xref: /openbmc/linux/drivers/input/misc/kxtj9.c (revision aeb64ff3) 
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2011 Kionix, Inc.
4  * Written by Chris Hudson <chudson@kionix.com>
5  */
6 
7 #include <linux/delay.h>
8 #include <linux/i2c.h>
9 #include <linux/input.h>
10 #include <linux/interrupt.h>
11 #include <linux/module.h>
12 #include <linux/slab.h>
13 #include <linux/input/kxtj9.h>
14 
15 #define NAME			"kxtj9"
16 #define G_MAX			8000
17 /* OUTPUT REGISTERS */
18 #define XOUT_L			0x06
19 #define WHO_AM_I		0x0F
20 /* CONTROL REGISTERS */
21 #define INT_REL			0x1A
22 #define CTRL_REG1		0x1B
23 #define INT_CTRL1		0x1E
24 #define DATA_CTRL		0x21
25 /* CONTROL REGISTER 1 BITS */
26 #define PC1_OFF			0x7F
27 #define PC1_ON			(1 << 7)
28 /* Data ready funtion enable bit: set during probe if using irq mode */
29 #define DRDYE			(1 << 5)
30 /* DATA CONTROL REGISTER BITS */
31 #define ODR12_5F		0
32 #define ODR25F			1
33 #define ODR50F			2
34 #define ODR100F		3
35 #define ODR200F		4
36 #define ODR400F		5
37 #define ODR800F		6
38 /* INTERRUPT CONTROL REGISTER 1 BITS */
39 /* Set these during probe if using irq mode */
40 #define KXTJ9_IEL		(1 << 3)
41 #define KXTJ9_IEA		(1 << 4)
42 #define KXTJ9_IEN		(1 << 5)
43 /* INPUT_ABS CONSTANTS */
44 #define FUZZ			3
45 #define FLAT			3
46 /* RESUME STATE INDICES */
47 #define RES_DATA_CTRL		0
48 #define RES_CTRL_REG1		1
49 #define RES_INT_CTRL1		2
50 #define RESUME_ENTRIES		3
51 
52 /*
53  * The following table lists the maximum appropriate poll interval for each
54  * available output data rate.
55  */
56 static const struct {
57 	unsigned int cutoff;
58 	u8 mask;
59 } kxtj9_odr_table[] = {
60 	{ 3,	ODR800F },
61 	{ 5,	ODR400F },
62 	{ 10,	ODR200F },
63 	{ 20,	ODR100F },
64 	{ 40,	ODR50F  },
65 	{ 80,	ODR25F  },
66 	{ 0,	ODR12_5F},
67 };
68 
69 struct kxtj9_data {
70 	struct i2c_client *client;
71 	struct kxtj9_platform_data pdata;
72 	struct input_dev *input_dev;
73 	unsigned int last_poll_interval;
74 	u8 shift;
75 	u8 ctrl_reg1;
76 	u8 data_ctrl;
77 	u8 int_ctrl;
78 };
79 
80 static int kxtj9_i2c_read(struct kxtj9_data *tj9, u8 addr, u8 *data, int len)
81 {
82 	struct i2c_msg msgs[] = {
83 		{
84 			.addr = tj9->client->addr,
85 			.flags = tj9->client->flags,
86 			.len = 1,
87 			.buf = &addr,
88 		},
89 		{
90 			.addr = tj9->client->addr,
91 			.flags = tj9->client->flags | I2C_M_RD,
92 			.len = len,
93 			.buf = data,
94 		},
95 	};
96 
97 	return i2c_transfer(tj9->client->adapter, msgs, 2);
98 }
99 
100 static void kxtj9_report_acceleration_data(struct kxtj9_data *tj9)
101 {
102 	s16 acc_data[3]; /* Data bytes from hardware xL, xH, yL, yH, zL, zH */
103 	s16 x, y, z;
104 	int err;
105 
106 	err = kxtj9_i2c_read(tj9, XOUT_L, (u8 *)acc_data, 6);
107 	if (err < 0)
108 		dev_err(&tj9->client->dev, "accelerometer data read failed\n");
109 
110 	x = le16_to_cpu(acc_data[tj9->pdata.axis_map_x]);
111 	y = le16_to_cpu(acc_data[tj9->pdata.axis_map_y]);
112 	z = le16_to_cpu(acc_data[tj9->pdata.axis_map_z]);
