1 /* 2 * Driver for the VoIP USB phones with CM109 chipsets. 3 * 4 * Copyright (C) 2007 - 2008 Alfred E. Heggestad <aeh@db.org> 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public License as 8 * published by the Free Software Foundation, version 2. 9 */ 10 11 /* 12 * Tested devices: 13 * - Komunikate KIP1000 14 * - Genius G-talk 15 * - Allied-Telesis Corega USBPH01 16 * - ... 17 * 18 * This driver is based on the yealink.c driver 19 * 20 * Thanks to: 21 * - Authors of yealink.c 22 * - Thomas Reitmayr 23 * - Oliver Neukum for good review comments and code 24 * - Shaun Jackman <sjackman@gmail.com> for Genius G-talk keymap 25 * - Dmitry Torokhov for valuable input and review 26 * 27 * Todo: 28 * - Read/write EEPROM 29 */ 30 31 #include <linux/kernel.h> 32 #include <linux/init.h> 33 #include <linux/slab.h> 34 #include <linux/module.h> 35 #include <linux/moduleparam.h> 36 #include <linux/rwsem.h> 37 #include <linux/usb/input.h> 38 39 #define DRIVER_VERSION "20080805" 40 #define DRIVER_AUTHOR "Alfred E. Heggestad" 41 #define DRIVER_DESC "CM109 phone driver" 42 43 static char *phone = "kip1000"; 44 module_param(phone, charp, S_IRUSR); 45 MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}"); 46 47 enum { 48 /* HID Registers */ 49 HID_IR0 = 0x00, /* Record/Playback-mute button, Volume up/down */ 50 HID_IR1 = 0x01, /* GPI, generic registers or EEPROM_DATA0 */ 51 HID_IR2 = 0x02, /* Generic registers or EEPROM_DATA1 */ 52 HID_IR3 = 0x03, /* Generic registers or EEPROM_CTRL */ 53 HID_OR0 = 0x00, /* Mapping control, buzzer, SPDIF (offset 0x04) */ 54 HID_OR1 = 0x01, /* GPO - General Purpose Output */ 55 HID_OR2 = 0x02, /* Set GPIO to input/output mode */ 56 HID_OR3 = 0x03, /* SPDIF status channel or EEPROM_CTRL */ 57 58 /* HID_IR0 */ 59 RECORD_MUTE = 1 << 3, 60 PLAYBACK_MUTE = 1 << 2, 61 VOLUME_DOWN = 1 << 1, 62 VOLUME_UP = 1 << 0, 63 64 /* HID_OR0 */ 65 /* bits 7-6 66 0: HID_OR1-2 are used for GPO; HID_OR0, 3 are used for buzzer 67 and SPDIF 68 1: HID_OR0-3 are used as generic HID registers 69 2: Values written to HID_OR0-3 are also mapped to MCU_CTRL, 70 EEPROM_DATA0-1, EEPROM_CTRL (see Note) 71 3: Reserved 72 */ 73 HID_OR_GPO_BUZ_SPDIF = 0 << 6, 74 HID_OR_GENERIC_HID_REG = 1 << 6, 75 HID_OR_MAP_MCU_EEPROM = 2 << 6, 76 77 BUZZER_ON = 1 << 5, 78 79 /* up to 256 normal keys, up to 16 special keys */ 80 KEYMAP_SIZE = 256 + 16, 81 }; 82 83 /* CM109 protocol packet */ 84 struct cm109_ctl_packet { 85 u8 byte[4]; 86 } __attribute__ ((packed)); 87 88 enum { USB_PKT_LEN = sizeof(struct cm109_ctl_packet) }; 89 90 /* CM109 device structure */ 91 struct cm109_dev { 92 struct input_dev *idev; /* input device */ 93 struct usb_device *udev; /* usb device */ 94 struct usb_interface *intf; 95 96 /* irq input channel */ 97 struct cm109_ctl_packet *irq_data; 98 dma_addr_t irq_dma; 99 struct urb *urb_irq; 100 101 /* control output channel */ 102 struct cm109_ctl_packet *ctl_data; 103 dma_addr_t ctl_dma; 104 struct usb_ctrlrequest *ctl_req; 105 struct urb *urb_ctl; 106 /* 107 * The 3 bitfields below are protected by ctl_submit_lock. 108 * They have to be separate since they are accessed from IRQ 109 * context. 