1 /* 2 * DRV2667 haptics driver family 3 * 4 * Author: Dan Murphy <dmurphy@ti.com> 5 * 6 * Copyright: (C) 2014 Texas Instruments, Inc. 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 as 10 * published by the Free Software Foundation. 11 * 12 * This program is distributed in the hope that it will be useful, but 13 * WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 15 * General Public License for more details. 16 */ 17 18 #include <linux/i2c.h> 19 #include <linux/input.h> 20 #include <linux/module.h> 21 #include <linux/platform_device.h> 22 #include <linux/regmap.h> 23 #include <linux/slab.h> 24 #include <linux/delay.h> 25 #include <linux/regulator/consumer.h> 26 27 /* Contol registers */ 28 #define DRV2667_STATUS 0x00 29 #define DRV2667_CTRL_1 0x01 30 #define DRV2667_CTRL_2 0x02 31 /* Waveform sequencer */ 32 #define DRV2667_WV_SEQ_0 0x03 33 #define DRV2667_WV_SEQ_1 0x04 34 #define DRV2667_WV_SEQ_2 0x05 35 #define DRV2667_WV_SEQ_3 0x06 36 #define DRV2667_WV_SEQ_4 0x07 37 #define DRV2667_WV_SEQ_5 0x08 38 #define DRV2667_WV_SEQ_6 0x09 39 #define DRV2667_WV_SEQ_7 0x0A 40 #define DRV2667_FIFO 0x0B 41 #define DRV2667_PAGE 0xFF 42 #define DRV2667_MAX_REG DRV2667_PAGE 43 44 #define DRV2667_PAGE_0 0x00 45 #define DRV2667_PAGE_1 0x01 46 #define DRV2667_PAGE_2 0x02 47 #define DRV2667_PAGE_3 0x03 48 #define DRV2667_PAGE_4 0x04 49 #define DRV2667_PAGE_5 0x05 50 #define DRV2667_PAGE_6 0x06 51 #define DRV2667_PAGE_7 0x07 52 #define DRV2667_PAGE_8 0x08 53 54 /* RAM fields */ 55 #define DRV2667_RAM_HDR_SZ 0x0 56 /* RAM Header addresses */ 57 #define DRV2667_RAM_START_HI 0x01 58 #define DRV2667_RAM_START_LO 0x02 59 #define DRV2667_RAM_STOP_HI 0x03 60 #define DRV2667_RAM_STOP_LO 0x04 61 #define DRV2667_RAM_REPEAT_CT 0x05 62 /* RAM data addresses */ 63 #define DRV2667_RAM_AMP 0x06 64 #define DRV2667_RAM_FREQ 0x07 65 #define DRV2667_RAM_DURATION 0x08 66 #define DRV2667_RAM_ENVELOPE 0x09 67 68 /* Control 1 Register */ 69 #define DRV2667_25_VPP_GAIN 0x00 70 #define DRV2667_50_VPP_GAIN 0x01 71 #define DRV2667_75_VPP_GAIN 0x02 72 #define DRV2667_100_VPP_GAIN 0x03 73 #define DRV2667_DIGITAL_IN 0xfc 74 #define DRV2667_ANALOG_IN (1 << 2) 75 76 /* Control 2 Register */ 77 #define DRV2667_GO (1 << 0) 78 #define DRV2667_STANDBY (1 << 6) 79 #define DRV2667_DEV_RST (1 << 7) 80 81 /* RAM Envelope settings */ 82 #define DRV2667_NO_ENV 0x00 83 #define DRV2667_32_MS_ENV 0x01 84 #define DRV2667_64_MS_ENV 0x02 85 #define DRV2667_96_MS_ENV 0x03 86 #define DRV2667_128_MS_ENV 0x04 87 #define DRV2667_160_MS_ENV 0x05 88 #define DRV2667_192_MS_ENV 0x06 89 #define DRV2667_224_MS_ENV 0x07 90 #define DRV2667_256_MS_ENV 0x08 91 #define DRV2667_512_MS_ENV 0x09 92 #define DRV2667_768_MS_ENV 0x0a 93 #define DRV2667_1024_MS_ENV 0x0b 94 #define DRV2667_1280_MS_ENV 0x0c 95 #define DRV2667_1536_MS_ENV 0x0d 96 #define DRV2667_1792_MS_ENV 0x0e 97 #define DRV2667_2048_MS_ENV 0x0f 98 99 /** 100 * struct drv2667_data - 101 * @input_dev - Pointer to the input device 102 * @client - Pointer to the I2C client 103 * @regmap - Register map of the device 104 * @work - Work item used to off load the enable/disable of the vibration 105 * @regulator - Pointer to the regulator for the IC 106 * @magnitude - Magnitude of the vibration event 107 **/ 108 struct drv2667_data { 109 struct input_dev *input_dev; 110 struct i2c_client *client; 111 struct regmap *regmap; 112 struct work_struct work; 113 struct regulator *regulator; 