113 
114 	x >>= tj9->shift;
115 	y >>= tj9->shift;
116 	z >>= tj9->shift;
117 
118 	input_report_abs(tj9->input_dev, ABS_X, tj9->pdata.negate_x ? -x : x);
119 	input_report_abs(tj9->input_dev, ABS_Y, tj9->pdata.negate_y ? -y : y);
120 	input_report_abs(tj9->input_dev, ABS_Z, tj9->pdata.negate_z ? -z : z);
121 	input_sync(tj9->input_dev);
122 }
123 
124 static irqreturn_t kxtj9_isr(int irq, void *dev)
125 {
126 	struct kxtj9_data *tj9 = dev;
127 	int err;
128 
129 	/* data ready is the only possible interrupt type */
130 	kxtj9_report_acceleration_data(tj9);
131 
132 	err = i2c_smbus_read_byte_data(tj9->client, INT_REL);
133 	if (err < 0)
134 		dev_err(&tj9->client->dev,
135 			"error clearing interrupt status: %d\n", err);
136 
137 	return IRQ_HANDLED;
138 }
139 
140 static int kxtj9_update_g_range(struct kxtj9_data *tj9, u8 new_g_range)
141 {
142 	switch (new_g_range) {
143 	case KXTJ9_G_2G:
144 		tj9->shift = 4;
145 		break;
146 	case KXTJ9_G_4G:
147 		tj9->shift = 3;
148 		break;
149 	case KXTJ9_G_8G:
150 		tj9->shift = 2;
151 		break;
152 	default:
153 		return -EINVAL;
154 	}
155 
156 	tj9->ctrl_reg1 &= 0xe7;
157 	tj9->ctrl_reg1 |= new_g_range;
158 
159 	return 0;
160 }
161 
162 static int kxtj9_update_odr(struct kxtj9_data *tj9, unsigned int poll_interval)
163 {
164 	int err;
165 	int i;
166 
167 	/* Use the lowest ODR that can support the requested poll interval */
168 	for (i = 0; i < ARRAY_SIZE(kxtj9_odr_table); i++) {
169 		tj9->data_ctrl = kxtj9_odr_table[i].mask;
170 		if (poll_interval < kxtj9_odr_table[i].cutoff)
171 			break;
172 	}
173 
174 	err = i2c_smbus_write_byte_data(tj9->client, CTRL_REG1, 0);
175 	if (err < 0)
176 		return err;
177 
178 	err = i2c_smbus_write_byte_data(tj9->client, DATA_CTRL, tj9->data_ctrl);
179 	if (err < 0)
180 		return err;
181 
182 	err = i2c_smbus_write_byte_data(tj9->client, CTRL_REG1, tj9->ctrl_reg1);
183 	if (err < 0)
184 		return err;
185 
186 	return 0;
187 }
188 
189 static int kxtj9_device_power_on(struct kxtj9_data *tj9)
190 {
191 	if (tj9->pdata.power_on)
192 		return tj9->pdata.power_on();
193 
194 	return 0;
195 }
196 
197 static void kxtj9_device_power_off(struct kxtj9_data *tj9)
198 {
199 	int err;
200 
201 	tj9->ctrl_reg1 &= PC1_OFF;
202 	err = i2c_smbus_write_byte_data(tj9->client, CTRL_REG1, tj9->ctrl_reg1);
203 	if (err < 0)
204 		dev_err(&tj9->client->dev, "soft power off failed\n");
205 
206 	if (tj9->pdata.power_off)
207 		tj9->pdata.power_off();
208 }
209 
210 static int kxtj9_enable(struct kxtj9_data *tj9)
211 {
212 	int err;
213 
214 	err = kxtj9_device_power_on(tj9);
215 	if (err < 0)
216 		return err;
217 
218 	/* ensure that PC1 is cleared before updating control registers */
219 	err = i2c_smbus_write_byte_data(tj9->client, CTRL_REG1, 0);
220 	if (err < 0)
221 		return err;
222 
223 	/* only write INT_CTRL_REG1 if in irq mode */
224 	if (tj9->client->irq) {
225 		err = i2c_smbus_write_byte_data(tj9->client,
226 						INT_CTRL1, tj9->int_ctrl);