110 */ 111 unsigned irq_urb_pending:1; /* irq_urb is in flight */ 112 unsigned ctl_urb_pending:1; /* ctl_urb is in flight */ 113 unsigned buzzer_pending:1; /* need to issue buzz command */ 114 spinlock_t ctl_submit_lock; 115 116 unsigned char buzzer_state; /* on/off */ 117 118 /* flags */ 119 unsigned open:1; 120 unsigned resetting:1; 121 unsigned shutdown:1; 122 123 /* This mutex protects writes to the above flags */ 124 struct mutex pm_mutex; 125 126 unsigned short keymap[KEYMAP_SIZE]; 127 128 char phys[64]; /* physical device path */ 129 int key_code; /* last reported key */ 130 int keybit; /* 0=new scan 1,2,4,8=scan columns */ 131 u8 gpi; /* Cached value of GPI (high nibble) */ 132 }; 133 134 /****************************************************************************** 135 * CM109 key interface 136 *****************************************************************************/ 137 138 static unsigned short special_keymap(int code) 139 { 140 if (code > 0xff) { 141 switch (code - 0xff) { 142 case RECORD_MUTE: return KEY_MUTE; 143 case PLAYBACK_MUTE: return KEY_MUTE; 144 case VOLUME_DOWN: return KEY_VOLUMEDOWN; 145 case VOLUME_UP: return KEY_VOLUMEUP; 146 } 147 } 148 return KEY_RESERVED; 149 } 150 151 /* Map device buttons to internal key events. 152 * 153 * The "up" and "down" keys, are symbolised by arrows on the button. 154 * The "pickup" and "hangup" keys are symbolised by a green and red phone 155 * on the button. 156 157 Komunikate KIP1000 Keyboard Matrix 158 159 -> -- 1 -- 2 -- 3 --> GPI pin 4 (0x10) 160 | | | | 161 <- -- 4 -- 5 -- 6 --> GPI pin 5 (0x20) 162 | | | | 163 END - 7 -- 8 -- 9 --> GPI pin 6 (0x40) 164 | | | | 165 OK -- * -- 0 -- # --> GPI pin 7 (0x80) 166 | | | | 167 168 /|\ /|\ /|\ /|\ 169 | | | | 170 GPO 171 pin: 3 2 1 0 172 0x8 0x4 0x2 0x1 173 174 */ 175 static unsigned short keymap_kip1000(int scancode) 176 { 177 switch (scancode) { /* phone key: */ 178 case 0x82: return KEY_NUMERIC_0; /* 0 */ 179 case 0x14: return KEY_NUMERIC_1; /* 1 */ 180 case 0x12: return KEY_NUMERIC_2; /* 2 */ 181 case 0x11: return KEY_NUMERIC_3; /* 3 */ 182 case 0x24: return KEY_NUMERIC_4; /* 4 */ 183 case 0x22: return KEY_NUMERIC_5; /* 5 */ 184 case 0x21: return KEY_NUMERIC_6; /* 6 */ 185 case 0x44: return KEY_NUMERIC_7; /* 7 */ 186 case 0x42: return KEY_NUMERIC_8; /* 8 */ 187 case 0x41: return KEY_NUMERIC_9; /* 9 */ 188 case 0x81: return KEY_NUMERIC_POUND; /* # */ 189 case 0x84: return KEY_NUMERIC_STAR; /* * */ 190 case 0x88: return KEY_ENTER; /* pickup */ 191 case 0x48: return KEY_ESC; /* hangup */ 192 case 0x28: return KEY_LEFT; /* IN */ 193 case 0x18: return KEY_RIGHT; /* OUT */ 194 default: return special_keymap(scancode); 195 } 196 } 197 198 /* 199 Contributed by Shaun Jackman <sjackman@gmail.com> 200 201 Genius G-Talk keyboard matrix 202 0 1 2 3 203 4: 0 4 8 Talk 204 5: 1 5 9 End 205 6: 2 6 # Up 206 7: 3 7 * Down 207 */ 208 static unsigned short keymap_gtalk(int scancode) 209 { 210 switch (scancode) { 211 case 0x11: return KEY_NUMERIC_0; 212 case 0x21: return KEY_NUMERIC_1; 213 case 0x41: return KEY_NUMERIC_2; 214 case 0x81: return KEY_NUMERIC_3; 215 case 0x12: return KEY_NUMERIC_4; 216 case 0x22: return KEY_NUMERIC_5; 217 case 0x42: return KEY_NUMERIC_6; 218 case 0x82: return KEY_NUMERIC_7; 219 case 0x14: return KEY_NUMERIC_8; 220 case 0x24: return