1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Supports for the button array on SoC tablets originally running 4 * Windows 8. 5 * 6 * (C) Copyright 2014 Intel Corporation 7 */ 8 9 #include <linux/module.h> 10 #include <linux/input.h> 11 #include <linux/init.h> 12 #include <linux/irq.h> 13 #include <linux/kernel.h> 14 #include <linux/acpi.h> 15 #include <linux/dmi.h> 16 #include <linux/gpio/consumer.h> 17 #include <linux/gpio_keys.h> 18 #include <linux/gpio.h> 19 #include <linux/platform_device.h> 20 21 static bool use_low_level_irq; 22 module_param(use_low_level_irq, bool, 0444); 23 MODULE_PARM_DESC(use_low_level_irq, "Use low-level triggered IRQ instead of edge triggered"); 24 25 struct soc_button_info { 26 const char *name; 27 int acpi_index; 28 unsigned int event_type; 29 unsigned int event_code; 30 bool autorepeat; 31 bool wakeup; 32 bool active_low; 33 }; 34 35 struct soc_device_data { 36 const struct soc_button_info *button_info; 37 int (*check)(struct device *dev); 38 }; 39 40 /* 41 * Some of the buttons like volume up/down are auto repeat, while others 42 * are not. To support both, we register two platform devices, and put 43 * buttons into them based on whether the key should be auto repeat. 44 */ 45 #define BUTTON_TYPES 2 46 47 struct soc_button_data { 48 struct platform_device *children[BUTTON_TYPES]; 49 }; 50 51 /* 52 * Some 2-in-1s which use the soc_button_array driver have this ugly issue in 53 * their DSDT where the _LID method modifies the irq-type settings of the GPIOs 54 * used for the power and home buttons. The intend of this AML code is to 55 * disable these buttons when the lid is closed. 56 * The AML does this by directly poking the GPIO controllers registers. This is 57 * problematic because when re-enabling the irq, which happens whenever _LID 58 * gets called with the lid open (e.g. on boot and on resume), it sets the 59 * irq-type to IRQ_TYPE_LEVEL_LOW. Where as the gpio-keys driver programs the 60 * type to, and expects it to be, IRQ_TYPE_EDGE_BOTH. 61 * To work around this we don't set gpio_keys_button.gpio on these 2-in-1s, 62 * instead we get the irq for the GPIO ourselves, configure it as 63 * IRQ_TYPE_LEVEL_LOW (to match how the _LID AML code configures it) and pass 64 * the irq in gpio_keys_button.irq. Below is a list of affected devices. 65 */ 66 static const struct dmi_system_id dmi_use_low_level_irq[] = { 67 { 68 /* 69 * Acer Switch 10 SW5-012. _LID method messes with home- and 70 * power-button GPIO IRQ settings. When (re-)enabling the irq 71 * it ors in its own flags without clearing the previous set 72 * ones, leading to an irq-type of IRQ_TYPE_LEVEL_LOW | 73 * IRQ_TYPE_LEVEL_HIGH causing a continuous interrupt storm. 74 */ 75 .matches = { 76 DMI_MATCH(DMI_SYS_VENDOR, "Acer"), 77 DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"), 78 }, 79 }, 80 { 81 /* Acer Switch V 10 SW5-017, same issue as Acer Switch 10 SW5-012. */ 82 .matches = { 83 DMI_MATCH(DMI_SYS_VENDOR, "Acer"), 84 DMI_MATCH(DMI_PRODUCT_NAME, "SW5-017"), 85 }, 86 }, 87 { 88 /* 89 * Acer One S1003. _LID method messes with power-button GPIO 90 * IRQ settings, leading to a non working power-button. 91 */ 92 .matches = { 93 DMI_MATCH(DMI_SYS_VENDOR, "Acer"), 94 DMI_MATCH(DMI_PRODUCT_NAME, "One S1003"), 95 }, 96 }, 97 { 98 /* 99 * Lenovo Yoga Tab2 1051F/1051L, something messes with the home-button 100 * IRQ settings, leading to a non working home-button. 