227 		if (err < 0)
228 			return err;
229 	}
230 
231 	err = kxtj9_update_g_range(tj9, tj9->pdata.g_range);
232 	if (err < 0)
233 		return err;
234 
235 	/* turn on outputs */
236 	tj9->ctrl_reg1 |= PC1_ON;
237 	err = i2c_smbus_write_byte_data(tj9->client, CTRL_REG1, tj9->ctrl_reg1);
238 	if (err < 0)
239 		return err;
240 
241 	err = kxtj9_update_odr(tj9, tj9->last_poll_interval);
242 	if (err < 0)
243 		return err;
244 
245 	/* clear initial interrupt if in irq mode */
246 	if (tj9->client->irq) {
247 		err = i2c_smbus_read_byte_data(tj9->client, INT_REL);
248 		if (err < 0) {
249 			dev_err(&tj9->client->dev,
250 				"error clearing interrupt: %d\n", err);
251 			goto fail;
252 		}
253 	}
254 
255 	return 0;
256 
257 fail:
258 	kxtj9_device_power_off(tj9);
259 	return err;
260 }
261 
262 static void kxtj9_disable(struct kxtj9_data *tj9)
263 {
264 	kxtj9_device_power_off(tj9);
265 }
266 
267 static int kxtj9_input_open(struct input_dev *input)
268 {
269 	struct kxtj9_data *tj9 = input_get_drvdata(input);
270 
271 	return kxtj9_enable(tj9);
272 }
273 
274 static void kxtj9_input_close(struct input_dev *dev)
275 {
276 	struct kxtj9_data *tj9 = input_get_drvdata(dev);
277 
278 	kxtj9_disable(tj9);
279 }
280 
281 /*
282  * When IRQ mode is selected, we need to provide an interface to allow the user
283  * to change the output data rate of the part.  For consistency, we are using
284  * the set_poll method, which accepts a poll interval in milliseconds, and then
285  * calls update_odr() while passing this value as an argument.  In IRQ mode, the
286  * data outputs will not be read AT the requested poll interval, rather, the
287  * lowest ODR that can support the requested interval.  The client application
288  * will be responsible for retrieving data from the input node at the desired
289  * interval.
290  */
291 
292 /* Returns currently selected poll interval (in ms) */
293 static ssize_t kxtj9_get_poll(struct device *dev,
294 				struct device_attribute *attr, char *buf)
295 {
296 	struct i2c_client *client = to_i2c_client(dev);
297 	struct kxtj9_data *tj9 = i2c_get_clientdata(client);
298 
299 	return sprintf(buf, "%d\n", tj9->last_poll_interval);
300 }
301 
302 /* Allow users to select a new poll interval (in ms) */
303 static ssize_t kxtj9_set_poll(struct device *dev, struct device_attribute *attr,
304 						const char *buf, size_t count)
305 {
306 	struct i2c_client *client = to_i2c_client(dev);
307 	struct kxtj9_data *tj9 = i2c_get_clientdata(client);
308 	struct input_dev *input_dev = tj9->input_dev;
309 	unsigned int interval;
310 	int error;
311 
312 	error = kstrtouint(buf, 10, &interval);
313 	if (error < 0)
314 		return error;
315 
316 	/* Lock the device to prevent races with open/close (and itself) */
317 	mutex_lock(&input_dev->mutex);
318 
319 	disable_irq(client->irq);
320 
321 	/*
322 	 * Set current interval to the greater of the minimum interval or
323 	 * the requested interval
324 	 */