KEY_NUMERIC_9; 221 case 0x44: return KEY_NUMERIC_POUND; /* # */ 222 case 0x84: return KEY_NUMERIC_STAR; /* * */ 223 case 0x18: return KEY_ENTER; /* Talk (green handset) */ 224 case 0x28: return KEY_ESC; /* End (red handset) */ 225 case 0x48: return KEY_UP; /* Menu up (rocker switch) */ 226 case 0x88: return KEY_DOWN; /* Menu down (rocker switch) */ 227 default: return special_keymap(scancode); 228 } 229 } 230 231 /* 232 * Keymap for Allied-Telesis Corega USBPH01 233 * http://www.alliedtelesis-corega.com/2/1344/1437/1360/chprd.html 234 * 235 * Contributed by july@nat.bg 236 */ 237 static unsigned short keymap_usbph01(int scancode) 238 { 239 switch (scancode) { 240 case 0x11: return KEY_NUMERIC_0; /* 0 */ 241 case 0x21: return KEY_NUMERIC_1; /* 1 */ 242 case 0x41: return KEY_NUMERIC_2; /* 2 */ 243 case 0x81: return KEY_NUMERIC_3; /* 3 */ 244 case 0x12: return KEY_NUMERIC_4; /* 4 */ 245 case 0x22: return KEY_NUMERIC_5; /* 5 */ 246 case 0x42: return KEY_NUMERIC_6; /* 6 */ 247 case 0x82: return KEY_NUMERIC_7; /* 7 */ 248 case 0x14: return KEY_NUMERIC_8; /* 8 */ 249 case 0x24: return KEY_NUMERIC_9; /* 9 */ 250 case 0x44: return KEY_NUMERIC_POUND; /* # */ 251 case 0x84: return KEY_NUMERIC_STAR; /* * */ 252 case 0x18: return KEY_ENTER; /* pickup */ 253 case 0x28: return KEY_ESC; /* hangup */ 254 case 0x48: return KEY_LEFT; /* IN */ 255 case 0x88: return KEY_RIGHT; /* OUT */ 256 default: return special_keymap(scancode); 257 } 258 } 259 260 /* 261 * Keymap for ATCom AU-100 262 * http://www.atcom.cn/products.html 263 * http://www.packetizer.com/products/au100/ 264 * http://www.voip-info.org/wiki/view/AU-100 265 * 266 * Contributed by daniel@gimpelevich.san-francisco.ca.us 267 */ 268 static unsigned short keymap_atcom(int scancode) 269 { 270 switch (scancode) { /* phone key: */ 271 case 0x82: return KEY_NUMERIC_0; /* 0 */ 272 case 0x11: return KEY_NUMERIC_1; /* 1 */ 273 case 0x12: return KEY_NUMERIC_2; /* 2 */ 274 case 0x14: return KEY_NUMERIC_3; /* 3 */ 275 case 0x21: return KEY_NUMERIC_4; /* 4 */ 276 case 0x22: return KEY_NUMERIC_5; /* 5 */ 277 case 0x24: return KEY_NUMERIC_6; /* 6 */ 278 case 0x41: return KEY_NUMERIC_7; /* 7 */ 279 case 0x42: return KEY_NUMERIC_8; /* 8 */ 280 case 0x44: return KEY_NUMERIC_9; /* 9 */ 281 case 0x84: return KEY_NUMERIC_POUND; /* # */ 282 case 0x81: return KEY_NUMERIC_STAR; /* * */ 283 case 0x18: return KEY_ENTER; /* pickup */ 284 case 0x28: return KEY_ESC; /* hangup */ 285 case 0x48: return KEY_LEFT; /* left arrow */ 286 case 0x88: return KEY_RIGHT; /* right arrow */ 287 default: return special_keymap(scancode); 288 } 289 } 290 291 static unsigned short (*keymap)(int) = keymap_kip1000; 292 293 /* 294 * Completes a request by converting the data into events for the 295 * input subsystem. 