101 */ 102 .matches = { 103 DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), 104 DMI_MATCH(DMI_PRODUCT_NAME, "60073"), 105 DMI_MATCH(DMI_PRODUCT_VERSION, "1051"), 106 }, 107 }, 108 {} /* Terminating entry */ 109 }; 110 111 /* 112 * Some devices have a wrong entry which points to a GPIO which is 113 * required in another driver, so this driver must not claim it. 114 */ 115 static const struct dmi_system_id dmi_invalid_acpi_index[] = { 116 { 117 /* 118 * Lenovo Yoga Book X90F / X90L, the PNP0C40 home button entry 119 * points to a GPIO which is not a home button and which is 120 * required by the lenovo-yogabook driver. 121 */ 122 .matches = { 123 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Intel Corporation"), 124 DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "CHERRYVIEW D1 PLATFORM"), 125 DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "YETI-11"), 126 }, 127 .driver_data = (void *)1l, 128 }, 129 {} /* Terminating entry */ 130 }; 131 132 /* 133 * Get the Nth GPIO number from the ACPI object. 134 */ 135 static int soc_button_lookup_gpio(struct device *dev, int acpi_index, 136 int *gpio_ret, int *irq_ret) 137 { 138 struct gpio_desc *desc; 139 140 desc = gpiod_get_index(dev, NULL, acpi_index, GPIOD_ASIS); 141 if (IS_ERR(desc)) 142 return PTR_ERR(desc); 143 144 *gpio_ret = desc_to_gpio(desc); 145 *irq_ret = gpiod_to_irq(desc); 146 147 gpiod_put(desc); 148 149 return 0; 150 } 151 152 static struct platform_device * 153 soc_button_device_create(struct platform_device *pdev, 154 const struct soc_button_info *button_info, 155 bool autorepeat) 156 { 157 const struct soc_button_info *info; 158 struct platform_device *pd; 159 struct gpio_keys_button *gpio_keys; 160 struct gpio_keys_platform_data *gpio_keys_pdata; 161 const struct dmi_system_id *dmi_id; 162 int invalid_acpi_index = -1; 163 int error, gpio, irq; 164 int n_buttons = 0; 165 166 for (info = button_info; info->name; info++) 167 if (info->autorepeat == autorepeat) 168 n_buttons++; 169 170 gpio_keys_pdata = devm_kzalloc(&pdev->dev, 171 sizeof(*gpio_keys_pdata) + 172 sizeof(*gpio_keys) * n_buttons, 173 GFP_KERNEL); 174 if (!gpio_keys_pdata) 175 return ERR_PTR(-ENOMEM); 176 177 gpio_keys = (void *)(gpio_keys_pdata + 1); 178 n_buttons = 0; 179 180 dmi_id = dmi_first_match(dmi_invalid_acpi_index); 181 if (dmi_id) 182 invalid_acpi_index = (long)dmi_id->driver_data; 183 184 for (info = button_info; info->name; info++) { 185 if (info->autorepeat != autorepeat) 186 continue; 187 188 if (info->acpi_index == invalid_acpi_index) 189 continue; 190 191 error = soc_button_lookup_gpio(&pdev->dev, info->acpi_index, &gpio, &irq); 192 if (error || irq < 0) { 193 /* 194 * Skip GPIO if not present. Note we deliberately 195 * ignore -EPROBE_DEFER errors here. On some devices 196 * Intel is using so called virtual GPIOs which are not 197 * GPIOs at all but some way for AML code to check some 198 * random status bits without need a custom opregion. 199 * In some cases the resources table we parse points to 200 * such a virtual GPIO, since these are not real GPIOs 201 * we do not have a driver for these so they will never 202 * show up, therefore we ignore -EPROBE_DEFER. 