325 	tj9->last_poll_interval = max(interval, tj9->pdata.min_interval);
326 
327 	kxtj9_update_odr(tj9, tj9->last_poll_interval);
328 
329 	enable_irq(client->irq);
330 	mutex_unlock(&input_dev->mutex);
331 
332 	return count;
333 }
334 
335 static DEVICE_ATTR(poll, S_IRUGO|S_IWUSR, kxtj9_get_poll, kxtj9_set_poll);
336 
337 static struct attribute *kxtj9_attributes[] = {
338 	&dev_attr_poll.attr,
339 	NULL
340 };
341 
342 static struct attribute_group kxtj9_attribute_group = {
343 	.attrs = kxtj9_attributes
344 };
345 
346 static void kxtj9_poll(struct input_dev *input)
347 {
348 	struct kxtj9_data *tj9 = input_get_drvdata(input);
349 	unsigned int poll_interval = input_get_poll_interval(input);
350 
351 	kxtj9_report_acceleration_data(tj9);
352 
353 	if (poll_interval != tj9->last_poll_interval) {
354 		kxtj9_update_odr(tj9, poll_interval);
355 		tj9->last_poll_interval = poll_interval;
356 	}
357 }
358 
359 static void kxtj9_platform_exit(void *data)
360 {
361 	struct kxtj9_data *tj9 = data;
362 
363 	if (tj9->pdata.exit)
364 		tj9->pdata.exit();
365 }
366 
367 static int kxtj9_verify(struct kxtj9_data *tj9)
368 {
369 	int retval;
370 
371 	retval = kxtj9_device_power_on(tj9);
372 	if (retval < 0)
373 		return retval;
374 
375 	retval = i2c_smbus_read_byte_data(tj9->client, WHO_AM_I);
376 	if (retval < 0) {
377 		dev_err(&tj9->client->dev, "read err int source\n");
378 		goto out;
379 	}
380 
381 	retval = (retval != 0x07 && retval != 0x08) ? -EIO : 0;
382 
383 out:
384 	kxtj9_device_power_off(tj9);
385 	return retval;
386 }
387 
388 static int kxtj9_probe(struct i2c_client *client,
389 		       const struct i2c_device_id *id)
390 {
391 	const struct kxtj9_platform_data *pdata =
392 			dev_get_platdata(&client->dev);
393 	struct kxtj9_data *tj9;
394 	struct input_dev *input_dev;
395 	int err;
396 
397 	if (!i2c_check_functionality(client->adapter,
398 				I2C_FUNC_I2C | I2C_FUNC_SMBUS_BYTE_DATA)) {
399 		dev_err(&client->dev, "client is not i2c capable\n");
400 		return -ENXIO;
401 	}
402 
403 	if (!pdata) {
404 		dev_err(&client->dev, "platform data is NULL; exiting\n");
405 		return -EINVAL;
406 	}
407 
408 	tj9 = devm_kzalloc(&client->dev, sizeof(*tj9), GFP_KERNEL);
409 	if (!tj9) {
410 		dev_err(&client->dev,
411 			"failed to allocate memory for module data\n");
412 		return -ENOMEM;
413 	}
414 
415 	tj9->client = client;
416 	tj9->pdata = *pdata;
417 
418 	if (pdata->init) {
419 		err = pdata->init();
420 		if (err < 0)
421 			return err;
422 	}
423 
424 	err = devm_add_action_or_reset(&client->dev, kxtj9_platform_exit, tj9);
425 	if (err)
426 		return err;
427 
428 	err = kxtj9_verify(tj9);
429 	if (err < 0) {
430 		dev_err(&client->dev, "device not recognized\n");
431 		return err;
432 	}
433 
434 	i2c_set_clientdata(client, tj9);
435 
436 	tj9->ctrl_reg1 = tj9->pdata.res_12bit | tj9->pdata.g_range;
437 	tj9->last_poll_interval = tj9->pdata.init_interval;
438 
439 	input_dev = devm_input_allocate_device(&client->dev);
440 	if (!input_dev) {