296 */ 297 static void report_key(struct cm109_dev *dev, int key) 298 { 299 struct input_dev *idev = dev->idev; 300 301 if (dev->key_code >= 0) { 302 /* old key up */ 303 input_report_key(idev, dev->key_code, 0); 304 } 305 306 dev->key_code = key; 307 if (key >= 0) { 308 /* new valid key */ 309 input_report_key(idev, key, 1); 310 } 311 312 input_sync(idev); 313 } 314 315 /****************************************************************************** 316 * CM109 usb communication interface 317 *****************************************************************************/ 318 319 static void cm109_submit_buzz_toggle(struct cm109_dev *dev) 320 { 321 int error; 322 323 if (dev->buzzer_state) 324 dev->ctl_data->byte[HID_OR0] |= BUZZER_ON; 325 else 326 dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON; 327 328 error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC); 329 if (error) 330 dev_err(&dev->intf->dev, 331 "%s: usb_submit_urb (urb_ctl) failed %d\n", 332 __func__, error); 333 } 334 335 /* 336 * IRQ handler 337 */ 338 static void cm109_urb_irq_callback(struct urb *urb) 339 { 340 struct cm109_dev *dev = urb->context; 341 const int status = urb->status; 342 int error; 343 344 dev_dbg(&dev->intf->dev, "### URB IRQ: [0x%02x 0x%02x 0x%02x 0x%02x] keybit=0x%02x\n", 345 dev->irq_data->byte[0], 346 dev->irq_data->byte[1], 347 dev->irq_data->byte[2], 348 dev->irq_data->byte[3], 349 dev->keybit); 350 351 if (status) { 352 if (status == -ESHUTDOWN) 353 return; 354 dev_err(&dev->intf->dev, "%s: urb status %d\n", __func__, status); 355 } 356 357 /* Special keys */ 358 if (dev->irq_data->byte[HID_IR0] & 0x0f) { 359 const int code = (dev->irq_data->byte[HID_IR0] & 0x0f); 360 report_key(dev, dev->keymap[0xff + code]); 361 } 362 363 /* Scan key column */ 364 if (dev->keybit == 0xf) { 365 366 /* Any changes ? */ 367 if ((dev->gpi & 0xf0) == (dev->irq_data->byte[HID_IR1] & 0xf0)) 368 goto out; 369 370 dev->gpi = dev->irq_data->byte[HID_IR1] & 0xf0; 371 dev->keybit = 0x1; 372 } else { 373 report_key(dev, dev->keymap[dev->irq_data->byte[HID_IR1]]); 374 375 dev->keybit <<= 1; 376 if (dev->keybit > 0x8) 377 dev->keybit = 0xf; 378 } 379 380 out: 381 382 spin_lock(&dev->ctl_submit_lock); 383 384 dev->irq_urb_pending = 0; 385 386 if (likely(!dev->shutdown)) { 387 388 if (dev->buzzer_state) 389 dev->ctl_data->byte[HID_OR0] |= BUZZER_ON; 390 else 391 dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON; 392 393 dev->ctl_data->byte[HID_OR1] = dev->keybit; 394 dev->ctl_data->byte[HID_OR2] = dev->keybit; 395 396 dev->buzzer_pending = 0; 397 dev->ctl_urb_pending = 1; 398 399 error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC); 400 if (error) 401 dev_err(&dev->intf->dev, 402 "%s: usb_submit_urb (urb_ctl) failed %d\n", 403 __func__, error); 404 } 405 406 spin_unlock(&dev->ctl_submit_lock); 407 } 408 409 static void cm109_urb_ctl_callback(struct urb *urb) 410 { 411 struct cm109_dev *dev = urb->context; 412 const int status = urb->status; 413 int error; 414 415 dev_dbg(&dev->intf->dev, "### URB CTL: [0x%02x 0x%02x 0x%02x 0x%02x]\n", 416 dev->ctl_data->byte[0], 417 dev->ctl_data->byte[1], 418 dev->ctl_data->byte[2], 419 dev->ctl_data->byte[3]); 420 421 if (status) 422 dev_err(&dev->intf->dev, "%s: urb status %d\n", __func__, status); 423 424 spin_lock(&dev->ctl_submit_lock); 425 426 dev->ctl_urb_pending = 0; 427 428 if (likely(!dev->shutdown)) { 429 430 if (dev->buzzer_pending) { 431 dev->buzzer_pending = 0; 432 dev->ctl_urb_pending = 1; 433 cm109_submit_buzz_toggle(dev); 434 } else if (likely(!dev->irq_urb_pending)) { 435 /* ask for key data */ 436 dev->irq_urb_pending = 1; 437 error = usb_submit_urb(dev->urb_irq, GFP_ATOMIC); 438 if (error) 439 