203 */ 204 continue; 205 } 206 207 /* See dmi_use_low_level_irq[] comment */ 208 if (!autorepeat && (use_low_level_irq || 209 dmi_check_system(dmi_use_low_level_irq))) { 210 irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); 211 gpio_keys[n_buttons].irq = irq; 212 gpio_keys[n_buttons].gpio = -ENOENT; 213 } else { 214 gpio_keys[n_buttons].gpio = gpio; 215 } 216 217 gpio_keys[n_buttons].type = info->event_type; 218 gpio_keys[n_buttons].code = info->event_code; 219 gpio_keys[n_buttons].active_low = info->active_low; 220 gpio_keys[n_buttons].desc = info->name; 221 gpio_keys[n_buttons].wakeup = info->wakeup; 222 /* These devices often use cheap buttons, use 50 ms debounce */ 223 gpio_keys[n_buttons].debounce_interval = 50; 224 n_buttons++; 225 } 226 227 if (n_buttons == 0) { 228 error = -ENODEV; 229 goto err_free_mem; 230 } 231 232 gpio_keys_pdata->buttons = gpio_keys; 233 gpio_keys_pdata->nbuttons = n_buttons; 234 gpio_keys_pdata->rep = autorepeat; 235 236 pd = platform_device_register_resndata(&pdev->dev, "gpio-keys", 237 PLATFORM_DEVID_AUTO, NULL, 0, 238 gpio_keys_pdata, 239 sizeof(*gpio_keys_pdata)); 240 error = PTR_ERR_OR_ZERO(pd); 241 if (error) { 242 dev_err(&pdev->dev, 243 "failed registering gpio-keys: %d\n", error); 244 goto err_free_mem; 245 } 246 247 return pd; 248 249 err_free_mem: 250 devm_kfree(&pdev->dev, gpio_keys_pdata); 251 return ERR_PTR(error); 252 } 253 254 static int soc_button_get_acpi_object_int(const union acpi_object *obj) 255 { 256 if (obj->type != ACPI_TYPE_INTEGER) 257 return -1; 258 259 return obj->integer.value; 260 } 261 262 /* Parse a single ACPI0011 _DSD button descriptor */ 263 static int soc_button_parse_btn_desc(struct device *dev, 264 const union acpi_object *desc, 265 int collection_uid, 266 struct soc_button_info *info) 267 { 268 int upage, usage; 269 270 if (desc->type != ACPI_TYPE_PACKAGE || 271 desc->package.count != 5 || 272 /* First byte should be 1 (control) */ 273 soc_button_get_acpi_object_int(&desc->package.elements[0]) != 1 || 274 /* Third byte should be collection uid */ 275 soc_button_get_acpi_object_int(&desc->package.elements[2]) != 276 collection_uid) { 277 dev_err(dev, "Invalid ACPI Button Descriptor\n"); 278 return -ENODEV; 279 } 280 281 info->event_type = EV_KEY; 282 info->active_low = true; 283 info->acpi_index = 284 soc_button_get_acpi_object_int(&desc->package.elements[1]); 285 upage = soc_button_get_acpi_object_int(&desc->package.elements[3]); 286 usage = soc_button_get_acpi_object_int(&desc->package.elements[4]); 287 288 /* 289 * The UUID: fa6bd625-9ce8-470d-a2c7-b3ca36c4282e descriptors use HID 290 * usage page and usage codes, but otherwise the device is not HID 291 * compliant: it uses one irq per button instead of generating HID 292 * input reports and some buttons should generate wakeups where as 293 * others should not, so we cannot use the HID subsystem. 294 * 295 * Luckily all devices only use a few usage page + usage combinations, 296 * so we can simply check for the known combinations here. 297 */ 298 if (upage == 0x01 && usage == 0x81) { 299 info->name = "power"; 300 info->event_code = KEY_POWER; 301 info->wakeup = true; 302 } else if (upage == 0x01 && usage == 0xc6) { 303 info->name = "airplane mode switch"; 304 info->event_type = EV_SW; 305 info->event_code = SW_RFKILL_ALL; 306 info->active_low = false; 307 } else if (upage == 0x01 && usage == 0xca) { 308 info->name = "rotation