)
234 		twl6040_vibra_disable(info);
235 
236 	mutex_unlock(&info->mutex);
237 }
238 
239 static int __maybe_unused twl6040_vibra_suspend(struct device *dev)
240 {
241 	struct platform_device *pdev = to_platform_device(dev);
242 	struct vibra_info *info = platform_get_drvdata(pdev);
243 
244 	mutex_lock(&info->mutex);
245 
246 	if (info->enabled)
247 		twl6040_vibra_disable(info);
248 
249 	mutex_unlock(&info->mutex);
250 
251 	return 0;
252 }
253 
254 static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL);
255 
256 static int twl6040_vibra_probe(struct platform_device *pdev)
257 {
258 	struct device *twl6040_core_dev = pdev->dev.parent;
259 	struct device_node *twl6040_core_node;
260 	struct vibra_info *info;
261 	int vddvibl_uV = 0;
262 	int vddvibr_uV = 0;
263 	int error;
264 
265 	twl6040_core_node = of_find_node_by_name(twl6040_core_dev->of_node,
266 						 "vibra");
267 	if (!twl6040_core_node) {
268 		dev_err(&pdev->dev, "parent of node is missing?\n");
269 		return -EINVAL;
270 	}
271 
272 	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
273 	if (!info) {
274 		of_node_put(twl6040_core_node);
275 		dev_err(&pdev->dev, "couldn't allocate memory\n");
276 		return -ENOMEM;
277 	}
278 
279 	info->dev = &pdev->dev;
280 
281 	info->twl6040 = dev_get_drvdata(pdev->dev.parent);
282 
283 	of_property_read_u32(twl6040_core_node, "ti,vibldrv-res",
284 			     &info->vibldrv_res);
285 	of_property_read_u32(twl6040_core_node, "ti,vibrdrv-res",
286 			     &info->vibrdrv_res);
287 	of_property_read_u32(twl6040_core_node, "ti,viblmotor-res",
288 			     &info->viblmotor_res);
289 	of_property_read_u32(twl6040_core_node, "ti,vibrmotor-res",
290 			     &info->vibrmotor_res);
291 	of_property_read_u32(twl6040_core_node, "ti,vddvibl-uV", &vddvibl_uV);
292 	of_property_read_u32(twl6040_core_node, "ti,vddvibr-uV", &vddvibr_uV);
293 
294 	of_node_put(twl6040_core_node);
295 
296 	if ((!info->vibldrv_res && !info->viblmotor_res) ||
297 	    (!info->vibrdrv_res && !info->vibrmotor_res)) {
298 		dev_err(info->dev, "invalid vibra driver/motor resistance\n");
299 		return -EINVAL;
300 	}
301 
302 	info->irq = platform_get_irq(pdev, 0);
303 	if (info->irq < 0) {
304 		dev_err(info->dev, "invalid irq\n");
305 		return -EINVAL;
306 	}
307 
308 	mutex_init(&info->mutex);
309 
310 	error = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
311 					  twl6040_vib_irq_handler,
312 					  IRQF_ONESHOT,
313 					  "twl6040_irq_vib", info);
314 	if (error) {
315 		dev_err(info->dev, "VIB IRQ request failed: %d\n", error);
316 		return error;
317 	}
318 
319 	info->supplies[0].supply = "vddvibl";
320 	info->supplies[1].supply = "vddvibr";
321 	/*
322 	 * When booted with Device tree the regulators are attached to the
323 	 * parent device (twl6040 MFD core)
324 	 */
325 	error = devm_regulator_bulk_get(twl6040_core_dev,
326 					ARRAY_SIZE(info->supplies),
327 					info->supplies);
328 	if (error) {
329 		dev_err(info->dev, "couldn't get regulators %d\n", error);
330 		return error;
331 	}
332 
333 	if (vddvibl_uV) {
334 		error = regulator_set_voltage(info->supplies[0].consumer,
335 					      vddvibl_uV, vddvibl_uV);
336 		if (error) {
337 			dev_err(info->dev, "failed to set VDDVIBL volt %d\n",
338 				error);
339 			return error;
340 		}
341 	}
342 
343 	if (vddvibr_uV) {
344 		error = regulator_set_voltage(info->supplies[1].consumer,
345 					      vddvibr_uV, vddvibr_uV);
346 		if (error) {
347 			dev_err(info->dev, "failed to set VDDVIBR volt %d\n",
348 				error);
349 			return error;
350 		}
351 	}
352 
353 	INIT_WORK(&info->play_work, vibra_play_work);
354 
355 	info->input_dev = devm_input_allocate_device(&pdev->dev);
356 	if (!info->input_dev) {
357 		dev_err(info->dev, "couldn't allocate input device\n");
358 		return -ENOMEM;
359 	}
360 
361 	input_set_drvdata(info->input_dev, info);
362 
363 	info->input_dev->name = "twl6040:vibrator";
364 	info->input_dev->id.version = 1;
365 	info->input_dev->dev.parent = pdev->dev.parent;
366 	info->input_dev->close = twl6040_vibra_close;
367 	__set_bit(FF_RUMBLE, info->input_dev->ffbit);
368 
369 	error = input_ff_create_memless(info->input_dev, NULL, vibra_play);
370 	if (error) {
371 		dev_err(info->dev, "couldn't register vibrator to FF\n");
372 		return error;
373 	}
374 
375 	error = input_register_device(info->input_dev);
376 	if (error) {
377 		dev_err(info->dev, "couldn't register input device\n");
378 		return error;
379 	}
380 
381 	platform_set_drvdata(pdev, info);
382 
383 	return 0;
384 }
385 
386 static struct platform_driver twl6040_vibra_driver = {
387 	.probe		= twl6040_vibra_probe,
388 	.driver		= {
389 		.name	= "twl6040-vibra",
390 		.pm	= &twl6040_vibra_pm_ops,
391 	},
392 };
393 module_platform_driver(twl6040_vibra_driver);
394 
395 MODULE_ALIAS("platform:twl6040-vibra");
396 MODULE_DESCRIPTION("TWL6040 Vibra driver");
397 MODULE_LICENSE("GPL");
398 MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>");
399 MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");
400