dev_err(&dev->intf->dev, 440 "%s: usb_submit_urb (urb_irq) failed %d\n", 441 __func__, error); 442 } 443 } 444 445 spin_unlock(&dev->ctl_submit_lock); 446 } 447 448 static void cm109_toggle_buzzer_async(struct cm109_dev *dev) 449 { 450 unsigned long flags; 451 452 spin_lock_irqsave(&dev->ctl_submit_lock, flags); 453 454 if (dev->ctl_urb_pending) { 455 /* URB completion will resubmit */ 456 dev->buzzer_pending = 1; 457 } else { 458 dev->ctl_urb_pending = 1; 459 cm109_submit_buzz_toggle(dev); 460 } 461 462 spin_unlock_irqrestore(&dev->ctl_submit_lock, flags); 463 } 464 465 static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on) 466 { 467 int error; 468 469 if (on) 470 dev->ctl_data->byte[HID_OR0] |= BUZZER_ON; 471 else 472 dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON; 473 474 error = usb_control_msg(dev->udev, 475 usb_sndctrlpipe(dev->udev, 0), 476 dev->ctl_req->bRequest, 477 dev->ctl_req->bRequestType, 478 le16_to_cpu(dev->ctl_req->wValue), 479 le16_to_cpu(dev->ctl_req->wIndex), 480 dev->ctl_data, 481 USB_PKT_LEN, USB_CTRL_SET_TIMEOUT); 482 if (error < 0 && error != -EINTR) 483 dev_err(&dev->intf->dev, "%s: usb_control_msg() failed %d\n", 484 __func__, error); 485 } 486 487 static void cm109_stop_traffic(struct cm109_dev *dev) 488 { 489 dev->shutdown = 1; 490 /* 491 * Make sure other CPUs see this 492 */ 493 smp_wmb(); 494 495 usb_kill_urb(dev->urb_ctl); 496 usb_kill_urb(dev->urb_irq); 497 498 cm109_toggle_buzzer_sync(dev, 0); 499 500 dev->shutdown = 0; 501 smp_wmb(); 502 } 503 504 static void cm109_restore_state(struct cm109_dev *dev) 505 { 506 if (dev->open) { 507 /* 508 * Restore buzzer state. 509 * This will also kick regular URB submission 510 */ 511 cm109_toggle_buzzer_async(dev); 512 } 513 } 514 515 /****************************************************************************** 516 * input event interface 517 *****************************************************************************/ 518 519 static int cm109_input_open(struct input_dev *idev) 520 { 521 struct cm109_dev *dev = input_get_drvdata(idev); 522 int error; 523 524 error = usb_autopm_get_interface(dev->intf); 525 if (error < 0) { 526 dev_err(&idev->dev, "%s - cannot autoresume, result %d\n", 527 __func__, error); 528 return error; 529 } 530 531 mutex_lock(&dev->pm_mutex); 532 533 dev->buzzer_state = 0; 534 dev->key_code = -1; /* no keys pressed */ 535 dev->keybit = 0xf; 536 537 /* issue INIT */ 538 dev->ctl_data->byte[HID_OR0] = HID_OR_GPO_BUZ_SPDIF; 539 dev->ctl_data->byte[HID_OR1] = dev->keybit; 540 dev->ctl_data->byte[HID_OR2] = dev->keybit; 541 dev->ctl_data->byte[HID_OR3] = 0x00; 542 543 error = usb_submit_urb(dev->urb_ctl, GFP_KERNEL); 544 if (error) 545 dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n", 546 __func__, error); 547 else 548 dev->open = 1; 549 550 mutex_unlock(&dev->pm_mutex); 551 552 if (error) 553 usb_autopm_put_interface(dev->intf); 554 555 return error; 556 } 557 558 static void cm109_input_close(struct input_dev *idev) 559 { 560 struct cm109_dev *dev = input_get_drvdata(idev); 561 562 mutex_lock(&dev->pm_mutex); 563 564 /* 565 * Once we are here event delivery is stopped so we 566 * don't need to worry about someone starting buzzer 567 * again 568 */ 569 cm109_stop_traffic(dev); 