lock switch"; 309 info->event_type = EV_SW; 310 info->event_code = SW_ROTATE_LOCK; 311 } else if (upage == 0x07 && usage == 0xe3) { 312 info->name = "home"; 313 info->event_code = KEY_LEFTMETA; 314 info->wakeup = true; 315 } else if (upage == 0x0c && usage == 0xe9) { 316 info->name = "volume_up"; 317 info->event_code = KEY_VOLUMEUP; 318 info->autorepeat = true; 319 } else if (upage == 0x0c && usage == 0xea) { 320 info->name = "volume_down"; 321 info->event_code = KEY_VOLUMEDOWN; 322 info->autorepeat = true; 323 } else { 324 dev_warn(dev, "Unknown button index %d upage %02x usage %02x, ignoring\n", 325 info->acpi_index, upage, usage); 326 info->name = "unknown"; 327 info->event_code = KEY_RESERVED; 328 } 329 330 return 0; 331 } 332 333 /* ACPI0011 _DSD btns descriptors UUID: fa6bd625-9ce8-470d-a2c7-b3ca36c4282e */ 334 static const u8 btns_desc_uuid[16] = { 335 0x25, 0xd6, 0x6b, 0xfa, 0xe8, 0x9c, 0x0d, 0x47, 336 0xa2, 0xc7, 0xb3, 0xca, 0x36, 0xc4, 0x28, 0x2e 337 }; 338 339 /* Parse ACPI0011 _DSD button descriptors */ 340 static struct soc_button_info *soc_button_get_button_info(struct device *dev) 341 { 342 struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER }; 343 const union acpi_object *desc, *el0, *uuid, *btns_desc = NULL; 344 struct soc_button_info *button_info; 345 acpi_status status; 346 int i, btn, collection_uid = -1; 347 348 status = acpi_evaluate_object_typed(ACPI_HANDLE(dev), "_DSD", NULL, 349 &buf, ACPI_TYPE_PACKAGE); 350 if (ACPI_FAILURE(status)) { 351 dev_err(dev, "ACPI _DSD object not found\n"); 352 return ERR_PTR(-ENODEV); 353 } 354 355 /* Look for the Button Descriptors UUID */ 356 desc = buf.pointer; 357 for (i = 0; (i + 1) < desc->package.count; i += 2) { 358 uuid = &desc->package.elements[i]; 359 360 if (uuid->type != ACPI_TYPE_BUFFER || 361 uuid->buffer.length != 16 || 362 desc->package.elements[i + 1].type != ACPI_TYPE_PACKAGE) { 363 break; 364 } 365 366 if (memcmp(uuid->buffer.pointer, btns_desc_uuid, 16) == 0) { 367 btns_desc = &desc->package.elements[i + 1]; 368 break; 369 } 370 } 371 372 if (!btns_desc) { 373 dev_err(dev, "ACPI Button Descriptors not found\n"); 374 button_info = ERR_PTR(-ENODEV); 375 goto out; 376 } 377 378 /* The first package describes the collection */ 379 el0 = &btns_desc->package.elements[0]; 380 if (el0->type == ACPI_TYPE_PACKAGE && 381 el0->package.count == 5 && 382 /* First byte should be 0 (collection) */ 383 soc_button_get_acpi_object_int(&el0->package.elements[0]) == 0 && 384 /* Third byte should be 0 (top level collection) */ 385 soc_button_get_acpi_object_int(&el0->package.elements[2]) == 0) { 386 collection_uid = soc_button_get_acpi_object_int( 387 &el0->package.elements[1]); 388 } 389 if (collection_uid == -1) { 390 dev_err(dev, "Invalid Button Collection Descriptor\n"); 391 button_info = ERR_PTR(-ENODEV); 392 goto out; 393 } 394 395 /* There are package.count - 1 buttons + 1 terminating empty entry */ 396 button_info = devm_kcalloc(dev, btns_desc->package.count, 397 sizeof(*button_info), GFP_KERNEL); 398 if (!button_info) { 399 button_info = ERR_PTR(-ENOMEM); 400 goto out; 401 } 402 403 /* Parse the button descriptors */ 404 for (i = 1, btn = 0; i < btns_desc->package.count; i++, btn++) { 405 if (soc_button_parse_btn_desc(dev, 406 &btns_desc->package.elements[i], 407 collection_uid, 408 &button_info[btn])) { 409 