441 		dev_err(&client->dev, "input device allocate failed\n");
442 		return -ENOMEM;
443 	}
444 
445 	input_set_drvdata(input_dev, tj9);
446 	tj9->input_dev = input_dev;
447 
448 	input_dev->name = "kxtj9_accel";
449 	input_dev->id.bustype = BUS_I2C;
450 
451 	input_dev->open = kxtj9_input_open;
452 	input_dev->close = kxtj9_input_close;
453 
454 	input_set_abs_params(input_dev, ABS_X, -G_MAX, G_MAX, FUZZ, FLAT);
455 	input_set_abs_params(input_dev, ABS_Y, -G_MAX, G_MAX, FUZZ, FLAT);
456 	input_set_abs_params(input_dev, ABS_Z, -G_MAX, G_MAX, FUZZ, FLAT);
457 
458 	if (client->irq <= 0) {
459 		err = input_setup_polling(input_dev, kxtj9_poll);
460 		if (err)
461 			return err;
462 	}
463 
464 	err = input_register_device(input_dev);
465 	if (err) {
466 		dev_err(&client->dev,
467 			"unable to register input polled device %s: %d\n",
468 			input_dev->name, err);
469 		return err;
470 	}
471 
472 	if (client->irq) {
473 		/* If in irq mode, populate INT_CTRL_REG1 and enable DRDY. */
474 		tj9->int_ctrl |= KXTJ9_IEN | KXTJ9_IEA | KXTJ9_IEL;
475 		tj9->ctrl_reg1 |= DRDYE;
476 
477 		err = devm_request_threaded_irq(&client->dev, client->irq,
478 						NULL, kxtj9_isr,
479 						IRQF_TRIGGER_RISING |
480 							IRQF_ONESHOT,
481 						"kxtj9-irq", tj9);
482 		if (err) {
483 			dev_err(&client->dev, "request irq failed: %d\n", err);
484 			return err;
485 		}
486 
487 		err = devm_device_add_group(&client->dev,
488 					    &kxtj9_attribute_group);
489 		if (err) {
490 			dev_err(&client->dev, "sysfs create failed: %d\n", err);
491 			return err;
492 		}
493 	}
494 
495 	return 0;
496 }
497 
498 static int __maybe_unused kxtj9_suspend(struct device *dev)
499 {
500 	struct i2c_client *client = to_i2c_client(dev);
501 	struct kxtj9_data *tj9 = i2c_get_clientdata(client);
502 	struct input_dev *input_dev = tj9->input_dev;
503 
504 	mutex_lock(&input_dev->mutex);
505 
506 	if (input_dev->users)
507 		kxtj9_disable(tj9);
508 
509 	mutex_unlock(&input_dev->mutex);
510 	return 0;
511 }
512 
513 static int __maybe_unused kxtj9_resume(struct device *dev)
514 {
515 	struct i2c_client *client = to_i2c_client(dev);
516 	struct kxtj9_data *tj9 = i2c_get_clientdata(client);
517 	struct input_dev *input_dev = tj9->input_dev;
518 
519 	mutex_lock(&input_dev->mutex);
520 
521 	if (input_dev->users)
522 		kxtj9_enable(tj9);
523 
524 	mutex_unlock(&input_dev->mutex);
525 	return 0;
526 }
527 
528 static SIMPLE_DEV_PM_OPS(kxtj9_pm_ops, kxtj9_suspend, kxtj9_resume);
529 
530 static const struct i2c_device_id kxtj9_id[] = {
531 	{ NAME, 0 },
532 	{ },
533 };
534 
535 MODULE_DEVICE_TABLE(i2c, kxtj9_id);
536 
537 static struct i2c_driver kxtj9_driver = {
538 	.driver = {
539 		.name	= NAME,
540 		.pm	= &kxtj9_pm_ops,
541 	},
542 	.probe		= kxtj9_probe,
543 	.id_table	= kxtj9_id,
544 };
545 
546 module_i2c_driver(kxtj9_driver);
547 
548 MODULE_DESCRIPTION("KXTJ9 accelerometer driver");
549 MODULE_AUTHOR("Chris Hudson <chudson@kionix.com>");
550 MODULE_LICENSE("GPL");
551