570 dev->open = 0; 571 572 mutex_unlock(&dev->pm_mutex); 573 574 usb_autopm_put_interface(dev->intf); 575 } 576 577 static int cm109_input_ev(struct input_dev *idev, unsigned int type, 578 unsigned int code, int value) 579 { 580 struct cm109_dev *dev = input_get_drvdata(idev); 581 582 dev_dbg(&dev->intf->dev, 583 "input_ev: type=%u code=%u value=%d\n", type, code, value); 584 585 if (type != EV_SND) 586 return -EINVAL; 587 588 switch (code) { 589 case SND_TONE: 590 case SND_BELL: 591 dev->buzzer_state = !!value; 592 if (!dev->resetting) 593 cm109_toggle_buzzer_async(dev); 594 return 0; 595 596 default: 597 return -EINVAL; 598 } 599 } 600 601 602 /****************************************************************************** 603 * Linux interface and usb initialisation 604 *****************************************************************************/ 605 606 struct driver_info { 607 char *name; 608 }; 609 610 static const struct driver_info info_cm109 = { 611 .name = "CM109 USB driver", 612 }; 613 614 enum { 615 VENDOR_ID = 0x0d8c, /* C-Media Electronics */ 616 PRODUCT_ID_CM109 = 0x000e, /* CM109 defines range 0x0008 - 0x000f */ 617 }; 618 619 /* table of devices that work with this driver */ 620 static const struct usb_device_id cm109_usb_table[] = { 621 { 622 .match_flags = USB_DEVICE_ID_MATCH_DEVICE | 623 USB_DEVICE_ID_MATCH_INT_INFO, 624 .idVendor = VENDOR_ID, 625 .idProduct = PRODUCT_ID_CM109, 626 .bInterfaceClass = USB_CLASS_HID, 627 .bInterfaceSubClass = 0, 628 .bInterfaceProtocol = 0, 629 .driver_info = (kernel_ulong_t) &info_cm109 630 }, 631 /* you can add more devices here with product ID 0x0008 - 0x000f */ 632 { } 633 }; 634 635 static void cm109_usb_cleanup(struct cm109_dev *dev) 636 { 637 kfree(dev->ctl_req); 638 if (dev->ctl_data) 639 usb_free_coherent(dev->udev, USB_PKT_LEN, 640 dev->ctl_data, dev->ctl_dma); 641 if (dev->irq_data) 642 usb_free_coherent(dev->udev, USB_PKT_LEN, 643 dev->irq_data, dev->irq_dma); 644 645 usb_free_urb(dev->urb_irq); /* parameter validation in core/urb */ 646 usb_free_urb(dev->urb_ctl); /* parameter validation in core/urb */ 647 kfree(dev); 648 } 649 650 static void cm109_usb_disconnect(struct usb_interface *interface) 651 { 652 struct cm109_dev *dev = usb_get_intfdata(interface); 653 654 usb_set_intfdata(interface, NULL); 655 input_unregister_device(dev->idev); 656 cm109_usb_cleanup(dev); 657 } 658 659 static int cm109_usb_probe(struct usb_interface *intf, 660 const struct usb_device_id *id) 661 { 662 struct usb_device *udev = interface_to_usbdev(intf); 663 struct driver_info *nfo = (struct driver_info *)id->driver_info; 664 struct usb_host_interface *interface; 665 struct usb_endpoint_descriptor *endpoint; 666 struct cm109_dev *dev; 667 struct input_dev *input_dev = NULL; 668 int ret, pipe, i; 669 int error = -ENOMEM; 670 671 interface = intf->cur_altsetting; 672 endpoint = &interface->endpoint[0].desc; 673 674 if (!usb_endpoint_is_int_in(endpoint)) 675 return -ENODEV; 676 677 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 678 if (!dev) 679 return -ENOMEM; 680 681 spin_lock_init(&dev->ctl_submit_lock); 682 mutex_init(&dev->pm_mutex); 683 684 dev->udev = udev; 685 dev->intf = intf; 686 687 dev->idev = input_dev = input_allocate_device(); 688 if (!input_dev) 689 goto err_out; 690 691 /* allocate usb buffers */ 692 dev->irq_data = usb_alloc_coherent(udev, USB_PKT_LEN, 693 GFP_KERNEL, &dev->irq_dma); 694 if (!dev->irq_data) 695 goto err_out; 696 697 dev->ctl_data = usb_alloc_coherent(udev, USB_PKT_LEN, 698 GFP_KERNEL, &dev->ctl_dma); 699 if (!dev->ctl_data) 700 goto err_out; 701 702 dev->ctl_req = kmalloc(sizeof(*(dev->ctl_req)), GFP_KERNEL); 703 if (!dev->ctl_req) 704 goto err_out; 705 706 /* allocate urb structures */ 707 dev->urb_irq = usb_alloc_urb(0, GFP_KERNEL); 708 if (!dev->urb_irq) 709 goto err_out; 710 711 dev->urb_ctl = usb_alloc_urb(0, GFP_KERNEL); 712 if (!dev->urb_ctl) 713 goto err_out; 714 715 /* get a handle to the interrupt data pipe */ 716 pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress); 717 ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); 718 if (ret != USB_PKT_LEN) 719 dev_err(&intf->dev, "invalid payload size %d, expected %d\n", 720 ret, USB_PKT_LEN); 721 722 /* initialise irq urb */ 723 usb_fill_int_urb(dev->urb_irq, udev, pipe, dev->irq_data, 724 USB_PKT_LEN, 725 cm109_urb_irq_callback, dev, endpoint->bInterval); 726 dev->urb_irq->transfer_dma = dev->irq_dma; 727 dev->urb_irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; 728 dev->urb_irq->dev = udev; 729 730 /* initialise ctl urb */ 731 dev->ctl_req->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | 732 USB_DIR_OUT; 733 dev->ctl_req->bRequest = USB_REQ_SET_CONFIGURATION; 734 dev->ctl_req->wValue = cpu_to_le16(0x200); 735 dev->ctl_req->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber); 736 dev->ctl_req->wLength = cpu_to_le16(USB_PKT_LEN); 737 738 usb_fill_control_urb(dev->urb_ctl, udev, usb_sndctrlpipe(udev, 0), 739 (void *)dev->ctl_req, dev->ctl_data, USB_PKT_LEN, 740 cm109_urb_ctl_callback, dev); 741 dev->urb_ctl->transfer_dma = dev->ctl_dma; 742 dev->urb_ctl->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; 743 dev->urb_ctl->dev = udev; 744 745 /* find out the physical bus location */ 746 usb_make_path(udev, dev->phys, sizeof(dev->phys)); 747 strlcat(dev->phys, "/input0", sizeof(dev->phys)); 748 749 /* register settings for the input device */ 750 input_dev->name = nfo->name; 751 input_dev->phys = dev->phys; 752 usb_to_input_id(udev, &input_dev->id); 753 input_dev->dev.parent = &intf->dev; 754 755 input_set_drvdata(input_dev, dev); 756 input_dev->open = cm109_input_open; 757 input_dev->close = cm109_input_close; 758 input_dev->event = cm109_input_ev; 759 760 input_dev->keycode = dev->keymap; 761 input_dev->keycodesize = sizeof(unsigned char); 762 input_dev->keycodemax = ARRAY_SIZE(dev->keymap); 763 764 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_SND); 765 input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE); 766 767 /* register available key events */ 768 for (i = 0; i < KEYMAP_SIZE; i++) { 769 unsigned short k = keymap(i); 770 dev->keymap[i] = k; 771 __set_bit(k, input_dev->keybit); 772 } 773 __clear_bit(KEY_RESERVED, input_dev->keybit); 774 775 error = input_register_device(dev->idev); 776 if (error) 777 goto err_out; 778 779 usb_set_intfdata(intf, dev); 780 781 return 0; 782 783 err_out: 784 input_free_device(input_dev); 785 cm109_usb_cleanup(dev); 