button_info = ERR_PTR(-ENODEV); 410 goto out; 411 } 412 } 413 414 out: 415 kfree(buf.pointer); 416 return button_info; 417 } 418 419 static int soc_button_remove(struct platform_device *pdev) 420 { 421 struct soc_button_data *priv = platform_get_drvdata(pdev); 422 423 int i; 424 425 for (i = 0; i < BUTTON_TYPES; i++) 426 if (priv->children[i]) 427 platform_device_unregister(priv->children[i]); 428 429 return 0; 430 } 431 432 static int soc_button_probe(struct platform_device *pdev) 433 { 434 struct device *dev = &pdev->dev; 435 const struct soc_device_data *device_data; 436 const struct soc_button_info *button_info; 437 struct soc_button_data *priv; 438 struct platform_device *pd; 439 int i; 440 int error; 441 442 device_data = acpi_device_get_match_data(dev); 443 if (device_data && device_data->check) { 444 error = device_data->check(dev); 445 if (error) 446 return error; 447 } 448 449 if (device_data && device_data->button_info) { 450 button_info = device_data->button_info; 451 } else { 452 button_info = soc_button_get_button_info(dev); 453 if (IS_ERR(button_info)) 454 return PTR_ERR(button_info); 455 } 456 457 error = gpiod_count(dev, NULL); 458 if (error < 0) { 459 dev_dbg(dev, "no GPIO attached, ignoring...\n"); 460 return -ENODEV; 461 } 462 463 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); 464 if (!priv) 465 return -ENOMEM; 466 467 platform_set_drvdata(pdev, priv); 468 469 for (i = 0; i < BUTTON_TYPES; i++) { 470 pd = soc_button_device_create(pdev, button_info, i == 0); 471 if (IS_ERR(pd)) { 472 error = PTR_ERR(pd); 473 if (error != -ENODEV) { 474 soc_button_remove(pdev); 475 return error; 476 } 477 continue; 478 } 479 480 priv->children[i] = pd; 481 } 482 483 if (!priv->children[0] && !priv->children[1]) 484 return -ENODEV; 485 486 if (!device_data || !device_data->button_info) 487 devm_kfree(dev, button_info); 488 489 return 0; 490 } 491 492 /* 493 * Definition of buttons on the tablet. The ACPI index of each button 494 * is defined in section 2.8.7.2 of "Windows ACPI Design Guide for SoC 495 * Platforms" 496 */ 497 static const struct soc_button_info soc_button_PNP0C40[] = { 498 { "power", 0, EV_KEY, KEY_POWER, false, true, true }, 499 { "home", 1, EV_KEY, KEY_LEFTMETA, false, true, true }, 500 { "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false, true }, 501 { "volume_down", 3, EV_KEY, KEY_VOLUMEDOWN, true, false, true }, 502 { "rotation_lock", 4, EV_KEY, KEY_ROTATE_LOCK_TOGGLE, false, false, true }, 503 { } 504 }; 505 506 static const struct soc_device_data soc_device_PNP0C40 = { 507 .button_info = soc_button_PNP0C40, 508 }; 509 510 static const struct soc_button_info soc_button_INT33D3[] = { 511 { "tablet_mode", 0, EV_SW, SW_TABLET_MODE, false, false, false }, 512 { } 513 }; 514 515 static const struct soc_device_data soc_device_INT33D3 = { 516 .button_info = soc_button_INT33D3, 517 }; 518 519 /* 520 * Button info for Microsoft Surface 3 (non pro), this is indentical to 521 * the PNP0C40 info except that the home button is active-high. 522 * 523 * The Surface 3 Pro also has a MSHW0028 ACPI device, but that uses a custom 524 * version of the drivers/platform/x86/intel/hid.c 5 button array ACPI API 525 * instead. A check() callback is not necessary though as the Surface 3 Pro 526 * MSHW0028 ACPI device's resource table does not contain any GPIOs. 