114 u32 page; 115 u32 magnitude; 116 u32 frequency; 117 }; 118 119 static struct reg_default drv2667_reg_defs[] = { 120 { DRV2667_STATUS, 0x02 }, 121 { DRV2667_CTRL_1, 0x28 }, 122 { DRV2667_CTRL_2, 0x40 }, 123 { DRV2667_WV_SEQ_0, 0x00 }, 124 { DRV2667_WV_SEQ_1, 0x00 }, 125 { DRV2667_WV_SEQ_2, 0x00 }, 126 { DRV2667_WV_SEQ_3, 0x00 }, 127 { DRV2667_WV_SEQ_4, 0x00 }, 128 { DRV2667_WV_SEQ_5, 0x00 }, 129 { DRV2667_WV_SEQ_6, 0x00 }, 130 { DRV2667_WV_SEQ_7, 0x00 }, 131 { DRV2667_FIFO, 0x00 }, 132 { DRV2667_PAGE, 0x00 }, 133 }; 134 135 static int drv2667_set_waveform_freq(struct drv2667_data *haptics) 136 { 137 unsigned int read_buf; 138 int freq; 139 int error; 140 141 /* Per the data sheet: 142 * Sinusoid Frequency (Hz) = 7.8125 x Frequency 143 */ 144 freq = (haptics->frequency * 1000) / 78125; 145 if (freq <= 0) { 146 dev_err(&haptics->client->dev, 147 "ERROR: Frequency calculated to %i\n", freq); 148 return -EINVAL; 149 } 150 151 error = regmap_read(haptics->regmap, DRV2667_PAGE, &read_buf); 152 if (error) { 153 dev_err(&haptics->client->dev, 154 "Failed to read the page number: %d\n", error); 155 return -EIO; 156 } 157 158 if (read_buf == DRV2667_PAGE_0 || 159 haptics->page != read_buf) { 160 error = regmap_write(haptics->regmap, 161 DRV2667_PAGE, haptics->page); 162 if (error) { 163 dev_err(&haptics->client->dev, 164 "Failed to set the page: %d\n", error); 165 return -EIO; 166 } 167 } 168 169 error = regmap_write(haptics->regmap, DRV2667_RAM_FREQ, freq); 170 if (error) 171 dev_err(&haptics->client->dev, 172 "Failed to set the frequency: %d\n", error); 173 174 /* Reset back to original page */ 175 if (read_buf == DRV2667_PAGE_0 || 176 haptics->page != read_buf) { 177 error = regmap_write(haptics->regmap, DRV2667_PAGE, read_buf); 178 if (error) { 179 dev_err(&haptics->client->dev, 180 "Failed to set the page: %d\n", error); 181 return -EIO; 182 } 183 } 184 185 return error; 186 } 187 188 static void drv2667_worker(struct work_struct *work) 189 { 190 struct drv2667_data *haptics = container_of(work, struct drv2667_data, work); 191 int error; 192 193 if (haptics->magnitude) { 194 error = regmap_write(haptics->regmap, 195 DRV2667_PAGE, haptics->page); 196 if (error) { 197 dev_err(&haptics->client->dev, 198 "Failed to set the page: %d\n", error); 199 return; 200 } 201 202 error = regmap_write(haptics->regmap, DRV2667_RAM_AMP, 203 haptics->magnitude); 204 if (error) { 205 dev_err(&haptics->client->dev, 206 "Failed to set the amplitude: %d\n", error); 207 return; 208 } 209 210 error = regmap_write(haptics->regmap, 211 DRV2667_PAGE, DRV2667_PAGE_0); 212 if (error) { 213 dev_err(&haptics->client->dev, 214 "Failed to set the page: %d\n", error); 215 return; 216 } 217 218 error = regmap_write(haptics->regmap, 219 DRV2667_CTRL_2, DRV2667_GO); 220 if (error) { 221 dev_err(&haptics->client->dev, 222 "Failed to set the GO bit: %d\n", error); 223 } 224 } else { 225 error = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2, 226 DRV2667_GO, 0); 227 if (error) { 228 dev_err(&haptics->client->dev, 229 "Failed to unset the GO bit: %d\n", error); 230 } 231 } 232 } 233 234 static int drv2667_haptics_play(struct input_dev *input, void *data, 235 struct ff_effect *effect) 236 { 237 struct drv2667_data *haptics = input_get_drvdata(input); 238 239 if (effect->u.rumble.strong_magnitude > 0) 240 haptics->magnitude = effect->u.rumble.strong_magnitude; 241 else if (effect->u.rumble.weak_magnitude > 0) 242 haptics->magnitude = effect->u.rumble.weak_magnitude; 243 else 244 haptics->magnitude = 0; 245 246 schedule_work(&haptics->work); 247 248 return 0; 249 } 250 251 static void drv2667_close(struct input_dev *input) 252 { 253 struct drv2667_data *haptics = input_get_drvdata(input); 254 int error; 255 256 cancel_work_sync(&haptics->work); 257 258 error = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2, 259 DRV2667_STANDBY, 1); 260 if (error) 261 dev_err(&haptics->client->dev, 262 "Failed to enter standby mode: %d\n", error); 263 } 264 265 static const struct reg_default drv2667_init_regs[] = { 266 { DRV2667_CTRL_2, 0 }, 267 { DRV2667_CTRL_1, DRV2667_25_VPP_GAIN }, 268 { DRV2667_WV_SEQ_0, 1 }, 269 { DRV2667_WV_SEQ_1, 0 } 270 }; 271 272 static const struct reg_default drv2667_page1_init[] = { 273 { DRV2667_RAM_HDR_SZ, 0x05 }, 274 { DRV2667_RAM_START_HI, 0x80 }, 275 { DRV2667_RAM_START_LO, 0x06 }, 276 { DRV2667_RAM_STOP_HI, 0x00 }, 277 { DRV2667_RAM_STOP_LO, 0x09 }, 278 { DRV2667_RAM_REPEAT_CT, 0 }, 279 { DRV2667_RAM_DURATION, 0x05 }, 280 { DRV2667_RAM_ENVELOPE, DRV2667_NO_ENV }, 281 { DRV2667_RAM_AMP, 0x60 }, 282 }; 283 284 static int drv2667_init(struct drv2667_data *haptics) 285 { 286 int error; 287 288 /* Set default haptic frequency to 195Hz on Page 1*/ 289 haptics->frequency = 195; 290 haptics->page = DRV2667_PAGE_1; 291 292 error = regmap_register_patch(haptics->regmap, 293 drv2667_init_regs, 294 ARRAY_SIZE(drv2667_init_regs)); 295 if (error) { 296 dev_err(&haptics->client->dev, 297 "Failed to write init registers: %d\n", 298 error); 299 return error; 300 } 301 302 error = regmap_write(haptics->regmap, DRV2667_PAGE, haptics->page); 303 if (error) { 304 dev_err(&haptics->client->dev, "Failed to set page: %d\n", 305 error); 306 goto error_out; 307 } 308 309 error = drv2667_set_waveform_freq(haptics); 310 if (error) 311 goto error_page; 312 313 error = regmap_register_patch(haptics->regmap, 314 drv2667_page1_init, 315 ARRAY_SIZE(drv2667_page1_init)); 316 if (error) { 317 dev_err(&haptics->client->dev, 318 "Failed to write page registers: %d\n", 319 error); 320 return error; 321 } 322 323 error = regmap_write(haptics->regmap, DRV2667_PAGE, DRV2667_PAGE_0); 324 return error; 325 326 error_page: 327 regmap_write(haptics->regmap, DRV2667_PAGE, DRV2667_PAGE_0); 328 error_out: 329 return error; 330 } 331 332 static const struct regmap_config drv2667_regmap_config = { 333 .reg_bits = 8, 334 .val_bits = 8, 335 336 .max_register = DRV2667_MAX_REG, 337 .reg_defaults = drv2667_reg_defs, 338 .num_reg_defaults = ARRAY_SIZE(drv2667_reg_defs), 339 .cache_type = REGCACHE_NONE, 340 }; 341 342 static int drv2667_probe(struct i2c_client *client, 343 const struct i2c_device_id *id) 344 { 345 struct drv2667_data *haptics; 346 int error; 347 348 haptics = devm_kzalloc(&client->dev, sizeof(*haptics), GFP_KERNEL); 349 if (!haptics) 350 return -ENOMEM; 351 352 haptics->regulator = devm_regulator_get(&client->dev, "vbat"); 353 if (IS_ERR(haptics->regulator)) { 354 error = PTR_ERR(haptics->regulator); 355 dev_err(&client->dev, 356 "unable to get regulator, error: %d\n", error); 357 return error; 358 } 359 360 haptics->input_dev = devm_input_allocate_device(&client->dev); 361 if (!haptics->input_dev) { 362 dev_err(&client->dev, "Failed to allocate input device\n"); 363 return -ENOMEM; 364 } 365 366 haptics->input_dev->name = "drv2667:haptics"; 367 haptics->input_dev->dev.parent = client->dev.parent; 368 haptics->input_dev->close = drv2667_close; 369 input_set_drvdata(haptics->input_dev, haptics); 370 input_set_capability(haptics->input_dev, EV_FF, FF_RUMBLE); 371 372 error = input_ff_create_memless(haptics->input_dev, NULL, 373 drv2667_haptics_play); 374 if (error) { 375 dev_err(&client->dev, "input_ff_create() failed: %d\n", 376 error); 377 return error; 378 } 379 380 INIT_WORK(&haptics->work, drv2667_worker); 381 382 haptics->client = client; 383 i2c_set_clientdata(client, haptics); 384 385 haptics->regmap = devm_regmap_init_i2c(client, &drv2667_regmap_config); 386 if (IS_ERR(haptics->regmap)) { 387 error = PTR_ERR(haptics->regmap); 388 dev_err(&client->dev, "Failed to allocate register map: %d\n", 389 error); 390 return error; 391 } 392 393 error = drv2667_init(haptics); 394 if (error) { 395 dev_err(&client->dev, "Device init failed: %d\n", error); 396 return error; 397 } 398 399 error = input_register_device(haptics->input_dev); 400 if (error) { 401 dev_err(&client->dev, "couldn't register input device: %d\n", 402 error); 403 return error; 404 } 405 406 return 0; 407 } 408 409 static int __maybe_unused drv2667_suspend(struct device *dev) 410 { 411 struct drv2667_data *haptics = dev_get_drvdata(dev); 412 int ret = 0; 413 414 mutex_lock(&haptics->input_dev->mutex); 415 416 if (haptics->input_dev->users) { 417 ret = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2, 418 DRV2667_STANDBY, 1); 419 if (ret) { 420 dev_err(dev, "Failed to set standby mode\n"); 421 regulator_disable(haptics->regulator); 422 goto out; 423 } 424 425 ret = regulator_disable(haptics->regulator); 426 if (ret) { 427 dev_err(dev, "Failed to disable regulator\n"); 428 regmap_update_bits(haptics->regmap, 429 DRV2667_CTRL_2, 430 DRV2667_STANDBY, 0); 431 } 432 } 433 out: 434 mutex_unlock(&haptics->input_dev->mutex); 435 return ret; 436 } 437 438 static int __maybe_unused drv2667_resume(struct device *dev) 439 { 440 struct drv2667_data *haptics = dev_get_drvdata(dev); 441 int ret = 0; 442 443 mutex_lock(&haptics->input_dev->mutex); 444 445 if (haptics->input_dev->users) { 446 ret = regulator_enable(haptics->regulator); 447 if (ret) { 448 dev_err(dev, "Failed to enable regulator\n"); 449 goto out; 450 } 451 452 ret = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2, 453 DRV2667_STANDBY, 0); 454 if (ret) { 455 dev_err(dev, "Failed to unset standby mode\n"); 456 regulator_disable(haptics->regulator); 457 goto out; 458 } 459 460 } 461 462 out: 463 mutex_unlock(&haptics->input_dev->mutex); 464 return ret; 465 } 466 467 static SIMPLE_DEV_PM_OPS(drv2667_pm_ops, drv2667_suspend, drv2667_resume); 468 469 static const struct i2c_device_id drv2667_id[] = { 470 { "drv2667", 0 }, 471 { } 472 }; 473 MODULE_DEVICE_TABLE(i2c, drv2667_id); 474 475 #ifdef CONFIG_OF 476 static const struct of_device_id drv2667_of_match[] = { 477 { .compatible = "ti,drv2667", }, 478 { } 479 }; 480 MODULE_DEVICE_TABLE(of, drv2667_of_match); 481 #endif 482 483 static struct i2c_driver drv2667_driver = { 484 .probe = drv2667_probe, 485 .driver = { 486 .name = "drv2667-haptics", 487 .owner = THIS_MODULE, 488 .of_match_table = of_match_ptr(drv2667_of_match), 489 .pm = &drv2667_pm_ops, 490 }, 491 .id_table = drv2667_id, 492 }; 493 module_i2c_driver(drv2667_driver); 494 495 MODULE_DESCRIPTION("TI DRV2667 haptics driver"); 496 MODULE_LICENSE("GPL"); 497 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>"); 498