786 return error; 787 } 788 789 static int cm109_usb_suspend(struct usb_interface *intf, pm_message_t message) 790 { 791 struct cm109_dev *dev = usb_get_intfdata(intf); 792 793 dev_info(&intf->dev, "cm109: usb_suspend (event=%d)\n", message.event); 794 795 mutex_lock(&dev->pm_mutex); 796 cm109_stop_traffic(dev); 797 mutex_unlock(&dev->pm_mutex); 798 799 return 0; 800 } 801 802 static int cm109_usb_resume(struct usb_interface *intf) 803 { 804 struct cm109_dev *dev = usb_get_intfdata(intf); 805 806 dev_info(&intf->dev, "cm109: usb_resume\n"); 807 808 mutex_lock(&dev->pm_mutex); 809 cm109_restore_state(dev); 810 mutex_unlock(&dev->pm_mutex); 811 812 return 0; 813 } 814 815 static int cm109_usb_pre_reset(struct usb_interface *intf) 816 { 817 struct cm109_dev *dev = usb_get_intfdata(intf); 818 819 mutex_lock(&dev->pm_mutex); 820 821 /* 822 * Make sure input events don't try to toggle buzzer 823 * while we are resetting 824 */ 825 dev->resetting = 1; 826 smp_wmb(); 827 828 cm109_stop_traffic(dev); 829 830 return 0; 831 } 832 833 static int cm109_usb_post_reset(struct usb_interface *intf) 834 { 835 struct cm109_dev *dev = usb_get_intfdata(intf); 836 837 dev->resetting = 0; 838 smp_wmb(); 839 840 cm109_restore_state(dev); 841 842 mutex_unlock(&dev->pm_mutex); 843 844 return 0; 845 } 846 847 static struct usb_driver cm109_driver = { 848 .name = "cm109", 849 .probe = cm109_usb_probe, 850 .disconnect = cm109_usb_disconnect, 851 .suspend = cm109_usb_suspend, 852 .resume = cm109_usb_resume, 853 .reset_resume = cm109_usb_resume, 854 .pre_reset = cm109_usb_pre_reset, 855 .post_reset = cm109_usb_post_reset, 856 .id_table = cm109_usb_table, 857 .supports_autosuspend = 1, 858 }; 859 860 static int __init cm109_select_keymap(void) 861 { 862 /* Load the phone keymap */ 863 if (!strcasecmp(phone, "kip1000")) { 864 keymap = keymap_kip1000; 865 printk(KERN_INFO KBUILD_MODNAME ": " 866 "Keymap for Komunikate KIP1000 phone loaded\n"); 867 } else if (!strcasecmp(phone, "gtalk")) { 868 keymap = keymap_gtalk; 869 printk(KERN_INFO KBUILD_MODNAME ": " 870 "Keymap for Genius G-talk phone loaded\n"); 871 } else if (!strcasecmp(phone, "usbph01")) { 872 keymap = keymap_usbph01; 873 printk(KERN_INFO KBUILD_MODNAME ": " 874 "Keymap for Allied-Telesis Corega USBPH01 phone loaded\n"); 875 } else if (!strcasecmp(phone, "atcom")) { 876 keymap = keymap_atcom; 877 printk(KERN_INFO KBUILD_MODNAME ": " 878 "Keymap for ATCom AU-100 phone loaded\n"); 879 } else { 880 printk(KERN_ERR KBUILD_MODNAME ": " 881 "Unsupported phone: %s\n", phone); 882 return -EINVAL; 883 } 884 885 return 0; 886 } 887 888 static int __init cm109_init(void) 889 { 890 int err; 891 892 err = cm109_select_keymap(); 893 if (err) 894 return err; 895 896 err = usb_register(&cm109_driver); 897 if (err) 898 return err; 899 900 printk(KERN_INFO KBUILD_MODNAME ": " 901 DRIVER_DESC ": " DRIVER_VERSION " (C) " DRIVER_AUTHOR "\n"); 902 903 return 0; 904 } 905 906 static void __exit cm109_exit(void) 907 { 908 usb_deregister(&cm109_driver); 909 } 910 911 module_init(cm109_init); 912 module_exit(cm109_exit); 913 914 MODULE_DEVICE_TABLE(usb, cm109_usb_table); 915 916 MODULE_AUTHOR(DRIVER_AUTHOR); 917 MODULE_DESCRIPTION(DRIVER_DESC); 918 MODULE_LICENSE("GPL"); 919