527 */ 528 static const struct soc_button_info soc_button_MSHW0028[] = { 529 { "power", 0, EV_KEY, KEY_POWER, false, true, true }, 530 { "home", 1, EV_KEY, KEY_LEFTMETA, false, true, false }, 531 { "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false, true }, 532 { "volume_down", 3, EV_KEY, KEY_VOLUMEDOWN, true, false, true }, 533 { } 534 }; 535 536 static const struct soc_device_data soc_device_MSHW0028 = { 537 .button_info = soc_button_MSHW0028, 538 }; 539 540 /* 541 * Special device check for Surface Book 2 and Surface Pro (2017). 542 * Both, the Surface Pro 4 (surfacepro3_button.c) and the above mentioned 543 * devices use MSHW0040 for power and volume buttons, however the way they 544 * have to be addressed differs. Make sure that we only load this drivers 545 * for the correct devices by checking the OEM Platform Revision provided by 546 * the _DSM method. 547 */ 548 #define MSHW0040_DSM_REVISION 0x01 549 #define MSHW0040_DSM_GET_OMPR 0x02 // get OEM Platform Revision 550 static const guid_t MSHW0040_DSM_UUID = 551 GUID_INIT(0x6fd05c69, 0xcde3, 0x49f4, 0x95, 0xed, 0xab, 0x16, 0x65, 552 0x49, 0x80, 0x35); 553 554 static int soc_device_check_MSHW0040(struct device *dev) 555 { 556 acpi_handle handle = ACPI_HANDLE(dev); 557 union acpi_object *result; 558 u64 oem_platform_rev = 0; // valid revisions are nonzero 559 560 // get OEM platform revision 561 result = acpi_evaluate_dsm_typed(handle, &MSHW0040_DSM_UUID, 562 MSHW0040_DSM_REVISION, 563 MSHW0040_DSM_GET_OMPR, NULL, 564 ACPI_TYPE_INTEGER); 565 566 if (result) { 567 oem_platform_rev = result->integer.value; 568 ACPI_FREE(result); 569 } 570 571 /* 572 * If the revision is zero here, the _DSM evaluation has failed. This 573 * indicates that we have a Pro 4 or Book 1 and this driver should not 574 * be used. 575 */ 576 if (oem_platform_rev == 0) 577 return -ENODEV; 578 579 dev_dbg(dev, "OEM Platform Revision %llu\n", oem_platform_rev); 580 581 return 0; 582 } 583 584 /* 585 * Button infos for Microsoft Surface Book 2 and Surface Pro (2017). 586 * Obtained from DSDT/testing. 587 */ 588 static const struct soc_button_info soc_button_MSHW0040[] = { 589 { "power", 0, EV_KEY, KEY_POWER, false, true, true }, 590 { "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false, true }, 591 { "volume_down", 4, EV_KEY, KEY_VOLUMEDOWN, true, false, true }, 592 { } 593 }; 594 595 static const struct soc_device_data soc_device_MSHW0040 = { 596 .button_info = soc_button_MSHW0040, 597 .check = soc_device_check_MSHW0040, 598 }; 599 600 static const struct acpi_device_id soc_button_acpi_match[] = { 601 { "PNP0C40", (unsigned long)&soc_device_PNP0C40 }, 602 { "INT33D3", (unsigned long)&soc_device_INT33D3 }, 603 { "ID9001", (unsigned long)&soc_device_INT33D3 }, 604 { "ACPI0011", 0 }, 605 606 /* Microsoft Surface Devices (3th, 5th and 6th generation) */ 607 { "MSHW0028", (unsigned long)&soc_device_MSHW0028 }, 608 { "MSHW0040", (unsigned long)&soc_device_MSHW0040 }, 609 610 { } 611 }; 612 613 MODULE_DEVICE_TABLE(acpi, soc_button_acpi_match); 614 615 static struct platform_driver soc_button_driver = { 616 .probe = soc_button_probe, 617 .remove = soc_button_remove, 618 .driver = { 619 .name = KBUILD_MODNAME, 620 .acpi_match_table = ACPI_PTR(soc_button_acpi_match), 621 }, 622 }; 623 module_platform_driver(soc_button_driver); 624 625 MODULE_LICENSE("GPL"); 626